Webauth redirection page title

Hi,
We are using webauth on an external web server. The controller redirects clients to this external web server successfully and the authentication process is working fine.
However, during the redirection process the following message appears as a page title:
"Cisco Systems Inc. Web Authentication Redirect"
for sometime and then disappears when the login page opens. (see attached sample snapshot)
As I understand, this temporary page is login.html which is on the controller flash.
How do we remove this message and redirect the client to the login page without showing this message?

HI,
Currently there is no way to remove that as the client traffic will hit the WLC first and then go to the external web server. You could use a custom web auth bundle on the WLC itself where you have full control over the web page on the WLC and change that text.
Thanks,
Lee

Similar Messages

Redirect page with POST method in JSTL

how to redirect page with POST method in JSTL.
below is the code that i make, but the page redirected with GET method,
so, the URL shown as http://localhost:8080/tes2/coba2.jsp?nama=saya
how to hide the parameter, so it didn't show at the URL..??
anybody help me..??
server1 -> coba1.jsp
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>coba1</title>
</head>
<body>
<c:url value="http://localhost:8080/tes2/coba2.jsp" var="displayURL">
<c:param name="nama" value="saya"/>
</c:url>
<c:redirect url="${displayURL}"/>
</body>
</html>server2->coba2.jsp
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<html>
<head>
<title>coba2</title>
</head>
<body>
<c:forEach items="${param}" var="currentParam">
        <li><c:out value="${currentParam.key}" />
            = <c:out value="${currentParam.value}" /></li>
      </c:forEach>
</body>
</html>

There are other two way communications methods as well. One such would be:
Server1Page1: Take response with parameters. Use HttpURLConnection to make a request to DataInputServlet
              on Server2 and send the parameters there with a POST operation
Server2DataInputServer: Takes request with data in it and starts a new session. Puts the data into the session and
              returns the session id to the requester
Server1Page1: Reads the response from the DataInputServer (the session id) and generates a sendRedirect to
              Server2's display page using the session id. Server1Page1 is now done.
Server2Page1: Gets a request from the client with the session id, and pulls the parameters out of the session. Then
              can continue as normal.Server2Page1 can also do a quick refresh to itself not using the session id as well, which will keep the URL visible by the client relatively clean.

Color in page title

Hi everybody.
</br></br>
My app is populated of colorful elements, which I used to use in Page titles,
</br>
but now I've a confusion:
</br></br>
A page element (P88_TITLE), has a current value of
</br></br>
[Display Hidden]
<span style="color:darkred;">Difference</span>
</br></br>
[Status U]
</br>
And an Application item (CUST_FILTER), has a current value of
</br>
<span style="color:orange;">- Active filter active </span><span style="color:darkgreen;">Customer Daily Planet</span>
</br></br>
My region title is:
</br>
&P88_TITLE. &CUST_FILTER.
</br></br>
The case is that only CUST_FILTER is displayed in color, while a grey legend <span style="color:darkred;">Difference</span> ignores the tags.
</br>
</br>
<span style="color:darkred;">Difference</span>
<span style="color:orange;">;- Active filter active </span><span style="color:darkgreen;">Customer Daily Planet</span>
</br>
</br>
What makes the difference by which an page element is not colored?
</br></br>
Thanks.

I'm redirecting to Apex forum

WebAuth redirect DNS Host not resolving

Hello,
I'm trying to get my WebAuth redirect for guest to resolve a hostname, not an IP address. If I delete the hostname information it redirect's fine to the IP address (but has a cert error). I'd like to have to redirect to a hostname so it will match the CN of the cert i've loaded on the controller. We're using OpenDNS for the public DNS so I cannot put an A Record on there associating 192.168.254.1 to washcoguest.co.washington.mn.us.
Right now when I connect to the SSID, it try's to direct me be cannot resolve the hostname and I get a page cannot be displayed.
Any help would be great.
Pete

Pete,
You can host that A record inside, but that would mean your guest need to have access to your inside DNS. Not ideal, but some people do that ...
Correct, you can host it with your ISP and it would need to match your domain. Which means you need a new cert.
For this very reason, I own "guestnetwork.org" and I host and provide certificates to get around all the confusion customers have. I can host XXXXXX.guestnetwork.org and its published in a few minutes and ready to go..
As for your NAT question. The Virtual IP should not be routable, which in your question its not, but just want to mention it. The client will need to reslove the name to the virtual IP. Adding all these extra steps only adds confusion.
I might suggest, redo the cert, publish it with yout ISP.

No Page title after migration from WSS 3.0 to SharePoint Foundation 2013

Dear community,
I have migrated serval sitecollections from WSS 3.0 (SharePoint 2007) to SharePoint 2010 Foundation and then to SharePoint Foundation 2013.
Now in SharePoint 2013 no page titles appears, but under the title "Homepage" appears. I'dont know where "Homepage" is come from. The title of the page is "Test". Changing the title has no effect. In SharePoint 2010 Foundation
the page titles appears correctly.
Does anyone have a solution for this problem?
Thank you very much and best regards,
Lucian

I compared the html code of the two sites.
Migrated site:
<h1 id="pageTitle" class="ms-core-pageTitle">
<span id="DeltaPlaceHolderPageTitleInTitleArea">
<label class="ms-hidden">Test Title</label>
</span>
<div id="DeltaPlaceHolderPageDescription" class="ms-displayInlineBlock ms-normalWrap">
<a href="javascript:;" id="ms-pageDescriptionDiv" style="display:none;">
<span id="ms-pageDescriptionImage"> </span>
</a>
<span class="ms-accessible" id="ms-pageDescription">
</span>
<script type="text/javascript">// <![CDATA[
_spBodyOnLoadFunctionNames.push("setupPageDescriptionCallout");
// ]]>
</script>
</div>
</h1>
Standard site:
<h1 id="pageTitle" class="ms-core-pageTitle">
<span id="DeltaPlaceHolderPageTitleInTitleArea">
Test Title
</span>
<div id="DeltaPlaceHolderPageDescription" class="ms-displayInlineBlock ms-normalWrap">
<a href="javascript:;" id="ms-pageDescriptionDiv" style="display:none;">
<span id="ms-pageDescriptionImage"> </span>
</a>
<span class="ms-accessible" id="ms-pageDescription">
</span>
<script type="text/javascript">// <![CDATA[
_spBodyOnLoadFunctionNames.push("setupPageDescriptionCallout");
// ]]>
</script>
</div>
</h1>
There is a .NET Code in the HTML Code of the migrated site:
<label class="ms-hidden">Test Title</label>

Change the Page Title for all the pages when viewing the Reports in Bi Publisher

Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.

As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home

How do you make the title bar display different text than the page title?

I'm looking for a way for the title bar display of my web page to be different than the text in the actual nav bar created by iWeb. For instance, I'd like the nav bar to just say Home for my main page, but in the title bar in the browser say "blah blah blah."
I know there has to be a way to do this. iWeb has actually done it on one page already, but I can't figure out how. I think it picked up the title bar text from the first text box in the page. For instance, the page name in the navigation bar is "blahs for today" but the browser title bar when you open that page says "blah blah," which happens to be the first line of text on the page. The page title in iWeb.app, though, is "blahs for today." But if I look at the source code it lists title as "blah blah."
I'm guessing I might be able to work around by making an invisible text box with the text that I want in the title bar as the very first thing on the page, and hope iWeb makes that the title bar text. I'd rather have a more correct way of doing it.
Is there a way of doing this in the source code without having to change a lot of stuff?
Thanks for any help.

Richard Kirkman1 wrote:
I think it picked up the title bar text from the first text box in the page. (...) I'm guessing I might be able to work around by making an invisible text box with the text that I want in the title bar...
Richard ~ The key is the default Title box that iWeb creates for every new page — it's that which you need to edit, not another text box you've created. And to make the text in that Title box invisible, see here.

Problems joining Wi-Fi networks that require viewing a redirect page in iOS 8.1.1? Check your "Auto-Login" setting.

Are you having problems joining previously used Wi-Fi networks that require you to view a login or redirect page (say to accept Terms of Use) first? The problem could be your Auto-Login Wi-Fi network setting.
I found numerous cases where I could not access in-store Wi-Fi networks (Nordstrom was one), hotel networks or in fact networks where you had to first view a Terms and Conditions page or where you had to login via a web form.
These were all networks I had used before.
This appears to be due to the "Auto-Login" setting assuming that once you (re)join a previously known network you can just go ahead and use it without further action. When the iOS device receives an error trying to use the network, it silently drops the Wi-Fi association.
If this is happening to you, follow these steps:
1) Go to Settings -> Wi-Fi
2) Select the network you want to join
3) When a check-mark appears next to the SSID, press the "i" button on the right hand side
4) Set Auto-Join however you want, but shut off the Auto-Login switch
5) Now attempt to use the network and you should be presented with the usual redirect page with terms you must accept or where you must login to use the Wi-Fi network in question
This cleared up the issue for me everywhere I had previously been having issues.

Just let me get one thing straight...you don't change don't do this for the PC you have your router plugged in to?
"For Vista:
1. Open Control Panel, Network and Internet, Network and Sharing Center, Manage Network Connections
2. If Wireless, Right click on your Wireless Network Connection, otherwise, Right click on Local Area Connection and click Properties
3. Highlight Internet Protocol Version 4(TCP/IPv4)
4. Click Properties
5. Tick Use the Following IP Address and enter the IP you want to use for that PC. I would start at 192.168.0.100(D-Link) and work your way up on each additional device. The second device would be 192.168.0.101, the 3rd, 192.168.0.102 and so on. Like I said, different brands of routers use different IP's, so it could be 192.168.1.100 and so on, so you will need to know the IP address of your router first.
6. Subnet Mask is 255.255.255.0 on all pc's and devices
7. Default Gateway is 192.168.0.1(D-Link) or whatever your router's IP is on all pc's and devices
8. Tick Use the Following DNS Server Address and enter 192.168.0.1(D-Link) or whatever your router's IP is and click OK.
9. You will need to do this on all Vista Pc's"

How to you change a page title in iWeb?

Not the page name, the title that appears at the top of the page when loaded.
It seams to grab random text to use as the page title
Example: the page title here is "Apple - Support - Discussions - Post Message: Thread"
The page name could be Joe for all we know.

I believe if you put some text in the page heading box on your page then that will be used as the title that appears at the top of your browser window. Whenever you start a new page you'll notice that as well as default pictures and body text boxes there is a page heading.
Message was edited by: Flynn

How to change the web page title of a web dynpro app?

Hello,
I would like to change the HTML page title of a web dynpro application without renaming the application component itself - but how?
Thanks for your comments!

Hi M Walter,
Assuming you are using Web Dynpro Java, you can change the title of the Web Page for Web Dynpro App by adding the title to the main window of your app.
Go to Windows and open the properties. There will be a field called 'title'. Give the title you want, save, build, DC->Build and deploy.
The title you gave to this Window will be displayed as the title of your Web page.
Regards,
Ajay

How to show specific data for user on redirected page once they logged in

I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
I am not very good with the coding part so if it requires it any help with that would also be helpful.
thank all.

I should be able to get the understanding if explained.
As for scripting i believe its PHP. at lease thats the page i created the login page with.
As for user-specific information: basiclly there account information.
As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
1st table has the following: ID - User Names - Password - account number
2nd table has the following: ID - account number - names - address - ect
So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
Thank you Murry

Is it possible to add the page title to the menu bar?

Does anyone know of any addons that allow you to add the webpage title to the menu bar? I already took a look at the addon Personal Titlebar, which purports to add the menu bar onto the title bar, but had no luck getting it to actually do what it advertised.
I like the way the menu bar looks beside the orange Firefox button, but would also like to be able to see the full page title in the blank space between "Help" and the title bar buttons (min/zoom/close). I don't want to enable the actual full title bar. That would be a waste of space.

That creates a title bar on top of the existing menu bar, which is what I want to avoid. I was hoping someone had created a way to combine the two easily, rather than having them exist as separate bars using double the screen real estate and leaving giant unused areas.
I was hoping for something more like what I mocked up in the included image. The top is with the title bar enabled, the bottom is the preferred result.

Changing page title based on a value

Just curious if it is possible to change the page title based on whether or not an item is null. If it is how?
For example page title:
If PX_ID is not null, the page title is View/Edit PRODUCTS.
and
If PX_ID is null, the page title is Add PRODUCTS.
I know its no big deal... its not that hard to copy the page.
Thanks ,
Derek

Set your page title to something using the &P101_PAGE_ITEM. syntax.
Then you can use whatever logic you need to devise your P101_PAGE_ITEM.
Ben

Page Titles in Web Apps for SEO not possible?

I was surprised to find that you cannot control the page title of a web app item.
For example:
http://tinyurl.com/7qc76gg
The page title is just "Brazil" and there's no way to control it? Ideally we'd want something like this for SEO reason.
Business Name - Destinations - Brazil

You could place the SEO Title in the field "Item Name" and then if you would like a different title for the entry, you can create a custom field.
Carol - BCGurus.com - http://bcgurus.com/Business-Catalyst-Templates for only $7

Problems with French Characters in Page Title

Here is the problem
When using Duplicate Page and trying to set page titles with french characters (or other non standard characters for that matter such as qoutes) The resulting output does not display correctly.
I thought a work around would be to us the HTML escape codes in the title dialog when creating the page however it appears that Incontext then goes and attemps to escape the ampersand part of the escape code during save.
so for instance when trying to set a page title such as Whistler Live! prépare la scène using the following escaped version
Whistler Live! prépare la scène
The resulting HTML saved from incontext looks like this
Whistler Live! pr&eacute;pare la sc&egrave;ne
and the title does not display correctly.
Incontext sees the & which is page of the HTML escape code and they automatically replaces that with &
How the heck can we set HTML Special characters in our page titles - any ideas?

Hi Corey
To answer your questions I am on windows 7 IE 8 and also tried in firefox 3.6
backend is windows 2000 / IIS 6 / Coldfusion 8
I am able to enter the characters in the dialog box but during the save they are altered
I created a basic test page with nothing but the following code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:ice="http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>test</title>
</head>
<body>
<div ice:editable="*" >
<p>Test test</p>
</div>
</div>
<script src="/includes/ice/ice.js" type="text/javascript"></script>
</body>
</html>
saved it as test-characters.cfm (coldfusion page) and tested it out
problem was still there however when I save the page as a .html file and test it out the problem is no longer present
So the problem seems to only occur when using .cfm pages (even if there is no cf code on them)
I am going to send you a private message with access to my test pages in case your inclined to take a look
Thanks for you help so far

Webauth redirection page title

Similar Messages

Maybe you are looking for