What is the effort to upgrade SNC to SNC HANA

Hi Gurus,
Can you give estimates and provide guidance on what is needed to be done to upgrade current SNC landscape (On SCM 7.0 EHP2) to SNC HANA. How much functional resources is needed, or is it all basis work to convert databses?
Current SNC landscape has both supplier (PO/ASN/Invoice/SNI/SMI) and customer (responsive replenishment) processes active
Thanks,
J.

Apple does not provide any aftersales upgrade.
Best.

Similar Messages

I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.

I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.

A 15" mid-2009 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
As has been pointed out, OWC is an excellent source for Mac compatible RAM. Crucial is another first rate source for Mac RAM. RAM from either vendor will work just as well as any purchased from Apple with the bonus of being less expensive and having a lifetime guarantee.
Ciao.

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat11 Pro?

What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat11 Pro?

Acrobat is a program used by a wide variety of users for a even wider number of purposes. So if we simply gave you a feature list, that wouldn't be very helpful.
Tell us how you use Acrobat, and what you do with it, and we can suggest improvements that were made in Acrobat X and XI Pro.

Trying to update iMac G5 with OS X Snow Leopard and unable due to no Intel proccesor. Are all new upgrades going to be unavailable? What is the last available upgrade?

I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor installed?
Thank you
Lindsay

Actually you can upgrade to snow leopard. I have an iMac G4 and upgraded to snow leopard by installing it using an external DVD RW drive. It was complicated but it worked. I ended up going back to using tiger though. I liked it better the simple old school way.

What is the price to upgrade from FCP7 to FCPX?

Does anybody know what is the price to upgrade from FCP7 to FCPX?

Note that FCX isn't an upgrade...it's a completely different application. Thus why you pay the full amount, although the price is less than FCP Studio.
Because this is a new app, you cannot bring FCP 7 projects into FCX...not without a third party utility called 7toX by intelligentassistance.com

HT2404 i was try to upgrade my iphone 3gs via iTunes but it is not activate.what are the process to upgrade ? now it is showing black screen to select country then finally write unable to activate.

i was try to upgrade my iphone 3gs via iTunes but it is not activate.what are the process to upgrade ? now it is showing black screen to select country then finally write unable to activate.

Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier?

What is the best osx upgrade for a G5 2gig dual core

what is the best osx upgrade for a G5 2gig dual core for running music software please

That box definitely needs an additional graphics card to run Aperture. I seem to remember the Nvidia 8800 GT as the one to get (~$60 at Amazon) but you need to verify that it will work in that old G5 because my recall could be faulty.
HTH
-Allen

My mac os x is currently 10.5.8. What is the cost to upgrade to the most current?

My macbook pro os x is currently running 10.5.8. What is the cost to upgrade to the most current?

Assuming you have the upgrade system requirements you would first purchase a Snow Leopard DVD and upgrade to Snow Leopard. Then you update Snow Leopard to 10.6.8 to gain access to the App Store where you would then purchase and download Lion. Costs are $29.00 for Snow Leopard and $30.00 for Lion.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
See the following as well:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).
Once you then purchase and download Lion from the App Store consider this before you actually install Lion:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

What is the sequence for upgrading from 10.4.11 to lion

What is the sequence for upgrading from 10.4.11 to lion. Can't use many apps without it. HELP

Quicken is an example that the OP noted is important to her, too!
Intuit makes it very difficult to find this link?!
Everytime I want to find it to post it for someone else, I have to Google: "cnet quicken 2007 for lion" and then in top listed link: Topper Kessler's review for CNET, I find the direct link to Intuit
This program will work with Quicken 2005, 2006 and 2007 data files directly. If you have a data file from an older version, such as I did, Quicken Deluxe 2002, you must use the PPC version of either Quicken 2006 or 2007 to update the data first; and then the data will work in Quicken 2007 for Lion.
For other PPC programs that require Rosetta, I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

I currently have cs6 production pro. What is the advantage to upgrading to the creative cloud?

I currently have cs6 production pro. What is the advantage to upgrading to the creative cloud?

All New Creative Cloud for 2014 is Here « Adobe Creative Cloud

What is the quickest to upgrade disaster recovery system to NW04s in MSCS?

Hi,
I have an issue which I need assistance from SAP/Windows 2003 experts.
Hope you can share your opinion on an SAP upgrade issue we're grappling with.
Objective : Upgrade our SAP Bank Analyzer disaster recovery environment from NW04 to NW04s SR2, to be same as production. Both production and disaster recovery (DR) run under two node WIN2003 Enterprise MSCS. The SAP CI usually runs on node A and Oracle 10g runs on node B.
The Oracle software, parameters, database files and the SAP folder \usr\sap are already matching. These files and folders are on EMC mirrored disks, so this will be automatically synchronized from production status.
Therefore I believe it is only the SAP software components on the local hard disks - binaries, DLLs, registry, DCOM, environment variable etc, that need to be upgraded on the two DR machines.
For your information, the current SAP 6.40 instance, Oracle 10g instance, MSCS failover capability are all working in the DR environment as we just did an exercise a month ago to prove this.
 Disaster Recovery Environment :
On shared drives that are synchronized between prod and DR : SAP folder \usr\sap including the kernel binaries, Oracle parameter files, database datafiles, redologs, sapbackup etc.
Issue : What is the quickest and reliable method to achieve the objective? Other than the SAP kernel binaries and profiles, I'm not certain what other related components are updated/replaced that are stored locally on each of the clustered machine.
There are three different approaches we can think of :
1) Repeat the whole NW04s upgrade process in the DR environment. This takes several days. The exposure of not having a disaster recovery environment for several days is a minus.
 or
2) Un-install the SAP CI and MSCS definitions. Synchronise the DR shared disks from production to have the upgraded production NW04s database contents and SAP folder \usr\sap.
Use SAPINST to re-install either traditional CI or ASCS option 'System Copy". And then re-create the MSCS definitions for SAP CI using SAPINST again.
The disadvantage is I can't trial this in any other of our environments. Also, we want to run with the traditional CI instead of ASCS until early next year for other reasons. So we would have to reverse the ASCS back to traditional CI with this method, by reversing the steps in OSS NOTE 101190 "Splitting CI after upgrade to 700".
 or
3) Somehow identify all the SAP components that are stored locally on each machine (eg. environment variables, registry settings, DCOM definitions, DLL in various folders). Then just copy them from Production to DR machines or recreate them. I'm not confident of identifying the local SAP components. And I have not been able to find any good OSS NOTEs or forum threads on this topic. The most helpful OSS NOTE I can find is 112266 point 13 and 19.
Thanks for any input.
Benny Kwan

See:
* https://support.mozilla.com/kb/Form+autocomplete
* Firefox > Preferences > Privacy > History: "Remember search and form history"
* Autofill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/

What are the steps to Upgrade EBS 11.5.10.2 (RDBMS : 11.2.0.2) to EBS 12.1

Hi,
We plan to Upgrade from EBS 11.5.10.2 to EBS 12.1 (Last Release)
Our architecture :
- 2 Nodes Application Tiers : Apache + Forms
- 2 Nodes Application Tiers : Concurrent Managers + Reports
-> Those Nodes are on Linux RedHat 5.5 - Shared APPL_TOP
- 1 Node DbTier 11.2.0.2 on HP-UX Itanium 11
What are the Pre-requisits , Best Practices , White Papers , Step by Steps ... to accomplish this Upgrade ?
Regards,

This was discussed many times in the forum before, please see old threads for details -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11i+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

What is the procedure when upgrading to Creative Suite 5 Production Premium?

Hello!
In 2006 I bought the Adobe Creative Suite Production Studio Premium. The procedure when activating the installation I don't remember exactly. The computer on which the Suite was installed doesn't have an internet connection (I thought that was the simplest and safest thing to do; I have another computer for that purpose).
Now, if I want to upgrade to Creative Suite 5 on a newly bought i7 computer, what is the procedure? What do I need to prove to Adobe that I'm eligible for the upgrade? Please tell me the serial number on the box is enough... my old editing computer doesn't start at all so any info contained there is unobtainable at the moment.

The serial number of the old version - is that, by any chance, something you get from Adobe via internet or is it stuck on the box with the manuals and DVDs?I can't remember myself.
I kept the following (I don't even know if it is from Adobe) on my other (internet) computer. Someone recognizes this as specifically relating to Production Studio, when it comes to the serial number format for example? L is a letter and N is a number.
Below are your Serial and Authorization keys.
Enter them in the "Enter registration keys" window, which can be found at:
"Help menu" -> "Enter registration keys".
Serial-key: NNLL-LLLN-LLLL-LNLL Auth-key: LLLN-NLNL-NLLN
As I said, I can't access info on my old editing computer. Any help would be appreciated.

What is the max os upgrade available for power mac g5 w/powerpc processor

What is the max one can upgrade the os on a powerpc power mac g5

Hi, 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

What is the effort to upgrade SNC to SNC HANA

Similar Messages

Maybe you are looking for