What is a valid encoding for type byte?
Hi All,
I've created a webservice from a custom control which takes a byte[] as a parameter.
For this parameter, the generated jws file prompts for 2 pieces of input, the
first being the encoding type and the second the data (I assume?) No mater what
I use for encoding type (UTF-8, ASCII, Base64Binary) I get the following exception:
.bea.wlw.runtime.core.request.RequestValidationException: Unable to transform
query arguments to Java arguments
'UTF-8' is not a valid encoding for type byte
Caused by: com.bea.wlw.runtime.core.deserialize.DeserializerException: 'UTF-8'
is not a valid encoding for type byte
What is a valid encoding type to use for the Workshop generated test webservice?
Thanks for any help.
X
hmmm...I've asked one of the WLW gurus to take a look at your post,
however in the mean time I would highly recommend a conversation with
our support group.
Regards,
Bruce
BTW, I don't see 'sourceFile' or byte[] in the attached doc, only an
integer[]...
JTI wrote:
>
Yes, it is the web service test form.
For my method parameter 'sourceFile', which is defined as a byte[],
the generated test form asks for 2 pieces of input.
I'm assuming the first input is for the soap encoding, and the second
is for the actual data? What is the exact value I should enter in the
test form for these 2 inputs? I've tried xs:base64Binary , I've tried
just base64Binary, I've tried leaving the encoding input blank. It
works if I leave both inputs blank, but if I enter data into either input
field I get the following exception:
com.bea.wlw.runtime.core.request.RequestValidationException: Unable to transform
query arguments to Java arguments
'base64Binary' is not a valid encoding for type byte
Caused by: com.bea.wlw.runtime.core.deserialize.DeserializerException: 'base64Binary'
is not a valid encoding for type byte
... 29 more
at com.bea.wlw.runtime.jws.request.QueryRequest.resolveArgs(QueryRequest.java:148)
at com.bea.wlw.runtime.core.request.BaseRequest.validateArgs(BaseRequest.java:304)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:209)
at com.bea.wlw.runtime.core.bean.BaseContainerBean.invokeBase(BaseContainerBean.java:185)
at com.bea.wlw.runtime.core.bean.BMPContainerBean.invoke(BMPContainerBean.java:1530)
at com.bea.wlwgen.LibraryImplTestBMPContImpl.createLibraryItem(LibraryImplTestBMPContImpl.java:40)
at com.bea.wlwgen.PersistentContainer_cj0dw4_ELOImpl.createLibraryItem(PersistentContainer_cj0dw4_ELOImpl.java:99)
at com.bea.wlwgen.LibraryImplTestBMPContAdpt.invokeOnBean(LibraryImplTestBMPContAdpt.java:87)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.runAsInvoke(BaseDispatcherBean.java:160)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.invoke(BaseDispatcherBean.java:54)
at com.bea.wlw.runtime.core.bean.SyncDispatcherBean.invoke(SyncDispatcherBean.java:159)
at com.bea.wlw.runtime.core.bean.SyncDispatcher_k1mrl8_EOImpl.invoke(SyncDispatcher_k1mrl8_EOImpl.java:100)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.remoteDispatch(Dispatcher.java:134)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.dispatch(Dispatcher.java:46)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.exploreExec(HttpServerHelper.java:253)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executeGetRequest(HttpServerHelper.java:570)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doGet(HttpServer.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
at com.bea.wlw.runtime.core.deserialize.SimpleLiteral.getValue(SimpleLiteral.java:396)
at com.bea.wlw.runtime.core.deserialize.SimpleLiteral.toJava(SimpleLiteral.java:245)
at com.bea.wlw.runtime.core.binding.SerializeQuery.unmarshalQuery(SerializeQuery.java:109)
at com.bea.wlw.runtime.jws.request.QueryRequest.unmarshalArgs(QueryRequest.java:156)
at com.bea.wlw.runtime.jws.request.QueryRequest.resolveArgs(QueryRequest.java:143)
Attached is the generated html form.
Thanks for any help.
Bruce Stephens <[email protected]> wrote:
Hello,
I'm not sure what you are seeing; is this from the web service test
form? I'm going to guess that it is talking about soap encoding, so
for
byte[] it will correspond to the XML Schema xs:base64Binary [1]
Hope this helps,
Bruce
[1]
http://www.w3.org/TR/xmlschema-2/#base64Binary
JTI wrote:
Hi All,
I've created a webservice from a custom control which takes a byte[]as a parameter.
For this parameter, the generated jws file prompts for 2 pieces ofinput, the
first being the encoding type and the second the data (I assume?)No mater what
I use for encoding type (UTF-8, ASCII, Base64Binary) I get the followingexception:
.bea.wlw.runtime.core.request.RequestValidationException: Unable totransform
query arguments to Java arguments
'UTF-8' is not a valid encoding for type byte
Caused by: com.bea.wlw.runtime.core.deserialize.DeserializerException:'UTF-8'
is not a valid encoding for type byte
What is a valid encoding type to use for the Workshop generated testwebservice?
Thanks for any help.
X
Name: LibraryImplTest.html
LibraryImplTest.html Type: Hypertext Markup Language (text/html)
Encoding: base64
Similar Messages
-
I'm getting the following error
System.InvalidCastException: Operator '>=' is not defined for type 'Byte()' and type 'Integer'.
at Microsoft.VisualBasic.CompilerServices.Operators.InvokeObjectUserDefinedOperator(UserDefinedOperator Op, Object[] Arguments)
at Microsoft.VisualBasic.CompilerServices.Operators.InvokeUserDefinedOperator(UserDefinedOperator Op, Object[] Arguments)
at Microsoft.VisualBasic.CompilerServices.Operators.CompareObjectGreaterEqual(Object Left, Object Right, Boolean TextCompare)
at Customer_Fee_Calculator.Form1.GetCost2(Object dimension) in C:\Users\Chris\Documents\Visual Studio 2013\Projects\Customer Fee Calculator\Customer Fee Calculator\Form1.vb:line 259
at Customer_Fee_Calculator.Form1.CustomerSelect_SelectedIndexChanged(Object sender, EventArgs e) in C:\Users\Chris\Documents\Visual Studio 2013\Projects\Customer Fee Calculator\Customer Fee Calculator\Form1.vb:line 72
Dim inotes = rs1("INOTES").Value
(Line 72) If inotes.Length > 1 Then
cost = GetCost2(rs1("INOTES").Value)(0)
desc = GetCost2(rs1("INOTES").Value)(1)
Else
PkgType = CInt(rs1("PKGTYPE").Value)
cost = GetCost(PkgType)(0)
desc = GetCost(PkgType)(1)
End If
Function GetCost2(dimension)
Dim tempSql1, rs1
Dim MyResult As New ArrayList
Select Case dimension
(line 259) Case 1 To 24
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 13"
Case 25 To 43
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 14"
Case 44 To 71
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 16"
Case 72 To 120
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 17"
Case 121 To 499
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 18"
Case 500
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 19"
Case Else
tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 14"
End Select
rs1 = dbconnect(tempSql1, 1)
MyResult.Add(rs1("RETAIL1").Value)
MyResult.Add(rs1("DESCRIPTION").Value)
MyResult.Add(rs1("PRODUCTID").Value)
rs1 = Nothing
tempSql1 = Nothing
Return MyResult
End FunctionChris,
I'm not a database guy - so in many ways, I'm not really qualified to answer this, but I'll make a suggestion anyway:
At the very top of your code, put the following:
Option Strict On
Option Explicit On
Option Infer Off
With strict on and infer off, it will force you declare types - which I see missing in many places in the code.
It's entirely possible that by you then going through and fixing those issues, you'll have corrected the problem.
I don't know that, but it's possible -- and it should be done this way anyway, so there's certainly no harm to be done; in fact you'll actually speed up the program to a small degree because objects don't have to be inferred for the type that they actually
are.
***** EDIT *****
Also this: DON'T declare any of the types simply as "Object"; that's just trading off late binding for boxing, so you haven't really done much good. Declare them each as their correct actual type.
Still lost in code, just at a little higher level. -
What is a valid location for autorecovery files when using Word for MAC?
What is a valid location for autorecovery files when using Word for MAC?
Microsoft Word for Mac support forums is probably a better place to ask.
-
What determines the file encoding for
${C:file.txt} = 'abc'
I'm always getting ASCII as the encoding for file.txt after executing that assignment.Thanks so much. I'll keep looking for the MSFT doc on this. I scanned Bruce Payette's book and did not find anything there.
It turns out to be one of those "by rote" things you have to learn about PowerShell.
My concern about the lack of documentation is that MSFT might change the underlying code in the future to use Unicode and that might break some existing code. If there was some MSFT provided documentation declaring ASCII as the intended encoding they
might provide plenty of warning if they do a switch in encoding.
I note also that if you try to write characters outside the ASCII set (see example below) that character substitution happens to find an ASCII character to use in place of the one outside the ASCII set. In the example below a 'v' is substituted for
the '√' character:
${C:xo.txt} = '√' -
What would the syntax be for type "select"?
This onload function works great for type "text" - what would the syntax be for type "select"? or is there an example?
(Vikas' example pg 227)
window.onload=function () {
var text=document.getElementsByTagName('input');
for (var j=0;j<text.length;j++) {
var ip=text[j];
if (ip.type=="text") {
ip.onchange=function () {
var td=html_CascadeUpTill(this,'TD');
var tr=html_CascadeUpTill(this,'TR');
// Getting the value of the PK
var pk=tr.lastChild.getElementsByTagName('input')[1].value;
alert(pk);
var l_cellindex=td.cellIndex;
var l_column=g_headers[l_cellindex].id;
var app=html_GetElement('pFlowId').value;
var pg=html_GetElement('pFlowStepId').value;
var get=new htmldb_Get(null,app,'APPLICATION_PROCESS=session_auto_update',pg);
get.add('G_ITEM1',l_column);
get.add('G_ITEM2',this.value);
get.add('G_ITEM3',pk);
alert('column='+l_column+',value='+this.value+',pk='+pk);
gReturn=get.get();
if (gReturn) { alert(gReturn); this.focus();}
get=null;
</script>Here it is... Do I need any adjustments?
var selectlist=document.getElementsByTagName('select');
for (var k=0;k<selectlist.length;k++) {
var select_ip=selectlist[k];
//alert(select_ip.type);
if (select_ip.type=="select-one") {
//alert(select_ip.type);
select_ip.onchange=function () {
var td=html_CascadeUpTill(this,'TD');
var tr=html_CascadeUpTill(this,'TR');
// Getting the value of the PK
var pk=tr.lastChild.getElementsByTagName('input')[1].value;
//alert('PK='+pk);
var l_cellindex=td.cellIndex;
var l_column=g_headers[l_cellindex].id;
var app=html_GetElement('pFlowId').value;
var pg=html_GetElement('pFlowStepId').value;
var get=new htmldb_Get(null,app,'APPLICATION_PROCESS=session_auto_update',pg);
get.add('G_ITEM1',l_column);
get.add('G_ITEM2',this[this.selectedIndex].value);
get.add('G_ITEM3',pk);
//alert('COLUMN='+l_column+',VALUE='+ this[this.selectedIndex].value+',PK='+pk);
gReturn=get.get();
if (gReturn) { alert(gReturn); this.focus();}
get=null;
} -
What is the best encoder for a quicktime movie into iDVD...?
i seem to be having some issues with picture quality once the DVD is actually made... i do have my preferences set at professional quality, but i think my problem may be with the original source file... what's the best format for that...? H264...? mpeg4...? pro res...?
thanksSince you are just researching, I am going to make this as short and sweet as possible.
The 27 inch screen IMac is your only option. You need to have one with the fastest i7 CPU, fastest Graphics processor. Order one with the base 8 GBs of RAM and add additonal RAM through cheaper third party Mac RAM suppliers.
My preference is for the standard ATA 7200 rpm drives as the Fusion-type drives are not proven technology, yet.
If you want a really fast iMac and can afford it, consider an internal or external solid state drive (SSD) as these drives ard very,very fast.
For external drives fast drives are ones that use USB 3, Thunderbolt and/or FireWire 800 connections.
Stay away from external USB 2.0 external hard drives. They aren't fast enough.
You need an adapter adapter for your mini DV camera.
You are going to need some make of separate high speed audio interface box for instruments and vocals.
Look at interface boxes from M-Audio.
And you'll need to budget for a third party, good quality, high speed external FireWire 400/800 CD/DVD optical drive.
Plus, very seriously consider the purchase of extended 3-year AppleCare Warranty plan.
Something will go wrong with an iMac between 1-5 years.
Three years of warranty protection offers free repairs and replacement of you have hardware failures.
Good Hunting! -
What are the valid values for CPU in conditional disable structure config?
After diggin' around for some time (but to no avail)...
Does somebody know the valid values for the CPU (symbol) in the conditional disable structure configuration or where I can find this information?
Best regards,
HorstNot sure but you can try this:
http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/app_apptarget_cpu/
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
URLEncoder.encode() for double-byte characters
I use URLEncoder.encode(String s) and I know that this api is deprecated.
Instead I use URLEncoder.encode(String s, String enc) api and I pass-in a URL as the value for 1st parameter which is "http://regexp.tistory.com/entry/깨진-한글-URL-변환" and for the 2nd parameter I pass in "UTF-8".
But I believe that the double-byte characters in this URL is not encoded properly.Sorry but no.
Here's a link to what did go into RH6.
http://www.adobe.com/devnet/logged_in/mhu_rh_whatsnew.html -
XML encoding for type XML B/L transaction property
I need to change the XML encoding type from UTF-8 to UTF-16 for XML documents being sent to an external system via the web service action block. Is there any way to change this encoding in XMII?
Musarrat,
Of course it's possible....
Tim,
Instead of using the WebService action us the Post action and set the body of the post to be the WebService SOAP XML. Since the operation of a WebService and POST are the same thing behind the scenes this will work without a problem.
Hope this helps.
Sam -
What are the valid truststore usage types when importing a certificate?
I'm trying to import a certificate using the CertificateServiceClient. I use the string "truststore.usage.type.sign" as the usage string, but I'm getting this stack trace:
[exec] java.lang.IllegalArgumentException: Illegal Certificate Usage Type truststore.usage.type.sign
at com.adobe.truststore.businessobject.CertificateBO.setCertificateUseTypes(CertificateBO.ja va:160)
at com.adobe.truststore.businessobject.CertificateBO.<init>(CertificateBO.java:59)
What should I use instead? I want to add certificates so that I can validate digital signatures.The other value for importing Reader Extention certificate would be "truststore.usage.type.lcre". It depends upon the type of certificate being uploaded. Here is a related thread : http://forums.adobe.com/message/2257515
Thanks,
Wasil -
What is the new coding for types ??
I do when I change one of my programms a check to see if all coding is still valid
now I have
types: BEGIN OF ty_zcs_operatielijst_alv.
include structure zcs_operatielijst_alv.
types: cellcolors TYPE lvc_t_scol.
types: END OF ty_zcs_operatielijst_alv.
but the check says
The current ABAP command is obsolete
Within classes and interfaces, you can only use "TYPE" to refer to ABAP Dictionary
types, not "LIKE" or "STRUCTURE".
Internal Message Code: MESSAGE G/B
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
but when I change it to type it is also not good ??
and when I press F1 on types I don't get the message that include structure is obsolete coding in types ?
where can I found out how to code this correctly ?
kind regards
arthur>
Rich Heilman wrote:
> In the ABAP OO Context, you can not use the STRUCTURE. Instead use TYPE.
>
>
TYPES: BEGIN OF ty_zcs_operatielijst_alv.
> INCLUDE TYPE zcs_operatielijst_alv.
> TYPES: cellcolors TYPE lvc_t_scol.
> TYPES: END OF ty_zcs_operatielijst_alv.
>
>
> Regards,
> Rich Heilman
thanks, I only tried below coding and haven't thought of combining include with type
TYPES: BEGIN OF ty_zcs_operatielijst_alv.
TYPE zcs_operatielijst_alv.
TYPES: cellcolors TYPE lvc_t_scol.
TYPES: END OF ty_zcs_operatielijst_alv.
kind regards
arthur
Edited by: A. de Smidt on Mar 26, 2010 9:02 AM -
What are the valid 'sources' for Fin Reports 11.1.2?
Hi,
Have a client that wants to report using Fin Reports 11.1.2. He wants to connect to a Oracle Schema or SQL Server data warehouse and then connect to Essbase/Planning cube and also to the Planning relational tables to report on supporting detail etc. I don't think FR can connect to a relational source other than HFM and/or Planning Detail. Is that correct? Or can it connect to any Oracle/SQL server database and report off that too. I thought Interactive Reporting (Brio) is the tool for that.
Please advise.Hi,
Here is the whole list: http://download.oracle.com/docs/cd/E12825_01/epm.111/bpmui_user/database_manager_fr.html
Cheers,
Mehmet -
Utlfile:- What is Encoding format/type for UTLFILE.
Hello,
If i create file using UTLFILE then what will be the Encoding format/type (like ANSII, UTF-8,unicode).
Please reply soon.
Thanks in advancefrom documentation:
UTL_FILE expects that files opened by UTL_FILE.FOPEN in text mode are encoded in the database character set. It expects that files opened by UTL_FILE.FOPEN_NCHAR in text mode are encoded in the UTF8 character set. If an opened file is not encoded in the expected character set, the result of an attempt to read the file is indeterminate. When data encoded in one character set is read and Globalization Support is told (such as by means of NLS_LANG) that it is encoded in another character set, the result is indeterminate. If NLS_LANG is set, it should therefore be the same as the database character set..For more information:
http://docs.oracle.com/cd/E11882_01/appdev.112/e10577/u_file.htm -
I've tried unsuccessfully to find what names are valid html
for home pages,
"index", "default" etc. Is there a list somewhere?
RIGHT
Remove spam to email
http://righttax.orgHarvey:
Ask your host. It varies from one to the next.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Harvey Waxman" <[email protected]> wrote in
message
news:[email protected]..
> In article <giao4k$979$[email protected]>,
Dooza
> <[email protected]>
> wrote:
>
>> Dr. Harvey Waxman wrote:
>> > I've tried unsuccessfully to find what names
are valid html for home
>> > pages,
>> > "index", "default" etc. Is there a list
somewhere?
>>
>> Your default home page that is served up by your
webserver is set on
>> your webserver.
>>
>> Common ones are:
>>
>> index.htm
>> index.html
>> index.asp
>> index.php
>> default.htm
>> default.html
>> default.asp
>>
>> If your on an Apache webserver you can usually set
this using a
>> .htaccess file.
>>
>> Create one and add this line:
>>
>> DirectoryIndex index.html
>>
>> Then upload the .htaccess file to your server and
see what happens.
>>
>> If your on a Windows based server you control the
default page within
>> the IIS manager.
>>
>> If your stuck, ask your host.
>>
>> Dooza
>
>
> Not having any problems. I was just wondering what
browsers look for and
> I
> guess it is either index or default. Academic interest
only.
>
> Thanks
>
> --
> Harvey Products makers of Dinghy Dogs
> The Boater's Best Friend
>
http://www.dinghydogs.com
> Remove spam to email -
What are the different values available for type attribute
Hi,
I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
Thanks in Advance,
Murthy.Does this help
tring
Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
VARCHAR: Varying-length character strings.
CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
DBCLOB: Varying-length strings of double-byte characters in a large object.
|BINARY: A sequence of bytes that is not associated with a |code page.
|VARBINARY: Varying-length binary strings.
BLOB: Varying-length binary strings in a large object.
|XML: Varying-length string that is an internal representation |of XML.
Numeric
Data that contains digits. Numeric data types are listed below:
SMALLINT: for small integers.
|INTEGER: for large integers.
|BIGINT: for bigger values.
DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
|DECFLOAT: for decimal floating-point numbers.
REAL: for single-precision floating-point numbers.
DOUBLE: for double-precision floating-point numbers.
Datetime
Data values that represent dates, times, or timestamps. Datetime data types are listed below:
DATE: Dates with a three-part value that represents a year, month, and day.
TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
Regards
Ravi
Maybe you are looking for
-
What to look for in external HD
I'm about to buy a new external hard drive. I've always looked for an apple logo when buying this sort of stuff, but seriously, it's a stupid hard drive. I need a USB 2 port and power. If it is formatted different than I want then I can change it. Ti
-
I need to use OCX in peoplesoft. I want to know how to do it ? The peoplesoft is installed in Linux environment, can I call OCX ? What's the step to make calls to OCX ? Where the OCX file needs to be on the server? Thanks!
-
Library cannot be read created by a newer version of itunes
My itunes updates went haywire. So, I uninstalled itunes. Then read somewhere to also uninstall software update, mobile device support, bonjour, and application support. I did all, rebooted and reinstalled Itunes. Now I get a message that says Li
-
Starting j2ee server from a java Application
Hi. I'm trying to start j2ee server by clicking a button in an application I'm developing. I don't know how to do it. I haven't found In the documentation some topic related. I look at the j2ee.bat but it just call a class named J2EEServer, and the A
-
Erecruitment - Candidate search
Hi, We have a problem. Actually, in E-Recruitment -> candidate search -> when we search with employee first name or second name , it displays the user names with personal number and the mail ids (permanent employees). But one user , who has changed f