Weblogic Socket Error

I am seeing the below message in the standard output. (FYI – WebLogic 10.0.1.0 is set up on the Linux server)
<Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Increasing the “thread-pool-percent-socket-readers” parameter in config.xml from 50 to 75 did not resolve this error. The below link talks about patch CR263825.
Is this patch applicable for WebLogic 10 ?
Weblogic Thread Management
Thank you

Similar Messages

Socket error in weblogic 7 when switching app to ssl

I am supporting an app that is running on weblogic 7.0.2.0. Because of security requirements I have been asked to enable SSL access and turn off the non-SSL listen port. I can enable the SSL port without issue but when I attempt to close the non-ssl port (so that users can only access via SSL) I get the following error in the log on startup.
####<Dec 7, 2009 12:34:21 AM GMT> <Error> <socket> <ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <000405> <Uncaught Throwable in p
rocessSockets
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Old socket closed and released FD before FDRecord still exists, resulting in two sockets for same FD, old socket:weblogic.socket.SSLFilter@25143a
, new socket:weblogic.ldap.MuxableSocketLDAP@6c9f34 ]>
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Old socket closed and released FD before FDRecord still exists, resulting in two sockets for same FD, old socket:weblogic.socket.SSLFilter@25143a,
new socket:weblogic.ldap.MuxableSocketLDAP@6c9f34 ]
Start server side stack trace:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Old socket closed and released FD before FDRecord still exists, resulting in two sockets for same FD, old socket:weblogic.socket.SSLFilter@25143a,
new socket:weblogic.ldap.MuxableSocketLDAP@6c9f34 ]
at weblogic.socket.PosixSocketMuxer.read(PosixSocketMuxer.java:567)
at weblogic.ldap.MuxableSocketLDAP.dispatch(MuxableSocketLDAP.java:148)
at weblogic.socket.SSLFilter.dispatch(SSLFilter.java:279)
at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:277)
at weblogic.socket.SSLFilter.dispatch(SSLFilter.java:279)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:770)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:694)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
End server side stack trace
<<no stack trace available>>
Initially I didn't see this problem in validation, but now that I have restarted the admin server and managed servers in validation I see the same error in both environments.
Does anyone have an idea of what might cause this error?
Thanks,
-Mike
Edited by: user3862080 on Dec 8, 2009 9:07 AM

We faced with the similar issue in WLS 7.X after below Assertion error after restoring services we were able to resolve this issue for time being as per the weblogic there is a patch provided by BEA and this sort of issue is resolved.
This issue has been identified and updated under cars CR103525
Regards,
CSR
BEA Analyst

BEA-101083 Connection failure.java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@16907c at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger

While trying to publish mesaage by MQ 5.3 .I got the following error
          Please help.
          <Error> <HTTP> <BEA-101083> <Connection failure.
          java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@1c94ff
          3 - idle timeout: '30000' ms, socket timeout: '30000' ms', in the configured timeout period of '60' secs
          at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger(SocketMuxer.java:775)
          at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
          at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
          at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
          at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:49)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)


Can you help me ? I have the same problem.

Weblogic.socket.MaxMessageSizeExceededException: Incoming message of size:

Hi ,
I have problems with the maximun message size using T3. I am trying to get large data from a remote client but i get the following exception(Here we are accessing jasper reports thru tomcat server from Weblogic,Tomcat and weblogic servers are in different machines). Even after setting the value -Dweblogic.MaxMessageSize parameter as '20000000', still the problem is alive on my tomcat system.
following is the error:
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'
weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'
Could any one suggest us to resolve this problem, Greatly appricated.
Regards,
Venkata Kumar

Hi,
Here we have weblogic and tomcat servers are running on different servers(Even both app server and web server on same m\c also we are facing same problem).this problem am facing while accessing jasper reports which contains results set more than 37000 records, am able to retreive the jasper reports successfully till 37000 records and if u provide query more than 37000 this is problem am encountering in tomcat side.I have deployed my jasper iReports stuff in weblogic server and web related stuff under tomcat server.
i am able to retreive the data successfully till 37000 records and more than that creating this problem on tomcat side.
Please let me know if you any more information on this issue.
Thanks a lot for quick response!
Thanks,
Venkata

Weblogic.socket.MaxMessageSizeExceededException

I have a long running one-way interface process...it takes like 2 hours to complete...after the process is completed when i click on the instance, the flow trace is not being seen..instead i see this error message...
Caused by: weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'
I tried increasing the value of Maximum Message Size in the weblogic admin console by going to Servers >> MyServer >> Protocols >> General tab >> Max Message Size
I kept the value to 100000000, but even though i am still facing the same error...
we are soa suite 11G, weblogic 10.3.4, please provide a solution for this....
Thanks,
Naresh

we changed it for the admin server as well as the soa server....we kept the value to be 50000000...
we also passed the argument in the server start subtab looking at the metalink document ID 1352342.1
-Dweblogic.MaxMessageSize=50000000
we passed this argument for both the admin server and the soa server....but still after the process is completed, i am still getting the same error...
its still showing the same error with the same number...
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'
please help...

Weblogic security error

          Hi folks,
          I'm not especially proficient with Weblogic, I haven't really done any development
          with it but I am a little familiar with configuring some pieces. Bearing this
          in mind, what follows is pretty sparse on details.
          My department has two deployments of the same application but one works and one
          doesn't. The error is below:
          Start server side stack trace:
          java.lang.ClassCastException: weblogic.security.acl.DefaultUserInfoImpl
               at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
               at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
               at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
               at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
               at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
               at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
               at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
               at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
               at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
               at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          End server side stack trace
          I'm not hoping that from this VERY limited information anybody can offer a solution,
          I'm not expecting that, I'm just hoping that someone can point me in a general
          direction i.e. the ACLS are corrupt, or something like that. Sorry for the lack
          of details. I'm testing the back end application and our front end app cannot
          see the back end, I've been tasked to find out why.
          Cheers, Max


          me again. :-) I just wanted to add that I posted this in the jms forum because
          the back/front ends communicate over JMS.
          - Max

Weblogic Unexpected Error

Hi All
I am getting the following error on Weblogic 6.1. I have not been able to reproduce this error.
Any clues as to what happened ?
Thanks,
Ravi.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x77fcbcd2
Function name=RtlSizeHeap
Library=C:\WINNT\System32\ntdll.dll
Current Java thread:
     at weblogic.socket.NTSocketMuxer.deleteIoStructure(Native Method)
     at weblogic.socket.NTSocketMuxer.deleteIoRecord(NTSocketMuxer.java:715)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:525)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Dynamic libraries:
0x00400000 - 0x00405000      D:\bea\jdk131\bin\java.exe
0x77F80000 - 0x77FFB000      C:\WINNT\System32\ntdll.dll
0x77DB0000 - 0x77E0B000      C:\WINNT\system32\ADVAPI32.dll
0x77E80000 - 0x77F35000      C:\WINNT\system32\KERNEL32.DLL
0x77D40000 - 0x77DB0000      C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78046000      C:\WINNT\system32\MSVCRT.dll
0x6D420000 - 0x6D4EF000      D:\bea\jdk131\jre\bin\hotspot\jvm.dll
0x77E10000 - 0x77E74000      C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7C000      C:\WINNT\system32\GDI32.DLL
0x77570000 - 0x775A0000      C:\WINNT\System32\WINMM.dll
0x6D220000 - 0x6D227000      D:\bea\jdk131\jre\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000      D:\bea\jdk131\jre\bin\verify.dll
0x6D250000 - 0x6D266000      D:\bea\jdk131\jre\bin\java.dll
0x6D3C0000 - 0x6D3CD000      D:\bea\jdk131\jre\bin\zip.dll
0x10000000 - 0x10005000      D:\bea\wlserver6.1\bin\terminalio.dll
0x6D340000 - 0x6D348000      D:\bea\jdk131\jre\bin\net.dll
0x75050000 - 0x75058000      C:\WINNT\System32\WSOCK32.dll
0x75030000 - 0x75043000      C:\WINNT\System32\WS2_32.DLL
0x75020000 - 0x75028000      C:\WINNT\System32\WS2HELP.DLL
0x785C0000 - 0x785CC000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000      C:\WINNT\System32\DNSAPI.DLL
0x77340000 - 0x77353000      C:\WINNT\System32\iphlpapi.dll
0x77520000 - 0x77525000      C:\WINNT\System32\ICMP.DLL
0x77320000 - 0x77337000      C:\WINNT\System32\MPRAPI.DLL
0x75150000 - 0x75160000      C:\WINNT\System32\SAMLIB.DLL
0x75170000 - 0x751BF000      C:\WINNT\System32\NETAPI32.DLL
0x77BE0000 - 0x77BEF000      C:\WINNT\System32\SECUR32.DLL
0x751C0000 - 0x751C6000      C:\WINNT\System32\NETRAP.DLL
0x77950000 - 0x77979000      C:\WINNT\system32\WLDAP32.DLL
0x77A50000 - 0x77B46000      C:\WINNT\system32\OLE32.DLL
0x779B0000 - 0x77A4B000      C:\WINNT\system32\OLEAUT32.DLL
0x773B0000 - 0x773DE000      C:\WINNT\System32\ACTIVEDS.DLL
0x77380000 - 0x773A2000      C:\WINNT\System32\ADSLDPC.DLL
0x77830000 - 0x7783E000      C:\WINNT\System32\RTUTILS.DLL
0x77880000 - 0x7790D000      C:\WINNT\System32\SETUPAPI.DLL
0x77C10000 - 0x77C6D000      C:\WINNT\System32\USERENV.DLL
0x774E0000 - 0x77512000      C:\WINNT\System32\RASAPI32.DLL
0x774C0000 - 0x774D1000      C:\WINNT\System32\RASMAN.DLL
0x77530000 - 0x77552000      C:\WINNT\System32\TAPI32.DLL
0x77B50000 - 0x77BD9000      C:\WINNT\system32\COMCTL32.DLL
0x77C70000 - 0x77CBA000      C:\WINNT\system32\SHLWAPI.DLL
0x77360000 - 0x77379000      C:\WINNT\System32\DHCPCSVC.DLL
0x775A0000 - 0x77625000      C:\WINNT\System32\CLBCATQ.DLL
0x777E0000 - 0x777E8000      C:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000      C:\WINNT\System32\rasadhlp.dll
0x74FD0000 - 0x74FEF000      C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000      C:\WINNT\System32\wshtcpip.dll
0x0A270000 - 0x0A2C5000      D:\bea\wlserver6.1\bin\oci816_8\weblogicoci37.dll
0x0A2D0000 - 0x0A2EA000      D:\Oracle\Ora81\BIN\OCI.dll
0x780A0000 - 0x780B2000      C:\WINNT\System32\MSVCIRT.dll
0x60400000 - 0x60506000      D:\Oracle\Ora81\BIN\OraClient8.Dll
0x60600000 - 0x60686000      D:\Oracle\Ora81\BIN\oracore8.dll
0x60800000 - 0x6084D000      D:\Oracle\Ora81\BIN\oranls8.dll
0x0A2F0000 - 0x0A2F6000      D:\Oracle\Ora81\BIN\oravsn8.dll
0x60200000 - 0x60265000      D:\Oracle\Ora81\BIN\oracommon8.dll
0x60000000 - 0x60122000      D:\Oracle\Ora81\BIN\orageneric8.dll
0x60A00000 - 0x60A2B000      D:\Oracle\Ora81\BIN\oranl8.dll
0x60B00000 - 0x60BA9000      D:\Oracle\Ora81\BIN\oran8.dll
0x60E00000 - 0x60E0D000      D:\Oracle\Ora81\BIN\orancrypt8.dll
0x61100000 - 0x61137000      D:\Oracle\Ora81\BIN\oranro8.dll
0x0A300000 - 0x0A361000      D:\Oracle\Ora81\BIN\orannzsbb8.dll
0x61500000 - 0x6150E000      D:\Oracle\Ora81\BIN\oranldap8.dll
0x61700000 - 0x61720000      D:\Oracle\Ora81\BIN\oraldapclnt8.dll
0x61900000 - 0x61906000      D:\Oracle\Ora81\BIN\oranhost8.dll
0x62100000 - 0x62106000      D:\Oracle\Ora81\BIN\oranoname8.dll
0x0A370000 - 0x0A376000      D:\Oracle\Ora81\BIN\orancds8.dll
0x62300000 - 0x62306000      D:\Oracle\Ora81\BIN\orantns8.dll
0x62500000 - 0x62508000      D:\Oracle\Ora81\BIN\orannds8.dll
0x0A380000 - 0x0A387000      D:\Oracle\Ora81\BIN\oranms.dll
0x0A390000 - 0x0A3A1000      D:\Oracle\Ora81\BIN\oranmsp.dll
0x62700000 - 0x62740000      D:\Oracle\Ora81\BIN\ORATRACE8.dll
0x62900000 - 0x62B23000      D:\Oracle\Ora81\BIN\orapls8.dll
0x63100000 - 0x63108000      D:\Oracle\Ora81\BIN\oraslax8.dll
0x60350000 - 0x60356000      D:\Oracle\Ora81\BIN\orawtc8.dll
0x63200000 - 0x63273000      D:\Oracle\Ora81\BIN\orasql8.dll
0x64700000 - 0x6470B000      D:\oracle\ora81\bin\orantcp8.dll
0x0C170000 - 0x0C175000      D:\bea\wlserver6.1\bin\wlntio.dll
0x6D020000 - 0x6D128000      D:\bea\jdk131\jre\bin\awt.dll
0x77800000 - 0x7781D000      C:\WINNT\System32\WINSPOOL.DRV
0x75E60000 - 0x75E7A000      C:\WINNT\System32\IMM32.dll
0x6D240000 - 0x6D246000      D:\bea\jdk131\jre\bin\ioser12.dll
0x6D1E0000 - 0x6D21B000      D:\bea\jdk131\jre\bin\fontmanager.dll
0x64300000 - 0x64308000      D:\oracle\ora81\bin\oranbeq8.dll
0x77920000 - 0x77943000      C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000      C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000      C:\WINNT\System32\PSAPI.DLL
Local Time = Wed Mar 05 15:34:02 2003
Elapsed Time = 9863
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1-b24 mixed mode)

Refer to
http://216.148.48.158/news/ArticleFrame.jsp?server=newsgroups.bea.com&group=weblogic.developer.interest.environment&article=<[email protected]>

Socket errors w/ JRockit?

We haven't isolated the problem to JRockit yet, but I'm wondering if there have
been any reports of unusual numbers of Socket errors w/ JRockit. We're getting
an unusually high number of "Socket closed" exceptions, both from Tomcat and our
own java.net.Socket using code.
Thanks,
Nick Wesselman
Digital Visions, Inc.

Dave,
Thanks! 8.0 solved our problems. Though I thought I'd inform you that running
Tomcat 4.1.18 w/ a heap of 256MB, we found that using gencopy GC would result
in the app becoming totally unresponsive after about 15 minutes. Though our heap
size isn't very big, we went to gencon GC and didn't experience the same behavior.
(though I'll also say that even 7.0 was much more stable than any standard JDK
we've tried... move over Sun!)
Nick Wesselman
Digital Visions, Inc.
David Simms <[email protected]> wrote:
Hi Nick,
I do believe we have fixed a socket bug or two in the new version
(JRockit 8.0), check out
http://www.bea.com/products/weblogic/jrockit/index.shtml .

When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

I have the same issue. Does anybody know why this has happened

If I copy the "lcds" folder, Tomcat starts with socket errors

In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications are not configured to use this same port.
Am I doing something wrong?
Thanks,
Borek

What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port in the LCDS web and in your new web app.
You can deal with this one of two ways:
Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

Imap performance and socket errors

-bash-3.00$ imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
SunOS vmpm1 5.10 Generic_141414-02 sun4u sparc SUNW,Sun-Fire-V490
We're experiencing imap problems that appear to be load related, and have had to restart mail services several times to restore service. The imap logs show a large number of socket errors. The server load average is in the 1-2 range; there's no apparent memory resource problem. We're seeing 600-1000 simultaneous imap sessions, which is a higher number than in the past. We run JMS & Communications Express on dedicated V490 SPARC server with 8GB of memory. We're planning to add an additional 8GB this Friday.
Our imap configuration settings are as follows:
-bash-3.00$ configutil | grep service.imap
service.imap.enable = 1
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.objectclass = top
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
Can you suggest additional troubleshooting steps? Do you recommend any configuration changes?
Thanks.

dpelinka wrote:
Questions:
1. Our JMS version info doesn't state whether it is 32 or 64-bit. Therefore, I assume we are running a 32-bit version. Is that correct?Correct. There is no 64-bit version of MS6.2.
2. Is there a virtual memory limit on the 32-bit version of JMS 6.2? Is the limit greater for JMS 6.3?The Solaris OS imposes the virtual memory size limit of ~3.75GB for all 32bit processes on SPARC. 64-bit processes have a much much larger limit.
http://developers.sun.com/solaris/articles/solaris_memory.html
Regards,
Shane.

Getting "Error Establishing Socket " error while running the application

Hi,
Can Any one help me as I getting the following error while inserting data into database for after some rows and will insert for some rows then again some error . I googled but but didnt get any proper solution.
Soultion what I got it is
1) turn off windows firewall.
2) change server TCP/IP settings.
3) It will give probelm with windows XP SP 2
I tried all but didnt able to solve that.
I am using Java 1.5, MSSQL server 2000,and eclipse 3.2,windows XP SP2
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.aztecsoft.quality.DatabaseConnectionQLTYSRV.getCon(DatabaseConnectionQLTYSRV.java:25)
at com.aztecsoft.quality.DatabaseQuery.getDaytoCountRow(DatabaseQuery.java:147)
at com.aztecsoft.quality.ProjectTrackerUtil.getNetworkDays(ProjectTrackerUtil.java:73)
at com.aztecsoft.quality.ProjectPlan.calODurationinDays(ProjectPlan.java:81)
at com.aztecsoft.quality.ProjectPlan.projectSummary(ProjectPlan.java:25)
at com.aztecsoft.quality.ProjectPlan.main(ProjectPlan.java:126)
Thanks in advance.

Hi this is gopi,Hyd.Is your Problem "Getting "Error Establishing Socket " error while running the application" solved if so can you reply me i am waiting for this answer

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

Unrecognized Windows Sockets Error: 0: JVM_Bind

I'm not entirely sure if I compacted this well enough, but after class declaration and method calling, it is essentially what my program does.
Server server = new Server(); // Creates a ServerSocket and binds it to a port.
Client client = new Client(server.getSocketAddress());
public Client(SocketAddress bind)
     try
          socket = new Socket();
          socket.bind(bind); // Problem here
          recieve = new Scanner(socket.getInputStream());
          send = new Formatter(socket.getOutputStream());
     catch (IOException e)
          e.printStackTrace();
}Running the above code produces the following exception.
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
     at java.net.PlainSocketImpl.socketBind(Native Method)
     at java.net.PlainSocketImpl.bind(Unknown Source)
     at java.net.Socket.bind(Unknown Source)
     at GameObjects.PlayArea$Client.<init>(PlayArea.java:318)
     at GameObjects.PlayArea.<init>(PlayArea.java:48)
     at MenuStates.GamePlayState.initializePlayArea(GamePlayState.java:90)
     at MenuStates.CreateGameState.mouseClicked(CreateGameState.java:106)
     at Manager.GameManager.mouseClicked(GameManager.java:428)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Window.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)I don't even know what this exception is, and I can't find anything that will really tell me what is going on. Can anyone tell me what is happening here?
I know that this question isn't directly related to Game Development, but I am using it in a game program, and I posted this question in the Network forum, and they flooded my topic with useless messages, and the only person who actually answered my question was extremely vague about it, even after I asked him to clarify. I am hoping that the good people of this forum will be more helpful.

In some cases, the server socket used to need more time to be available. If you run several test, you need time to reuse the same port (for Windows 7). I could try the following code:
Server server = new Server(); // Creates a ServerSocket and binds it to a port.
Thread.sleep(500); // Waiting for server to be available
Client client = new Client(server.getSocketAddress());
public Client(SocketAddress bind)
     try
          socket = new Socket();
          socket.bind(bind); // Problem here
          recieve = new Scanner(socket.getInputStream());
          send = new Formatter(socket.getOutputStream());
          Thread.sleep(500); // Time to execute the sme port in another test.
     catch (IOException e)
          e.printStackTrace();
}

Unrecognized Windows Sockets error: 10106: create

Am getting the following error when I use tcp-mon to sniff the HTTP traffic. Same when I use SOAP-UI.
I'm using windows 7 and using "jdk1.6.0_13". Any help on this pls .
java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
at java.net.Socket.createImpl(Socket.java:388)
at java.net.Socket.<init>(Socket.java:362)
at java.net.Socket.<init>(Socket.java:180)
at org.apache.ws.commons.tcpmon.SocketWaiter.halt(SocketWaiter.java:98)
at org.apache.ws.commons.tcpmon.Listener.stop(Listener.java:543)
at org.apache.ws.commons.tcpmon.SocketWaiter.run(SocketWaiter.java:87)

Winsock error 10106. 8 seconds in Google. Looks like something wrong with your operating system installation.

Weblogic Socket Error

Similar Messages

Maybe you are looking for