WebDynpro border

Dear experts,
I'am working with the web dynpro explorer for abap
and when I start the application and the internet-explorer apears
all applications have a 10 or 15px margin at the top and
left.
Is it possible to deactivate or edit this margin?
best regards,
H. Pollmann

Hi,
I came across this wiki, which is very generalized which could solve your problem.
Just check it out.
https://wiki.sdn.sap.com/wiki/x/wCM
Cheers,
Kumar

Similar Messages

How to set Border Color for Screens in WebDynpro?

Hi friends,
I was actually working on an application involving many screen Layouts.
After the designing of these Screens i have observed that on all the four borders of the screen are left with white as the background.So i just wanted to know whether we can select the choice of Border of the screen.
Please do let me know about this problem.
Thanks and regards,
Chandrashekar.

Hi,
in case your deploying in a portal the WDJ might sport the Portal theme else you'll have to take at look at editing Web Dynpro Themes.
See <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/how%20to%20edit%20web%20dynpro%20themes.pdf">How to edit Web Dynpro Themes</a>.
regards,
Bernd

Reading POST-Request-Parameter-Values from WebDynPro now possible?

Hello,
in the past I always was disappointed that in WebDynPro there was no way to read POST-request-parameter-values directly after the call of a WebDynPro-Application.
The only (documented) way to read / transfer request-data into an WebDynPro-application was via "URL query string parameters" in the request URL.
The last week I forgot this restriction. I called my WebDynPro-application using a POST-Request-Parameter (cookie_guid) instead of an URL-parameter.
After noticing my mistake, I was really surprised that the WebDynPro could read / shows the the POST-Request-Value.
I didn't make any changes in the coding of my WebDynPro-Application (zvis_show_sso_cookie).
After this cognition I built the following simple HTML-formular to analyse the behavior of the WebyDynPro by calling it with an URL-Parameter (cookie_guid=Url-GUID) together with the POST-Parameter (cookie_guid = Post-Value-GUID).
After calling the WebyDynPro it reads / shows the "POST-Value" of the request !!!
(Remark: If I made a simple refresh or type directly the URL "http://hg10762.vis-extranet.de:1080/sap/bc/webdynpro/sap/zvis_show_sso_cookie?sap-language=DE&cookie_guid=Url-GUID" in the browser, the same webdynpro reads / shows the URL-Parameter-Value).
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
       "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
</head>
<body>
<form method="post" action="http://hg10762.vis-extranet.de:1080/sap/bc/webdynpro/sap/zvis_show_sso_cookie?sap-language=DE&cookie_guid=Url-GUID">
<table border="0" cellpadding="5" cellspacing="0" bgcolor="#E0E0E0">
    <tr>
      <td align="right">Cookie_GUID:</td>
      <td><input name="cookie_guid" type="text" size="30" maxlength="30" value="Post-Value-GUID"></td>
    </tr>
    <tr>
      <td>
        <input type="submit" value=" Absenden ">
        <input type="reset" value=" Abbrechen">
      </td>
    </tr>
</table>
</form>
</body>
</html>
My questions:
I there any documentation that describes the behavior of WebDynPro after calling it by using POST-Parameter values?
I believe in the past it wasn't possible to read POST-request-parameter-values in WD. Has SAP changed the functionality?
Is the behavior I described in my example above mandatory?
Regards
Steffen

As far as i know in general HTTP request GET method is standard but in SAP POST is standard. All the client request is passed as POST to the server in order to avoid the URL parameter length restriction in GET method.

UI element in Webdynpro to align the content area at the center of the page

Hi Experts,
I am looking for a UI element in webdynpro which can keep the entire content area aligned to the center of the page as well as can provide the borders along the content area.
Please suggest if there exists any such UI element in webdynpro.
P.S. We are using NWDS Version: 7.01.00
Thanks in advance for the replies.
Regards,
Anurag

Hi Anurag,
What you can try is to put all of your UI elements in Group and then do the alignment. Set the visibility property of the group header to invisible. This will give you a border.
Hope this solves your problem.
Regards
Abhinav Sharma

Dynamic table in Webdynpro Java

Hi Colleagues,
I need to develop a table dynamically in webdynpro(Java), the table should not contain scrollbar, header, lines and border...Actual requirement is to group 12 elements in the from of a table
could anyone please help me here?
Thanks & Regards
Swetha

Hi Armin,
In a window i have to develop a part of window which looks like this
Image             URL                      Description
Image             URL                      Description
Image             URL                      Description
Image             URL                      Description
I have tried doing this using Flow layout for each line
But when i follwed that the last column "description" is not alligned in a straight line(for all rows)
structure is not even as shown above
(varying depending upon the length of the URL)
Here i have attached the piece of code i used
IWDTransparentContainer MainContainer1 = (IWDTransparentContainer)view.createElement(IWDTransparentContainer.class);
       IWDFlowLayout flowlayout1 = (IWDFlowLayout)MainContainer1.createLayout(IWDFlowLayout.class);
////For adding Image
       IWDImage image = (IWDImage)view.createElement(IWDImage.class);
       image.createLayoutData(IWDFlowData.class);
       image.setSource("~sapicons/s_b_alet.gif");
/////for Adding URL
       IWDLinkToAction link1 = (IWDLinkToAction)view.createElement(IWDLinkToAction.class);
       IWDTextAccessor link1text = wdComponentAPI.getTextAccessor();
       link1.setText("Collaboration Window");
       IWDAction Action1 = (IWDAction)view.getAction("Openlink");
       link1.setOnAction(Action1);
       IWDFlowData linkdata1 = link1.createLayoutData(IWDFlowData.class);
       WDLayoutCellDesign rightpad = WDLayoutCellDesign.R_PAD;
       WDLayoutCellSeparator seperator = WDLayoutCellSeparator.LARGE;
       linkdata1.setCellDesign(rightpad);
       linkdata1.setVGutter(seperator);
///for adding description
       IWDTextView text1 = (IWDTextView)view.createElement(IWDTextView.class);
       text1.setText("Testing");
       IWDFlowData textdata1 = text1.createLayoutData(IWDFlowData.class);
       textdata1.setCellDesign(rightpad);
       textdata1.setVGutter(seperator);
       MainContainer1.addChild(image);
       MainContainer1.addChild(link1);
       MainContainer1.addChild(text1);
       IWDGridData maincont1 = MainContainer1.createLayoutData(IWDGridData.class);
       maincont1.setPaddingLeft("10px");
       maincont1.setPaddingTop("20px");
I found that this static way of adding rows is not the right way( Keeping in mind the future enhancements)
So thought of trying it through table
i have used IWDtable ...but the look does'nt meets the requirement at all(it has header....border..scrollbar..rows and colums are seperated by lines---> which are not needed)
Could you please let me know is there a approach to do this?
Thanks & Regards
Swetha
Edited by: Swetha Nellore on Feb 18, 2009 12:32 PM
Edited by: Swetha Nellore on Feb 18, 2009 12:33 PM
Edited by: Swetha Nellore on Feb 18, 2009 12:34 PM

Webdynpro + Adobe Interactive Form + Web Service

Hello Experts,
Can you please provide me the useful solutions for the below mentioned issues.
I created a Webdynpro with one view .Kept the adobe interactive form on the view by binding the structure with all my fields to the data source. And one webservice is linked to this form by keeping one submit button on the form. Iam sending the entire data filled on the form to the webservice as importing structure which is binded to the DATA SOURCE of the View in the Webdynpro. Now my questions are,
1.Among these fields,i have a list box (can select multiple values from the list). Iam pasing the values to this list box from the Webdynpro with out changing the TYPE of field in the structure. But all the selected values of list box should be available in the web service. how is it possile?. The importing structure contains the TYPE of that field as a data element and not a TABLE TYPE.
2. How to make the borders of the field in red color in run time. (like it comes for mandatory fields initially).
Thanks in advance.
Regards,
Ram.

Hi,
But now, my doubt is "How to know the list of values selected in the list box to concatenate using scripting in th Adobe form it self? "
For list box which is multiselect, when you say this.rawValue you get a arraylist, i believe separated by "\n" which mean newline on the form and separated by # when it reaches to SAP.
And also, regarding border color. The suggested logic is not changing the color of the border of the field. Instead it is giving additional border in specified color. But, Is it not possible to change the actual border color instead of adding additional borders with other color
You feel like aditional border because the field is an input type which has emboss effect to look, you can change the appearance of the file from palletes/windos>object>field-->appearance dropdown, just say it to none and alter the type field in Value tab from user entered optional to readonly you will see the difference.
Let me know if this suffice you.
Cheers,
Sai

How to color the mandatory fields in a Adobe WebDynpro Java form

Hi Experts,
How to color the mandatory fields in a Adobe WebDynpro Java form?
This will avoid any confusion to he end user while filling the form as he would try to type something in field which is set as Read nlybut stil the cursor appears there.
Regards,
Shobhit

Hi Shobhit,
you can write something like xfa.host.setFocus(<text field name>). to set the focus or
<text field name>.fillColor = "120,120,123";
<text field name>.resolveNode"ui.#textEdit").border.edge.fill.color.value="120,150.200";
to fill the color.
Refer to adobe dev centger scripting samples to learn more on these.
Hope these helps.
Thanks and Regards,
- anto.

Progress indicator in webdynpro

we have a requirement to display a progress indicator when large data is being loading on to a webdynpro view.Can some body please help with any FM or any logic to display a progress indicator.

Hi,
Can anyone please tell me the way to upload file from client system to server.
The code i have is as follows:-
Jsp:-
function saveImage(){
     //projectname.javafilename
     var strStatus = "save";
     document.saveImageForm.action="/irj/servlet/prt/portal/prtroot/TestXML.TextImageLink?frmstatus="+ strStatus;
     document.saveImageForm.method="post";
     document.saveImageForm.submit();
<form name="saveImageForm" encrypt="multipart/form-data">
<table width="388" cellpadding="1" cellspacing="1" bgcolor="#F0F0F0" border='0'>
     <tr>
             <td><font color="blue" face="verdana" size="2">IMAGE:</font></td><td><input id="image" type="file" name="image" value=""/></td>
     </tr>
<tr>
     <td><input type="submit" name="submit" value="Submit" onclick="saveImage();"/></td>
     </tr>
</table>
</form>
now i am not getting what to write in java file
using IPortalComponentRequest.
Using the jsp file upload in tomcat is working but here it is not working
please help meee
Thanks in Advance
Regards
Sirisha

Webdynpro iview in HTML iframe

Hello,
I'm trying to put a portal webdynpro iview in a html iframe,
and when I do it the screen just repeatedly refreshes and never loads,
but when I try the normal webdypro dispatcher address on the iframe it
works just fine. The problem with it is that I can not do any portal eventing
that way.
Any suggestions?
Thanks in advance for any answers,
Udi.

Hi,
Hmm, we are trying to access the application from a regular html file, using either the direct link to the iView/application or the quick link.
For example:
<HTML>
<HEAD>
</HEAD>
<FRAMESET FRAMEBORDER=0 BORDER=0 ROWS= 200,50 >
<FRAME FRAMEBORDER=0 NORESIZE NAME="Blabla"
src="https://<server>.../irj/servlet/prt/portal/prtroot/pcd!3aportal_content!....">
</FRAMESET>
</HTML>
Brgds, Caroline

Logical Database in Webdynpro

Hello,
I have a program in R/3 that is based on a logical database. I don't want to have to write the program all over again in Webdynpro.
Is there a way to use the logical database in Webdynpro for ABAP.

Basically WDA calls a FM and then the following help is a good starting point:
"Calling a Logical Database Using a Function Module"
http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
Kindly close the thread and award appropriate a points to the answer given.
Sergio

Filename in Webdynpro for a PDF created with Smartform

Hi,
I created a PDF with Smartform in my Webdynpro-Application.
When I click the save button there is a default filename f.pdf .
How can I change the filename?
Regards
Marcus Schug

Hi Experts,
any update on this?
I am facing the same problem with ESS payslip (smartform/Hrform): my customer wants to have custom file name for download salery statements from the portal. Do you know how to change the default form name unknown.pdf to e.g.. "payslip_month_year"?
I spent a lot of time to find any possibility to get and change the file name but without success till now.
Please respond.
Regards,
Zdzislaw Kaczmarczyk
Edited by: Zdzislaw Kaczmarczyk on Jun 14, 2010 4:41 PM

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Cell border selection problem

I have a spreadsheet that is a week at a glance schedule for a dance school. There are three columns per day, each representing a different studio location. Each row represents a 15 minute block time. I have been trying to create a border for each class (class times vary from 45 minutes to 2 hours) while leaving the in-between lines blank. For each 45 minute class, I select the three cells in a column, scroll down the border selection tool and select the outside border icon, next select the type of line, then the weight, finally the color, and so on. Once I get about 50% done working my way across the spreadsheet, buggy things start to happen. For example, a horizontal line will extend across several columns, sometimes intersecting previously defined class blocks. If I try removing the errand lines, then all the frames that do require a border at that position get their border errased. I them have to go back to those cells to re-assign a border segment, but then the unwanted horizontal line will reappear in the blank cells again. Very frustrating. Also, in my opinion, there are some cell frame options that are missing in this program. I t would be nice to have a button to select the top and bottom of a frame or group of frames at the same time. At present, you have to first select the top border, format it, then the bottom border and format it. Same goes for left and tight border sections. You can't select the two outside edges to apply the same style/thickness/color. Excel's border formatting commands are much better in this regard.
Title was edited by: Host

Hi Jim,
I played around with the border options today and although I didn't have the borders going where they were not wanted I understand your frustration having to set either all four or just one border at a time.
Just as an option, would filling the sets of cells with a light colour for each class work better for you?

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

Hiding a subview called in a main view in WEBDYNPRO Application

Hello Experts,
I have a scenario in which i am calling a subview inside a main view. I have created a main view in which:-
1. List of reportee to the manager logged in is getting displayed in the form of a table.
2. When we select any row of this table ( means selection of any reportee row) and click on a button 'Get Details', then it should display the detailed personal data of that reportee.
I have successfully called an already created personal data view inside this main view to display the detailed personal data of any selected reportee. But the issue is in the main view:-
1. This view has table containing the list of reportee getting displayed.
2. This view simultaneously also displays the default first row detailed data of the table of reportee.
Our requirement is:-
1. To display only table containing the list of reportee in the first load of main view.
2. Then when any row of this table is selected, then only the detailed data specific to that row should be displayed.
My approach till now is:-
1. I have removed the default first row lead selection for the table of reportee.
2. I have created a node VISIBILITY_DET_DATA and then an attribute IS_VISI BLE under that node of type WDUI_VISIBILITY.
3. In the layout section i have created a group GROUP_DETAIL_DATA and a view container UI element under that to call the detailed data view when any row of table containing the list of reportee is selected.
4. I have created a binding for the VISIBLE property of the group GROUP_DETAIL_DATA to the attribute IS_VISI BLE created in the context of the component contoller.
5. I have then used the method WDDOINIT of the main view to write code to hide the detailed data view by setting the IS_VISIBLE flag to '02' i.e. NONE.
But this is causing the entire view to be coming as blank view.
I am not sure why this is happening, Can any of you suggest if i am missing anything important which is cauing this analomy.
Rupesh

Hi ,
This is a Webdynpro related question. you would have got many repsonses if you posted in webdynpro forum.
i) I would want to know how to hide Image object or the transparent container which holds the IMAGE object, dynamically through the code inside the MODIFYVIEW method of the view
You can do a post_exit enhancement in the MODIFYVIEW method. Get the UI element object from view and There are methods to set the visibility at runtime.
Is there an option to dynamically specify diffent image based on the login language with the IMage container?
i think yes, same procedure as first question's answer. Based on condition you can change the source path of the mime object .

WebDynpro border

Similar Messages

Maybe you are looking for