What does blue text message mean?

My texts I send are always green...sent one just now & it was blue. Does that mean anything?

If the messages (and the Send button) are blue, you're chatting over iMessage with another iOS 5 user.
If they are green, you are using standard SMS text messaging.
Your device will automatically detect this and send whichever way is appropriate.

Similar Messages

HT3529 what does 2127 error message mean?

what does 2127 error message mean when trying to send a text??

"...usually the 2127 invalid destination indicates that you should check your number and try again. It could be if number sending to has text blocked, a network issue, or not sending to a full 10 digit phone number...if you are sending text to a contact in your phone make sure contact saved has all 10 digits with area code save and also in contact make sure saved as a mobile number and not a home number..."

What does this Bridge message mean?

I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
OLSException in OLS Adapter Startup
/OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
Should I be worried?
(I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
What does this Bridge message mean?

Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum.

What does the "text item" mean in SD?

what does the "text item" mean in SD?

Is that Item Text?
Please be clear in your questions.
As this is your first post you should have a look at the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
Also interview questions are not allowed here.
Regards
Karthik D

What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found: /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

What does this error message mean? disc recording not found

What does this error message mean? disc recording not found

Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

TS1846 What does this error message mean?

What does this error message mean? I am trying to burn a project to DVD...
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

The project is 1:22:30 - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

TS1702 0xE8000004-what does this error message mean?

0xE8000004-what does this error message mean? I get it when trying to sync my Garmin USA app.

See http://support.apple.com/kb/TS3221.

What does this error message mean? MFMessageErrorDomain error 1028.

What does this error message mean?
MFMessageErrorDomain error 1028.
I can't seem to delete a message from my mailbox. The above error message comes up every time and the message then reappears in my inbox.

Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
From the Mail menu bar, select
Mail > Preferences > Accounts > Advanced
From the menu labeled
Keep copies of messages for offline viewing
choose
Don't keep copies of any messages
Close the window and save the change. Relaunch Mail and test.

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

What does this error message mean? "An unexpected error occurred (error code -6584). It arises when I open my Time Capsule icon.

I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule. Thats when I learned that Time Capsule stopped backing up back in January. So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message. What does it mean and how can I fix the problem?

The backup is corrupted in some way.. you need to verify it.
The error is common enough but there seems to be a range of solutions.
Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
Look particularly for the posts by Pondini.
And check his troubleshooting for methods of doing things like verify.
http://pondini.org/TM/Troubleshooting.html
A5

What does this error message mean? "Systemflippers"

SystemFlippers: didn't consume all data for DLOG ID 2002 (pBase = 0x858200, p = 0x85828c, pEnd = 0x85870e)
I'm using old fashioned resources with DLOG and DITL, etc... but DLOG 2002 exists, so... I'm not sure what's up.
ETA: After re-saving the resource file n times it didn't help. Re-saving the n+1th time, made the error go away.
MAGIC!
I'd still like to know what it was if anyone knows, for the next time it comes up.
Message was edited by: Brian Postow

Please point me to anything that google got that gave the answer? My google-fu is weak but not THAT weak.
Ok, so "systemflippers" is a endianness thing in, where? the compiler? run-time? resource manager? and what does the error mean? Just knowing what systemflippers does (I sort of figured it was something like that) doesn't tell me what the error means.

What does this error message mean? (link to picture)

My MacBook has been not working very well this morning, so I did the verify disk thing and it returned the message that something was corrupt and I had to start up from the Mac OS X installation DVD and repair the disk. What does the message here mean?

OK, I'll try: it means that there's a missing directory record; that is, there's an item in the directory pointing to a record that doesn't exist. What else can I tell you? All such errors need repairing.

What does this popup message mean that I have been getting since the update

I got the update the other day and now when I open some of my projects this message pops up twice
"the previous selected audio interface is not available. Built in audio input and outputs of the computer will be used instead for this session".
What does this mean? How will it affect my project? or should I just ignore it. I am assuming this must be caused by the new update, since it did it the next day when I opened one of my projects. thanks

You could try to re-select your audio input and output settings under "Preferences > Audio" then save your song, quit and re-launch, and see if the message disappears. Maybe the update did something to your previous audio settings.
Hopefully this helps.
- Jay

What does these startup messages mean?

Hi, well today when starting up my box I noticed these two startup messages:
:: Initiate Random Seed
:: Removing LeftOver files
What does these mean? And what program/service runs it? (And what 'left over files' is it removing?) I think I never see them before. Is these message appears because I just install sudo?
Also when shutting down there is also a message concerning a Random Seed. (Saving Random Seed). What is it doing?
Last edited by zodmaner (2007-07-27 00:23:42)

zodmaner wrote:
Hi, well today when starting up my box I noticed these two startup messages:
:: Initiate Random Seed
:: Removing LeftOver files
What does these mean? And what program/service runs it? (And what 'left over files' is it removing?) I think I never see them before. Is these message appears because I just install sudo?
Also when shutting down there is also a message concerning a Random Seed. (Saving Random Seed). What is it doing?
Well... if your head over to your /etc/rc.sysinit, you'll see exactly what it does. If I remember correctly, saving random seed is just saving your startup time because it is random, and removing leftover files is clearing out the /tmp/ directory.

What does blue text message mean?

Similar Messages

Maybe you are looking for