What App will open a .pub file?

What App will open a .pub file? I tried ePub Reader and it doesn't work.

I'm not aware of anything on a Mac that will allow you to edit .pub files.
If you just need to view it, perhaps the person who sent it to you could save it as a PDF?
There are online tools that will do conversion as well, like zamzar.com. Not the best solution long-term but it may do the trick in a pinch.
But if you need to edit, I'm pretty sure you need a Windows PC with Office installed.
~Lyssa

Similar Messages

  • H.264 file - what app will open it?

    I've just encoded a file in H.264 / 1080p using Compressor and none of my apps will open it. Quicktime doesn't see it, and I've tried assigning other apps to it with no luck.
    The file in Finder has it listed as "exec". Can anybody help?

    Don't know why QT X won't open the the h.264. (I take it you using QT X.) Try Qt 7, It should be in your Utility folder. If Qt 7 isn't in the Utility folder you need to follow these direction on how to install Qt 7:
    http://support.apple.com/kb/ht3678#1
    Scroll to the top of the page for how to install Qt 7 onto Snow Leopard. To speed up the process you can download the Qt 7 installer for Snow Leopard from Apple's web site:
    http://support.apple.com/kb/DL923

  • Old TextEdit Document found from 1991 - what app will open this?

    I have been given an old disc (created 1991) by someone who created our family tree. It was done on a Mac using something called Mac Freehand, I believe. The document appears as a TextEdit document but when I open it on my new iMac, all I get is iPhoto opening automatically and it can't open the file. Viewing it in TextEdit just shows little symbols and some words and things and nothing else. What software can I use to view this - or is "Mac Freehand" still available somewhere?

    A ".sit" file is a compressed file. Large files are often compressed to make them smaller for transmission over the internet. The ".sit" suffix indicates that an application called Stuffit was used to compress the file. You need to obtain the free Stuffit Expander to expand it into something usable. The number ".1" at the end, by the way, indicates that you downloaded it twice, and the number was appended to the second copy.
    Stuffit expander may be found here: http://www.stuffit-expander.com/stuffit-mac.html
    The expanded file will be either a folder containing the Freehand application and read-me files with instructions or it will be a disk image (.dmg) file which will have to be opened, as well -- but without the need for any other software.
    Good luck.

  • TS1702 What app will support .pptx files?  I've tried FileApp Pro and no luck!  Dan

    What app will support .pptx files?  I've tried FileApp Pro and no luck!  Dan

    As do Keynote, Office2 HD and Documents To Go.
    Regards.

  • None of my apps will open - what have I done ?!

    None of my apps will open - what have I done !?

    Restart your iPad, press the home button and lock button for 10 seconds...
    Or delete your apps and download again

  • I am having issues with my iPad mini. My issue is sometimes my apps will open up without me touching them

    Hello everyone. I really need some help with my iPad mini. Lately it has been acting like it has a mind of its own, I could be reading a book in iBooks and the pages will start flipping on its own.  At times it will not allow me to post messages, as well as some of my apps, mainly my puzzle app will open up without me touching it. I really don't not know what is wrong with it. Can someone please help me

    Reset the iPad and see if that helps. Close all apps first.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't work, you should probably restore the iOS software. Instructions are in this kb article.
    http://support.apple.com/kb/ht1414
    If that fails, you are pretty much out of options and you should take your iPad to an Apple Store. They might be able to use their magic to restore the device for you, or if it is a hardware problem they will explain your options to you at that point.

  • None of my Cs4 Apps will open !!! ;-( help

    Hi,
    I need help big time ;-(
    None of my apps in cs4 will open. tey just bounce on the dock then close. No error message or anything.
    It was all working fine till about 2 days ago?
    About this Mac
    version 10.6.4
    i dont know what to do, i really dont know much about comps at all ;-/

    Hey,
    I deleted a folder from somewhere - i forgot where and i forgot where i found the answer - sorry. I think it was called the FLEX something Folder.
    I keep searching and let you know when i remember or find it again.
    cheers
    Mary
    Date: Sun, 20 Jun 2010 08:01:11 -0600
    From: [email protected]
    To: [email protected]
    Subject: None of my Cs4 Apps will open !!! ;-( help
    Aha...good going !  glad you got it working...
    What was the solution ?  It might help someone else someday if they have the same sort of problem you had...
    People do "searches" on the forum to find answers to problems...
    Good luck with everything....and now that you got it working dont hesitate to come for help with the program !
    Rod
    >

  • My iPhone 5s restarts while charging and none of my downloaded apps will open

    MMy iPhone 5s restarts every time I plug it in to charge. And none of my downloaded apps will open except for a few. I've restartedmy phone, deleted the apps then redownloaded them, ive reset my network settings, and even reset all of my settings in general. But nothing will work

    Hello d.ashley.,
    The troubleshooting steps detailed below can help stabilize your iPhone.
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Publisher 2013 won't open a .pub file

    Using Publisher 2013 from Office 365 Home Premium, I can't open some .pub file I had no problem opening the previous day. I get the message "Publisher has detected a problem in the file you are trying to open. To protect your computer, Publisher will
    not open the file." Suggestions?

    Type the following into Notepad and save  with the .reg file extension:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Publisher]
    "PromptForBadFiles"=dword:1

  • HT201210 my iphone 3gs is showing errors wen i turn on debug and some apps will open and then close.

    my iphone 3gs is showing errore wen i turn on debug and some apps will open and then close

    There's an apple store in my city but it is about a 20 minute drive and I do not have apple care. Do you think they would still help me?

  • Does anybody know why Illustrator will open Solidworks DWG files saved in R2007-2009 version but not version R2010?

    Does anybody know why Illustrator will open Solidworks DWG files saved in R2007-2009 version but not version R2010?

    Evidently Solidworks changed the output of their files to a format that AI cannot interpret. Just backsave in Solidworks to the required version.

  • What app will allow me to find my friends/family on androids with my iphone

    what app will allow me to find my friends/family on androids with my iphone

    I haven't used it myself but here is one you may want to evaluate: https://itunes.apple.com/us/app/gps-tracker-follow-other-phones/id466429552?mt=8

  • No apps will open in IOS 8.2

    Ever since updating to 8.2, not only am I having the same Store problems as everyone else, but none of my apps will open except for Safari. They just flash on briefly and then crash. Is anyone else having this problem?

    Somebody else who was having this problem explained to me why it's happening - because we've updated IOS and rebooted our devices, all the apps need to "check in" with the iTunes Store before they can run. Thanks to this outage (which is apparently due to a DNS error at Apple), that's not currently possible. So we're stuck without apps until Apple fixes their issues.

  • What app will allow me to play AVCH Lite vidio on a ipad

    what app will alow me to play AVCHD Lite vidios on an ipad

    captfred wrote:
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng
    Capt'n
    This morningI tried to use the above dongle with an HDMI cable to watch a Hulu show on my flat screen.  The picture was fine, but I didn't get any sound.  I have the latest MBA 11".  Instead, the sound continured to come from the MBA.  Any ideas why?

  • What software will convert a NCOR file to other video formats?

    Since Encore will only write to a disc, disc image, or Flash, what software will convert a NCOR file to other video formats?

    Now that I have more information, here's the issue in summary:
    A coworker is working on a training program for facilitators, total 3.5 hours long.
    Part of it includes a video, after which the viewer should be able to select one of several vignettes, smaller videos. At the conclusion of those, the viewer should be able to print a certificate.
    The coworker created a video in Adobe Premier, and then accompanying menus in Adobe Encore.  If we heard them right, the web developers said that the entire project (videos and menus) must be in MPEG-4, and we discovered that Encore can't do that. Encore could do it in Flash; the developers do not want that.
    I think what is going on here is a misunderstanding. It sounds like they want an interactive presentation. The video can be MPEG-4 from Premier. The Menu interactivity is something else, since MPEG-4 is not interactive. Flash is the only way I know of to keep the interactivity. Someone needs to ask the web developers what they are expecting.
    What do you guys suggest, besides a plain old HTML menu page with hyperlinked buttons on it?

Maybe you are looking for

  • Error-while  executing  Standard FM 'TEXT_CONVERT_XLS_TO_SAP'

    Hi Gurus, I'm using  Standard FM 'TEXT_CONVERT_XLS_TO_SAP'   , while  executing i got an Error " Error generating test Frame' Description: Error generating the test frame Message no. FL819 Diagnosis The system could not generate a syntactically corre

  • Upgrade from ICM 6 to 7 (TR) -- Domain conversion tool / UMT

    Hi, we are currently upgrading from 6 to 7.0 and subsequently to 7.5 (TR, new hardware, new domain, new instance).  So far we've staged our W2k3 domain and all the other soon to be ICM servers. I'm currently trying to migrate the domain users and it

  • Running Dos command in Java

    hey, Just wondering can anyone help me get started, i pretty new to java and wanted to run the date command in Dos from a java application. If i could just know where to begin or even if this is possible, it would be much appreciated!!

  • I have a problem with my suscription

    Hello, today I got an email telling me failed charging my credit card and that my service is back to being free. I checked my payment information and my card number is fine, I do not see is that saved my security number, which goes behind the card. T

  • Can labview do this? Project to Function pallette.

    Is there an easy way for labview to automatically add the current project right to a palette in LV 8.5.   It would be very nice to have the current project hierarchy avaliable in the functions pallete.  This saver having to navigate to the project wi