Weblogic 10.3.2.0 installation does not pick the right JDK

The installation does not pick up the right jdk version that is jdk 11.6.0_11 . Although the machine is running the same. Instead it picks up jdk 1.6.0_14. have tested the machine many times. I am Installing Oracle SOA Suite 11g.

Inside "startWebLogic.sh" file add the JAVA_HOME like following (just below the "setDomainEnv.sh" call):
JAVA_HOME=C:\bea103\jdk1.6.0_17
See if this helps.
Thanks

Similar Messages

SSIS ETL does not pick the file from Share point when it execute through SQL Agent job

I have created one SSIS packages, which pick the file from the Share point document library. its work successfully, once it execute through the VS project application.
But when i create a job in SQL Server Agent for this package then it does not pick the file and job getting fail.
Just for more update, SQL Server has been install in Cluster mode and using BIDS 2012 with SQl Server 2012.

Hi PriyankGupta,
SQL Server Integration Services is not cluster awareness, and does not support failover from one cluster node to another. So, in your clustered environment, make sure SSIS is installed on each node in the cluster. In other word, SSIS must be installed on
the server where the SQL Server Agent job is created.
If you use any third party task/component or drivers, make sure they are installed on the SQL Server Agent job server. Besides, also pay attention to the protection level of the package as well as 32-bit or 64-bit runtime mode of the package. For more information,
please see:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job
If the issue persists, please post the error message in the job history for further analysis.
Regards,
Mike Yin
TechNet Community Support

JSP does not call the right method in controller class

Hi all,
I have a jsp file which loads a page at this address: http://localhost:8080/dir/list/
I've added two checkboxes to the page; user can check both checkboxes, only one or none. Following is code I have in jsp file:
<form class="checkboxForm">
<c:choose>
<c:when test='${newItems==true}'>
<input id="newItems" type="checkbox" value="#" name="newItems" class="checkbox2" checked="checked" /><strong> New Businesses   </strong>
</c:when>
<c:otherwise>
<input id="newItems" type="checkbox" value="#" name="newItems" class="checkbox2"/><strong> New Businesses   </strong>
</c:otherwise>
</c:choose>
<c:choose>
<c:when test='${rejectedItems==true}'>
<input id="rejectedItems" type="checkbox" value="#" name="rejectedItems" class="checkbox3" checked="checked"/><strong> Rejected Businesses   </strong>
</c:when>
<c:otherwise>
<input id="rejectedItems" type="checkbox" value="#" name="rejectedItems" class="checkbox3"/><strong> Rejected Businesses   </strong>
</c:otherwise>
</c:choose>
<a href="#" onclick="apply();">
<button name="apply" class="btn-primary" value="Apply" tabindex="4">Apply</button>
</a>
</form>
<script type="text/javascript">
function apply(){
     var newItems = document.getElementById("newItems").checked;
     var rejectedItems = document.getElementById("rejectedItems").checked;
     alert("Inside apply() method.");
     alert("newItems= " + newItems + ", rejectedItems: " + rejectedItems);
     window.location = "<c:url value='/list/'/>" + newItems + "/" + rejectedItems;
     alert("window.location= " + window.location);
     alert("Add extra delay!");
     return false;
</script>This is my Controller class:
// Method1: this method gets called when the user loads the page for the first time.
@RequestMapping(value="/list", method = RequestMethod.GET)
public String list(Model model, HttpServletRequest request) {
          System.out.println("Controller: method1: Passing through...");
          model.addAttribute("newItems", Boolean.TRUE);
          model.addAttribute("rejectedItems", Boolean.TRUE);
          // Does other things.
// Method3: this method gets called when user checks/unchecks one of the checkboxes and clicks on Apply button.
@RequestMapping(value="/list/{newItems}/{rejectedItems}", method = RequestMethod.GET)
public String list(@PathVariable Boolean newItems, @PathVariable Boolean rejectedItems, Model model, HttpServletRequest request) {
          System.out.println("Controller: method3: Passing through...");
          model.addAttribute("newItems", newItems);
          model.addAttribute("rejectedItems", rejectedItems);
// Does other things.
     }The way my jsp code is written now, it calls the correct method and displays the correct url. When page loads for the first time, it calls method1 and the url is:
http://localhost:8080/dir/list
When the user checks/unchecks one or both checkboxes and clicks on apply button, method3 is called and this url is displayed:
If both checkboxes are checked which both booleans are set to true:
http://localhost:8080/dir/list/true/true
Everything is fine... however, if I comment these two lines at the end of JavaScript apply() function,
alert("window.location= " + window.location);
alert("Add extra delay!");Then method3 will never gets called; only method1 gets called and I see this url:
http://localhost:8080/url/list//?newItems=%23&rejectedItems=%23&apply=Apply
I do not know why it gets confused bet. method1 and method3 and cannot pick the right method?
I tried to use the POST method instead, but the page goes directly to our internal error page and it never reaches the method I wrote in my controller for POST:
I don't really know what I'm doing wrong? Any help is greatly appraciated.
Edited by: ronitt on Dec 13, 2011 2:35 PM

I changed the <form> in the jsp to div and its working fine. I do not need to have comments in JavaScript funcion() anymore. I don't know why that made the difference though? According to:
http://www.w3schools.com/tags/tag_form.asp
The <form> tag is used to create an HTML form for user input.
The <form> element can contain one or more of the following form elements:
<input>
<textarea>
<button>
<select>
<option>
<optgroup>
<fieldset>
<label>
An HTML form is used to pass data to a server.
I do have <button> and also send the data - the value of checkboxes - to server. So I think it should also work with <form>.
Please let me know if you have any idea. Thanks.

SCOM 2012 Installation does not show the SQL Server Instance for reporting services

I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
Regards,
Paul Mendoza.

Hi Paul
Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
- run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
- run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together.
Cheers
Graham
New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Reader 9.2 does not choose the right postscript level

Hi,
I use an old HP4500 Color Laser Jet (it still prints very well and I have a lot of toner :-)). every time I want to print a pdf on it, it does not work, for the adobe reader sets the postscript level to 3 although the printer has only 2.
I've found the information anywhere in the adobe pages, which say:
"Note: Acrobat sets the PostScript level automatically, based on the selected printer."
In my printer settings (Win7-64 bit, driver: HP Universal Printing PS Version 12.4.2009, 61.94.3.37) I have set the level to 2 (Dokumentoptions:Postscript Options:Postscript language level: 2)
But Adobe Reader is not interested in my settings and sets it to 3 every time and I have to change it manually every time. That is not funny, when printing many pdfs.... :-(((
I don't understand this, it has happend with another driver under windows xp the same way, but now I have lost my patience.
Why does the reader does not work properly or can I tell him to do so ?
Best regards
Thomas keller, Germany

Thanks Bernd! Works just fine now. Am I that obtuse that I wasn't able to
figure this out on my own?

CBO not picking the right execution plan

Database: Oracle 9.2.0.6 EE
OS:Solaris 9
I am trying to tune a query that is generated via Siebel Analytics. I am seeing a behaviour which is puzzling me but hopefully would be 'elementary' for someone like JPL.
The query is based on a total of 7 tables. If I comment out any 2 dimension tables, the query picks up the right index on the fact table. However, the moment I add another table to the query, the plan goes awry.
The query with 5 tables is as below:
select count(distinct decode( T30256.HEADER_FLG , 'N' , T30256.ROW_WID ) ) as c1,
T352305.DAY_DT as c2,
case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end as c3,
T352305.ROW_WID as c5
from
               W_PRODUCT_D T30955,
               W_PRDATTRNM_D T44643,
               W_DAY_D T352305,
               W_ORDERITEM_F T30256,
               W_PRDATTR_D T40081
where ( T30955.ROW_WID = T44643.ROW_WID
and T30256.LAST_UPD_DT_WID = T352305.ROW_WID
and T30256.PROD_ATTRIB_WID = T40081.ROW_WID
and T30256.PROD_WID = T30955.ROW_WID
and T30955.PROD_NAME = 'Mobile Subscription'
and (case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end in ('BT150BB-18M', 'BT250BB-18M', 'BT50BB-18M', 'BT600BB-18M'))
and T352305.DAY_DT between TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 7 and TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 1
group by
T352305.ROW_WID, T352305.DAY_DT,
case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end
;And the execution plan is as below:
| Id | Operation                        | Name                | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT                 |                      |   269 | 25824 | 18660   (3)|
|   1 | SORT GROUP BY                   |                      |   269 | 25824 | 18660   (3)|
|   2 |   NESTED LOOPS                   |                      |   269 | 25824 | 18658   (3)|
|   3 |    NESTED LOOPS                  |                      | 6826 |   579K| 4734   (3)|
|   4 |     MERGE JOIN CARTESIAN         |                      |     8 |   544 |     6 (17)|
|   5 |      NESTED LOOPS                |                      |     1 |    54 |     4 (25)|
|   6 |       TABLE ACCESS BY INDEX ROWID| W_PRODUCT_D          |     1 |    37 |     3 (34)|
|* 7 |        INDEX RANGE SCAN          | W_PRODUCT_D_M2       |     1 |       |     2 (50)|
|   8 |       TABLE ACCESS BY INDEX ROWID| W_PRDATTRNM_D        |     1 |    17 |     2 (50)|
|* 9 |        INDEX UNIQUE SCAN         | W_PRDATTRNM_D_P1     |     1 |       |            |
| 10 |      BUFFER SORT                 |                      |     8 |   112 |     4   (0)|
| 11 |       TABLE ACCESS BY INDEX ROWID| W_DAY_D              |     8 |   112 |     3 (34)|
|* 12 |        INDEX RANGE SCAN          | W_DAY_D_M39          |     8 |       |     2 (50)|
| 13 |     TABLE ACCESS BY INDEX ROWID | W_ORDERITEM_F        |   849 | 16131 |   592   (3)|
|* 14 |      INDEX RANGE SCAN            | W_ORDERITEM_F_INDX9 |   852 |       |     4 (25)|
|* 15 |    INDEX RANGE SCAN              | W_PRDATTR_D_M29_T1   |     1 |     9 |     3 (34)|
----------------------------------------------------------------------------------------------Note how the dimension tables W_PRODUCT_D & W_DAY_D are joined using cartesian join before joining to the fact table W_ORDERITEM_F using the composite index 'W_ORDERITEM_F_INDX9'. This index consists of LAST_UPD_DT_WID, PROD_WID and ACTION_TYPE_WID, which are foreign keys to the dimension tables.
Now if I add one more table to the query:
select count(distinct decode( T30256.HEADER_FLG , 'N' , T30256.ROW_WID ) ) as c1,
              T352305.DAY_DT as c2,
               case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end as c3,
               T30371.X_BT_DLR_GROUP as c4,
               T352305.ROW_WID as c5
          from                W_PRODUCT_D T30955,
               W_PRDATTRNM_D T44643,
               W_DAY_D T352305,
               W_ORDERITEM_F T30256,
               W_ORDER_D T30371,
               W_PRDATTR_D T40081
          where ( T30955.ROW_WID = T44643.ROW_WID
          and T30256.LAST_UPD_DT_WID = T352305.ROW_WID
          and T30256.PROD_ATTRIB_WID = T40081.ROW_WID
          and T30256.PROD_WID = T30955.ROW_WID
          and T30256.ORDER_WID = T30371.ROW_WID
          and T30955.PROD_NAME = 'Mobile Subscription'
          and T30371.STATUS_CD = 'Complete'
          and T30371.ORDER_TYPE = 'Sales Order'
          and (case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end in ('BT150BB-18M', 'BT250BB-18M', 'BT50BB-18M', 'BT600BB-18M'))
          and T352305.DAY_DT between TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 7 and TO_DATE('2008-09-27' , 'YYYY-MM-DD') - 1
          group by T30371.X_BT_DLR_GROUP, T352305.ROW_WID, T352305.DAY_DT,
          case when T44643.PRODUCT_CLASS_NAME = 'MobileSubscription' then T40081.ATTR15_CHAR_VAL else 'Unspecified' end;I have added a single table W_ORDER_D to the query, and the execution plan is:
| Id | Operation                          | Name               | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT                   |                     |    44 | 6336 | 78695   (3)|
|   1 | SORT GROUP BY                     |                     |    44 | 6336 | 78695   (3)|
|   2 |   NESTED LOOPS                     |                     |    44 | 6336 | 78694   (3)|
|   3 |    NESTED LOOPS                    |                     |   269 | 27707 | 78145   (3)|
|* 4 |     HASH JOIN                      |                     | 6826 |   626K| 64221   (3)|
|   5 |      TABLE ACCESS BY INDEX ROWID   | W_DAY_D             |     8 |   112 |     4 (25)|
|* 6 |       INDEX RANGE SCAN             | W_DAY_D_M39         |     1 |       |     3 (34)|
|   7 |      TABLE ACCESS BY INDEX ROWID   | W_ORDERITEM_F       | 86886 | 2206K| 64197   (3)|
|   8 |       NESTED LOOPS                 |                     | 87004 | 6797K| 64200   (3)|
|   9 |        NESTED LOOPS                |                     |     1 |    54 |     4 (25)|
| 10 |         TABLE ACCESS BY INDEX ROWID| W_PRODUCT_D         |     1 |    37 |     3 (34)|
|* 11 |          INDEX RANGE SCAN          | W_PRODUCT_D_M2      |     1 |       |     2 (50)|
| 12 |         TABLE ACCESS BY INDEX ROWID| W_PRDATTRNM_D       |     1 |    17 |     2 (50)|
|* 13 |          INDEX UNIQUE SCAN         | W_PRDATTRNM_D_P1    |     1 |       |            |
|* 14 |        INDEX RANGE SCAN            | W_ORDERITEM_F_N6    | 86886 |       |   212 (18)|
|* 15 |     INDEX RANGE SCAN               | W_PRDATTR_D_M29_T1 |     1 |     9 |     3 (34)|
|* 16 |    INDEX RANGE SCAN                | W_ORDER_D_N6        |     1 |    41 |     3 (34)|
-----------------------------------------------------------------------------------------------Now CBO doesn't choose the composite index and the cost also has increased to 78695. But if I simply add an /*+ORDERED*/ hint to the above query, so that it should join the dimension tables before joining to fact table, then the cost drops to 20913. This means that CBO is not choosing the plan with the lowest cost. I tried increasing the optimizer_max_permutations to 80000, setting session level optimizer_dynamic_sampling to 8 (just to see if it works), but no success.
Could you please advise how to overcome this problem?
Many thanks.

joshic wrote:
Database: Oracle 9.2.0.6 EE
OS:Solaris 9
I am trying to tune a query that is generated via Siebel Analytics. I am seeing a behaviour which is puzzling me but hopefully would be 'elementary' for someone like JPL.
The query is based on a total of 7 tables. If I comment out any 2 dimension tables, the query picks up the right index on the fact table. However, the moment I add another table to the query, the plan goes awry.
I have added a single table W_ORDER_D to the query, and the execution plan is:
Now CBO doesn't choose the composite index and the cost also has increased to 78695. But if I simply add an /*+ORDERED*/ hint to the above query, so that it should join the dimension tables before joining to fact table, then the cost drops to 20913. This means that CBO is not choosing the plan with the lowest cost. I tried increasing the optimizer_max_permutations to 80000, setting session level optimizer_dynamic_sampling to 8 (just to see if it works), but no success.Back to the original question:
* Can you force the index usage of the composite index on W_ORDERITEM_F in the second query using an INDEX hint (instead of the ORDERED hint)? If yes, what does the plan look like, particularly what cost is reported?
* Could you post the plans including the "Predicate Information" section below the plan output?
* What is the definition of the index W_ORDERITEM_F_N6 on W_ORDERITEM_F?
* Are the cardinalities reported in the execution plans close to reality or way off? The best way to verify this would be to run your query with SQL tracing enabled and generate a tkprof output. If you do so please post the tkprof output here as well.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

JRMC4.0: Method profiler not picking the right class instance

Testing with JRMC 4.0 + R28 1.6
Method profiler works on unit-test cases. However, when using it on a large scale application, it did not work properly for some of the classes and methods (zero invocation count).
I searched internet and saw some ppl mentioning about multiple class loader could result that weird behavior. I only using one simple spring class loader, therefore don't know how to resolve it...
Any suggestion would be appreciated...

Thanks Erik. The issue is resolved without me doing anything on the application side... I switched back to JRMC 3.1.2, and it works fine.
Not sure if it's worth looking into to see what's new in 4.0?

I have a 64 bit system running Win 7, but the installation does not recognise the 64 bit download as suitable for 64 bit system.

I am trying to install Itunes on my new Laptop and it is a 64 bit system. I have downloaded the 64 bit Itunes and when I try to install it, the error is that the program is not suitable for 64 bit system.
The same happens for 32 bit download of Itunes.

I have this problem also. I have not had trouble installing any previous version of iTunes. I am mystified why now it is a problem.
Here is the error I get:

Content generation error - version string does not have the right format

This is when trying to import an HTML article into an existing .folio. It's as basic an HTML page as I can make and it still be worthwhile (just divs & css). There's no spaces etc in any of my file names.
This is the first time I've tried to import an HTML article.
DPS details: version 12.2.4.20120611_m_691037
8.0.7.21
Windows 7
Thanks in advance for any assistance.
Simon.

I have now encountered the same issue and fail to resolve it.
After having tried every possible combination of folder structures (assets in local subdirectory, same root and moving everything into HTMLResources), trying various flavours of html (5, 4s, 4t) and turning my nose 90 degrees east while pressing "import"... the error persists.
I am pretty sure that this has absolutely nothing to do with the content or structure of my HTML article. Heck, even a completely vanilla HTML file (valid of course) with a single line of text in the body and no styles, assets whatsoever: fails.
It does work when importing it to a completely new folio though.
Can someone please confirm that she/he is still able to import HTML articles to preexisting folio, after the latest folio builder panel update?

SetCurrentRow does not set the right class on the new row selected

This has to do with using setCurrentRow and having
spry:select used on the active row to enable selection
highlighting.
When setting the current row programmatically by invoking
setCurrentRow, the row get seccessfully set, but the class is not
set to reflect that current row
Any idea why the class of the selected row is not changing
when I am calling setCurrentRow (works great when there is a mouse
click)?

Hi,
The spry:select is a shortcut attribute that only works
onclick.
Check out:
http://labs.adobe.com/technologies/spry/samples/data_region/SetCurrentRowByValueSample.htm l
and
http://labs.adobe.com/technologies/spry/samples/data_region/SetCurrentRowSample.html
Thanks,
Don

Selected value in LOV does not update the right item in multirecord block

Hello,
I am working on a form which is a multi-record form => 3 records. Each record has several items. The last item in these records is a LOV button which is part of the lov_item.
Let me draw this situation:
record 1 || item1 || item2 || item3 || lov_item || lov button
record 2 || item1 || item2 || item3 || lov_item || lov button
record 3 || item1 || item2 || item3 || lov_item || lov button
This is the problem: my cursor is located on the third record. Right now, I am pressing the lov button on the first record. After selecting a value in the lov, Forms returns this value in the lov_item on the third record. This is not what I want. I would like to see the returned value in the lov_item on the first record.
How can I establish this?
We are using Oracle Designer 2.1 with Oracle Forms 5.0.6.16.0
Best regards,
Ronny

Kevin,
I tried your solution but this seems not workable. The cursor is still located in the record where it was.
I also tried to use a message in the W-B-P trigger:
message('record '||:system.mouse_record); to return the record number. It is always returning 0 as value. No mather what I try.

I have tried to display a hd video downloaded from the store on my Samsung hd tv. Message on MacBook pro retina says that display does not support the right type of drm. What's going on here?

Cannot display hd video from MacBook pro via hdmi on my Samsung hg tv. Says wrong type of protection for drm or words to that effect. This is a big pain

Maybe to do with HDCP?
http://en.wikipedia.org/wiki/HDCP

The small symbols for bookmarks in the list does not show the right web page symbol? How can I get this right?

I have a lot of short cuts to web pages in the list just under the web address. The symbol showing should be that of the web page but for some of the links the symbol shows the wrong symbol. For example it could be that CNN has the symbol of BBC (I don't have this exact problem but just as an example).

This can be a problem with the file places.sqlite<br />
See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
*CheckPlaces: https://addons.mozilla.org/firefox/addon/10897
*Delete Bookmark Icons: http://www.sephiroth-j.de/1/mozilla/#delsiteicons

VL10B does not pick NB Po

Hi
Have a strange issue, VL10B does not pick the PO, cross company purchases
The delivery date is more than 60 dyas, while the delivery creation date is within VL10B std time period of 30 days.
Also do not get anything in VETVG
If I put route, VL10B starts picking the PO. And if I now remove the route and rerun VL10B the PO is still picked??
Any advise is appreciated..

Hello,
Make a variant for the transaction VL10B.
Run the transaction VL10B --> Remove all the entries --> Go to --> Variants --> Save as a variant.
Whenever you want to excute this transaction, call the variant from VL10B --> Go to --> Variants --> Get varints --> Execute.
Prase

Query Designer is not picking the host:port

Dear All
We have installed BI 7.0 on Netweaver 2004s alongwith BI Java. When we run a query and execute it does not pick the hostname:port but come as
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSD_C03_Q009&VARIABLE_SCREEN=X&DUMMY=1
Please check i have activated all services in SICF and SMICM - all the services is running
and i have added the icm/hsotnamefull in the instance profile also.
is there any thing missing.
Whether PI/Xi is to be also installed and u think it is necessry to configure SLD?
regards
balaji

Japnese yen is maintained in units of 100. Check the entry in TCURX table for Yen. That is why the value is getting multiplied by 100 and getting displayed.
JPY (Japanese Yen) and others have a 0 in the TCURR-CURRDEC field which means 0 decumals. SAP applications will process amounts in these currencies by dividing the input value by 100 for storing in tables. Then, when being displayed, it will do a conversion exit and multiply the stored table value by 100 to show the correct amount.
SAP stores currency values in a data type that has a fixed interpretation of two decimal places. There are some currencies that do not work well with that setting. Usually that is because for some currencies , a fraction o the currency unit is meaningless. That is true of the Japanese Yen, the Turkish Lira, Korean Won and many other currencies whose value is often 10 US cents or less.
Here's a full explanation of the decimal issue in SAP. It is not just
limited to BW but is a system-wide situation.
1. By default there are two decimals on the data base, e.g. 123.45
2. When there is no corresponding entry in TCURX, these two decimals
are displayed in the query.
3. When there is an entry in TCURX, it determines the division factor
when reporting. (default = 2)
Example TCURX = NO ENTRY: Database entry = 123.45
There is no division
The above number is displayed as 123.45
Example TCURX = 3: Database entry = 123.45
There is a division by 10 (because 3 - 2 = 1).
The above number is displayed as 12.345.
example INR currency.
Example TCURX = 0 Database entry = 123.45
There is a division by 0.01 OR Multiplication by 100

Weblogic 10.3.2.0 installation does not pick the right JDK

Similar Messages

Maybe you are looking for