What is the equivalent function of this...

the following codes are in awt form, what are the equivalent swt form of the following function? thank you for your help
ActionListener listener = new MenuItemActionListener(panel);
*MenuItemActionListener(panel); is the awt
Component parent; (Component is the awt)
and using Color.<what_color>
Again thank you!

if you're planning on coming here getting the forum to re-write all your awt code in swt bit by bit, forget it. as far as I know, there's only 2 or 3 people who post here that know swt, and nobody's in the business of rewriting code on other people's behalf anyway. the swt documentation that comes with eclipse, plus the javadocs for swt, are more than good enough for you to manage this

Similar Messages

What is the equivalent function of NIDAQYield in NI-DAQmx?

I have to migrate from traditional NI-DAQ to NI-DAQmx for Window 7 64bits system. I like to find the equivalent function of NIDAQYield in NI-DAQmx?

As far as I can see here, NIDAQYield is simply a way to process system events, so I suppose calling ProcessSystemEvents () will be equivalent to calling it.I do not know of a native DAQmx function that does the same. It is to be said, though, that DAQmx way of handling acquisition process is different from Traditional DAQ one and direct translation is not always possible, so depending on how you migrate your code, calling those functions may be unnecessary.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

What is the equivalent function or combination of functions for the following ASYST code

I'm translating a program from AYSYT (very old out-of-date language)to LABVIEW. Thanks to the help from you guys. I have done 99% of my work. But I still have a small question to ask for help. Dose any body know what function or combination of functions in LABVIEW is equivalent to the folowing ASYST code: 0.5 set cut off frequency MOB(array used in the program) smooth.
After reading the ASYST MANUAL, I know "smooth" is to apply some kind window(e.g. BALCKMAN).but LABVIEW doesn't have the "smooth"function

I got strange result after using balckman window.
the xy-graphs of my data before and after using blackman
window are posted here. the magnitude and the peaks all changed after using blackman window.the peaks magnitude decreased more than ten times. The original ASYST code gives only a little bit lower peak after smoothing(4.2e-6 is the highest peak before smoothing, while 3.6e-6 is the smoothed highest peak).
Attachments:
before_blackman_windowed.bmp ‏1747 KB
blackman_windowed.bmp ‏1747 KB

What is the main functionality of FM 'ISU_S_PAYSCHEME_ROLLIN_ROLLOUT' ?

Hi Folks,
I need to use the function module 'ISU_S_PAYSCHEME_ROLLIN_ROLLOUT'. what is the main functionality of this function module? there is no documentation available for this FM.
Thanks in advance

Hi,
Plz follow the link below for answer of your question.
Link is: Re: how to call standard SAP method in the Custom Program ?
Thanks & Regards,
Sarita Singh Rathour

What is the equivalent selection in BI7? (Following BW 3.5 How to...Set up

Hi,
What is the equivalent selection in BI7? (Following BW 3.5 How to...Set up BW Statistics)
I am trying to install BW statistics and all the good things that come with it for BI7. Following the instructions in a document that I was directed to on this site, in SBIW, I installed and replicated all the datasource in under TCT tree (Technical content)
The instruction is for versions prior to BI7 and I had to make modifications as I go.
Now, this instruction direct me to go to:
rsa1, Bi Content (left) and then InfoProviders by InfoAreas and select all InfoProviders for the InfoAreas BW Statistics and BW Metadata under the node Technical Content.
1.
In BI7, there is no BW Statistics and BW Metadata infoareas under Technical Content if I follow the directions strictly.
What is the equivalent of this in BI7?
2.
In the instructions, the author continues to collect these InfoAreas from under Technical Content:
BW Data Slice
BW Features characteristics
BW Metadata
BW Statistics
In BI7, do we need exactly these? Or, now different? Should I just transfer all the infoareas under Technical Content? What is the disadvantage of collecting a ALL?
Thanks

Thanks for the link and i believe it will come in handing.
Yet, it does not have the step by step installation information on page 46 of this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Do you have the BI7 version of this link?
Also, ssame stewise info is on page 4 of this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5401ab90-0201-0010-b394-99ffdb15235b
If you have the BI7 version of this link also, it will answer my question.
Thanks

What is the Equivalent tool of CHDBPASS in NetWeaver 7

I want to change the password of SYSTEM and SYS in NetWeaver 7. What is the Equivalent tool of CHDBPASS in NetWeaver 7
Edited by: Sebastian Sebaraj on Apr 3, 2008 3:34 PM

Hai,
For the SAP BASIS >= Release 6.10:
Use the oradbusr.sql script. This script is attached to the note 50088. The script is valid for Oracle and Unix. Use the following syntax
           sqlplus /NOLOG @oradbusr. sql SCHEMAOWNER UNIX SAP_SID x
The SCHEMAOWNER is either SAPR3 or has to start with SAP followed by the three digit schema id (example: SAPPRD).
On Unix x is a dummy parameter and may e. g. be set to X.
To change the password for the SAPR3 or SAP<SID> user you have to use the following command:
           brconnect -u system/<syst_pwd> -f chpass -o SAPR3 -p <new_sap_pwd>
or
           brconnect -u system/<syst_pwd> -f chpass -o sap< sid> -p <new_sap_pwd>
Thanks and Regards,

What are the different functions used in sap script?

Hi,
What are the different functions used in sap script? What are the parameters used in each Function?
Regards,
Mahesh

he print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
FORM                              = ' '
LANGUAGE                          = SY-LANGU
OPTIONS                           =
MAIL_SENDER                       =
MAIL_RECIPIENT                    =
MAIL_APPL_OBJECT                  =
RAW_DATA_INTERFACE                = '*'
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
EXCEPTIONS
CANCELED                          = 1
DEVICE                            = 2
FORM                              = 3
OPTIONS                           = 4
UNCLOSED                          = 5
MAIL_OPTIONS                      = 6
ARCHIVE_ERROR                     = 7
INVALID_FAX_NUMBER                = 8
MORE_PARAMS_NEEDED_IN_BATCH       = 9
SPOOL_ERROR                       = 10
OTHERS                            = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM      Name of the form
DEVICE
PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS      Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
OTHERS                         = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT      Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT                        = ' '
FUNCTION                       = 'SET'
TYPE                           = 'BODY'
WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
ELEMENT                        = 1
FUNCTION                       = 2
TYPE                           = 3
UNOPENED                       = 4
UNSTARTED                      = 5
WINDOW                         = 6
BAD_PAGEFORMAT_FOR_PRINT       = 7
SPOOL_ERROR                    = 8
OTHERS                         = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT      Specifies which textelement is printed
WINDOW      Specifies which window is printed
TYPE      Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION      Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
          ELEMENT                  = 'INTRODUCTION'
          FUNCTION                 = 'SET'
          TYPE                     = 'BODY'
          WINDOW                   = 'MAIN'
    EXCEPTIONS
         OTHERS                   = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
          ELEMENT                  = 'ITEM_HEADER'
          FUNCTION                 = 'SET'
          TYPE                     = 'BODY'
          WINDOW                   = 'MAIN'
    EXCEPTIONS
         OTHERS                   = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
          ELEMENT                  = 'ITEM_HEADER'
          FUNCTION                 = 'SET'
          TYPE                     = 'TOP'
          WINDOW                   = 'MAIN'
    EXCEPTIONS
         OTHERS                   = 8
Write ITEM_LINE
LOOP AT .....
   CALL FUNCTION 'WRITE_FORM'
        EXPORTING
             ELEMENT               = 'ITEM_LINE'
             FUNCTION              = 'SET'
             TYPE                  = 'BODY'
             WINDOW                = 'MAIN'
       EXCEPTIONS
            OTHERS                 = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
          ELEMENT                  = 'ITEM_HEADER'
          FUNCTION                 = 'DELETE'
          TYPE                     = 'TOP'
          WINDOW                   = 'MAIN'
    EXCEPTIONS
         OTHERS                    = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
          ELEMENT                  = 'CLOSING_REMARK'
          FUNCTION                 = 'SET'
          TYPE                          = 'BODY'
          WINDOW                   = 'MAIN'
    EXCEPTIONS
         OTHERS                    = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX          =
FORM                   = ' '
LANGUAGE               = ' '
STARTPAGE              = ' '
PROGRAM                = ' '
MAIL_APPL_OBJECT       =
IMPORTING
LANGUAGE               =
EXCEPTIONS
FORM                   = 1
FORMAT                 = 2
UNENDED                = 3
UNOPENED               = 4
UNUSED                 = 5
SPOOL_ERROR            = 6
OTHERS                 = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT                         =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SPOOL_ERROR                    = 3
OTHERS                         = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
    command         =
EXCEPTIONS
UNOPENED        = 1
UNSTARTED       = 2
OTHERS          = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
    COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
    COMMAND = 'ENDPROTECT'.

What is the inbuilt function for ctrl+f11 and f11?

what is the inbuilt function for ctrl+f11 and f11?

Forms version?
If 11g then see the fmrpcweb.res file in %ORACLE_INSTANCE%config\FormsComponent\forms folder.
If you ask questions with inadequate inputs like this one, you are bound to end up with
>
Handle:      shravan
Status Level:      Newbie
Registered:      Sep 20, 2011
Total Posts:      16
<b>Total Questions:      10 (10 unresolved) </b>
>
Cheers,

What is the equivalent Windows laptop?

What's the best Windows laptop equivalent to the MBP 15.4"? My vote goes to the Thinkpad T60p.

sigh
He asked what's the equivalent. When people ask for the "equivalent", they mean comparable hardware at a similar price. Most techies (who are what Apple's trying to court right now) will want to see similar specs, maybe compare weights, size, etc. We don't really care about immeasurable things like "design" and relatively useless stuff like the "patent pending magnetic power connector" (I have never, ever tripped over my laptops' wires. Neither has my family. And over the course of the last 10 years I've owned 6 laptops).
As for trying to compare, if you honestly don't know what you're talking about, please don't speak. Dual Athlons are not the equivalent of an Intel Core Duo. Dual Athlons are a lot faster and guzzle tremendous amounts of energy. If you want to make a valid comparison, look at the Inspiron 9300 with Core Duo and a similar video card.
Please don't let the reality distortion field and marketingspeak affect what you say to others. This is a big year for Apple to court us geeks, and we really, REALLY don't like the reality distortion field and marketingspeak. Just give us specs and benchmarks. Thanks.

HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

Can't log in message "what is the username associated with this smartphone"

When I attempt to login to app world, I enter my email address and pw, and the it gives me a popup for - "what is the username associated with this smartphone". How do I find out what to enter here? (I don't remember what I may have used in the past).
Also, how can I be sure that I am using the right email address to login? I've tried my other emails and I get stopped before this screen since it doesn't recognize the email.
THanks for your help

How can you do a security wipe if you cannot get past the blue BlackBerry ID login page?

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it.

What is the equivalent for 'On Change of' Event in ABAP OBJECTS?

What is the equivalent for 'On Change of' Event in ABAP OBJECTS? and how to use it in LOOP control?

hi,
There is no such Equivalent in OO ABAP.
You have to Raise your own Event within tha class checking the value of the field whose value is changing.
Regards
Sumit Agarwal

What is the equivalent function of this...

Similar Messages

Maybe you are looking for