WebService/SOAP Adapter

Currently we have some customers who send us a file through the HTTP. It is now a requirement that they send us the same file through a webservice.
A. Is it possible to Attach an XML file through a webservice?
B. Where do I or How do I develop such a webservice for them to access and upload the file.... Can I develop a webservice in XI itself and then if I give the customer some criteria then they can access this webservice?

Hi,
>>>>A: How do I use that attachment in XI? If I want to use the data in that attachment will I have to drop that file to a directoty somewhere womehow and then resend the attachment through a File adapter...
no you can put it directly inside XI flow try my blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
or you can write your own to get the file
>>>>B: With regards to my webservice on XI... Can I develop the webservice on XI including a functionality to upload a file and then all I have to do for my customer is give them the WSDL and they will be able to access my webservice?
yes you do everything on XI
>>>>C: Will the customer need a specific application to access the WSDL
no WSDL is a file, customer can access it with his development tool
Regards,
michal

Similar Messages

  • Security Issues: SSL on SOAP Adapter and Digital Signature in BPM

    Hi there,
    we're developing a R/3-XI-3rd Party Application scenario, where the XI/3rd Party communication is based on a webservice (SOAP adapter with SSL). Also, the messages in the XI/3rd Party communication must be digitally signed. I've got some questions on both subjects.
    1. About the SSL. I've started to investigate what will be necessary to enable the HTTPS option under SOAP Adapter (it's not enabled now). If I'm not correct, all I need to do is:
    - check whether the SAP Java Crypto Lib is installed in the Web AS;
    - generate the certificate request in the Visual Administrator and, after acquiring the certificate, store it with the KeyStorage option.
    Is that right?
    I'm considering that I won't need to use SSL in the ABAP Web AS, only the J2EE Java Engine (since the SOAP Adapter is based on J2EE).
    2. About the digital signature. As a first solution, we had decided on accessing a webservice based on another machine running a signature application. We'd send the unsigned XML and receive a signed XML. But since that needed to be done into the BPM, I thought that using a piece of Java code in a mapping would suit it better.
    But to be able to use the hashing/encrypting/encoding algorithms, which library needs to be installed? Is it the same SAP Java Crypto Lib that was installed for the SSL enabling?
    Thanks in advance!

    Hello Henrique,
    1. You're right. For detailed instructions please have a look at the online help: http://help.sap.com/nw04 - Security - Network and Transport Layer Security - Transport Layer Security on the SAP J2EE Engine
    2. The SOAP adapter supports security profiles. Please have a look at the online docu http://help.sap.com/nw04 -Process Integration - SAP Exchange Infrastructure - Runtime - Connectivty - Adapters - SOPA Adapter - Configuring the Sender SOAP adapter and from the link under Security Parameters to the Sender Agreement. You'll find some additional information in the following document: http://service.sap.com/~sapdownload/011000358700002767992005E/HowToMLSXI30_02_final.pdf
    Rgds.,
    Andreas

  • Receiver SOAP adapter -Async

    Hi  All,
    My scnario is SAP -PI--webService (SOAP adapter)  Asynchronous.
    In case of any error while processing the data into webservice, I think webservice  will pass back a relevant message to thePI through SOAP.  I am able to see only the error descrtion in the CC monitoring.
    How does PI interpret the XML which SOAP passes back in the event of an error during processing?Where we can find the XML message of the error?
    What is the functionality is in place in SAP-PI to get the returned information from the webservice in the event of an issue?
    Thanks in Advance
    Kartikeya

    Karthik,
    Asynchronous / synchronous  is decided by the sender system /adapter
    > I think webservice will pass back a relevant message to thePI through SOAP
    If it is Async the SOAP adapter will not  get the response back from the webservice
    Cheers
    Agasthuri Doss

  • XIServer error raised: 503 Service Unavailable with SOAP Adapter

    Hi,
    We are getting a very strange error from a process that is working fine in 2 other environments.
    We are sending a message into the SOAP receiver adapter and are getting the following error at the Call Adapter part of the process :
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>503</SAP:P1>
      <SAP:P2>Service Unavailable</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0 Transitional//EN&quot;&gt; &lt;html&gt; &lt;head&gt; &lt;title&gt;Error Report&lt;/title&gt; &lt;style&gt; td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active &lt;/style&gt; &lt;/head&gt; &lt;body marginwidth=&quot;0&quot; marginheight=&quot;0&quot; leftmargin=&quot;0&quot; topmargin=&quot;0&quot; rightmargin=&quot;0&quot;&gt; &lt;table width=&quot;100%&quot; cellspacing=&quot;0&quot; cellpadding=&quot;0&quot; border=&quot;0&quot; align=&quot;left&quot; height=&quot;75&quot;&gt; &lt;tr bgcolor=&quot;#FFFFFF&quot;&gt; &lt;td align=&quot;left&quot; colspan=&quot;2&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;4&quot; color=&quot;#666666&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;503 &amp;nbsp Service Unavailable&lt;/b&gt;&lt;/font&gt;&lt;/td&gt; &lt;/tr&gt; &lt;tr bgcolor=&quot;#3F73A3&quot;&gt; &lt;td height=&quot;23&quot; width=&quot;84&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt; &lt;td height=&quot;23&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt; &lt;td align=&quot;right&quot; height=&quot;23&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#FFFFFF&quot;&gt;&lt;b&gt;SAP J2EE Engine/6.40&amp;nbsp;&lt;/b&gt;&lt;/font&gt;&lt;/td&gt; &lt;/tr&gt; &lt;tr bgcolor=&quot;#9DCDFD&quot;&gt; &lt;td height=&quot;4&quot; colspan=&quot;3&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt; &lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt; &lt;p&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;3&quot; color=&quot;#000000&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;The requested application, AFW, is currently unavailable.&lt;/b&gt;&lt;/font&gt;&lt;/p&gt; &lt;p&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#000000&quot;&gt;&lt;table&gt;&lt;tr&gt;&lt;td valign=&quot;top&quot;&gt;&lt;b&gt;&amp;nbsp;Details:&lt;/b&gt;&lt;/td&gt;&lt;td valign=&quot;top&quot;&gt;&lt;PRE&gt;No details available&lt;/PRE&gt;&lt;/font&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;&lt;/font&gt;&lt;/p&gt; &lt;/body&gt; &lt;/html&gt;</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    We are on XI 3.0 SP13.
    Any suggestions ?
    Kind regards
    Colin.

    Hi Colin,
    Quick look into these-
    1) Are you able to test the WebService, because the error tells about unavailable...
    For more-
    /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
       /people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
    2) Is your SOAP Receiver COnfiguration is correct
       ~ http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
    3) Check the  wsdl is correct and try look into the input message for the Webservice(SOAP Adapter)
    Have a look into this thread-
    503 service unavailable
    Hope this helps,
    Regards,
    Moorthy

  • SOAP adapter on Integration Engine

    Hi,
    I recall something with a webservice/soap adapter which exists on the Integration Engine insted of the adapter engine.
    I cannot find any information about this service. Can you point me to a site with this information.
    /daniel

    Here is the information
    /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
    Regards,
    Prateek

  • Invoking a Webservice using a SOAP adapter

    Hi,
          I have the following scenario.
    SAP ABAP outbound proxy <-> SAP XI <--> External webservice.
    The above call is a synchronous call from SAP R/3 and a receiver soap adapter is configured for the Webservice.
    I am getting the following error messages when I try to run the scenario.
    1)ADAPTER.SOAP_EXCEPTION.
    2)<SAP:AdditionalText>
    soap fault: Server did not recognize the value of HTTPHeaderSOAPAction
    </SAP:AdditionalText>
    What could be the possible reasons for the error message?
    In the target URL of the soap adapter I am specifying the path till .asmx.
    Thanks,
    Leo

    Hi,
    There are 2 pieces of data that must be provided in the SOAP receiver adapter.  Both of them can be obtained from the WSDL of the soap service provider.
    1.  Target URL, which can be obtain from the attribute "location" of the "address" element in the WSDL.
    2.  SOAP Action, which can be obtain from the "soapAction" attibute of the "operation" element in the WSDL.
    Regards,
    Bill

  • XI SOAP adapter vs webservice testing tools

    Actually I have creted simple xslt mapping and managed to come up with exactly in the format of endpoint request format of the webservice.
    here is the payload( I have created the SOAP Envelop, Header and body in the payload)
    <?xml version="1.0" encoding="utf-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:eb="http://www.ebxml.org/namespaces/messageHeader" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
      <SOAP-ENV:Header>
        <eb:MessageHeader SOAP-ENV:mustUnderstand="1" eb:version="1.0">
          <eb:ConversationId>sucesss</eb:ConversationId>
          <eb:From>
            <eb:PartyId type="urn:x12.org:IO5:01">applevac.com</eb:PartyId>
          </eb:From>
          <eb:To>
            <eb:PartyId type="urn:x12.org:IO5:01">webservices.sabre.com</eb:PartyId>
          </eb:To>
          <eb:CPAId>P4XC</eb:CPAId>
          <eb:Service eb:type="sabreXML">session</eb:Service>
          <eb:Action>SessionCreateRQ</eb:Action>
          <eb:MessageData>
            <eb:MessageId>mid:[email protected]</eb:MessageId>
            <eb:Timestamp>2001-02-15T11:15:12Z</eb:Timestamp>
            <eb:TimeToLive>2001-02-15T11:15:12Z</eb:TimeToLive>
          </eb:MessageData>
        </eb:MessageHeader>
        <wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/12/secext" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/12/utility">
          <wsse:UsernameToken>
            <wsse:Username>5555</wsse:Username>
            <wsse:Password>password</wsse:Password>
            <Organization>L5x5</Organization>
            <Domain>DEFAULT</Domain>
          </wsse:UsernameToken>
        </wsse:Security>
      </SOAP-ENV:Header>
      <SOAP-ENV:Body>
        <eb:Manifest SOAP-ENV:mustUnderstand="1" eb:version="1.0">
          <SessionCreateRQ>
            <POS>
              <Source PseudoCityCode="P4XC"/>
            </POS>
          </SessionCreateRQ>
        </eb:Manifest>
      </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    I want XI to post just the payload and nothing else so....
    I selected Do not use envelope in the adapter configuration because we have every thing( SOAP envelop, header and body in the payload) but it is not working as i am still getting the same error message before implementing this xslt.
    Error Message:
    <StackTrace>com.sabre.universalservices.base.session.SessionException: errors.session.USG_CONVERSATION_ID_REQUIRED at com.sabre.universalservices.gateway.control.SecurityInterceptor.executeOnRequest(SecurityInterceptor.java:116) at com.sabre.universalservices.base.interceptor.Interceptor.execute(Interceptor.java:113) at com.sabre.universalservices.base.interceptor.InterceptorChain.applyInterceptors(InterceptorChain.java:32) at com.sabre.universalservices.base.interceptor.InterceptorManager.process(InterceptorManager.java:121) at com.sabre.universalservices.gateway.control.WSGateway.onMessage(WSGateway.java:415) at com.sabre.universalservices.gateway.control.WSGateway.handleRequest(WSGateway.java:313) at com.sabre.universalservices.gateway.control.WSGateway.doPost(WSGateway.java:247) at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter
    Do you have any idea like XI will add anything to this pay load when it sends out to the webservice?
    If i take the payload from the XI and try it in SOAPUI(tool to test webservice, you would know it already ) it works fine, I mean I was able to get the proper response but in XI it does not work.
    Any help in this regards is highly appreciated.
    we are using PI 7.0 and SP 9.
    Message was edited by:
            Venkat Marni
    Message was edited by:
            Venkat Marni

    Hi,
    Finally I could solve the problem.
    I was actually trying to post the information from the http client at the sender and receiver side I am getting the error.
    Later i have actually created the webservice for my sender interface in XI then post the info using the SOAPUI(3rd party tool) to post the info to XI and then Xi will communicate the webservice using SOAP adapter then I got the proper response from the webservice.
    In this whole episode I guess there is some thing wrong in using a htp client but technically we should be able to use http client as XI will take the payload and use xslt mapping to come up with target interface soap message( but i do not know why XI failed in that).
    thanks for all your help and hope this is clear.
    thanks,
    Venkat

  • Sender SOAP Adapter issue with webservices for authorization.

    Hi All
    Issue:
    As we are developing a Web Service to fetch account balance from SAP(upon receiving the account no from client) and have given the wsdl file to J2EE application  to call or make use of the service.  But as a part of that service they expect userid/password to be entered manually from client  pop-up.  At this point of time, we don't want to enter userid/password manually but  we want this to be hardcoded/embedded in Webservice so that  there is no need of manual intervention upon calling this service.
    Actual Requirement:
    From Webservices to R/3-ECC6.0-IS-Banking-RFC (Synchronous Interface)
    Sender: SOAP Adapter synchronous
    Receiver: RFC Adapter synchronous
    Note: Requesting a account number and getting response from RFC is account Balance and Date to webservice
    Regards
    Kiran kumar.s

    Hi praveen,
    Thanks for ur  reply.What you said is exactly right but for time being i have to make the client not get the authorization(password--Username and password(pop-up)) when he invokes the WSDL into webservice for that u told that to write some hardcode in J2EE application,but i don't know that where to write and what to write.so, if possible can u give me the code and procedure.
    This is the URL:
    http://hcl3sap:50000/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_SOAPSENDER
    Regards,
    kiran kumar.

  • SOAP Adapter:  Content Type Issue in WebServices via HTTP

    Hi,
    I have configured a Receiver SOAP adapter. When i had to test the message i had an HTTP 415 error.
    i found that the sender SOAP adpater that received this message is not capable of handling Content-Type: Application/XML i.e. which is being transmitted by the Receiver SOAP Adapter.
    Please let me know how to configure in the Receiver SOAP adapter so that the HTTP Content-Type would be TEXT/XML instead of Application/XML .
    Thanks in Advance,
    Venkatesh

    Hi Michal,
    I have created a Web service for a RFC function Module. The webservice is available in SOAMANAGER.
    It got activated also .  But whenever I tried to test, I am getting the below error,
    "Message Envelope not found. Probably Empty SOAP message"
            Request:
            POST /sap/bc/srt/rfc/sap/yotci_i015_linkp8sap/100/yotci_i015_linkp8sap/yotci_i015_linkp8sap HTTP/1.1
    Host: sapkrftewd01.krft.net:8030
    Content-Type: text/xml; charset=UTF-8
    Connection: close
    Authorization: <value is hidden>
    Content-Length: 657
    SOAPAction: ""
    <?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:YotciI015Linkp8sap xmlns:ns1='urn:sap-com:document:sap:soap:functions:mc-style'><IvParam1>POD</IvParam1><IvParam2>00006095</IvParam2><IvParam3>01/14/2009</IvParam3><IvParam4>PDF</IvParam4></ns1:YotciI015Linkp8sap></SOAP-ENV:Body></SOAP-ENV:Envelope>
             Response:
            HTTP/1.1 500 Message E 1S 406 cannot be processed in plugin mode HTTP
    content-type: text/xml; charset=utf-8
    content-length: 0
    accept: text/xml
    sap-srt_id: 20090224/141936/v1.00_final_6.40/49A4677A2D0736EDE10000000A3597E9
    server: SAP Web Application Server (1.0;700)
    Is this because of "do not use SOAP envelope" check?
    I didn't check this check box.
    If that is the error could you please tell me how to see the "do not use SOAP envelope"?
    Where can I find SOAP channel?
    I am very new to SOAP concept. 
    One JAVA application is going to invoke this Webservice from SAP.
    Please help me.
    Thanks,
    Bala.

  • SOAP Adapter with Webservice Provider URL

    This is what I did. Configured a Receiver SOAP adapter with SOAP 1.1 Message Protocol. Target URL is the WSDL URL Binding (SOAMANAGER) with authentication.
    When I test the scenario the Message is through PI and Communication Channel - No errors
    However strangely I do not see anything happening in ECC. Sometimes a log shows up in SOAMANGER "SOA Runtime Log/Trace Viewer" which has SOAP Runtime Error Information. This is very inconsistent again.
    I have tested SOAP with XI 3.0 Message Protocol and the messages are through in ECC. No problems there.
    Also Tried with directly using "SOAP Location URL" from within the Binding WSDL URL. This also results in DUMP in ECC.
    Does SOAP adapter with SOAP 1.1 Message Protocol support Webservice Provider in ECC EHP5(SOAMANAGER Binding)? Is it built to support this kind of scenario? Or only WS adapter can invoke the Binding URL?
    Is there any other URL that can be invoked with SOAP -SOAP1.1?
    Using PI 7.1 Service Pack 5.
    Pavan.
    Edited by: pavan sodani on Aug 12, 2011 4:57 AM

    Did you properly expose the RFC/Class in SOAMANAGER of the backend system? there is no endpoint created by default. You have to create and endpoint for a logical system (I guess). Then try calling the webservice from any 3rd party tool like Altova XML Spy. If that works then the ABAP webservice is working good and could be called from PI.
    VJ

  • Defining a Webservice for an XI SOAP Adapter

    Hi together,
    i have a little problem with an SOAP XI scenario.
    I have build an XML -> XI -> Idoc Scenario.
    Everything is working ok with the standard http request.
    Now i have made a new SOAP communication channel and set this one up
    with my message interface from the http scenario. After that i tried to generate
    a wsdl in the xi ( integration directory ). ( Scenario is Webservice -> XI -> Idoc )
    I send this file to one of our java programmers. He has to build the webservice
    on an other system. But he says that his system can not generate the webservice from the file.
    He gets this message in the Log Files:
    WSDL part <M2S_ROUTING> points to unavailable element with qname: {}<M2S_ROUTING>.
    Its my first time to set up an SOAP communication and i have no knowledge
    of java. I have tried to search in the forum, but there was no point for my
    problem.
    Can i use the normal message interface from my http scenario for the soap scenario?
    do i have to change something in the wsdl-file that xi generates?
    The url for the generation is ok. this one i have made like shown in "How To…
    Use the XI 3.0 SOAP Adapter".
    I also testet the scenario with XmlSpy and with that its works correct.
    Only the other system does not generate the webservice from the file.
    ( its is an NW2004 SP12 on an other server/network )
    Thanks for any answers,
    Carsten

    redefined question

  • SOAP Adapter = Webservice???

    Hi,
    I have created a service using the SOAP Adapter. My question is now: Is this service a webservice. If yes, how would I be able to obtain the related WSDL?
    The outbound interface is accessed by the following URL:
    http://myserver/XISOAPAdapter/MessageServlet?channel=:MY_BUSINESSSYSTEM:MY_COMCHANNEL
    simply adding the argument &wsdl to the url doesn't pass back any WSDL.
    Kind regards,
    Heiko

    hi,
    >>I have created a service using the SOAP Adapter. My >>question is now: Is this service a webservice
    yes having a soap adapter for a particular scenario makes that scenaro accessable by SOAP, ie webservice.
    >>http://myserver/XISOAPAdapter/MessageServlet?>>channel=:MY_BUSINESSSYSTEM:MY_COMCHANNEL
    >>simply adding the argument &wsdl to the url doesn't >>pass back any WSDL.
    i see where u r coming from , unlike ohter development platforms, where if you know the endpoint , adding &wsdl gives you the wsdl. But in XI we are merely exposing the interface to be accessable by a soap sender. Hence you have to generate the wsdl manually from Configuration Drectory. Tools->webservce
    cheers,
    Naveen

  • Webservice for proxy to SOAP adapter interface

    Hi Experts,
    we have scenario Proxy to SOAP for this inteface is it possible to provide the webservice from PI side.
    if yes please let me know the steps.
    i know the process how to provide the webservice when the SOAP adapter at sender side.
    1) through sender agreement---->Display WSDL.
    2) Tools---->Disply WSDL
    is it poassible to provide the webservice when SOAP adapter at receiver end by using 2 nd process?

    we have scenario Proxy to SOAP for this inteface is it possible to provide the webservice from PI side.
    if yes please let me know the steps.
    i know the process how to provide the webservice when the SOAP adapter at sender side.
    1) through sender agreement---->Display WSDL.
    2) Tools---->Disply WSDL -
    > yes that is possiable for only sender side as webservice because sender always consumer
    is it poassible to provide the webservice when SOAP adapter at receiver end by using 2 nd process?
    No that is not possiable to import WSDl File In receiver agreement because receiver always Provider .
    in ESR:
    wsdl file ll be imported in External defination as external message.
    in ID:
    in receiver Comm.channel -> call the soap URL and Soap Action(not manadatary)

  • Testing a "Receiver SOAP Adapter" - Calling a remote webservice from PI

    Hi ,
    I am trying to call a remote webservice from PI 7.0.
    The WSDL file is successfully imported to PI to create the required message types.
    The "receiver SOAP adapter" is configured as the communication channel.
    I would like to know the ways of testing  the remote webservice from PI 7.0.
    Thank you,
    Panda

    Hello there!
    I think this link should help you
    https://help.sap.com/saphelp_nwpi71/helpdata/en/46/793034608c0ad3e10000000a11466f/frameset.htm
    Thanks and regards,
    Caio Cagnani

  • Call Webservice with XI SOAP Adapter

    Hi there,
    I can't find sufficient information in the other posting about my scenario therefore I start a new again about XI and webservice.
    These parts are working:
    file adapter to XI and the SOAP Adapter is calling the Webservice (in the logfile I see the request from the XI)
    These parts aren't working:
    the response from the webservice
    Now my question:
    Is it necessarily to create a new Message Interface with communication channel from the webservice to XI or is it sufficient with an synchrony Message Interface and can I take a look of the response in the XI_Monitor.
    Where I can find information about an similarly scenario?
    THX for helping comments
    Kind Regards Johann

    Hi Johann,
             As others have adviced you dont need a seperate communication channel for the response message. Declaring your message interface as synch is enough.
    Also can you check <b>SXMB_MONI</b> for the request and the response messages. Just use transaction SXMB_MONI. and see if you get checked flags(successfull) or a red flag (error) for your messages.
    But Could you pls tell me if your are using the BPM for your scenario?? 
    If you are not getting response from the web service it could aalso be that the WEB Service is not working properly.
    First try to access the web link for the website using IE.
    Pls read the following for your reference:
    <b>In the SENDER SOAP ADAPTER, you will need to put the URL provided by the company and the SOAP ACTION to invoke a particular WEB METHOD. You will also need to provide URL Authorization, Proxy settings.
    make sure you are using the right SOAP ACTION.</b>
    Hope this helps or revert back.
    Regards,
    Ashish

Maybe you are looking for

  • How can you get rid of Genius function without losing iTunes 8.0?

    I recently updated iTunes to Version 8.0 with the Genius function, but I have the feeling that this program is taking up space on my hard drive that I don't want to lose. I understand that you can turn off Genius in the Store menu, but it's still on

  • Interest calculation on overdue customer open items

    Hi. I need to calculate the interest on the customer overdue open items. for that i have configured the following steps. OB46 - Interest Settlement Calculation Type OB82 - Interest Terms  OBAC - Define Reference Interest Rates  OB83 - Enter the Refer

  • Saving a Sales Order

    Hi All: How can we save a sales order in WebUI without submitting it for processing. The idea is that a person can come back to the saved and not submitted sales order and can work on it befor doing the final submission to the system(ECC)? Regards

  • [SOLVED] lib32-libgpg-error and lib32-libgcrypt no longer working

    The Dell 1320c printer requires a workaround of using it with a FujiXerox DocuPrint C525a driver, which only exists for 32bit systems.  In order to get it running, you need to manually copy the files to the proper locations.  With the new upgrade on

  • Media Encoder crash in CS6. Could not read from the source. Check if it has moved or been deleted.

    I'm having a problem getting Media Encoder to get past the dynamic link portion of encoding a time line sequence. I can send it over to Media Encoder, but it crashes consistently after the yellow bar saying something about dynamic link. I have CS6 in