Weird ALSA Error on Laptop: "No state is present for card pcsp"

As you can see in the above image, I get this odd error when I boot up my laptop. I do not have this issue on my desktop which is also running Arch64. Anyone have any ideas? The laptop is a Compaq Presario F767NR.

Alsa is trying, and failing, to initialise your pc speaker. Blacklisting the snd_pcsp module will fix it.

Similar Messages

Tax statement item missing for tax code S1

Hi Guys
I am trying to release an invoice to accounting, and the above error comes up
"Tax statement item missing for tax code S1"
Message no. FF805
Diagnosis:
No tax item exists for tax code S1 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure:
Enter an OSS message
Please help.
Edited by: kofiyahya on Jun 14, 2009 7:10 PM

Hi kofiyahya,
Please Go thru the threads below,
Error : Tax statement item missing for tax code
FF805 Tax statement item missing for tax code
FF805 Tax statement item missing for tax code O0
Tax code error
Thanks,
Swamy H P

Error while generating remuneration statement

Hi
I found an error, while generating remuneration statement. The error is "Start date 01.01.1800 is higher than end date 00.00.0000".
Kindly help
Shadeesh

Hi shadeesh,
Please check the payroll control record's start date and end date in PA03
regards,
Ayyaps

Length error occured in IMPORT statement

Hello everyone,
i hv one requirment in PO print(ME23N). in po print asset no nt display without changing other format.
so that i first copy both smartform and driver program, in that i made certain changes such that i declare the patameter p_ebeln and i comment to data statement of p_ebeln & p_ebeln = nest-objky.
then i join asset no (anek-anln1) with the help of inner join. then in smartform i gave condition that if bsart = 'ZCAP'
wa_final-anln1 = gv_anln1.
endif.
i import gv_anln1 in smartform and exported in deriver program.
both are synthetically currect but when i gave print preview dump is occured.
length error occured in IMPORT statement
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "%GLOBAL_INIT" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
what i do?

Hello,
can u send me coding for that?
program line is already created for that
and their first coding is like that,
if gv_bsart = 'ZCAP'.
wa_final-matnr = space.
endif.
and in text they fetch matnr no.
but as per requirement they want asset no when bsart = 'ZCAP'
how that asset no will come.
matnr comes there is bsart is other that ZCAP, but bsart = ZCAP they want asset no instead of matnr.

Length error occurred in IMPORT statement.

Hi All,
           while exexuting a program i got dump saying that Length error occurred in IMPORT statement. through ST22 i came to know that both import and export structres are not same. Import structure is longer than the export structure.
         I tried in SDN but i coudnt find any solution. can you please suggest how to solve this.
Thanks in advance,
Sreekala.

Hi,
Maybe what you can do si....
Program X
data: v_var(20) type c.
export v_var.
Program Y
data: v_var(20) type c,
         v_var2(50) type c.
import v_var.
v_var2 = v_var.
Create a variable that is exactly the same with the exporting parameter, then just assign it to a local variable declared in the 2nd program.
Hope this helps.
Benedict

Error while replacing IF statements with DECODE function in procedure

Hi All,
I have created a procedure which has nested IF statements. Now I want to replace the IF statements with DECODE functions to improve performance.
Procedure:
IF (var_int_sev = '0')
THEN
var_sev := '2';
ELSE
SELECT sev
INTO var_int_sev
FROM errorconfig
WHERE errorcode = var_errorcode;
var_sev := var_int_sev;
END IF;
I converted the above IF statement into DECODE function as mentioned below:
var_Sev := DECODE(var_int_sev,0,2,SELECT severity FROM errorconfig WHERE errorcode=var_ErrorCode)
But it throws below error at the select statement used inside DECODE.
Error(58,51): PLS-00103: Encountered the symbol "SELECT" when expecting one of the following: ( - + case mod new not null others <an identifier> <a double-quoted delimited-identifier> <a bind variable> avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification> <a number> <a single-quoted SQL string> pipe <an alternatively-quoted string literal with character set specification> <an alternativ
Can someone help me in converting the IF to DECODE in the above case. Also how can we use a select statement inside decode.

instead of trying to rewrite all your code and hoping that the performance will be better, it's a better option to investigate and find out which part of your application is slow
read this:
When your query takes too long ...

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Error: unexpected XML reader state. expected: END but found: START:

I am getting following error while invoking method 'GetVersionInfo' (.net web service over dll) which takes one input parameter(string) and gives two output parameters(both short):
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: deserialization
error: unexpected XML reader state. expected: END but found: START:
{UPPLink}pnVersionMajor
ORA-06512: at "SYS.UTL_DBWS", line 388
ORA-06512: at "SYS.UTL_DBWS", line 385
ORA-06512: at line 40
Expected Request is as follows:
POST /UPPLink/UPPLink.asmx HTTP/1.1
Host: 172.16.1.38
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "UPPLink/GetVersionInfo"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<GetVersionInfo xmlns="UPPLink">
<ignore>string</ignore>
</GetVersionInfo>
</soap:Body>
</soap:Envelope>
EXpected Response is as follows:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<GetVersionInfoResponse xmlns="UPPLink">
<GetVersionInfoResult>
<pnVersionMajor>short</pnVersionMajor>
<pnVersionMinor>short</pnVersionMinor>
</GetVersionInfoResult>
</GetVersionInfoResponse>
</soap:Body>
</soap:Envelope>
The PL/SQL code I am using is as follows:
DECLARE
service_ sys.utl_dbws.SERVICE;
call_ sys.UTL_DBWS.call;
service_qname sys.utl_dbws.QNAME;
port_qname sys.utl_dbws.QNAME;
operation_qname sys.utl_dbws.QNAME;
string_type_qname sys.utl_dbws.QNAME;
number_type_qname sys.utl_dbws.QNAME;
retx ANYDATA;
strEntry VARCHAR2(100);
retx_string VARCHAR2(100);
majorVersion NUMBER;
minorVersion NUMBER;
params sys.utl_dbws.ANYDATA_LIST;
v_outputs sys.utl_dbws.anydata_list;
BEGIN
dbms_output.put_line('Starting Function');
service_qname := sys.utl_dbws.to_qname(null, 'UPPLink');
strEntry := 'vab';
dbms_output.put_line('Creating Service');
service_ := sys.utl_dbws.create_service(HTTPURITYPE('http://172.16.1.38/UPPLink/UPPLink.asmx?WSDL'), service_qname);
dbms_output.put_line('Creating Operation');
operation_qname := sys.utl_dbws.to_qname(null, 'GetVersionInfo');
dbms_output.put_line('Calling Service');
call_ := sys.utl_dbws.create_call(service_, null, operation_qname);
sys.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'true');
sys.utl_dbws.set_property(call_, 'SOAPACTION_URI', 'UPPLink/GetVersionInfo');
sys.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
string_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
number_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'short');
sys.utl_dbws.add_parameter(call_, 'ignore', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(call_, 'pnVersionMinor', number_type_qname, 'ParameterMode.OUT');
sys.utl_dbws.set_return_type(call_, number_type_qname);
params(0) := ANYDATA.convertvarchar2(strEntry);
dbms_output.put('Invoking with Input Parameter: ');
dbms_output.put_line(ANYDATA.ACCESSVARCHAR2(params(0)));
retx := sys.utl_dbws.invoke(call_, params);
dbms_output.put_line('Invoke complete');
majorVersion := retx.accessnumber;
dbms_output.put_line('Major Version ' || majorVersion);
v_outputs := SYS.utl_dbws.get_output_values(call_);
minorVersion := ANYDATA.AccessNumber(v_outputs(1));
dbms_output.put_line('Minor Version ' || minorVersion);
sys.utl_dbws.release_service(service_);
END;
/

Actually, the name needs to match what is specified in the WSDL file.

Tax statement item missing for tax code A0 - error while posting in MIRO

Hi,
At the time of MIRO, I am inserting P.O. and simulating the doc. However, at the time of posting the system is throwing the below mentioned error :
Tax statement item missing for tax code A0 (0% Input Tax)
Message no. FF805
Diagnosis
No tax item exists for tax code A0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message.
Request you to help me resolving this error
Thanks in advance
Sagar
Edited by: Sagar Padhye on Nov 5, 2009 11:30 AM

Hey K.R.
a) Are you able to post transaction through Accounts payable using the same tax code ? - YES
b) in Miro are you able to use any other tax code and post the document ?- NO
I have created other tax code and tried to use it in MIRO, but system throwing the same message. Is it somehow related to Tax procedure / OSS pack levels?The message Type is ERROR.
Please confirm.
Thanks and Regards
Sagar
Edited by: Sagar Padhye on Nov 5, 2009 3:51 PM

Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]

Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error : Tax statement item missing for tax code

Hello Gurus,
I have issue while releasing a billing document to accounting from VF02. The error says 'Tax statement item missing for tax code AA'
Any idea??
Prase

Dear Prasanth,
Please review note 112609 and 400766 carefully, which explain the
tax rules.
The FF805 error is most likely triggered due to configuration in
the pricing procedure.
If an active tax condition record is found (for example on UTXJ), even
though it is statistical, the tax code (linked to the record) is then
distributed to the active price conditions for that item pricing.
When it passes to FI, the active tax condition is passed but not
the price because an active price condition cannot be found.
In the SD-FI interface, for every price condition sent over,
there MUST be a tax condition sent over, hence the FF805.
I think may be what is happening in your case.
If after setting reference steps in your procedure according to the
guidelines in 112609, you still encounter the FF805, please let me know.
Hope this is helpful. Thank you.

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years .

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?

I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!!

Error: FF805 Tax statement item missing for tax code

Hi all,
We are getting an error when releasing billing document to accounting in 4.7system.
Error: FF805 Tax statement item missing for tax code O0
No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
parameters by the application to the Accounting interface.
Please give your inputs and will be rewared.
Quick reponse will be appreciated.
Thanks & Regards.

Dear Mehak,
I am sorry for the late reply, but I started (in fact) to work in SDN Forum this year, even I entered earlier.
We have many FF805 errors reported by customers and the same solution has resolved the problem. Please note that the SD-FI interface changed from earlier releases. The note 400766 eplxains the checks made.
So it is possible that now you get error message FF805, when in an earlier release you didn't get it, eventhough no customizing change.
Please review note -> 392696   R/3 Tax Interface Configuration Guide
However please note => In the vast majority of cases, error FF805 occurs because of an error in your pricing procedure. The attached note 112609 explains in detail how tax codes are transfered to conditions.
The note 400766 explains the checks performed by the system on the Tax codes:
1. system checks whether there is a revenue line for each tax line.
2. in the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the tax condition has condition value zero and condition base value zero, then it is not transferred to FI.
If you have revenue lines containing a tax indicator XX, but no tax line with tax indicator XX, then the error FF805 issues, and it is justified. => Please check these informations.
-> EXAMPLE
   If tax condition MWST has base amount zero and value zero; for this reason it is not passed to accounting. But, according to the criteria reported by note 112609, its tax indicator EG: A7
   has been assigned to the condition EG: ZBR1.
   So in accounting there would be a revenue line with tax indicator A7, but there isn't any tax line with indicator A7 (because MWST doesn't pass to FI). The note 400766 states situation is unallowed, and error FF805 is justified.
IMPORTANT: Just a hint, any issue with FI, kindly report in the forum:
Expert Forums - SAP Solutions - ERP Financials
There you will find a lot of people that works with FI and can help you with future issues, including me
I hope I could help you
Kind Regards,
Vanessa Barth.

Error: FF805 Tax statement item missing for tax code O0

Hi Gurus
We are working in Upgrade Project 4.6C to ECC 6
We are getting an error when releasing billing document to accounting in ECC 6 System.
    Error: FF805 Tax statement item missing for tax code O0
    No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
    parameters by the application to the Accounting interface.
This issue occurs in both DEV and QA2.
Please give your iputs and will be rewared
Thanks and Regards,
Sateesh.K

hi,
The problem may be due to missing authorizations.
Please looking into the note 780589 and 188200.
Hope this might be of some help.
Regards,
Imran

Weird ALSA Error on Laptop: "No state is present for card pcsp"

Similar Messages

Maybe you are looking for