WebUtil and JVM Pooling

I have looked at the java importer functions in the webutil library supplied with 10.1.2.0.2 and it seems that it has not been prepared for JVM Pooling.
Is a version of the pll available which has the javaclasses re-imported with JVM pooling options?

Hi,
according to Forms development WebUtil 1.0.6 (aka 10.1.2.0.2) has jvm pooling compatible pll file.
Frank

Similar Messages

JVM Pooling -- Why ??

What is the purpose of JVM pooling, We are not using JAVA at all, we have only Forms and Reports stand alone. Is it still good for us. Can somebody explain.

I think we need more details
The later versions of Forms uses java on the client, servlet and server "tiers". E.g. the Forms servlet and the Listener servlet is java, running on oc4j, which also is java. Which "java" are we talking about here?
Forms JVM Pooling, if this is what op asked about, refers to the Forms runtime process use and sharing of JVMs for executing java code of Forms modules.

Lync 2013 Enterprise load balancing on the front end and edge pool

Hi,
I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers). I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers. I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
balance my front end pool. I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
Can someone clarify the front end requirement?
Also - looking now at the edge pool - this site again have two edge servers in a pool. We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com). These will be
NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443. I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
Persevere, Persevere, Per..

That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
The description on the calculation tool also describes this correctly:
Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
Lync web services)
You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices. Both are applicable for the Front-End so you have either
full HLB for both SIP and HTTP(S) traffic
DNS LB for SIP traffic and HLB for HTTP(S) traffic
Hope this is more clear :-)
Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

SharePoint - Error_1_Error occurred in deployment step 'Add Solution': Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was rea

Hi,
I am Shanmugavel, SharePoint developer,
I am facing the below SharePoint 2013 deployment issue while deploying using VS2012.
If i will deploy the same wsp or existing wsp
(last build) using direct powershell deployment, the solution adding properly, but the same timeout exception coming while activation the features. Please find the below error.
I tried the below activists:
1. Restarted my dev server, DB server.
2. tried the same solution id different server
3. tried existing wsp file (last build version)
4. Deactivated all the features, including project Active deployment configuration.... but still i am facing the same issue.
I hope this is not coding level issue, because still my code is not start running, before that some problem coming.
Please help me any one..... Last two days i am struck because of this...

What you need to understand is the installation of a WSP does not do much. It just makes sure that you relevant solution files are deployed to the SharePoint farm.
Next comes the point when you activate the features. It is when the code which you have written to "Activate" certain features for your custom solution.
Regarding the error you are getting, it typically means that you have more connections (default is I guess 100) open for a SQL database then you are allowed to.
If you have a custom database and you are opening a connection, make sure you close it as well.
Look at the similar discussion here:
The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool
size was reached[^]
I would suggest further to look at the
ULS logs[^] to get better insight.
Manas Bhardwaj's Stream : www.manasbhardwaj.net

Webutil and SQLLDR

It used to be on the client server when we run a batch file with sqlldr from a form, a cmd window would open and we can actually see a count of the records, and if we want we could make it that the user would have to click a button to close the cmd window and return to the form.
Now with the web version and webutil, I was able to make the batch file work and the data is loaded into a table, however, when the cmd window opens, it stays blank and you cannot see what is happening.
Is there a way to get the same performance as the client server version?
Thanks
George

Hi,
You can read the output/log file using textio (implemented through webutil)
and give a message to the end user.
Alternatively use the webutil host to open a command window and pass batch file which will do the sql ldr ....
Rajesh Alex

WebUtil and Jacob Setting for AIX Server

Dear All
I am using forms 10G.
I have done the setting for webUtil and Jacob in my pc for browse button to be and it is working fine .
But can any one please tell me the steps for implement these things in AIX server .I mean how to configure this to utility Webutil and Jacob in AIX server .
Kindly anyone tell me what needs to be done in server for webutil ?
Edited by: LuKKa on Sep 22, 2010 12:01 PM

the steps are same as in other supported systems.
Since my blog is failed to help you then i will recommend you to do some more reading ...
Read the docs http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html

Webutil and Office 2010

Has anyone else experienced any issues with webutil and MS Office 2010? We save .xls files to .csv and upload via webutil (10g). We are getting an error that the file on the root directory cannot be found, although it does exist. We found that if we saved as Office 2003 and then as a .csv file, it sometimes works. We never had this problem before upgrading to Office 2010. I ran the form in debug and confirmed it is bombing out on the client_text_io open command.
thanks in advance

I think we figured out it was also a Windows7 issue more than Excel. The Windows7 doesn't have a temp directory any longer, but we were able to create another directory (with a more meaningful name) and read/write to it. The webutil works fine now. Seemed like it was maybe a root directory permissions problem.
thanks

WebUtil and ActiveX

What is the correlation between WebUtil and ActiveX?
The reason I ask is that we have successfully installed WebUtil on our 9iAS R2 apps server and the Webutil forms that were created all work perfectly on site.
However our WAN covers sites all over the UK and the majoiry of these sites have all ActiveX settings disabled for security reasons. When accessing from one of these sites the form correctly loads all the .dll and .jar files but the CLIENT_TEXT_IO procedure will not operate.

... one thing I forgot. Duncan Mills, who could answer this question a lot better than I can, is on vacation this week.
Frank

Webutil and XP

Hi,
We have a form in which we use the call web.show_document(l_url, '_blank'), where l_url is a location of an html file on a local pc. Then in a
seperate browser the html file is shown.This works fine for our application.
Now some users are migrated to XP as OS, instead if 2000.. For these users no webbrowser is started after the call to show_document. In the
javaconsole is also no error seen. It is just that nothing happens.
In IE and Firefox this problem occurs.
Is there an issue between webutil and XP? Or is this a different kind of problem?
Richard

Thx for quick reply..
We tried it.. But, problem keeps existing...
We also tried XP and IE6... again no browser appears ...
This is the information in the Java Console..
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\OPERATORProxy Configuration: Manual Configuration
Proxy: dasproxy:80 Proxy Overrides: <local>JAR cache enabled
Location: C:\Documents and Settings\OPERATOR\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://xxxxx:7778/forms/java/frmall_jinit.jar from JAR cacheLoading
http://xxxxxxx:7778/forms/java/frmwebutil.jar from JAR cacheLoading
http://xxxxxxx:7778/hsd65java/hst65.jar from JAR cacheLoading
http://xxxxxxx:7778/dasimages/das_images.jar from JAR cacheRegisterWebUtil
- Loading WebUtil Version 1.0.6
Loading http://xxxxxx:7778/forms/java/jacob.jar from JAR
cacheproxyHost=nullproxyPort=0connectMode=HTTP,native.Versie van Forms-applet is: 10.1.2.0

Webutil and Outlook - I get a WUO-714 and WUO-705 error

Hi,
I have installed webutil and it loads fine an all. However, I have a problem with a Microsoft Outlook integration. I am simply trying open an Outlook mail item, which is then filled out with some data. Pressing the Send button is up to the user.
Everything works until the line "mailitem2 := CLIENT_OLE2.INVOKE_obj(MailItem,'Display');" is called. Here Forms reports back: "100501: non-Oracle exception" and the java console gives a WUO-714 and WUO-705. The problems seems to be the Display method. At that point, despite errors, I do have an open, visible mail item with the proper data filled in. (In this process I noticed that the final invoke_obj should happen after you write stuff into the To, Subject and Body of the mail, but that's besides the point.)
Any advice you can offer is welcome.
Sincerely,
Jesper Vad Kristensen
Aarhus, Denmark
--- Java console error codes --
Loading http://oiatst01.tdk.dk:7778/forms90/webutil/webutil.jar from JAR cache
Loading http://oiatst01.tdk.dk:7778/forms90/webutil/jacob.jar from JAR cache
Loading http://oiatst01.tdk.dk:7778/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
2003-nov-17 09:42:50.624 ERROR>WUO-714 [OleFunctions.setExceptionValues()] Unable to get the last OLE Error details; Exception
null
2003-nov-17 09:42:50.634 ERROR>WUO-705 [OleFunctions.invoke_ret_obj()] Unable to invoke Method: Display; Exception
com.jacob.com.ComFailException: VariantChangeType failed
--- end ---
--- Form code ---
Declare
     OutlookApp      CLIENT_OLE2.OBJ_TYPE;
     Folders      CLIENT_OLE2.OBJ_TYPE;
     MailItem      CLIENT_OLE2.OBJ_TYPE;
     MailItem2      CLIENT_OLE2.OBJ_TYPE;
     OLEPARAM      CLIENT_OLE2.list_type;
     v_kundenummer     varchar2(12) := :v_engagement.konto;
     v_firstname      varchar2(50) := :legal_person.firstname;
     v_surname           varchar2(50) := :legal_person.surname;
     v_company_name      varchar2(50) := :legal_person.company_name;
     v_to                varchar2(50) := '[email protected]';
     v_cc                varchar2(50);
     v_body                varchar2(250) := 'Kundenummer'||' ' ||v_kundenummer||chr(10)||v_firstname||' '||v_surname||' '||v_company_name;
     v_bcc                varchar2(50);
     v_subject           varchar2(50) := 'Fakturakopi';
     v_duedate           varchar2(50);
     v_invoicetext      varchar2(400);
     v_user                varchar2(50):= user;
     v_faktura           varchar2(400);
BEGIN
     /* snip some string work to create Body contents */
     OutlookApp := CLIENT_OLE2.CREATE_OBJ('Outlook.Application');
     --Create a newMail Object
     OLEPARAM := CLIENT_OLE2.CREATE_ARGLIST;
     CLIENT_OLE2.ADD_ARG(OLEPARAM,0);
     MailItem := CLIENT_OLE2.INVOKE_OBJ(OutlookApp,'CreateItem',OLEPARAM);
     CLIENT_OLE2.DESTROY_ARGLIST(OLEPARAM);
     -- Show the new message box. - Dont do when mailing straight Through
     CLIENT_OLE2.set_property(MailItem,'To',v_to);
     CLIENT_OLE2.set_property(MailItem,'Subject',v_subject);
     CLIENT_OLE2.set_property(MailItem,'Body',v_body);
     mailitem2 := CLIENT_OLE2.INVOKE_obj(MailItem,'Display');
     CLIENT_OLE2.RELEASE_OBJ(MailItem);
     CLIENT_OLE2.RELEASE_OBJ(MailItem2);
     CLIENT_OLE2.RELEASE_OBJ(NameSpace);
     CLIENT_OLE2.RELEASE_OBJ(OutlookApp);
     /* snip some more */
     exception
     when others then
     message('other error: '||sqlerrm);
--- end ---

Both the Outlook type library and the M/S online documentation show that the display method on MailItem does not have a return type. try a simple INVOKE rather than INVOKE_OBJ

[Fwd: Re: rdbms realm and connection pool]

Hi,
One reason why I would like to use the connection pool for the RDBMS
realm is because there is the retry machanism built into the connection
pool. With this retry, I don't need to re-start WebLogic if the DB
server is somehow re-started. With the current implementation, all the
connections maintained by the realm will become invalid if the DB server
has been restarted independently.
-------- Original Message --------
Subject: Re: rdbms realm and connection pool
Date: Wed, 27 Sep 2000 09:32:47 +0100
From: "Terry" <[email protected]>
Reply-To: "Terry" <[email protected]>
Organization: BEA SYSTEMS Inc
Newsgroups: weblogic.developer.interest.security
References: <[email protected]>
I believe not- the realm restricts access to connection pools to those
who
are allowed it, so if the realm needs the connection pool to start up,
and
you can't open the connection pool without the realm then you have a bit
of
a no-chicken and no-egg situation, which is I believe one of the reasons
why
there is no use of connection pools, ejbs, jndi, servlets etc. in the
realm
(along with other reasons, like why would it be provided with a servlet)
The delegate pool acts somewhat similarly to a connection pool, and can
even
use the same database, so I'm not sure what the advantage would be
Terry
Nirmala devi <[email protected]> wrote in message
news:[email protected]..
>
I think the rdbms realm uses different connection as it need to be setbefore
the connection pool for Database.Is there any that i can point my rdbmsrealm to use
the connection pool for Database instead
Thanks in advance
Nirmala

I believe not- the realm restricts access to connection pools to those who
are allowed it, so if the realm needs the connection pool to start up, and
you can't open the connection pool without the realm then you have a bit of
a no-chicken and no-egg situation, which is I believe one of the reasons why
there is no use of connection pools, ejbs, jndi, servlets etc. in the realm
(along with other reasons, like why would it be provided with a servlet)
The delegate pool acts somewhat similarly to a connection pool, and can even
use the same database, so I'm not sure what the advantage would be
Terry
Nirmala devi <[email protected]> wrote in message
news:[email protected]..
>
I think the rdbms realm uses different connection as it need to be setbefore
the connection pool for Database.Is there any that i can point my rdbmsrealm to use
the connection pool for Database instead
Thanks in advance
Nirmala

How can I make WL 8.1 flush the cache and/or pool for 1.1 EJBs

Hi,
I'm using 1.1 deployment descriptors for my CMP entity bean that were previously
used in the WL 5.1 version of my project.
Things do get deployed but I've observed confusing information when monitoring
the EJB via Admin Console.
What appears is that the Weblogic container is not flushing the cache and/or pool
after the bean has finished processing and also a sufficient time has expired
(i.e. the idle-timeout-seconds)
From what I've understood via the on-line information is that each EJB has its
own cache (since I've not done anything special for that) and the instance in
cache is only passivated when the cache is full and the server need to activate
another instance. On passivation, it appears to be returning the instance to the
pool. But its unclear/undocumented when the pool is cleared, if at all.
What I want is that:
1. A way to get my cached instance passivated
2. A way to get my pooled instance flushed.
The reason I'm looking into this is becasue in my case it appears that the cached/pooled
instance are contributing to OutOfMemory errors and because of the nature of requirements,
etc. we need to have the cache size be high for certain processing.
Thanks
Parasher

I think it's probably best to contact technical support about this.
There are different patches for different versions of WLS.
I'd mention 'CR128026' to them to get started.
-thorick
"Parasher" <[email protected]> wrote:
>
Hi,
Thank you for your reply !
How can I get more information about this patch and the patch itself
Is there a way I can look it up online or do I have to contact the support
folks
and if so what should I need to tell them to convey which patch I'm talking
about.
Thank you in advance.
Parasher
"thorick" <[email protected]> wrote:
Hi,
If you use 'Database' concurrency, then there is a patch available for
some 8.1
service
packs to enable idle-timeout-seconds on the cache. I believe that this
will be
standard
feature with the next service pack. There is no comparable mechanism
for the
pool in 8.1,
this is a feature that is coming with the next major release of WLS.
If the
8.1 patch works
for you, it can save you memory during off peak usage times. Notethat
this
patch does not
work for 'Exclusive' concurrency.
-thorick

OES11 SP2 - Linux File System and NSS Pools & Volumes

Planning to install our first OES11 SP2 server into an existing tree - the
idea is to run this new OES11 server virtualized on VMware ESXi 5.5
The existing tree has two physical NW6.5SP8 servers running eDirectory
Version 8.7.3.10b (NDS Version 10554.64). One of the existing Netware
servers is used for DHCP/DNS, File Sharing from three NSS volumes and
Groupwise 7.0.4 whilst the second server is used for FTP services and
eDirectory redundancy. Ultimately the plan is to have two virtualized OES11
SP2 server with one for file sharing and the other for making the move from
GW7 to GW2012. And we're planning to stick with NSS for file sharing on the
new OES11 SP2 server.
I've come across a couple of posts for earlier versions of OES which
recommended not to put the Linux Native OS File System and NSS storage
pools/volumes on the same hard drive. Apparently the advice was a result of
needing to allow EVMS to manage the drive which could be problemmatic.
I've read the OES11 documentation which says that "The Enterprise Volume
Management System (EVMS) has been deprecated in SLES 11, and is also
deprecated in OES 11. Novell Linux Volume Manager (NLVM) replaces EVMS for
managing NetWare partitions under Novell Storage Services (NSS) pools."
So I'm wondering if there is still a compelling requirement to keep the
Linux Native File System and NSS pools/volumes on separate hard drives or
can they both now safely co-exist on the same drive without causing
headaches or gotchas for the future?
Neil

Hi Willem,
Many thanks for the further reply.
So we can just use the VMWare setup to "split" the one physical drive into
two virtual drives (one for the OS and the second for the pools).
And I've seen posts in other forums about the need for a decent battery
backed cache module for the P410i controller so I'll make sure we get one
(probably 512Mb module + battery).
Can I ask what is the advantage of configuring each VM's virtual disk to run
on it's own virtual SCSI adapter (by setting disk1 to scsi 0:0, disk2 to
scsi 1:0, and so on)?
Cheers,
Neil
>>> On 9/5/14 at 12:56, in message
<[email protected]>,
magic31<[email protected]> wrote:
> HI Niel,
>
> xyzl;2318555 Wrote: >
>> The new installation will run on a Proliant ML350 G6 with P410i>
> controller
>> so we can use the raid capability to create two different logical drives>
> as
>> suggested.
>
> As you will be using ESXi 5.5 as host OS, it's not needed to split
> thehost server storage into two logical drives... unless that's what
> youwant in perspective for "general performance" or redundancy reasons.
> Italso depends on the options that P410i controller has.
>
> On a side note, I'm not too familiar with the P410i controller... domake
> sure you have a decent battery backed cache module installed, asthat will
> greatly help with the disk performance bit.
> If the controller can handle it and the controller can handle it, go
> forraid 10 or raid 50. That might be too big a space penalty but will
> helpwith disk performance.
>
> Once you have your VMware server up and running, you can configure
> thetwo VM's with each two or more drives attached (on for the OS,
> thesecond or others for your pools).
> I usually create a virtual disk per pool+volume set (e.g. DATAPOOL
> &DATAVOLUME on one vm virtual disk, USERPOOL & USER volume on an other
> vmvirtual disk).
> With VMware you can than also configure each VM's virtual disk to run
> onit's own virtual SCSI adapter (bij setting disk1 to scsi 0:0, disk2
> toscsi 1:0, and so on).
>
>
> xyzl;2318555 Wrote: > Do you have any suggestions for the disk space that
> should be reserved> or
>> used for the Linux Native OS File System (/boot, /swap and LVM)?
>>
>
> Here's one thread that might be of interest (there are more
> throughoutthe SLES/OES
>
forums):https://forums.novell.com/showthread...rtitioning-%28
> moving-from-NW%29
>
> I still contently follow the method I choose for back in 2008, justwith
> a little bigger sizing which now is:
>
> On a virtual disk sized 39GB:
>
> primary partition 1: 500 MB /boot , fs type ext2
> primary partition 2: 12GB / (root), fs type ext3
> primary partition 3: 3 GB swap , type swap
>
> primary partition 4: LVM VG-SYSTEM (LVM partition type 8E), takes up
> therest of the disk **
> LVM volume (lv_var): 12 GB /var , fs type ext3
> LVM volume (lv_usr-install): 7GB /usr/install, fs type ext3
> * there's still a little space left in the LVM VG, in case var needs
> toquickly be enlarged
>
> One thing that's different in here vs what I used to do: I replaced
> the/tmp mountpoint with /usr/install
>
> In /usr/install, I place all relevant install files/IOS's
> andinstallation specifics (text files) for the server in question. Keeps
> itall in one neat place imo.
>
> Cheers,
> Willem-- Knowledge Partner (voluntary sysop)
> ---
> If you find a post helpful and are logged into the web interface,
> please show your appreciation and click on the star below it.
>
Thanks!---------------------------------------------------------------------
---magi
> c31's Profile: https://forums.novell.com/member.php?userid=2303View this
> thread: https://forums.novell.com/showthread.php?t=476852

Data source for application using both pooled and non pooled connections

Hi guys.
I am integrating Oracle's connection pooling into an existing application that had formerly used dbConnectionBroker. It looks like this task should be quite straightforward. However, for consistency, I would also like to replace other Connection logic within the application to use Oracle classes. This will involve using OracleDataSource to obtain a Connection object. ( without pooling ).
So in this case, the application will use both pooled and non pooled Oracle connections. They will be connecting to the same database. The question I have is in regard to the use of data-sources.xml.
Are there any special considerations for the required attribute values within data-sources.xml under this scenario ?
Help will be greatly appreciated.
Regards.
Steve.

Hi Steve -
It should be feasible for you to define a single datasource using multiple location entries to indicate what sort of pooling behaviour you wish to use.
If you lookup and use the "location" attribute, you will receive a javax.sql.DataSource object which will not provide connection pooling.
If you lookup and use the "ejb-location" attribute you will receive a DataSource object that will support connection pooling operations.
Note that this is using the emulated datasource approach, and transaction support is limited to a single resource (one database) for these datasources - you won't get 2PC support for transactions.
If you need a transaction to span two separate resources (ie two databases in same tx) then you will need to use the non-emulated datasource approach.
There is a chapter in the J2EE Services Guide which describes the datasource model we have with OC4J. This might provide you with some more useful information. See Chapter 11 - http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97690/ds3.htm#1004903
cheers
-steve-

VPN ASA inside Interface and ip pool are one same Subnet

Hi Everyone,
I have configured RA VPN full tunnel.
Inside interface of ASA is
Vlan1 inside 10.0.0.1 255.255.255.0 CONFIG
ip local pool 10-pool 10.0.0.51-10.0.0.100 mask 255.255.255.0
Need to know is it good design to have both on same subnet?
When i access the Switch connecting to VPN ASA inside interface via--https://10.0.0.2
which has IP 10.0.0.2 while using Remote VPN connection to ASA it does not work gives error
message as below
Jan 19 2014 19:42:46: %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.0.0.51/51077(LOCAL\ipsec-user) dst inside:10.0.0.2/443 denied due to NAT reverse path failure.
Jan 19 2014 19:42:57: %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.0.0.51/51078(LOCAL\ipsec-user) dst inside:10.0.0.2/443 denied due to NAT reverse path failure
Jan 19 2014 19:42:59: %ASA-6-302014: Teardown TCP connection 22418 for outside:10.0.0.51/51069(LOCAL\ipsec-user) to identity:10.0.0.1/443 duration 0:01:08 bytes 1035 TCP Reset-O (ipsec-user)
Jan 19 2014 19:42:59: %ASA-6-106015: Deny TCP (no connection) from 10.0.0.51/51069 to 10.0.0.1/443 flags FIN ACK on interface outside
Current NAT config is
nat (inside,outside) source dynamic any interface
Regards
MAhesh
Message was edited by: mahesh parmar

Hi Mahesh,
It should work but I generally would not suggest having the same network on the LAN and also configured partially as a VPN Pool network.
Your problem at the moment is simply lacking the NAT0 configuration for the traffic between LAN and VPN Pool.
I would suggest changing the VPN Pool first and then configuring this
object network LAN
subnet 10.0.0.0 255.255.255.0
object network VPN-POOL
subnet
nat (inside,outside) 1 source static LAN LAN destination static VPN-POOL VPN-POOL
We have to use the line number "1" in the above command so that it gets moved to the top since your current Dynamic PAT would otherwise override it.
In the future it would be best if you changed your current Dynamic PAT configuration to this
nat (inside,outside) after-auto source dynamic any interface
We simply add the "after-auto" to this Dynamic PAT configuration so that it gets moved down in priority. The "after-auto" refers to the fact that this NAT will be inserted after Auto NAT (after Section 2). Your current rule is Manual NAT (Sectiom 1). The new rule will be Manual NAT (Section 3)
- Jouni

WebUtil and JVM Pooling

Similar Messages

Maybe you are looking for