What is the best manual for imovie 10.0.6?

what is the best manual for imovie 10.0.6?

Hi asongbird,
It sounds like you are looking for a good resource to learn iMovie. I would suggest using the attached link as a resource.
iMovie Help
Have a great day,
Joe

Similar Messages

What is the best format for iMovie imports

Hi There,
I am trying to convert some home movies to iMovie on my mac the movies are on DVD in VLC> VTS files. What is the best file available on Xilisoft video converter Ultimate for best quality in iMovie please.
so many choices but none specifically for iMovie.
cheers

I don't seem to have DV or AIC as an option! Nor M-JPEG.
What is available depends on which converter you are trying to use. iSquint, for instance, will only convert to MPEG4/AAC or H.264/AAC. A converter like MPEG Streamclip, on the other hand, will convert to DV, AIC, M-JPEG, Photo-JPEG, MPEG-4, or H.264 but requires the $20 QT MPEG-2 Playback component to work on VOB files.
Also, although my VOB file is about 15mins, when I enter it in my converter it comes up as 2 seconds in the 'Duration' column. Why?
This is a common problem with MPEG-1/2 files. Usually it stems from timecode breaks. Such breaks are ignored by many non-Mac multi-media players but not by applications relying on the QT structure which synchronizes tracks "temporally" rather than spatially as with "multiplexed" GOP files or interleaved tracks. Once again, this is why I prefer MPEG Streamclip for converting such files. It includes a "fix timecode" option ("Command-F") to correct these breaks.

What are the best settings for iMovie to QT 7 so the majority can view?

My current iMovie saved out through version 7 is only viewable by those who have upgraded and frankly most people won't take the time and move on. Are there settings that will enable it to play with older versions before 7?
Can I convert it to WMP?
Thanks in advance'
-Ron
http://www.ronpitts.com
g5 Mac OS X (10.4.4)

Use the Final Cut Studio forum
http://discussions.apple.com/forum.jspa?forumID=939

What's the best photograph for a no background image?

I am about to photograph some products and would like to make a set up where I can photograph each of the products in the same setting/lighting. Then, when I go to open/edit them in PhotoshopCS4, I can take out the background and have just the image. Then, I can place that image ontop of any background I want. There is one bad thing. Some of these have a clear top where you can see thru them. Does or will that make a difference?
I want to set it up like they do for the weather on television, have a blue background and erase all of the blue showing. Then the only thing showing in the end is the digital background that was added in by computer and the weatherman(unless he's wearing a blue tie, in which case you can see the info through him). But my question still stands, what is the best setting for this and/or background color, how should the photographs be taken and then opened and edited(removing the background) using PhotoshopCS4?
We have a lighting set up, a 30" x 30" x 30" light tent setup, 3 lights with Pro Light Reflectors(one on the left, one on the right and one on top), 1 white and 1 black background and a box to place the images on. I'm using a Nikon D100.
Attached in a photo example.
This was taken with the black background and you can see the black through the bottle. I erased all of the surrounding black, but the dark shades still show on the sides.
Any help will be appreciated.
Sean

The whole point is that these photographs will be used for the book, manuals, magazines, ads... The backgrounds will not always be the same. That's my main problem. I am trying to figure out a way for the glass of the bottles to be "glass" images or "see through" so that when the photograph is placed on a background of, let's say, flowers, the flowers would show through. The edges of the glass are still solid and the flowers would not show thru them, but...
Is this type of thing possible for printing quality photographs?
Note - In the attched photo, it can be seen that the black background can be seen the plastic cap.

What is the best technique for resetting a view?

I was wondering what is the best technique for resetting the initial state of a view?
I am creating a form and want to provide a reset button for the user. I could write an initialize() method that my action handler calls, but I am wondering if the framework already provides this functionality in a more elegant way.
If I write an initialize method, then I have to manually populate my fields with my context mappings in my initialize() code to mimic what happens automatically by the framework the first time the view is called. This seems prone to error since this is duplicating the mapping logic.
Michael

Hi,
Even though it boils down to the same logic, for consistency sake it is good to have the initialization logic coded in the inbound plug method and then to call the outbound plug on reset.This make more sense when you have multiple navigation possible to the same view through multiple inbound plugs.
Else, have an initialization method.
PS: check whether the reset() method of IWDContext make sense. This is helpful when you have remove dynamically added nodes and attributes.
Thanks and Regards,
Sam Mathew

What is the best replacement for iDVD

I just bought a new iMac and found out that iDVD has vanished. What's the best approch for making slide shows from iPhoto and burning to a DVD?

Sorry, but I haven't found a way to burn a movie directly from iMovie since iMovie HD (6) (note: burn project to disk):
Whereas, there are no options to burn in the current iMovie version:
You can share it to online sites and you can export it, but you can't burn it.

What's the best solution for audio out of sound files from a MacBook Air to both an amplifier and to a subwoofer amplifier? I'm using the MBA to play sound files for worship services at our church.

I have a MacBook Air (13", 1.7GHz, 8GB RAM, 500GB SSD) that I'll be using to play sound files (primarily organ and piano) for worship services at my church. We'll be using a QSC RMX2450 650 Watts/Channel amplifier with Community CPL-27 speakers and also a JBL SUB 250P powered subwoofer with its own amplifier. What's the best option for getting sound out from the Mac to both of these amplifiers?

if you work with own recorded sounds you might wanna have a music program where you want to work with samples, steinberg has got very good ones (so they say)... but their really really ( ²) expensive(that's why almost no one haves them), magix haves good ones too bu their more for 'unprofessional' use, ableton haves really good ones too and they're not to difficult to use (if you know a bit of those programs you learn very quickly) and if you don't get them, there is a sort of manual built in it which explains and lets you do things to start (basics)
i hope this helped, btw stereo speakers are always better if you buy good ones (no pc speakers), but if you don't think you need them, don't buy them...
so again, i hope you have some ideas now

What is the best software for burning a large slideshow with 500 photos and music to DVD?

What is the best software for burning a large slideshow with 500 photos and music to DVD?

Are you talking about strictly burning an already put-together slideshow or composing one and then burning it?
My all time favorite slide show maker is Photo to Movie; you can then burn it from there or get it into iMovie and/or iDVD for the "finishing" touch. My favorite burn software is Toast, although you can use iMovie, iDVD, and Finder as well.
http://www.lqgraphics.com/software/phototomovie.php
http://www.roxio.com/enu/products/toast/titanium/

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

What are the best practies for naming symbols (spaces OK,etc.)?

What are the best practices for symbol naming for ease, flexibility, & to avoid "gatchas" down the road?
Does it make any difference if one includes spaces in the names of symbols? Are there any widely followed conventions for naming them like using camelCase or underscores?
Thanks!

Hi Gina D 3333,
Best-practice file-naming conventions for PDF files are the same as for any other file. I found this article on Apple's website that contains some useful pointers to consider when you're naming files that will be used on multiple platforms: OS X: Cross-platform filename best practices and conventions
I hope this helps!
Best,
Sara

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

What's the best approach for handeling about 1300 connections in Oracle.

What's the best approach for handling about 1300 connections in Oracle 9i/10g through a Java application?
1.Using separate schema s for various type users(We can store only relevant data with a particular schema. Then No. of records per table can be reduced by replicating tables but we have to maintain all data with a another schema Then we need update two schema s for a given session.Because we maintain separate scheama for a one user and another schema for all data and then there may be Updating problems)
OR
2. Using single schema for all users.
Note: All users may access the same tables and there may be lot of records than previous case.
What is the Best case.
Please give Your valuable ideas

It is a true but i want a solution from you all.I want you to tell me how to fix my friends car.

What is the best artical for understanding Data Pump

Hi,
What is the best artical for understanding the relationship / dependency of NETWORK_LINK with FLASHBACK_SCN or FLASHBACK_TIME .
Why it is manditory to have NETWORK_LINK , when we are using FLASHBACK_SCN or FLASHBACK_TIME.
Can some one explain the internal for that dependency
Thanks
Naveen

There's no direct dependency between NETWORK_LINK and FLASHBACK_SCN and FLASHBACK_TIME
As noted in this Oracle doc,
If the NETWORK_LINK parameter is specified, the SCN refers to the SCN of the source database
FLASHBACK_SCN and FLASHBACK_TIME are mutually exclusive.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#sthref120

What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

My final data table contains a two key columns unique key constraint. I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
(not unique) in the daily capture table). I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). Currently, what I do is to select * into a #temp table from the join
of daily capture and final data tables on these two key columns. Then I delete the rows in the daily capture table which match the #temp table. Then I insert the remaining rows from daily capture into the final data table.
Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table? How would this look?
What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
Rich P

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key. You need to fix this error. What ETL tool do you use?
>> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
MERGE statement; Google it. And do not use temp tables.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

What is the Best practice for ceramic industry?

Dear All;
i would like to ask two questions:
1- which manufacturing category (process or discrete) fit ceramic industry?
2- what is the Best practice for ceramic industry?
please note from the below link
[https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000409682008E ]
i recognized that ceramic industry is under category called building material which in turn under mill product and mining
but there is no best practices for building material or even mill product and only fabricated meta and mining best practices is available.
thanks in advance

Hi,
I understand that you refer to production of ceramic tiles. The solution for PP was process, with these setps: raw materials preparation (glazes and frits), dry pressing (I don't know extrusion process), glazing, firing (single fire), sorting and packing. In Spain, usually are All-in-one solutions (R/3 o ECC solutions). Perhaps the production of decors have fast firing and additional processes.
In my opinion, the curiosity is in batch determination in SD, that you must determine in sales order because builders want that the order will be homogeneus in tone and caliber, and he/she can split the order in diferents deliveries. You must think that batch is tone (diferents colours in firing and so on) and in caliber.
I hope this helps you
Regards,
Eduardo

What is the best manual for imovie 10.0.6?

Similar Messages

Maybe you are looking for