What AP model to use for warehouse indoor / outdoor deployment?

Hi Guys,
What Cisco AP model (incl. antenna type as well) would you recommend to use for a warehouse indoor / outdoor deployment?
Requirements:
802.11n
indoor: full warehouse coverage
outdoor: 1 lane for forklifts around the building to be covered
Environment:
temp 0C - 50C
dust
I`m thinking of Cisco Aironet 1530 or Cisco Aironet 3700 w/ external antennas
Thx in advance,
A

What you can do is the comparison between the two devices.
Cisco Aironet 3700i
●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
●  Operating temperature: 32° to 104°F (0° to 40°C)
●  Operating humidity: 10% to 90% percent (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3700e/3700p
●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
●  Operating temperature: -4° to 122°F (-20° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 1530
Operating temperature: -30° to 65°C (-22° to 149°F) ambient; -30° to 55°C (-22° to 131°F) with solar loading (1200W/m2)
Storage temperature: -50° to 85°C (-58° to 185°F)
Operating altitude: 10,000 ft (3048 m)
Humidity: 0 - 100%, condensing
Wind resistance:
● Up to 100 mph sustained winds
● Up to 140 mph wind gusts
In the following URL you can find the further details for antennas as well
http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1530-series/data_sheet_c78-728356.html
www.cisco.com/c/en/us/products/collateral/wireless/3700-series-access-point/data_sheet_c78-729421.html
http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet09186a008008883b.html

Similar Messages

  • What is the plugin used for jsp/servlet development , deployment in eclipse

    what is the plugin used for jsp/servlet development , deployment in eclipse?
    can some body tell me what are the other plugins to be used in enterprise java developement
    is eclipse would be a best choice j2ee application development?
    thanks

    what is the plugin used for jsp/servlet development ,
    deployment in eclipse?There are several J2EE plugins I think. One is Lomboz.
    can some body tell me what are the other plugins to
    be used in enterprise java developementPfft...
    1) Might depend on what you're doing. J2EE is not just JSP, you know?
    2) Why do you ask about Eclipse IDE at Sun's Java Programming forum?
    3) Do you really want me to list the 5000 plug-ins someone might use for J2EE-related development?
    4) Open fucking Google and search yourself
    is eclipse would be a best choice j2ee application
    development?IMO: no. Simply because you have to look for J2EE plugins. I'm too lazy for that. Though it has other benefits that might outweigh the plug-in-searching issue.

  • What settings do I need to use for an indoor basketball game?

    What settings do I need to use for an indoor basketball game?

    Sit as close to the game as you can possibly be.  If you can sit on the ground on the sideline, do that.  If you are closer, you can use a shorter mm lens setting, so you can use a less expensive and/or wider aperture lens.  It can also mean a less-fast shutter to counter camera shake (though subject movement will still be an issue).  It will also mean you can crop the photo less, which improves IQ too.  It may also mean you can avoid the ugly part (the longest part) of a lens like the 70-300mm, and use the sweet spot instead.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • My Time Capsule won't allow my computer to back up.  It says it is already in use but that is what it is being used for.

    My Time Capsule won't allow my computer to back up.  It says it is already in use but that is what it is being used for. It has been working fine for years.  All of a sudden I keep getting a message that TC (time capsule) cannot complete back up as it is already in use.  I am doing the backups automatically through Time Capsule.

    Restart the Time Capsule by disconnecting and reconnecting the power adapter. When it's back online, open the AirPort Utility application and check to see whether there's a firmware update for it.

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
    One option is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/
    More options...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930

  • What format do I use for internal drive?

    I want to install a new internal harddrive into my Macbook.  What format should I use for it?
    Mac OS Extended (Journaled)
    Mac OS Extended
    Mac OS Extended (Case-sensitive, Journaled)
    Mac OS Extended (Case-sensitive)
    MS-DOS (FAT)
    ExFAT
    I know MS-DOS(FAT) is what I should use for external to work on mac and windows.  Can't remember which to use for the internal.  I have an Intel-based Mac.
    Thanks for your help.

    I use SuperDuper for cloning my OSX volumes and it does not change the size of the destination partition to the size of the source partition.
    So, you can make the destination partitions size to your liking and the cloning will not change it afterwards.
    Keep in mind that SuperDuper or Carbon Copy Cloner cannot clone a BootCamp Windows partition to a new harddisk, only OSX partitions.
    But Parallels doesn't need to have a Windows partitions but is mostly just two files plus the Parallels app on your OSX partition.
    And therefor it would be cloned with the rest of the OSX.
    Stefan

  • What setting should I use for Abbey Road drums?  Getting a cpu overload issue

    What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)?  Getting a cpu overload issue.  I have a macbook pro, 4 gb ram, running Logic Pro 9.  Just 3 tracks of drums and a few real instrument tracks.  Can't find a guide in the manual for either Kontakt or Logic.  Thanks in advance!

    Hi
    AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
    See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
    Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
    CCT

  • What is the method used for upload of  data

    Hi All,
    What is the method used for upload of  Data from excel spread sheets to SAP HR.
    it is Bulk Data from many countries.LSMW or BDC Session Method?
    what are country specific infotypes used for PA and OM.
    can u plz give the list of country specific infotypes used for PA n OM Module.
    Thanks
    Archana

    Hi Archana,
    To Upload bulk data I think BDC is the best and effecient way.
    Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
    I hope you had understood the point
    Regards
    Pavani
    Remainder: Points to be given on answers

  • What are the tables used for this Report

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.
    9994262112.

    hi
    good
    try with these tables,
    MARA
    KNA1
    thanks
    mrutyun^

  • What Metadata Standard is used for Face Regions?

    Nice to see that LR6 now has support for Face Recognition and Face Regions. However, nowhere in the online help is it stated explicitly what metadata standards are used for the image regions.
    I would hope that as Adobe is a member of the Metadata Working Group, then LR6 is using the metadata standard specified by the MWG for image regions.

    It's the MWG.
    Within Lightroom itself, the face regions are recorded inside the catalogue and this data is associated with keywords.
    When you export a photo, unchecking the option Remove Person Info, the names are also written to the IPTC Extension Person Shown and the MWG Regions too.
    I suggest you export a photo as above and examine its metadata in the Advanced tab of Bridge's FIle Info dialog box, or in some other metadata tool.

  • What data type is used for storing password,

    What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
    Thank you
    Hina

    Data type is VARCHAR2:
    SQL> desc dba_users;
    Name                                      Null?    Type
    USERNAME                                  NOT NULL VARCHAR2(30)
    USER_ID                                   NOT NULL NUMBER
    PASSWORD                                           VARCHAR2(30)
    ACCOUNT_STATUS                            NOT NULL VARCHAR2(32)
    LOCK_DATE                                          DATE
    EXPIRY_DATE                                        DATE
    DEFAULT_TABLESPACE                        NOT NULL VARCHAR2(30)
    TEMPORARY_TABLESPACE                      NOT NULL VARCHAR2(30)
    CREATED                                   NOT NULL DATE
    PROFILE                                   NOT NULL VARCHAR2(30)
    INITIAL_RSRC_CONSUMER_GROUP                        VARCHAR2(30)
    EXTERNAL_NAME                                      VARCHAR2(4000)
    PASSWORD_VERSIONS                                  VARCHAR2(8)
    EDITIONS_ENABLED                                   VARCHAR2(1)
    AUTHENTICATION_TYPE                                VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313.

  • In itunes, my ipod shows six gigabytes of "other" and i have no idea what that space is used for.

    In itunes, my ipod shows six gigabytes of "other" and i have no idea what that space is used for.

    Other usually contains app data and other miscellanious items. However 6GB is awfully big so it's likely been corrupted. I would restore.

  • What method should be used for resizing the particular JTable Column width

    I have a four table. Only one table which are on top have a table header. I want that when user resize the topmost table with a mouse other table colume also be resized automatically. So I want to know that what method should be used for resizing the particular JTable Column width.
    Thanks
    Lalit

    maybe you can implement a interface ComponentListener as well as ComponentAdapter with your topmost Table.
    for example:
    toptable.addComponentListener(
    new ComponentAdapter(){
    public void componentResized(ComponentEvent e){
    table1.setSize(....);
    table2.setSize(....);
    /*Optionally, you must also call function revalidate
    anywhere;*/
    );

Maybe you are looking for

  • Tfman - text file manager, much different then others

    Tfman - text file manager. Performs operations on files through textual representation of file system. Textual representation is in the form of plain text, editable with any text editor and may contain multiple operations of every kind. Tfman can be

  • Stop auto-capitalization after i.e. or e.g.

    anyone have an idea how to stop auto-capitalization after typing "i.e." or "e.g."? I would like to retain the auto-capitalization for starting sentences. Thanks!

  • SAP ECC 6.0 EhP 7

    Hi, We have installed an ECC 6.0 with ehp7 and updated it via SUM . We need to activate the utilities solution so for doing that we need to update the IS-U from 600 to 617 . Problem is that this component doesn't appear on the MOPZ, so we have tried

  • Inserting large amounts of data

    I am not sure if this is the best way of doing this but, I am trying to store icing data that we gather for general aviation purposes, in a spatial table in Oracle 8.1.7 The data set has about 10 altitude levels with about 10,000 points at each level

  • Acrobat Pro 9 - Flashes covered up info. How do I stop that?

    I'm trying to cover up information using the triangle tool in Acrobat Pro 9. Then I flatten the document. But when my doc is opened by me or anyone else, the info I covered up flashes for about a second, revealing confidential information. How do I k