Website uses foxpro to produce report with barcode and barcode shows as text instead of barcode

view source code shows the code below
<pre><nowiki>
<td>*16001533779*
</nowiki></pre>
what must I do to have barcode show as barcode and not text?

You would need to have a font installed to show this barcode if there aren't images used.
face="Free 3 of 9 Extended" specifies that the "Free 3 of 9 Extended" should be used.
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Similar Messages

HT204409 I am unable to connect to my Wi-Fi at home, but am able to connect at work. Using my new iPad 4G with cellular and a Motorola SBG6580. My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

I am unable to connect to my Wi-Fi at home, but am able to connect at work. Using my new iPad 4G with cellular and a Motorola SBG6580. My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I need to make a report with graphs, and generate an exit file to word

I have to do the acquisition for a laboratory and to make inmediately a report with graphics and a constant test about the method of the experimentation

Probably your best bet is to use ActiveX and control Word from LabVIEW, this way, you can act as you were using Word directly, automating all the steps to create your report. Look for examples in the developer zone, although there will be more examples relating Excel, that can show you the way to act. If you need to use this intensively, i think NI has created a Word toolokit that you can buy.
For any particular question, just ask.
Good luck

Connecting Crystal reports with dashboards and passing parameters

Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.

Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu

Enhancing Customer Reports with Commands and Parameters

Hi All,
I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US". Has anyone faced the problem, can anyone please help to remove this runtime error.
Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
Regards
Poonam

True, the application property service is apparently not to be used for a real-life scenario
You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
in our case it forced the server down with deadlocks. 
This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.

Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.

The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
Could you provide me with a link to the documentation for the logging framework?
<a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0.

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

Is there any way to darken the gridlines in iCal? I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

Is there any way to darken the gridlines in iCal? I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

Can anyone help me plz. My ipad will not charge. I am using the cords that came with it and it still wont charge

Can anyone please help me. I have had my ipad2 for about 5 months and it has worked fine. I am now having issues charging it. I am using the cords that came with it and the outlet that I have used to charge it in the past, but when plugged in it is recconoigzed, but states not charging. I have made sure all my updates are current and they are. Does anyone have any suggestions or helful advice that my help. Thanks in advance.

Are you plugging it into a pc? If so it will not charge the iPad as there is not enough power try the back USB ports, may work.
If it isn't plugged into a pc and plugged into your socket could be faulty socket adapter.

Is there any ECC report with PurchOrder and Purchase Requisition Selection

Hi there,
for one of my BI report reconciliation with ECC requirement, I would like to know how many POs are there without Purchase requisitions, same way want to know how many POs are there with Purchase requisition.
I know some tables where we can find this info, unfortunately I cannot ask my user to go and check in Tables for Acceptance testing. So I am looking for any standard ECC report with POs and PRs as Columns
Due to time constraints, I cannot go build any ABAP queries in ECC at the moment,
Any insights are greatly appreciated.
Thanks

Hi Curious ,
Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
Or try the following transactions:
ME5A - Purchase Requisitions: List Display
ME53 - Display Purchase Requisition
ME53N - Display Purchase Requisition
Hope this helps your cause.
Regards,
Kush Kashyap

When I play videos (on any website, using any browser) they play really fast and there is no sound.

When I play videos (on any website, using any browser) they play really fast and there is no sound.

http://forums.adobe.com/thread/1026022?tstart=0
https://bugbase.adobe.com/index.cfm?event=bug&id=3216334
https://bugbase.adobe.com/index.cfm?event=bug&id=3217331
https://bugbase.adobe.com/index.cfm?event=bug&id=3219780
https://bugbase.adobe.com/index.cfm?event=bug&id=3229264

Anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, less cheaper

anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, with add costs?

There are two versions of the current iPad, the WiFi only (which will work anywhere in the world, but only connect to WiFi networks) and the 3G/4G model. The latter will connect to 3G networks worldwide, as I understand it, but the only 4G networks it can connect to are in the US and Canada.

I am using Sansung Galaxy S III with Verizon and when i am calling out to somebody they recieving my call as RESTRICTED CALL...

I am using Sansung Galaxy S III with Verizon and when i am calling out to somebody they recieving my call as RESTRICTED CALL...
Let me know, please, how can I change settings in my phone to clear option of restricted out going calls...
Thank's a lot

Hi there Altercc!
We definitely want others to know when you're calling them. This could be fixed two ways.
First we have an option called Share Name ID available via vzw.com: http://bit.ly/SsGi9e
We also have the opportunity to Block your Caller ID from displaying. This is a feature we can easily remove if it's active.
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport

A possible reason to problems with HomeSharing and TV shows

I discovered this bug and it may account for some of the problems people describe having with HomeSharing and TV shows (Shows or episodes missing when accessing a homesharing library).
If one selects one or several TV shows (individual episodes or whole season) in iTunes, only those selected will be visible when accessing the shared library from another mac. To fix it, I have to disconnect from the shared library (clicking eject arrow), deselect the TV shows (in list view using the column browser, select All Genre, All Shows and All Seasons) and then reconnect to the shared library.
This problem dos not occur with Movie or Music files.
The problem do not apply if accessing the library from an iOS device (iPod Touch,iPad2,iPhone4, iPhone5).
The library is shared by a Mac Pro (mid-2010, 10.8.2, iTunes 11.0.1(12)) and the problem occurs when accessing the library from a MacBook Pro, iMac and Mac mini (all using iTunes 11.0.1 under 10.7 or 10.8). All TV shows are home-ripped or home-recorded and do not use any DRM.

If i select music on my machine using the column browser then only the selected music appears under music on in the home share on my wifes machine. If I select the top entry eg Steve's Library then everything shows.
Just tried it for TV Shows and it does the same
Resolved it by removing any selection on my machine, Ejecting the Home Share on my wife's machine. Re selected the Home Share and it reloaded the full list

I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

mono 8 bit 8k is 64kbps, yes. 8 bits times 8,000 = 64,000 = 64k bits/sec.
And yes I think that's a typo - there's no such thing as 'Mone' that I've ever heard of...
But you might want to check to find out if this is a mu-law non-linear format, possibly - there are several ways that 8 bit 8k wav files can be encoded, and typically phone systems don't use linear ones. If you have a log-in to Zultys' user-base system they have an FAQ there, I believe - the answer might be in that, and it won't cost $500.

Using Run_Report_Object() To Call Reports with a Parameter Form

Hi
I have successfully migrated a version 5 application to 10g but, I'm having a particular issue with reports run from a menu.
The report has 3 user parameters and they previously worked with a client server parameter form.
How do I pass the parameters from the report to the RUN_REPORT_OBJECT in the pl/sql editor in the menu ?
In my other reports I have used a :block.item bind variables but in this case there is no datablock involved.
Any help with the correct syntax will help.
Message was edited by:
4dyomi
Message was edited by:
4dyomi

Dear Friend,
You can use following code to run a report from "Forms10g" using RUN_REPORT_OBJECT. Directly copy below code to your forms10g and make appropriate changes. In the code, "Manish" is the name of report server running on your application server. To start report server u can run this command on command prompt on your application server.
rwserver server=<server_name>
This command will start report server. In below code i have a text box called "ADDRESS_CODE" which i am passing as a parameter to report which conatains a parameter called "SUBCODE". This is a tested code and works fine in Forms10g DS.
declare
 cnt number(3);
 report_id report_object;
 REPORTSERVERJOB VARCHAR2(100);
 VJOBID VARCHAR2(100);
 REPORTSERVER VARCHAR2(50) := 'MANISH';
 V_URL2 VARCHAR2(500);
 V_URL VARCHAR2(100);
 PARA PARAMLIST ;
begin
 PARA := CREATE_PARAMETER_LIST('INPUT1');
 --'ADDRESS_BOOK' IS A REPORT OBJECT DEFINED
 REPORT_ID := FIND_REPORT_OBJECT('ADDRESS_BOOK');
 --FOLLOWING PARAMETERS ARE MANDATORY PARAMETERS TO SET REPORT OBJECT
 SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'HTMLCSS');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, REPORTSERVER);
--TO SEND PARAMETERS TO REPORT ADD FOLLOWING CODE, (:ADDRESS_CODE IS A TEXT ITEM)
ADD_PARAMETER(PARA,'SUBCODE',TEXT_PARAMETER,:ADDRESS_CODE);
--RUN REPORT OBJECT TO FETCH JOBID
REPORTSERVERJOB := RUN_REPORT_OBJECT(REPORT_ID,PARA);
--VJOBID IS JOBID THAT IS SET AT RUNTIME BY REPORT SERVER
vjobID := substr(ReportServerJob,length(reportserver)+2,length(ReportServerJob));
v_url := '/reports/rwservlet/getjobid'||vjobID||'?server='||reportserver;
 Web.Show_Document(v_url,'_blank');
 DESTROY_PARAMETER_LIST(PARA);
end;
Regards,
Manish Trivedi
Software Developer
Ambuja Cement,
India.

Website uses foxpro to produce report with barcode and barcode shows as text instead of barcode

Similar Messages

Maybe you are looking for