Webplayer Authentication pop-up message box while ...

So I was watching a stream in this case ESPN, however has happened previously on other channels.
When the popup-message box shown below appears, this has started happening recently when watching a stream via the webplayer.
I presume that this is something that end users should not be seeing, or if it is then the message should be clearer as to what end users are expected to do.
I have cancelled the popup without apparently affecting the stream.

.. I've just come across this for the first time and decided to search the community board for an answer. It does look like a server side process that uses wouldn't normally see, but at least when closing the username and password request, streams don't stop working. Suppose it could be a tad annoying if users have to continually canx this request.

Similar Messages

  • Disable the pop-up message box "How would you like to open this file" to open pdf file??

    Hi,
    is there any way i can stop the pop-up box displaying to open pdf file in sharepoint document library? Right now whenever i am trying to open pdf file, asking "how would you like to open"  Read only or edit mode. currently MIME Type is setup
    but still pop-up message box.
    Thanks in advanced!

    Hi ,
    As far as I know, This is a default feature. and is not recommended to delete or deactivate this pop up. 
    This is a feature of office and there is a dll called owssupp.dll which is responsible for getting the popup to open.
    You can go to IE tools> addon settings and deactivate the above dll (sharepoint open document class). But if you do so, then the other office office files which are word/excel/pptx etc.. would aslo gets affected and they also wont get the popup.
    Hope this helps.
    Best Regards, Ashok Yadala

  • Unable to use Instant messanger or SMS in Yahoo Mail. When selected the pop up message box does not open.

    While using Yahoo Mail I have a contact trying to IM me. I go to Conversation and there is no dialog box that shows his message. Yet at the top of the tab it says "Keith sent you a message". I also go to open a new message box for Instant messenger or SMS I should get a pop up box for that application. I am using FireFox 9.0.1 for a browser and my OS is Win.7.

    known issue, See:
    * https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    this issue maybe fixed in Beta, you should try
    * firefox.com/beta

  • How to get prompted message box while running BRs

    I am using Planning 11.1.1 with Hyperion Business Rule (not Calc Manager).
    I need to create a business rule for the the planning application, so that the user runs the BR, and if it does not meet the condition checking, the user should get a message box prompted (with customizable text message).
    Any suggestion is appreciated.
    Thanks

    John,
    Thanks for the reply. In fact, I have two questions regarding running the BR in Planning:
    1. Can we change the layout of the run time prompts while launching the BR (currently, my BR has quite a few RTPs, and we would like to group some of those together)?
    2. In the BR, I already define the RTPs. My case is that the BR will check the status of the account, if it is ok, then it will run the script; if it is not ok, it shall skip the calc script, but I would like to user get a message stating that nothing has been ran, because of the status is not ok. Do you think this also can be done using RTP?
    Appreciate your reply.

  • Pop up message box.

    Hi Experts,
    Just want to ask for the pop up message.
    Is there anyway for a pop up message to display only a "OK" button, instead of Yes, No and Cancel buttons.
    If no, is there any alternative way doing so?
    What I want to have in the alert message is the icon message with stop.
      DATA: defaultoption   TYPE STRING,
            title           TYPE STRING,
            textline         TYPE STRING,
    *        textline2       TYPE STRING,
            lv_popup_ans    TYPE STRING,
            cancel_display  TYPE STRING.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
          EXPORTING
           TITLEBAR                    = title
    *       DIAGNOSE_OBJECT             = ' '
           TEXT_QUESTION               = 'Testing for alert message with OK button only.'
           TEXT_BUTTON_1               = 'OK'(011)
    *       ICON_BUTTON_1               = 'TEST1'
    *       TEXT_BUTTON_2               = 'No'(012)
    *       ICON_BUTTON_2               = ' '
           DEFAULT_BUTTON              = '1'
           DISPLAY_CANCEL_BUTTON       = 'X'
    *       USERDEFINED_F1_HELP         = ' '
    *       START_COLUMN                = 25
    *       START_ROW                   = 6
           POPUP_TYPE                  = 'ICON_MESSAGE_CRITICAL'
    *       IV_QUICKINFO_BUTTON_1       = ' '
    *       IV_QUICKINFO_BUTTON_2       = ' '
         IMPORTING
           ANSWER                      = lv_popup_ans
    *     TABLES
    *       PARAMETER                   =
    *     EXCEPTIONS
    *       TEXT_NOT_FOUND              = 1
    *       OTHERS                      = 2

    Hi Vishal,
    Thanks for the reply & answer. The "OK" button and Icon is there. That is what I wanted.
    But the "OK" button is not defaulted?
    Everytime popup message display, I need to move my mouse cursor to click on "OK" button?
    Other suggestions would greatly appreciated.
    Hi vincent f, 
    Actually, the "POPUP_TO_CONFIRM" function is working fine for me, except the "NO" and "CANCEL" Button.
    I managed to remove the "CANCEL" button by changing
    DISPLAY_CANCEL_BUTTON       = 'X'
    to
    DISPLAY_CANCEL_BUTTON       = ' '
    But How about the "NO" button?
    How to remove it?
    Other suggestions would greatly appreciated.

  • Blank Message Box while using a 'raiseException'

    One of our customers has reported that they see a blank (no text at all) message box with only an 'OK' button.
    The issue not reproducible in any of our development environments. I checked that the following line of code is supposed to throw that error message:
    this.raiseException("PER:::PER_EMMNG_DEL_NO_CHANGE", "OBJECT_NAME", null, "Error");
    I tried to break the code in my dev environment and noticed that if the message name ("PER:::PER_EMMNG_DEL_NO_CHANGE") doesn't exist in the FND Messages, the message box simply shows the message name (no resolution to message description happens). Also, if the message name does exist but the message description is blank in FND Messages, the message ID (PER-15xxxx) is at least displayed.
    I could NOT reproduce the case where the message box was completely blank.
    Would there by any particular scenario which leads to this kind of a behaviour?
    Any pointers would be helpful.
    TIA

    Since your question is specific to Apps, you should ask in one of the Apps forums.

  • Message box on lower right saying "browser setting change - An unknown change was detected on your browser searcg settings: with the choice "KEEP CURRENT etrc.

    Using Firefox 17.0.1 I get a pop-up message box on the lower right saying:
    Browser settings change
    An unknown change was detected on your browser's search settings (2 choices)
    Keep my current settings
    I am aware of this change and approve it
    Selecting either choice ans clicking YES does nothing
    Clicking the X (exit) box does nothing.
    If I hover the cursor over the Firefox icon in the tray and move the cursor to the X box and click, the message box disappears, but comes back in a short while even if the browser has been inactive or even closed.
    What is this and how do I get rid of it?
    I have Firefox on other computers without this issue.
    Bob

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You may also have security software or malware that is causing this pop-up.
    *https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

  • "Please Wait" Message Box

    Hello!
    I´d like to know what´s the best way of creating a message box 
    with a "Please Wait" message that opens at some point and closes
    automatically after a sequence code?
    Thank you!
    Luanna

    Are you having a pop up message box in mind??
    my suggestion would be, keep a string indicator on front panel itself, make it appear and disappear like this
    Attachments:
    please wait.vi ‏22 KB

  • Pop up message -don't know if this is a virus or my computer is trying to tell me something else

    Hi: I have a Toshiba Satellite A215-S4757 and recently I started getting a pop up message occasionally while surfing the net that says "Cid Check Url   The application is disabled. Please,check your serial number". Can anyone tell me what this is, Thanks in advance

    Firefox 10.0.2 is a security update for Firefox 10.0.1. You are using Firefox 9.0.1 (which is no longer updated or supported), so you have missed Firefox 10.0 and Firefox 10.0.1 versions.
    You can update by doing one of the following:
    *in Firefox, click Help > About Firefox > Check for Updates
    *You can download the full installer, save it to your hard drive, close Firefox, run the installer
    **Download current Firefox version (choose OS and language): https://www.mozilla.org/en-US/firefox/all.html
    *See: https://support.mozilla.org/en-US/kb/Updating%20Firefox
    Finding your Firefox version: https://support.mozilla.org/en-US/kb/Finding%20your%20Firefox%20version
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Error message Box

    xfa.host.messageBox("Error!", "Hello world", 0, 0);
    This code in all lower versions of reader (upto version 7.0.9 ) would pop a message box with Hello world in the Title bar of the message box. the same code however in reader 8.1 shows Warning: javascript window - Hello world in title bar.
    Is there a way to over-ride this and just show the customized title bar?
    Thanks for your help.

    All prior versions? Only in versions 5.1 and above.
    It is a known problem. Adobe tightened up security restrictions too much.

  • I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission."  What's this mean?

    I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission."  What does this mean?  All files are closed; this iMovie project is the only thing open.  Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
    Thanks,
    Jamie

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    See also this post
    https://discussions.apple.com/thread/4434104?tstart=0
    Yours Bengt W

  • System wide modal message box pop-up from applet

    Hi,
    I am having an applet which is listening on a soket and has to pop-up a message box with the received data as and when it receives it.
    I have used JOptionPane.showMessageDialog() for this.
    Now, the requirement is the MsgBox should come up even if the user is working on another console/window. Btw, I am running the applet on windows-XP/2000 with JRE1.4.2. I have used null as the first parameter to the showMessageDialog function above, but its not popping up if I am workin in some other window.
    Anybody having ideas on how to do it, please reply.
    Thanks
    Sujit

    Pop up a Frame or JFrame showing the message. You can make it passably modal by having the applet nap while it's visible:
    JFrame msg = new JFrame( "Got Data!" );
    ...// add message
    msg.setVisible( true );
    // may not pop up instantly:
    while ( !msg.isVisible() ) pause( 10 );
    while ( msg.isVisible() ) pause( 50 ); // wait for user to close
    private static void pause( int millis ) {
       try { Thread.sleep( millis ); }
       catch ( InterruptedException e ) {}
    }

  • Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

    Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop.  (Same CS5 and plug-ins installed OK several years ago on a Vista laptop.  Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install.  Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."   Any solution?

    CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
    So this means you will have make a list of the updates that failed, go here: Product updates
    and manually download/install from there.
    Gene

  • I keep getting this pop up message while in iTunes -- MobileDeviceHelper has stopped working -- How do I get it to stop?

    I keep getting this pop up message while in ITunes -- MobileDeviceHelper has stopped working -- How can I get it to stop?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish.  after clicking OK that it would send an error report to Apple,

    macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish.  after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked.  Now the macbook will not turn on at all

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

Maybe you are looking for