Webdynpro ABAP Reporting
Hi All,
Is it possible to create variants in webdynpro abap reporting.If it is possible how to create varitants in webdynpro reporting like normal reports in abap?
Thanks in Advance.
Hi Raji,
In Web dynpro we don't have variants like in traditional dynpro. However there is a new and similar concept called Application Customization:
[http://help.sap.com/saphelp_nw70/helpdata/EN/83/61a042f036c46ae10000000a155106/frameset.htm]
Appreciate if its helpful.
with Regards,
Anita Vizhi Arasi B
Similar Messages
-
Running abap reports in the background when clicked on Webdynpro Button
Hi Experts,
I have requirement where when clicked on a Button in a Webdynpro application, it needs to run an abap reports in the background and I need to pass some parameters to the report.
Is it possible to do that? if yes, please guide me though.
Reward points for useful tips.
Sabbir
Edited by: Sabbir Ahmed on Oct 17, 2008 8:05 AM
Edited by: Armin Reichert on Oct 24, 2008 10:05 AMyou can use rfc's model for this na?
pass the parameters to the RFC and through that RFC run the report,
with regards
shanto aloor. -
ABAP report in Webdynpro iview
Hi All
I have to show output of an ABAP report in a webdynpro iview. The original report output is in list format. How to show this report output in webdynpro iview?
Please help.
Thanks
Raktimalternatively you could do something like below (this is what we do if we need to output in bsp pages)
submit (report_name) and return exporting list to memory.
call function 'LIST_FROM_MEMORY'
tables
listobject = listobject.
call function 'WWW_HTML_FROM_LISTOBJECT'
exporting
report_name = report_name
tables
html = html
listobject = listobject.
html would hold the html version of the list which you can use it.
Regards
Raja -
EHS Report Near Miss Webdynpro abap Enhancement.
HI Experts,
I need to add two fields in SAP EHS Report Near Miss Webdynpro abap application ( standard application ). Let me know how to Enhance the standard EHS Report Near Miss step by step.
Thanks & Regards.
Krishna.Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil -
Hierarchical ALV Report in webdynpro abap
Hi Experts,
I'm facing the trouble with requirement as below. Please help me to resolve this issue.
Output as:
Material Number Description Created Date
- 10001(Header data) abc 09-09-2013
1001 (item level data) abc 10-09-2013
1002 xyz 11-09-2013
1003 xyz 11-09-2013
- 10002(Header data) abc 09-09-2013
2001 (item level data) abc 10-09-2013
2002 xyz 11-09-2013
2003 xyz 11-09-2013
- 10003(Header data) abc 09-09-2013
3001 (item level data) abc 10-09-2013
3002 xyz 11-09-2013
3003 xyz 11-09-2013
.... and so on...
- when I expand on header Materail number, it has to be display with item level data with in alv report in webdynpro abap.
Looking forward your valuable comments.
Regards,
VenkatHi Venkat,
We can achieve the HIERARCHY through the following code.In this case I have used CARRID as the drill down column.
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_flight_tree( ).
if lo_cmp_usage->has_active_component( ) is initial.
lo_cmp_usage->create_component( ).
endif.
DATA lo_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
lo_INTERFACECONTROLLER = wd_this->wd_cpifc_flight_tree( ).
DATA lv_value TYPE ref to cl_salv_wd_config_table.
lv_value = lo_interfacecontroller->get_model(
lv_value->IF_SALV_WD_TABLE_SETTINGS~SET_DISPLAY_TYPE( IF_SALV_WD_C_TABLE_SETTINGS=>DISPLAY_TYPE_HIERARCHY ).
"Enable HIERARCHY structure
data lr_col type ref to CL_SALV_WD_COLUMN.
lr_col = lv_value->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'CARRID' )." Enable HIERARCHY for the col. specified
lr_col->IF_SALV_WD_COLUMN_HIERARCHY~SET_HIERARCHY_COLUMN( ABAP_TRUE ).
Regards,
Harsha -
Generic reporting tool in webdynpro abap
Hi Experts,
Can you please let me know if GRT(generic reporting tool) can be used in Webdynpro ABAP application created using FPM.
Thanks in advance.
SonbiaHello Sonia,
what is the GRT? I've had a search through SCN and cannot find any reference to it - is it a standard SAP product? I would appear to me not to be - and as such I'd guess that there isn't any standard UIBB for it.
If it is a custom solution - then if it is developed in WDA then it should be relatively simple to wrap it in a UIBB layer and embed it into an FPM application.
If it's not developed in WDA, then I'd suggest that the answer is a clear "No".
Do let us know what you mean by GRT - perhaps provide a link to some SAP help about the product?
Thanks,
Chris -
Hi all!
Is there a way to integrate ABAP Reports in Web Dynpro Applications? - apart from changing the ABAP Report in a way like: return a stringtab with all the results of the write statements of a report.
Best regards!
ChristophHi Christoph,
a further possibility of integration is via SAP Enterprise Portal: you create iViews both for the Web Dynpro application and the ABAP report; a loose coupling of the two iViews can be achieved through Object Based Navigation (e.g. to transfer startup parameters from the Web Dynpro iView to the ABAP Report iView).
Patric.
Forgot to add an information link on this: Find a description of WD and OBN in Jochen Gürtler's article
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to use object-based navigation within a web dynpro java application.pdf -
Editing rows and columns in alv reports in webdynpro abap
how edit row and columns in webdynpro abap ?
can i add colors to salv repotrs for below and above range of values how ?
if possible send source code for it.............hi
check out this link for editing the columns of ALV
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b
check out for this thread as well for coloring ALV
Coloring of selected table cells: Ideas wanted
regards,
amit -
Webdynpro ABAP and Light Speed Rendering Engine Performance reports
Hello,
We will be applying the NW EhP1 and ERP EhP4 in November this year.
I am very much excited about the new Lightspeed rendering technology that SAP has delivered with Webdynpro ABAP.
Has anybody installed this already and can you comment about the performance of Webdynpro ABAP AFTER activating this new rendeing engine?
regards,
Atul KulkarniWe have implemented the EHP1 for NW 7.0 and ERP EHP4 back in May 2009. The performance of web dynpro applications is much better with the new rendering engine. The new name is living up to it's character of speed of light.
The usability of the application has increased with the new trade show plus theme. For example pink background for fields with errors. Access Keys and Hot Keys are very useful, specifically if you are migrating legacy applications from systems/languages which rely heavily on access keys. -
Error when Interative Adobe Form is called from Webdynpro ABAP.
Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto -
How to port a ABAP report into ITS? Please help!
Hi Experts,
I have a ABAP report that contains a selection screen with 3 select-option elements and a search button. On pressing search button an ALV grid opens with data from a SAP table based on selection screen criteria.
I want to web enable it so that it can be accessed from Enterprise Portal. i will be using IAC iview in Portal.
Now the IAC iview needs my ABAP report to be ported to ITS?
1.How to port it to ITS? What are the steps?
2.In order to port in to ITS do I need to change my ABAP code?
3.Are there any known limitations of porting ABAP reports in ITS? For example Performance, ALV not supported, Table control not supported etc.
4. Does it handle dynamic programming?
5. Are there any documentation for porting report to ITS?
6. How much time effort it will be for porting ABAP reportys to ITS?
To add some more points. SAP transaction iview is not allowed in my organization. Webdynpro/BSP is also not supported. Thats why I am using IAC iview which needs ITS.
Please help
Thanks
Gopal
Message was edited by: gopalkrishna baligahi,
step1.create a transaction for ABAPreport in SE93.
step2.Go to transaction SICF and create a service in the following path sap/bc/gui/sap/its.
Check the following Url to create a service.
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-its-webgui-application-in-sap-netweaver-04-abap-edition--nsp
step3. create a system object setting the following property categories.
1.Connector
2.Usermanagement
3.ITS
4.WAS
In the usermanagement do the user mapping.
step4. While creating an IAC iview, in the third step for the <b>Internet Application Component (IAC)</b> property give the service name you have created in SICF.
you need not change the abap code. The only limitation while porting abap report in ITS is you cannot view the icons in the tool bar, instead you view the buttons.
ALV is supported. Functionality wise nothing will change except the appearance mainly with the icons.
Regards,
Gopi -
I was gettiing runtime error while executing a Webdynpro-ABAP application
Hi,
I am working on Webdynpro-ABAP and created a ALV report using Service call BAPI method in IDES version. After creating component and designed view and created Webdynpro application. While executing application I am getting some error in explorer.
For any application I am getting same error.
I think some setting in explorer..I am not sure. If yes how can I rectify ?
waiting for quick response.
I am giving details error below what I faced.
Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_00_bapiflight was not called due to an error.
Note
The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20091226 -t: 135942 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Best Regards,
BDPhi
It is the Fully Qualified Domain Name (FQDN) error . Refer SAP online help :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
refer the similar thread :
Problem executing sample Webdynpro application
regards,
amit -
Error in webdynpro(ABAP) application development
Hi,
I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based on webdynpro( ABAP ) .Because when I am trying to create application in se80 and giving the related functional model name in wedynpro component field , I am getting the error like Web Dynpro Comp./Intf. ZOS_xxx_FM does not exist. How to proceed further?
Thanks,
KundanHi,
Can you be more clear...
Please refer this link for Personalization-
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/719f42f2ff7e5fe10000000a155106/content.htm
Regards,
Lekha. -
How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)
Hello
We use SRM Server 5.5 with classic scenario.
We want to call RFC in R/3 from webdynpro ABAP.
How can we do that?
We are developing the web report using webdynpro abap.
So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro. So we call the R/3 RFC to display the PR, PO data.
But I tired to call the RFC in R/3, We could not call it.
How to call the RFC from R/3 to SRM, when we use webdynpro abap?
Thank you,
Best Regards,
SH.Hi
<b>Please look at the following threads as well -></b>
WebDynpro in SRM
BAPI's /RFC's in SRM
BAPI to Change Shopping Cart by RFC
SRM60 and webdynpro
Webdynpro Services Exception
WebDynpro using BAPI has an error
SRM60 and webdynpro...
<b>SAP uses META Function modules in SRM to get data from R/3 back-end.</b>
<u>For getting Purchase requistion data, use the function modules -></u>
META_REQUISITION_CHANGE Change purchase requisition
META_REQUISITION_CREATE Create Requisition
META_REQUISITION_DELETE Delete/close purchase requisition
META_REQUISITION_GETDETAIL Display requisition details
META_REQUISITION_GETITEMS Display requisition items
META_REQUISITION_GETRELINFO Get Releasease Info for requisitions
<u>For getting Purchase order data, use the function modules -></u>
META_PO_CREATE Create purchase order
META_PO_DELETE Delete reservation
META_PO_GETDETAIL Display purchase order details
META_PO_GETITEMS Display purchase order items
META_PO_GETRELINFO Display purchase order release information
Hope this will definitely help. Do let me know.
Regards
- Atul -
How to read RRI sent parameters in ABAP Report??(Urgent)
I have my own ABAP report. How can I read parameter that RRI sent to me from BEX Query? I know it's possibly needed to setup table name in RSBBS for each element.
hi,
i am failing to see relevance of this post in WebDynpro for ABAP forum. Requesting moderator to move to ABAP general forum.
Maybe you are looking for
-
Maintain Multi-Lingual Tables Option Fails On Cznlins.Sql
Hi all. I am trying to install Albanian language in a 11.5.10.2 fresh installation. I applyed all the neccesary patches to come to the NLS apply patch stage. I followed the link https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_
-
DMX Query, the most influential variable
Yours sincerely. I'm doing work of data mining using decision trees, and I have the expected result: Predicted probability of dropping out, however I would like the result, by DMX query, throw me the most influential variable in the above probability
-
Freehand Postscript Fonts 10.5.8
Hello, For the last couple of months when I print to my ImageSetter some text items for example Quotation marks, accents etc would not print and the only available solution is to outline everything. What is baffling to me is that the page would print
-
I have a new 7th gen iPod, I have up loaded the latest iTunes version, I go to the music tab to sync, I click sync and the ipod starts to sync, but it does not sync all the music. It indicates all the songs on the screen, but not on the ipod
-
Unable to delete the key figure
Hi I have created a Z key fig. and assigned it to INFOCUBE. Now i want to delete the key fig. how can i do that. If I can delete how can i change the data type. Thanks in advance. Pankaj Angra