What are the client classes

hi all
i am new to EJB's. i am using weblogic6.0 . i am doing jar and deploying it. but my doubt is with the client program. why should i make the home and remote classes available to my client program(jsp page).
what all the classes we have to make available to client and why should we do this?
thanks
Paruchuri

HI,
The Client would need the Home and Remote classes.The Home is needed so that you can look up a remote object through JDNI javax.naming and through that you create a bean.Look more into the life cycle of a bean when the home's create() is called for more details.
The Home then returns to the client the Remote Reference to an EJB Object in the server. This is the Remote Stub which the client would then use to invoke the business methods on the bean. Since the client does not directly work on the bean by itself.
Hope this helps.
Nive

Similar Messages

What are the Client machine requirements for running Forms 6i?

What are the minimum/ideal hardware requirements of the client machines which run forms 6i in separate frames.
The reason for asking this is that the users have multiple sessions of separate Forms frames. When they do a lot of activity/transactions, and try to do a windows Print Screen on a MSWord file, nothing seems to print on the Word document. If they save the document and reboot the computer and open the same word document again then the screen print shows up. I am thinking it is because the separate frames take up lot of RAM. Typical configurations of our m/c are PII 400's with 64MB RAM.
Thanks in advance.

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

What are the client requirements to use BI OnDemand?

What are the requirements on the client side for using the bi.ondemand.com site. I would like to know what RAM amount is neccessary as well as the Operating System version.

The bi.ondemand.com product is a off premise cloud based computing platform. Being browser based, the only requirements is that you are using a browser at a version level higher than IE6. IE7, IE8, and Firefox are the supported browsers.
When opening bi.ondemand.com with an unsupported browser such as Opera, you may see a dialog box explaining that it is not supported, but you will find that there will not be any problems. Some browsers just have not been fully tested yet.
There is no real requirements concerning the amount of ram as long as there is enough to support the running of the browser.

What are the initial classes used for create DBAdapter in JDeveloper

I am trying to create a DBAdapter by JAVA program using JDeveloper API , So want to know initial classes name used to set the Adapter name and Service name in JDeveloper .

HI iansan5653
I am not sure if you are trying to make a widget/extension? for the browser or just customize the appearance of the user. I believe you have to create an appearance and then allow the user to download the appearance to change the styles.
I think you may want this webkit -moz-appearance[[https://developer.mozilla.org/en-US/docs/Web/CSS/-moz-appearance]]
I did some research on this and the MozillaZine is a great reference for all of the Preferences to add stuff to the panels.
Some more information
* [[http://kb.mozillazine.org/Category:Preferences|MozillaZine Category:Preferences]]
* This Menu editor may help [[https://addons.mozilla.org/en-US/firefox/addon/menu-editor/?src=search]]
* UserChrome.css info [[http://kb.mozillazine.org/index.php?title=UserChrome.css&printable=yes]]
* Visual Customizations [[http://kb.mozillazine.org/Category:Visual_customizations_%28Firefox%29]]
*topics [[http://forums.mozillazine.org/viewtopic.php?t=1006795]]
I have also seen extensions made by adding style to these items in the about:config. You could live update the items and see if the css makes changes live in the browser and see how the file renders. [[http://kb.mozillazine.org/About:config_entries#UI.]]
But for better help on this I would recommend asking the mdn
[[https://developer.mozilla.org/en-US/docs/Web/CSS/Reference/Mozilla_Extensions]]
If you can define your set up, the Mozilla Developer Network may be the place for you. Hope this helps.

What are the UserChrome classes/ids for the panel widget?

I am customizing my Firefox and it looks great, but I can't figure out how to customize the panel widget, like the one used in the downloads panel. I want to edit the widget browser-wide so that it can be compatible with addons that use that. I can't find an addon for this or the classes/ids that would work in the UserChrome.css file. I tried the DOM Inspector, but I couldn't figure out how to make that work.
I'm using Aurora 27.0a2 on Windows XP.

HI iansan5653
I am not sure if you are trying to make a widget/extension? for the browser or just customize the appearance of the user. I believe you have to create an appearance and then allow the user to download the appearance to change the styles.
I think you may want this webkit -moz-appearance[[https://developer.mozilla.org/en-US/docs/Web/CSS/-moz-appearance]]
I did some research on this and the MozillaZine is a great reference for all of the Preferences to add stuff to the panels.
Some more information
* [[http://kb.mozillazine.org/Category:Preferences|MozillaZine Category:Preferences]]
* This Menu editor may help [[https://addons.mozilla.org/en-US/firefox/addon/menu-editor/?src=search]]
* UserChrome.css info [[http://kb.mozillazine.org/index.php?title=UserChrome.css&printable=yes]]
* Visual Customizations [[http://kb.mozillazine.org/Category:Visual_customizations_%28Firefox%29]]
*topics [[http://forums.mozillazine.org/viewtopic.php?t=1006795]]
I have also seen extensions made by adding style to these items in the about:config. You could live update the items and see if the css makes changes live in the browser and see how the file renders. [[http://kb.mozillazine.org/About:config_entries#UI.]]
But for better help on this I would recommend asking the mdn
[[https://developer.mozilla.org/en-US/docs/Web/CSS/Reference/Mozilla_Extensions]]
If you can define your set up, the Mozilla Developer Network may be the place for you. Hope this helps.

In package /SAPAPO/MAT, what are the /SAPAPO/CL_PR_EEW* classes for?

General question:
In package /SAPAPO/MAT, what are the /SAPAPO/CL_PR_EEW* classes for?
Specific question:
Assume your client wants to add custom fields to the APO product master and display them on the standard screens displayed by the MATn transactions (e.g. MAT1)
Will the above EEW "enhancement classes" provide any way to customize the MATn screens (tabs, subscreens or even exits to pop custom screens)?
If not, then is there anyway to add custom fields to the MAT1 screens without doing a core mod?

Same question for XMDSER function group, particularly module
EXIT_SAPMMDUSER_001
(fires out of screen 100 initial master data maintenance)
I think this one will probably work, but it maybe a question of "timing", i.e. what customer action fires the PAI routines which ultimately fire the exit.
If a simple "ENTER" fires the exit, then we're fine.

What's the WMI class name to get Client Approval status

What's the WMI class name to get Client Approval status.
Unfortunately the below example with class "SMS_R_System" does not have the approval status
Get-WmiObject -Namespace "root\sms\site_LAB" -Class SMS_R_System | fl *
I listed all the available classes and... yeah It's going to take along time to go though all the possibilities.
Note: I'm running this in powershell on the primary first
If anyone knows it... I'd appreciate your help

This is all still in the testing phase so I'm not sure this is the best solution... but here's my problem and idea to resolve it.
Currently in our environment OSD can only be run against unknown computers and approved clients.
I currently automatically approve all clients in a trusted domain. So all systems that succeed OSD and auto join the domain are approved and I can always run OSD against those machines in the future.
Problem is with the systems that fail OSD for any reason and therefore do not automatically join the domain. They end up getting a SCCM record by the name of "Unknown" and therefore cannot run OSD again until the "Unknown" record
is deleted. "Unknown" records happen too frequently to manually delete and I'm not too comfortable with just deleting ALL of them on a scheduled basis.
Additionally there are way too many OU's in my environment to automatically join our OSD'd systems to the domain. So I have a script that checks using a prestart command to see if the system is already in AD, and if so then OSD continues and simply
joins the machine to the domain in it's current OU. If not the tech is given a nasty error message telling them to add the computer object in AD in the proper OU first.
I intend to check , with a Prestart Command if the current system already has a record in SCCM and delete it if found AND is not approved yet. This should resolve the "There are no task sequences available" error I get with
systems that have an "Unknown" SCCM record.
In this way the system will be essentially approved if the system was already prestaged in AD manually by a technician and any "unknown" record for that system will simply be deleted at the point of OSD.
Note: Although I can easily use the new SCCM Powershell cmdlettts and get the "Approved" status, I need to do all of this in WinPE without the cmdletts. If this property is not available via WMI, then I'm guessing this will not work.

What are the major components in class?

1)     What is the purpose of load-of-program? When it will be trigger?
2)     Write the code for displaying the three parameters in single line with the first parameter as mandatory in the selection screen?
3)     Which event triggered whenever the user call the function BACK, EXIT, CANCEL?
4)     What are the major components in class?
5)     What is the functional module is used to get popup screen for ALV reports?
6)     Which type of pool is used to get drop-down list?
7)     What is the tcode for creating the variant truncations?
8)     Is it possible to call LDBs number of times in same report?
9)     What are the conditions to use control break statements in our report program?
10)     What is the use of range statement?
11)     What is the difference between normal reports and alv reports? With comparing to normal report are there any disadvantages in alv reports?
12)     What are the components used to suppress the fields in the selection-screen?
13)     What is the standard program to transport selection screen variants?
14)     What is the event keyword for defining event block for reporting events?
15)     What is the specific statement use when writing a drill down report?
16)     What are the different tools to report data in sap?
17)     Write the menu path to create a selection text in reports?
18)     How do we omit the leading zero s while formatting outputs in reports?
19)     What are the report truncations?
20)     How do we align selection input in single row?
21)     How do we suppress the display of input fields on selection screen?

this forum is not for answering your interview questions...if you stucked with any realtime problem then post...please try to respect forum terms and conditions.
Thank you.

What are the possible approches for hosting a product(custom SP application) for multiple clients on a single SharePoint farm?

We have a product which is a custom application based on SharePoint Foundation 2010. Right now, for each of our client we create a dedicated server and host the application in the standalone deployment. Now, the requirement is to host multiple clients in a
farm deployment.
Challenges are: 1. The product has same name for the wsp that is deployed on different client servers as of now. How to distinguish for different clients on same farm
Currently the product specific css and jquery is in 14 hive. These files will be of difefrent versions for different client. How to segregate that?
How many web applications is recommend to be created in a single SPF 2010 farm? What are the challenges?
There are a couple of DBs created in SQL for the application. What is the best way to separate those for the client?
Essentially its the same product but with different versions for each client that we want to deploy in a single farm. What is the best practice to tackle this?

For the most part, these are not SharePoint questions per se, but product-specific questions you'd better ask the vendor about. To get in some more detail:
1. It totally depends on the scope of the solution. If its global, then you're out of luck and any changes you make affect all instances that use it. Better ask the vendor about it.
2. Not that many, let's say < 10, assuming you're web applications have separate application pools. Check out http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#WebApplication for
more info.
3. This is very application specific and really should be answered by the vendor. Not related to SharePoint at all.
4. Again, really depends on the product so better ask the vendor.
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

What are the uses of Void wrapper class?

Hi,
Similar to other Wrappers, Void is a wrapper class for the primitive ' void ' . We all know that Void is a final class , we can't instantiate it.
My Question is what are the uses of Void?
thanks,

kajbj wrote:
I have at times used it in reflection and jmx.I have used them with SwingWorker if I didn't have anything interesting to return. There is also an example in the tutorial: [http://java.sun.com/docs/books/tutorial/uiswing/concurrency/simple.html]

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

What are the classes used for bropdownListBox in BSP and purpose and how

what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar Shukla

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

What are the things we need to install on client desktop?

Hi all
I will need to install Peoplesoft Enterprise. However, for my part I will need to try to install it into serveral clients but connect it to a database. Which means that the main database is not in my com but in another com, is it possible that I can still install in my computer without a database and connect my com to the main com database? And I will also like to know what are the things I will need to install or configure into my computer which has no database. Such as do I need to configure PIA, WebLogic Server and etc. Can anyone please help me. I really need help and assistant in doing it.
Thanks

The database has been installed and configured with a given Peopletools version, say 8.52.x. You have to have the same version onto your local machine.
And since you want only third tier connection, no need to have any database client.
PIA is a server process to make front end users be able to connection onto the application using their own browser.
AppServer is a server process allowing people to connect in a 3tier mode, and which manage all the Peoplesoft thingy, exclusively to run on the server to make it available for all.
Batch Server, same as AppServer, exclusively on server side to make job process running out there. Not on any client.
Consequently, download the Peopletools (same version as the Peoplesoft database), configure the 3tier connectivity within the Configuration Manager and enjoy PSoft.
Nicolas.

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

DHCP Option 60: Go HERE.

What are the main differences between 3 three important class types

PP members
What are the main differences between class type 300(variants) , class type 200 (configurable objects) & 001 ( material class)
Please elucidate on the above
Thanks
Suren R

Hi,
The class type is a central concept in the classification system. The class type determines how classes are processed, and how objects can be classified and retrieved in these classes. In Customizing for Classification, you define the settings for a class type. You define class types for a specific object type, such as materials. You can then use classes of this class type to classify objects of this object type.
When you first create a class, you must enter a class type for the class. Each class type is a closed system. There is no link between the different class types.
he class type determines the following:
Which object types you can assign to a class
Which class maintenance functions you can process
Whether you can classify objects in more than one class
Which class statuses, organizational areas, and text types are supported in class maintenance functions
Whether you can use engineering change management for classification
Which filter functions you can use to restrict the search result
All materials can be classified with class type 001. Class type 300 is for variant configuration the variants under a class item are called as variants and can be picked during sales order creation. Class type 200 is for classes that are used as class items in bills of material. You can classify the same materials separately in these class types.
This is basically used to differentiate the BOM class items.
Prakash

What are the client classes

Similar Messages

Maybe you are looking for