What is the difference between "create set" and "create dynamic set"?

What is the difference between  "create set" and "create dynamic set"?
we have a complete cube ready for production that was tested and working without any issues in non-r2. we found that some "create set" assignments don't work in R2. But when changed to from  "create set" to "create dynamic set"?
they are working, However, not sure how it will impact other areas of the cube.

Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
could you try to use dynamic set or create statics set but with fixed member for example:
CREATE 
SET CURRENTCUBE.[Prior Month] AS
[Date].[Date Key].&[20050723].PrevMember
, DISPLAY_FOLDER = 'Relative Period Sets';
Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
on below official link to get confirmation from Product Group:
 https://connect.microsoft.com/SQLServer/
Thanks,
Raymond
Raymond Li - MSFT

Similar Messages

  • What's the difference between splitting events and creating an event?

    With photos selected in an event, "splitting" the event and "creating a new event" appear to do the same thing. Is there any difference? In either case, a new event is created with the selected photos taken out of the original event.
    doug

    Doug:
    Auto split will split up the event into events based on the date requirement that's been set for events, i.e. 1 day per ever, 1 week ,etc. It's automatic. Whereas creating a new event you determine which photos go into that event.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • What is the difference between quarterly patches and patch sets

    Hello,
    What is the difference between quarterly patches and patch sets?
    Should we always apply the latest quarterly pathches?
    Is it better to apply to the latest patch set if one can afford?

    The quarterly patch sets are generally security fixes, or Critical Patch Updates (CPU). Oracle strongly recommends that the CPU patches are applied. CPU and quarterly patches do not change the release/version of the database.
    The patch sets contain bug fixes and do change the release/version of the database.
    As with all patches you should test them on a test database before deploying in production. If you have vendor supported applications you should contact your vendor before applying any patchsets.

  • What's the difference between "Full Name" and "Account Name"

    Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

    Your computer name by default would be "John David Appleseed's Macbook Pro"
    But you can always change that in System Preferences->Sharing
    And yes, the first account you set up will be an administrator.

  • What is the Difference Between Sys Date and Effective Date ??

    Hi Gurus,
    Can any one pls let me know What is the Difference Between Sys Date and Effective Date ??
    with regards
    User600722

    EFFECTIVE DATE usually refers to a date-tracked record (although not exclusively).
    Date-tracked records in Oracle HR have an EFFECTIVE START DATE and an EFFECTIVE END DATE. The record is 'EFFECTIVE' between these dates. In reports, you often use SYSDATE to compare to these two dates to find the CURRENT effective record, e.g. SYSDATE BETWEEN EFFECTIVE START DATE AND EFFECTIVE END DATE.
    When you make changes to a HR record, you can choose between DATE TRACKING options, such as CORRECT or UPDATE (there are others too). CORRECT will overwrite the record and replace the data with your changes. This is normally used when you need to correct something that is wrong. UPDATE will create a new version of the record from the EFFECTIVE START DATE you choose. It will also set the EFFECTIVE END DATE of the previous record to the day before your new record's EFFECTIVE START DATE. That enables a history of records to be maintained so you can see what your data looked like at ay one point in time.
    Regards
    Tim
    Edited by: TimW on Sep 23, 2008 2:37 PM

  • What is the difference between full checkpoint and incremental checkpoint?

    What is the difference between full checkpoint and incremental checkpoint?
    And what is checkpoint queue?
    Can someone clarify these concepts?
    Thanks!

    Hi,
    there are different types of checkpoints:
    - Full checkpoint:
    => DBWR writes all dirty buffers from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
    -- can be triggered by different events, like a logswitch, a manual checkpoint (alter system ..), a shutdown and so on
    This is the setup point for SMON for a crash recovery.
    - Partial checkpoint:
    => DBWR writes all dirty buffers of a singel tablespace from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
    -- can e triggered by an ALTER TABLESPACE OFFLINE, ALTER TABLESPACE READ ONLY, ALTER TABLESPACE BEGIN BACKUP statement.
    Incremental checkpoint:
    number to all file headers and the controlfile.
    -- can be triggered by different events, like a logswitch, a manual checkpoint (alter system ..), a shutdown and so on
    - Partial checkpoint:
    => DBWR writes all dirty buffers of a single tablespace from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
    -- frequency is determined by FAST_START_MTTR_TARGET parameter (new feature to Oracle 9i), with wich you can specify a time in seconds which SMON is allowed to take maximal for a Crash Recovery until the database must be open again.
    Dapending on the system you have SMON must calculate the maximum number of Redolog-blocks which it can manage to recover in the specified number of seconds. It will then create so called incremental checkpoints which will be tracked in the so called checkpoint queue in memory.
    FAST_START_MTTR_TARGET is auto-tuned in Oracle 10g and Oracle tries to manage (incremental) checkpoint in a fashion that a minimum of I/Os are caused and a minimum time for crash recovery is needed.
    If you set LOG_CHECKPOINTS_TO_ALERT to TRUE you will find checkpoint information in the alertSID.log file. You will see FULL and INCREMENTAL checkpoints then.
    Hope this clarifies your question,
    Lutz Hartmann

  • What is the difference between customer exits and user exits?

    hello friends,
    what is the difference between customer exits and user exits?

    Hi
    User exit - A user exit is a three character code that instructs the system to access a program during system processing.
    SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
    UXX: U is for user exits that are defined by the user.  XX represents the 2-digit exit number
    Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.     *-- Mani
    The following document is about exits in SAP :-
    The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. 
    SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
    Types of Exits 
    There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
    Menu Exits
    Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
    SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu item’s text when activating the item in an add-on project.
    Screen Exits
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    Function Module Exits 
    Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. 
    When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated. 
    Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. 
    These calls have the following syntax: 
    CALL CUSTOMER-FUNCTION ‘001’.
    Field Exits
    Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field.  Example: The data element BBBNR identifies a company’s international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100. 
    The field exit concept lets you create a special function module that contains this logic. 
    You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number. 
    In 4.6c, you can use "RSMODPRF" program to create field exits.
    An example of a user exits :-
    MODULE user_exit_0001 INPUT 
        CASE okcode.
            WHEN 'BACK OR EXIT'.
                CASE sy-dynnr.
                        WHEN '100'.
                             SET SCREEN 0.
                             LEAVE SCREEN.
                        WHEN '200'.
                             SET SCREEN 100.
                             LEAVE SCREEN.
                 ENDCASE.
          ENDCASE.

  • What is the difference between "Group Albums" and "Albums"

    What is the difference between "Group Albums" and "Albums"

    An album is a shareable object; you can add photos to an album, then subsequently share that album with someone else. It's better than sharing your whole library, and allows you to make and share lots of different related sets of photos.
    Group Albums allow you to collaborate on an album with others. Both you and the collaborators can upload photos or videos, and view them in My Library. All members of the Group Album can also edit, copy, print, and download the items in the album.
    Only members of Photoshop.com can participate in Group Albums. But since membership is free, you can invite nonmembers to participate in a Group Album, and they can create a Photoshop.com account and contribute files.
    -Mark

  • What is the difference between Topic Keywords and Index File Keywords?

    What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
    RH9.0.2.271
    I'm using Webhelp

    Hi there
    When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
    Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
    As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
    <meta name="MS-HKWD" content="BOFFO" />
    When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
    Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
    Hopefully this helps... Rick

  • What is the difference between Video-out and mirroring?

    What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
    I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
    I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
    Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
    There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
    I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
    So far not doing very well.

    Now found these but have had to give up on this adapter!
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    http://support.apple.com/kb/HT4108

  • What is the difference between jsp :include and server side include

    what is the difference between jsp :include and server side include(request dispatcher include method)????
    i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
    Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
    do suggest if u hav ny other diff in this context...

    The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
    If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
    Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
    - Saish

  • What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

    Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

    Any call made from the API will automatically be set to the “Session Timeout” period, no matter
    what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
    Short Session Timeout and Session Timeout in Excel Services
    Short Session Timeout and Session Timeout in Excel Services - Part 2
    Sessions and session time-outs in Excel Services
    above links are from old version but still applies to all.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • What's the difference between EQ off and flat?

    What is the difference between EQ off and flat? Are all the frequency's at the same place as if it were flat?

    OFF uses iTunes EQ settings, if any.
    FLAT overrides iTunes EQ settings, if any
    Close.
    In Flat, if a song has a preset EQ set in iTunes, it
    will use that preset, otherwise it does not use any
    EQ.
    In Off, the EQ is not used at all.
    Page 28 of the very fine manual for 2n Gen nano:
    Using the Equalizer
    You can use equalizer presets to change the sound on iPod nano to suit a particular music genre or style. For example, to make rock music sound better, set the equalizer to Rock. To use the equalizer to change the sound on iPod nano:
    Choose Settings > EQ and choose an equalizer preset.
    If you assigned an equalizer preset to a song in iTunes and the iPod nano equalizer is set to Off, the song plays using the iTunes setting. See iTunes Help for more information.
    Hmmmm...? There's nano's EQ and iTunes' EQ...

  • What's the difference between segment filtering and reduced message type

    Hi gurus,
    What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
    Thanks in advance.

    Hi,
    BD53 is for IDoc Reduction.
    this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
    there mandatory fields will be in Green color..
    And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
    the table related to this transation is TBD20
      please go through below blog you have an idea abt that,
    http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
    http://saptotal.com/IDoc%20Segment%20Filtering.html
    regards,
    ganesh.

  • What's the difference between "controlfile autobackup" and "snapshot contro

    Hi All,
    What's the difference between "controlfile autobackup" and "snapshot controlfile" in RMAN configure ? Both are controlfile backups, what the difference between the controlfiles they backup ? Why there are two of these options ?
    thanks

    RMAN creates a control file snapshot to perform catalog resync operations. Control file autobackup will automatically create a backup of the control file whenever there are database structure changes.

  • What's the difference between transport route and transport layer

    what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

    Hi,
    Transport Layer in ABAP Workbench
        The Change and Transport System supports the distribution of development
        work on large projects across multiple SAP Systems.
        The packages in each development system are grouped into one transport
        layer.
        The transport layer determines whether objects are assigned to a local
        or transportable change request.
    Use
        Each of your SAP development systems is assigned a transport layer as
        its standard transport layer. If you use Extended Transport Control, you
        can assign different standard transport layers to certain clients.
        You can define at the most one consolidation target for each SAP System
    and transport layer.
    When you create a package, it is assigned the standard transport layer
    of the SAP System.
    If you want to assign a different transport layer to a package, you
    require the administration authorization for the Change and Transport
    System.
    The objects in a package automatically have the transport attributes
    defined for the corresponding transport layer.
    o   If a consolidation route originating in their SAP System is defined,
         then the objects are assigned to a transportable request, and
         transported into the consolidation target when it is released.
    o   If a consolidation route is not defined, the objects are assigned to
         a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the
    transport attributes of the standard transport layer of the system or
    client.
    It is best to assign a package a standard transport layer for which a
    consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the
    Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
         The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
         Release 4.0A and cannot be maintained.
    Regards
    Ben

Maybe you are looking for

  • How to catch ClassCastException from JSP page?

    I get a ClassCastException within my JSP page and I know where my bug is. However, this classcastexception message is displayed in the browser and I want to catch this exception to also log it into my log file. But I can't find the place where to cat

  • Problem in uploading infoset

    I have a infoset in 1 system which i want to transfer into other system. I have downloaded this infoset from first system and trying to upload in 2nd system but i m getting following error: Error in code for additional field ZANSWL2 Field "BERDATUM"

  • Forefront Endpoint Protection Client filling OS drive with scan and definition files.

    I have installed FEP on our client servers, one of server filling C: drive space with scan files (.bin.xx) and with definitions. Why its not clearing like other servers? Please suggest! We haven't using it through SCCM, we have only FEP client which

  • Ipod has very little space despite the fact there are only 647 songs

    I have a 6GB iPod mini with 647 songs. My file shows that almost all of my memory is gone. I recently used the hard drive function to move my iTunes from one computer to another. Would this effect how much memory I have on my iPod? If so, how can I r

  • Porblem with clone stamp tool

    When I try to use the Clone Stamp Tool, I select the sample area by Alt/click but when I try to apply what is selected, all I get is a white spot. What am I doing wrong. This has worked before, I must have something set incorrectly but I can't figure