Weird problem I am having.

My Ipod Nano was half full in memory. I have the 2Gb model, which is suppose to hold 500 songs. I added 6 songs and it took up 900 mb. I check the songs and they were only around 2000kb each. Now I can't add much more because of this. I do not know what to do? I only have about 14 mb left on my Ipod now.

Does this help?
http://discussions.apple.com/thread.jspa?threadID=122949&tstart=0
btabz

Similar Messages

  • Iphone 4, having a weird problem /: can't seem to fix it!

    So i have been having my iphone for a while, i have no warranty on the phone now. I have this weird problem that when i scoll down my messages and stuff i can see the outline of the message kind of show rainbowish colors that sort of show a bit when i scroll, right near the border of the message. its kind of annoying at times, also there are times when i press the home button, right when i get to my wallpaper, the outline of the letters when i text are there like very very faint, they disappear after for a while but then come back sort of like a glitch, and i cant fix it at all. then i would see faint horizontal lines, i would notice them when i use the camera, they disappear also. can anyone help me with this or suggest something?

    Screen lag is normaly the LCD itself. But try restoring the iPhone. http://support.apple.com/kb/HT1414

  • Problem of PI am having a weird problem in prinrinting List in Address Book

    I am having a weird problem in printing a list of addresses in Address Book. The odd number pages (1,3,5,etc.) print fine but the even number pages move the phone numbers from the third column and prints them over the second column's address and Note fields. Anybody know what is going on here? I have tried the Roll Call Directory software suggested by one respondent on another printing problem and while it is very nice, it seems to have its own quirks (Splits the information when it reaches the bottom left column of a two column set-up or prints at the top left column of the next page when it reaches the end of the right column instead of keeping the address intact in one spot).

    P.S. To as to this problem. I tried printing some more pages of the address list and now while some of the odd numbered pages seem OK as you go along it switches to some of the even numbered pages being OK with the odd numbered pages having the third column shifting to overprint on part of the 2nd column. In addition, I can't print envelopes since the program simply does nothing or crashes when the print button is selected.

  • I am having a real weird problem with OWB:

    I am having a real weird problem with OWB:
    I have 2 tables A and D
    select a.id,d.src_id, a.date_created,a.dt_code
    from A, D
    where a.id=d.mdoc_id
    The are my output :
    ID SRC_ID DATE_CREATED DT_CODE
    35 2 1/25/2008 302
    36 1 1/20/2008 301
    37 2 1/21/2008 301
    33 1 2/3/2008 302
    34 1 3/5/2008 302
    I want to see just 2 rows
    ID SRC_ID DATE_CREATED DT_CODE
    35 2 1/25/2008 302
    34 1 3/5/2008 302
    1. I need to 1 row with SRC_ID
    2. I want to retern max(dt_code)
    3. I want to order by max(dt_code), date_created
    I try do with PLSql but i get this answer :
    select a.id,d.src_id,a.dt_code, a.date_created
    from moi_documents a, document_src_candidates d
    where a.id=d.mdoc_id (+) and
    a.DT_CODE in (301,302) and dt_code =(select max(dt_code) from moi_documents)
    ORDER BY a.dt_code , a.date_created
    ID     SRC_ID     DT_CODE     DATE_CREATED
    35     2     302     1/25/2008
    33     1     302     2/3/2008
    34     1     302     3/5/2008
    I need to delete row 33
    How can i do this
    Regards

    Hi,
    okay...for Operations like max, min, avg, etc. you must use an Aggregation in a Mapping.
    Delete Operations you must handle in the Table Characteristics.
    (Right Click on top of a Table --> Context Menu --> choose delete).
    To come to your Target you must made several Steps in the Mapping and lead the Data through the Conditions.
    Lone

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • Weird problem with JApplet

    I'm having a weird problem with JApplet. So first I create an Applet with this code
    public class japp extends JApplet {
         public void init() {
              Container content=getContentPane();
              JButton jb=new JButton("Hello");
              content.add(jb);
    }and with this in the .html file;
    <html>
    <body>
    <APPLET CODE="japp.class" WIDTH="650" HEIGHT="500"></APPLET>
    </body>
    </html>
    And opened it in Firefox, it worked as expected. However, when I change the code in any way, i.e.
    public class japp extends JApplet {
         public void init() {
              Container content=getContentPane();
              JButton jb=new JButton("Goodbye");
              content.add(jb);
    }and compile it, it still shows the old button that displays "Hello". I've tried deleting the .class file from before and recompiling, that doesn't work. What am I doing wrong?
    Thanks.

    Reloading the page usually doesn't work. You will need to open the Java Console and clear classloader cache (x). You can also use appletviewer for testing purposes.

  • Weird problems with Leopard on iMac G5

    I've started having some weird problems—I think they may have started after running iDefrag, please no discussions about whether to defrag or not, but I'd done it before since upgrading to Leopard and nothing like this ever happened—sometimes while looking at a picture in Preview I'll click outside the frame onto the desktop, but it won't switch to the Finder, no matter how many times I click, also sometimes the computer will go to sleep *while I'm using it* (i.e. moving the mouse); I have set to put the display to sleep after five minutes of inactivity, and the computer never (I donate my CPU cycles).
    Also sometimes when I click on the Firefox icon in the Dock it appears as well in another section (so I have two FF icons at once)--I've been having some problems with FF and I think it's a bad profile but would this be related?
    All this started within the past week or so, but there wasn't a clear-cut before-and-after with the defragging (I did run OWC Media Scanner for the very first time, but it didn't find any errors, so presumably it didn't change anything), so I'm a little stumped. I ran Disk Utility and DiskWarrior, but the former didn't find anything and the latter only found a custom flag icon error.

    Check out the following links:
    http://support.apple.com/kb/TS1541 Mac OS X 10.5: Troubleshooting installation, startup, and login issues
    Mac OS X v10.5 Leopard Troubleshooting/Support
    Leopard Forums
    Keep calling Apple while you still its 90 days of free phone tech support.

  • Weird problems with battery

    Hi guys,
    I having some weird problems with my new battery. I changed the old battery (that died) for a brand new one. The first problem was: the mac didn't recognized the new battery in a macbook pro 13 early 2011. So, I putted the battery in a another macbook pro 13 mid 2010 and worked. So, I passed the battery again to macbook early 2011 and worked fine. I thought this very weird, but it is ok. The big problem came after: about two or three days of regular use, the mac just didn't turn on (I'm sure the battery charge was full). Even the battery charge button didn't work, like as the battery didn't stay there. However, if I shake the mac, something happen and the battery start to work normally. few minutes after (around 15 minutes), the mac shut down immediately, like as someone disconnect the battery from MB. If I shake the mac, the same thing happen again, few minutes after the mac turn off. The other strange fact is: if I open the mac, disconnect and reconnect the cable of battery (that connect with MB), the mac start work properly and 2 or 3 days after the problem go back.
    Anyone has a clue?
    I'm not confident about a bad contact problem of the cable with the MB, because the problem is repeated with some regularity of days (ever 2 or 3 days after connect the cable to MB).
    I guess could be a problem in the logic board of the battery... What do you think could be? If the problem is because the logic board, is there a solution?
    Thanks

    Call Apple and get them to take a look at it, you've done all the 'customer troubleshooting' you can ...

  • StarForce GF FX 5700: weird problem

    Since I bought this  geforce I used the 52.14 drivers from MSI. After having troubla with a game, I had to update my drivers. After installing the 56.72 ForceWare-drivres from nVidia, I had a  quite weird problem.
    After booting my PC, I started Battlefield Vietnam, and got this: The menu
    in-game (normally it's even worse)
    I tried a few other games, but they all had the same problem.
    I rebooted, restarted BF:V and everything was normal again.
    But, with those newer drivers, I had the same thing every day. If I worked in Windows too long, I had to reboot before I could play my games (descent).
    A few weeks later someone told me that the weird colors where caused by overheats.
    Down-clocking (starting from the standards, I never over-clocked the card) didn't solve my problem. Then I realized that everything worked perfect with the 52.14-drivers. I re-installed the drivers from the disc (52.14), and yes, my problem didn't exist any longer.
    The problem is gone (by using the 52.14), but I can't update my drivers, which is necessary to play certain games, without having to reboot to play.

    i put a post up about my problem with my fx5700 and bf1942 earlier, but no one has responded as of yet.  the 1st screen that was posted (all red) thats EXACTLY how my screen looks.  i've tried the drivers that came with the card (dont remember the version off the top of my head) and the latest drivers both showing the red screen.  did anyone come up with a resolution for this situation?

  • Weird Problem trying to sign into my App Store Account ?  Please Help !!

    Im having a very weird problem trying to sign into my App store account to update my apps and to purchase new Apps. Ive tried to search the net but I cant seem to solve my problem.
    Here is whats happening
    My Email address is correct in my iTunes Account and also my App Store account. (which is basically the same anyway)
    The problem I am having Is that when I try to download an App my old email address still shows up when it requests my password.
    The weird part is that my email address is correct in my itunes and also at the bottom of my app store. Yet my old email is showing up when I try to sign into the App store.
    Here are the steps Ive taken already to fix this problem and have failed.
    I have signed out of my itunes and app store and signed back in..FAILED.
    I went into my setting -STORE and signed out and back in..FAILED.
    I dont understand why my old email is still showing up when I try to sign in to update or download an App !!!!
    PLEASE HELP !!!

    I dont understand why my old email is still showing up when I try to sign in to update or download an App !!!!
    Apps are DRM protected & tied to the account that was used to originally purchase them. Were these apps purchased using your old account details?

  • Really weird problem -- won't download mail from one sender

    I'm having a really weird problem. Apple Mail won't retrieve mail from my Gmail account via POP3 from one sender only. All other mail is downloaded normally, except from a particular sender. What could be causing this? Thanks.

    I am trying to remember and research something about the Junk filter and Gmail accounts. Have you checked in your Junk mailbox, if Junk in enabled and there is a separate Junk mailbox?
    If you click on my name to the left, and look in the bio line of the resulting Profile, you will find an email address you can reach me with. If you email me at that address, I will send you a Gmail address that your sender can test sending a message to me at my Gmail account.
    Ernie

  • Weird Problem in QM stock posting from Quality Stock to Unrestricted

    Hi all,
    Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
    I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
    Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
    for this material and puts the stock in to Quality stock (I checked in MMBE).
    Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
    But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
    This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
    The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
    I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
    Sorry for the long post. How to correct this? Please help me!
    Thanks in advance,
    Vinodh

    I don't know why this happenned.  Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on.  That is usually greyed out and is set by having an inspection type activated.  You can't manually set that once an inspection type is added.  But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
    I would try to first clear all your inspection lots first.
    Then delete all the inspection types from the material.  And I mean actually go in and delete them. 
    Then use QA08 to reactivate the ones you need.
    Then see if this solves the problem.
    FF

  • Weird Problem in LiveCycle

    Hello All ,
    I am facing a weird problem in LiveCycle.In a form I did some script changes , saved it , and tested the form,it was ok. But After closing the form if I again reopens the form to do some script changes I am not able to find the script in any of the events. But then I tested the form , it worked perfectly. But if it's working then where are the scripts ?Has anybody faced this problem before ?
    Thanks,
    Bibhu.

    That's odd. We've identified a bug in 9.0, which causes LC Designer to arbitrarily wipe scripts. It usually happens after a few hours of intensive form constructing. A restart of LC Designer solves the problem temporarily. Other than that the bug is really hard to reproduce. We've discovered that if you launch Acrobat Pro before LC Designer (so that PDF Previews are viewed in Pro instead of Reader), the bug goes away.
    A guess would be that it is related to the way Designer rewrites the xdp (xml) tree, mixing nodes together. At least it's a viable conclusion considering Designer deletes the wrong node when deleting meta data (Form Properties->Variables->Minus symbol). There are also occasions on which, if you change the script of default buttons (the ones having tags like <?templateDesigner isPrintObject true?>), Designer wipes the entire script.

  • Comparing Strings...weird problem

    hello. I have kind of a weird problem going on here. I am attemping to write a java app that will read input from a file character by character and append each character to a String object, halt when it comes to either a whitespace (' '), a newline ('\n'), a tab ('\t'), or the end of the file (-1). Im basically just having the file read in one string at a time. Anywho, when ever i go to compare the string i read in from the file with another string in an if statement, it always comes up false, even when the values are exactly the same. Any ideas of what i might be doing wrong? Here's the code for u java gurus ;).
    import java.io.*;
    class UpdateHalls
    private static String myString;
    private static FileReader inFile;
    public static void main(String[] args)
    try
    inFile = new FileReader("test.txt");
    myString = new String();
    getString();
    System.out.println(myString);
    if (myString == "this")
    System.out.println("it worked");
    else
    System.out.println("nope");
    inFile.close();
    catch(IOException ex)
         System.out.println(ex);
    private static void getString()
    char myChar;
    String tempString = new String();
    try
    myChar = (char)inFile.read();
         while ((myChar != ' ') && (myChar != '\n') && (myChar != '\t') && ((int)myChar != -1))
         tempString = tempString + myChar;
         myChar = (char)inFile.read();
    catch(IOException ex)
    System.out.println(ex);
    myString = tempString;
    BTW, the very first word in the file is "this".
    Thanks a lot!

    Another method that you can use is String.compareTo(String)This method returns an int which is 0 only if the two strings are equal... for example
    String st1 = "this is a string";
    String st2 = "this is another string";
    //this won't return 0 because they aren't equal
    if(st1.compareTo(st2) == 0) System.out.println("They are equal")
    //this will return 0 because they are equal
    if(st1.compareTo("this is a string" == 0) System.out.println("They are equal");This isn't neater than .equals() , but it's another way when dealing with strings

  • Weird problem with Macbook Pro 15" and Asus PB278 monitor

    Hi there
    I recently bought a brand new MacBook pro 15" the one with a dedicated nvidia 750 vid card. However I'm facing weird problems while connecting it to a external monitor Asus PB278 (1440p monitor). I use a mini display port to display port cable.
    My problem is: Sometimes it works perfectly, but then if I put the laptop to sleep, sometimes it won't recognise the screen at wake up, at first I tried to restart the system, power on and off the monitor, connecting and reconnecting the cable... nothing worked. I even bought a expensier cable thinking it was probably a low quality cable. I found that then only way to fix this is to connect the monitor with a mini display to HDMI cable I have (won't support over 1080p), and then put the mini display to display port cable again... it is freaking bizarre.
    This is very frustrating, I live outside the US and while the retailer will honor the guarantee I'm not sure if this is a Software or Hardware problem, It will take them about 3 weeks to replace my system which is unfortunate due to I have plenty of work to do. I don't want to send it on guarantee just to find out hey... display recognition is broken again. My questions are:
    Is there a way to know if this is a hardware or software problem?
    I've heard Yosemite is having some issues regarding external displays, is this one of those?
    Have you found yourself experiencing this problem? Could you fix it?
    Sorry if my english is a bit weird, thanks in advance.

    Hi Gatobolo,
    Thank you for contributing to the Apple Support Communities.
    It appears that you've discovered unusual behavior with your MacBook Pro and an external display, where you need to temporarily connect a different display adapter before you can use your Asus PB278 again.
    I can offer some additional tips to help resolve or further isolate the issue you're seeing.
    First, try the following resets to see if they eliminate the behavior:
    You can reset the Mac's parameter RAM and SMC.
    Next, if the issue occurs again, try restarting your Mac into Safe Mode:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    You can find the steps above in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    If your display is recognized in Safe Mode, or after restarting again, the issue may be due to a software conflict.
    Another suggestion mentioned in the article above is to try a different type of display adapter, such as a Mini DisplayPort to Dual Link DVI adapter.
    If the issue persists, you can also back up your data, erase your hard drive, and reinstall a fresh copy of OS X Yosemite.
    OS X Yosemite: Erase and reinstall OS X
    If the issue still occurs after a clean install, troubleshooting the hardware may be necessary.
    Best Regards,
    Jeremy

Maybe you are looking for