What is difference between adjusting columns these two ways?

Hi everyone,
In my last post I learned that I could create a new Master Page that is designed as a 1-column format and apply it to the body pages I want to have as 1-column. (I have a doc that has 2-column formatted L and R master pages; only 1 page at the very end, the Study Guide, needs to be 1-column formatted).
I recently learned from the Adobe lesson book that if I am in the body page that I want to change from a 2-col to a 1-column format, I can go Graphics>Object Properties and this brings up the Customize Text Frame window where I can change the number of columns to 1 and click set. I found this a lot easier than creating a new Master Page.
What is the difference between applying a one-column design to one page using each of these methods, applying a 1-column master page versus just changing the number of columns as described above? Is one wrong or better than the other?
Thank you for your help!!

There are 3 basic* ways of obtaining a custom layout for specific pages:
hack the local column layout
apply a new master Page as a local override:
Format > Page Layout > Master Page Usage > Use Master Page
map the new MP in semi-automatically:
Format > Page Layout > Apply Master Pages (AMP)
1 & 2 are not stable. Unless it's a disconnected flow, adding or deleting text prior to that page can cause your special-needs text to re-flow onto a page with normal Left/Right layout (and unexpected text flowing onto your special layout).
1 is also at risk from an update to the Left/Right MPs themselves.
3 requires that some paragraph on the special-needs page have a unique format name (say, "Heading2_Single"). After you perform your first AMP, an UnstructMasterPageMaps table is created on Reference Page MasterPageMaps. Add the special para name, and the special MP name to it. Thereafter, AMP will make sure that text gets the page it needs.
You can also perform an AMP during Update Book.
It is not reliable in FM 7.x. I don't know about later versions.
I always use technique #3, and perform a separate AMP as part of the pre-print workflow.
* You can also fake the layout in some cases, on the normal page layout, by putting the special needs flow in a table or text frame within an anchored Frame. Anchor to an Across-All-Columns format as needed. It wouldn't be Framemaker if there weren't at least 5 ways of getting the same result .

Similar Messages

Show differences between identical columns of two different tables

Hi,
I am trying to build an ADF UIX page that takes data from 2 tables. Both of these tables will have matching columns. The requirement is, I need to compare each of the columns within these tables and highlight the differences between the columns. For example, if table 1 has a column x with value 10 and table 2 has a column x with value 20, at runtime, I need to provide a text field for table 2's x column so that the user can change the value to match table 1 or enter a different value.
I need to do this using ADF UIX. Could anyone please help me in achieving this?
Thanks,
Ashok

hi
thw solution which you have given that is giving the
cartesian product of all the rows of the all the 3
tables.
1st table-7 rows
2nd table-7 rows
3rd table-7 rows
total rows in result table- 343 rows.
So its not working well..
thanks for ur response.What part of
You might also want a WHERE clause if the tables have more than one row in.did you have a problem with? You provided no information on which any of us could have written a join condition. I assumed you either had only the one row you showed us, or you were planning on coding the join yourself.

Whats the difference between these two queries ? - for tuning purpose

Whats the difference between these two queries ?
I have huge amount of data for each table. its takeing such a long time (>5-6hrs).
here whice one is fast / do we have any other option there apart from listed here....
QUERY 1:
SELECT --<< USING INDEX >>
      field1, field2, field3, sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end)
    FROM
      tab1 inner join tab2 on condition1 inner join tab3 on condition2 inner join tab4 on conditon3
    WHERE
     condition4..10 and
    GROUP BY
      field1, field2,field3
    HAVING
      sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end) <> 0;
QUERY 2:
   SELECT --<< USING INDEX >>
      field1, field2, field3, sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0))
    FROM
      tab1, tab2, tab3, tab4
    WHERE
     condition1 and
     condition2 and
     condition3 and
     condition4..10
    GROUP BY
      field1, field2,field3
    HAVING
      sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0)) <> 0;
[pre]

My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
Andre

Whats the difference between these two iphone 5 model "md635ll vs md639ll"?

i know theres alot of versions of iphone out there. I currently live in california, whats the difference between md635ll vs md639ll models?
I currently have the md639ll one.

My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
Andre

Whats the difference between these versions of photoshop?

First of all to make things clear I want to mention this first that I lives in Pakistan and Adobe doesn't support my region so in order to buy the Adobe Photoshop CC I have to contact the authorized resellers, after contacting them and asking for a invoice proposal for Adobe Photoshop CC, they send me several invoice proposals (per user team liscense). But I just got in a trouble as these proposals are offering Photoshop CC different versions so its like kinda making me double mind, i am just confused which to buy as prices are differ too and kinda noticeable. As for making my intentions clear I also wanna mention that I am looking for Single App Liscense i mean i just wanna buy Photoshop CC thats it. But for sure its not gonna be that photography version nor student one. Also i wanna know that whats the difference between these two versions and also tell me the pros and cons.
So please help me choose which one is better for me as I am really confused with it.
Here are the links
Note: You will have to translate these pages into english
Link one:
[65224660BA01A12] ราคาพิเศษ จำหน่าย Photoshop CC ALL Multiple Platforms Multi Asian Languages Licensing Subscription Mo…
Link two:
[65226001BA01A12] ราคาพิเศษ จำหน่าย Photoshop CC ALL Multiple Platforms Multi Asian Languages Licensing Subscription Mo…
I've attached screenshots too

The features in both of the Photoshop CC are identical, there is a difference in price because, the higher priced is the original Photoshop price, the less priced is the promotional priced Photoshop CC eligible only if you have CS3 or later version of Adobe creative suite product.
Hope this answers your question.
Regards
Rajshree

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Would you please summarize what the difference between tc and alv?

hi, experts,
would you please summarize what the difference between table control and alv base on the function and usage practice.
for example, as i know:
1.edit
tc: can edit in the same screen and save.
alv: pop up a sub screen to let user edit, so this is unconvenient.
2.functional button
alv: can have many functional button as default ,eg. sort, summary and so on
tc: developers must implements by himself.
3.color
alv: can have and change color
tc: cann't changed color
some client may required the data displayed in alv and edit in tc ,such as example BCALV_EDIT_02.
above are my idea, experts, would you give me some comments on my opinion and summarize what the difference between those two components? i should make it clear in order to consult the UI with my client.hunger for your advice, thanks!
Message was edited by:
liu shaochang

ALV Grid is basically used for display puropse. It is more user friendly. There are arious features ( such as coloring, sorting, saving to a local file, sedning by mail etc. ) These featurs make ALV Grid a very good option to display the data .
However , the table control is not only used to display data take from the database table, but also you can do operation such as deletion of data from database table, insertion of data into the database table and updation also. Yeah it has not got the various features whihc ALV has.
So table control and ALV Grid , if you are just using for display purpose, then ALV Grid is a better option due to its layout and attractive features. But if you want to do the database operations other than display, table control can be used.
As far as execution is concerned, I think ALV Grid is faster.
ALV grid control is faster when compared to Table control. But the comaprision is Negligible .
One of the major differences comes in taking of line items - ALV has an advantage over Table Control when it comes to update database from it.Table control only allows maximum of 999 records at a time where as this limitation is not there in ALV.
Also,a main feature of ALV Grid is that it contains a standard set of functions. These functions extend beyond the functions of a table control.
These two UI elements require different keyboard navigation, with ALV Grid being more user-friendly.
An application can display table data in ALV Grid or in a table control. In some applications you can choose between displaying and editing data in either ALV Grid or a table control. If a configurable button () appears in the right upper corner of the table, it is a table control.
Basically ALV is a way to display the output and Table Control is designed in screen painter through which you can get entries in Table Control, can delete some records etc for further processing and its not use only for Display.
ALV is Application List viewer:-
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
TABLE CONTROL:-
ABAP offers two mechanisms for displaying and using table data in a screen. These mechanisms are table controls and step loops. Table controls and step loops are types of screen tables you can add to a screen in the Screen Painter.

What is difference between MBEWH & MCHBH table?

hi guru's
what is difference between MBEWH & MCHBH table?
wat ever stock in these table are different?
i am doing support already i have two reports one is for Stock at PLANT level and one BATCH level . they used table for quantity MBEWH for PLANT level .and MCHBH for BATCH level wat ever displaying quantity is different in both reports ?
so please give me details description on these tables.
regards,
satheesh.

I think MBEWH table is refering to total valuated stock
MCHBH table is refering to valuated stock with unrestricted
Raghu

What is difference between modify and update i am using

hi
what is difference between mofify and update
my requiremen is to have three condition checkec while mofifying or updating from a internal table
the three fields are
cus no
status
date these all are primary key in the database table
so which sould i use modify or update
there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
pls suggest whihc to use and how to implement the check on teh threee primary key
like if modify ztable from table it_test
now where condition ? can be used or not with modify? and if yes how
if not should i use update will update create a new entry if no entry is there and please give syntex
regards
Arora

Hi Nishant Arora,
Modify: It works in performing two actions.
They are: Insert + Update.
For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
These are the cases you need to write these statements.
Syntaxes: :
Go through this links please.,
http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
Reward points if useful
Cheers,
Swamy Kunche
Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM

What is difference between enjoy transactions and Normal transactions

What is difference between enjoy transactions and Normal transactions
Ex:- ME22 & ME22N
What is difference between these two.

hi ,
the transaction code with 'N' are created with help of object concept.
In your case ME22 is obsolete one and ME22N is the tcode created with object concept.
pls Reward helpful points
Thanks
Siva

Getting Big Headache, What is difference between Flash Lite 3.1 and Flash Player 7

Hello, I am asking questions about the two similar yet different programs for Pocket PC version only:
1) Which came first, Flash Lite 3.1 or Flash Player 7?
2) If I have both in my Pocket PC, will there be product incompatibility?
3) What is the difference between Flash Lite 3.1 and Flash Player 7.
4) I have a Flash Lite 3.1 but uninstall information says "Flash Lite 3.1 for Opera Mobile", did you releaase this? Is this an illegal copy? A developer's copy?
*I don't know exactly where I got it, but I got it from the HTC developer's forum: XDA-developers.com
*I also use Opera mobile, a web browser for Pocket PC's.
5) What is difference between Flash Lite 3.1 and Flash Lite 3.1 for Opera? Is the only difference is that Flash Lite Supports everything flash related, while Flash Lite Opera supports only flash in opera?
Hi, I don't expect all answers, but I hope someone or someone from adobe support can clear some things up for me.

The program under my "remove programs" list is specifically called "Adobe Flash Lite for Opera". The XDA forums people said along time ago that it was Flash Lite, and kept calling it Flash Lite, and not Flash Player 7.
Now what about this:
http://www.adobe.com/products/flashlite/version/
The table shows the differences between FP 7 SDK, FL 2.1, and FL 3.1. And it's quite obvious that FL 3.1 has way more features than Flash Player 7. What does SDK mean? And why are you telling me FP 7 has more features?
With this information, can you or anyone else provide any more details and clarification?

Re: what is difference between sap locking and database locking

hi,
    what is difference between sap locking and database locking. Iam locked the table mara by using lock objects.
But iam unable to unlock the mara table. I give u the coding. Please check it.
REPORT zlock .
CALL FUNCTION 'ENQUEUE_EZTEST3'
EXPORTING
   MODE_MARA            = 'S'
   MANDT                = SY-MANDT
   MATNR                = 'SOU-1'.
call transaction 'MM02'.
CALL FUNCTION 'DEQUEUE_EZTEST3'
     EXPORTING
          mode_mara = 'E'
          mandt     = sy-mandt
          matnr     = 'SOU-1'.
IF sy-subrc = 0.
WRITE: 'IT IS unlocked'.
ENDIF.

Hi Paluri
Here is the difference between SAP locks and Database locks, i will try to find the solution to your code.
Regards
Ashish
Database Locks: The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
SAP Locks:
To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary.

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

What is difference between ESB Service and ESB Service Group

Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
Many Thanks
Deepak

The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

What is difference between User Exits and BAPI

hello sap gurus
what is difference between User Exits and BAPIs

http://www.sap-img.com/abap/what-is-user-exits.htm
www.****************
Where as this customer exits are again divided into:
1. Menu Exits.
2. Field Exits.
3. Screen Exits.
4. Function module exits.
These all the things comes under Enhancements.
User exits
1.A user exit is a three character code that instructs the system to access a program during system processing.SXX: S is for standard exits that are delivered by SAP.
XX represents the 2-digit exit number.UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
2.USER EXITS are FORMS and are called by SAP standard programs
using PERFORM.
3.Inside the form (user exit) you can read and change almost
any global data from host program.
4. User exits are more flexible because you have more information to use in your code but on the other hand , it is very easy to manipulate erroneously global data and lead the standard program to a dump or even to make database inconsistent.
5.While changing User-exit,Access Key is required,
BAPI is nothing function module but which is remote enabled, means you can access this fm through other SAP or non-SAP system by assingning to business object,which we can crea in SWO1 transaction.
more details see WWW.****************
reward if helpful

What is difference between adjusting columns these two ways?

Similar Messages

Maybe you are looking for