What is MS SQL DB host name and DB port number ?

i just installed HP quality center and ms sql 2008.Now hp quality center need to connect to my my ms sql database its asking me for database host name and data base port number.please help me out how can i find that.
Thanks

Click Start >> Run
For SQL Server 2005 Type "SQLServerManager.msc" and click OK
For SQL Server 2008 Type "SQLServerManager10.msc" and click OK
This will Open the SQL Server Configuration Manager for you.
Now in the Left Pane, expand "SQL Server Network Configuration" and click on "Protocols for <InstanceName>"
Now In the right pane, right-click on the "TCP/IP" protocol and go to properties - In the bottom there is TCP port - 1433(This is default) if your sql instance is other than default it will be dynamic port.
For host name RUN>>CMD>hostname>> this will provide host name of the server.

Similar Messages

Customizing server.name and server.port in services-config.xml

Hi
How can i find out what does BlazeDs use for server.name and server.port in
url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
can i customize those values?
thank you

Mete
Thank you for your reply
So context.root is resolved at compile time and server & port at runtime
Do you have an example or a link that shows / explain how to create custom tokens replaced by JVM options?
I have an issue where if i install my app on http://www.mydomain.com/mycontext/, it loads but will display the following message when making server call using Safari
FAULT: faultCode:Client.Error.MessageSend faultString:Send failed faultDetail:Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: http://www.mydomain.com/context/messagebroker/amf
Notte that it works on IE7 when accessing http://www.mydomain.com/mycontext/
and that it works great with all browsers on http://localhost:8080/mycontextroot
Would you know what is the best way to debug this issue?
Thank you
matt

Detect the proxy and the port number automatically

Hello,
Can someone provide me with an example how to detect the proxy host name and the port automatically?
Thanks in advance,

Hello,
If you create different desktop, phone and tablet sites in Muse, then they redirect automatically to the appropriate site when accessed from different devices, nothing needs to be done to make them redirect correctly.
Hope this helps.
Cheers
Parikshit

Replacing Host Name and Port number throughout Environments

So I am currently working on a project that have several classes using simple JDBC code. I'm switching all of it to use JNDI instead of what is currently being used. I'm using Weblogic and the plan is to have the code run in a cluster.
Here is a code Snippet of some of the code.
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://hostname:port");
My problem lies in the the "t3://hostname:port" String. I don't want to hardcode that since I know its bad code practice but my question is what is the best way to replace that with the Host Name and Port number as I move environments. Should I have a Class with a Static Variable and just reference that through the other classes or should I put it in some Property file and read the value from there? Any insight into this would be greatly appreciated.
Thank you.

would it be something like this?
Properties properties = new Properties();
          try {
     properties.load(new FileInputStream("src/jndi.properties"));
     String url = properties.getProperty("url");
     System.out.println(url );
     } catch (IOException e) {
     }

SMICM and WAS host name and port

Hi all,
Can someone please throw some light on the activity WAS host name and port in port... the question is:
Q. The information about host name and port is available in Tx SMICM, looking there in my case I find port 80xx whereas the portal runs on port 500xx. What value should we enter in the port field of "Connecting to a WAS system" in portal?
Is it what is given in SMICM or we should use 500xx?
Regards.

(80xx assuming you're starting Web Dynpro ABAP apps, integrated ITS and BSPs.)
Thanks Michael,
How about in case when it's not ABAP it's java apps i.e. when we are connecting BI to portal with SSO on dual stake. BI uses the 500xx port on FQDN and thus it's confusing me, whether to use 80xx or 500xx (when 500xx seems the port in use on BI portal).
Hope I made my point clear.
Regards.

ITS host name and port.

Hi Experts,
What is integrated ITS host name and port for portal services? Where can I find the ITS Parameters to create a SYSTEM in Portal?
Regards,
Amit.

Hi Amit,
GO to SMICM toce in R3 system and clcik on (F) servicess button , u will get ITS host path and port number .
GIve this details in System object ITS .
ITS host name : from SMICM
ITS path should be /sap/bc/gui/sap/its/webgui
Surekha.

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya

What's the difference between "Full Name" and "Account Name"

Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

Your computer name by default would be "John David Appleseed's Macbook Pro"
But you can always change that in System Preferences->Sharing
And yes, the first account you set up will be an administrator.

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Host name and ip address

Hi, i create a audit table , which save every action of the user on the client machines.,,,
i run this command on the SQLPLUSW Prompt, and it works well and return host name and ip adress ,,
select SYS_CONTEXT('USERENV','HOST') host,
SYS_CONTEXT('USERENV','IP_ADDRESS') ip_address from dual;
but when i write this command in the insert query it give me error that
bad behind variable SYS_CONTEXT
so tell me how i save the information through forms..
thanks for helping me

INSERT INTO AUDIT_DETAIL
ENTRY_NO ,
USER_NAME ,
ACTION ,
VOUCHER_NO ,
DATE ,
TIME ,
REMARKS,
DEPT ,
SCREEN ,
HOST ,
IP_ADDRESS
VALUES
ENTRY_NO,
USER_NAME ,
ACTION ,
VOUCHER_NO ,
DATE ,
TIME ,
REMARKS,
DEPT ,
SCREEN ,
SYS_CONTEXT('USERENV','HOST') , -- Here I want to save host name
SYS_CONTEXT('USERENV',IP_ADDRESS’) Here I want to save host name
)

How to get the Host name and port number

Hi all,
I am working in xRPM. I need to get the server name, host name & port number for the portal and i need to diaplay as a link in the Workflow step. I cant give the portal link as static, as it will vary depends on the DEV, QUAL, PROD. Is there any FM or class is available, so i can get the server name, port no. for my purpose?.
Regards,
Vinoth

Hi Kanagaraja,
My client has configured the portal and backend in different stack. So when i execute the FM you provided and with class: CL_HTTP_SERVER, CL_WD_UTILITIES, i am getting only the backend host name and port no. not the portal's info. So please help is there any way we can get the portal's info.
Thanks for your reply.
-Vinoth

Host Name and version.

All,
Applogize for posting non-oracle questions.
1.How to find out the host name and version of the OS on Linux and Solaris OS.
2. How to find out the free space on Solaris in terms of GBs.
Thanks

For question 1 on any UNIX system you should be able to use the uname command like in uname -n or uname -a
For question 2 do you mean memory or disk when you ask about free space?
Look up sar and df and du.
HTH -- Mark D Powell --

Getting host name and port number from application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Getting host name and port number from an application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Web AS Host Name and Path

Hi experts ,
Where to find the Web application server host name and its path defined in R/3 . Actually i am trying to create a backed SAP system for Portal. Is their any transaction to check the defined value for it.
- Rajesh

Hi Rajesh,
Actually Web AS Host name is <Servername>.<domain name>:<Port no>
Web AS Path for R/3 is </sap/bc/bsp/sapd>
Refer the following link.
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=402561">https://forums.sdn.sap.com/thread.jspa?threadID=402561</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=265076">https://www.sdn.sap.com/irj/sdn/thread?threadID=265076</a>
Regards
Hemalatha
/Assign points if helpful/

What is MS SQL DB host name and DB port number ?

Similar Messages

Maybe you are looking for