What is the main usage of resource database?
i want to know the resouce database , actually it will not appear physically then why it will be used
Hi ravana
The Resource database makes upgrading to a new version of SQL Server an easier and faster procedure. In earlier versions of SQL Server, upgrading required dropping and creating system objects.
Because the Resource database file contains all system objects, an upgrade is now accomplished simply by copying the single Resource database file to the local server.
Please follow this link to get information about some common questions with answers related to Resource database
http://blogs.msdn.com/b/vsanil/archive/2012/11/02/resource-database-common-questions.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other
forum members can benefit from it
Amit Kotha
Similar Messages
-
What are the main sap script events and their functionality and usage?
what are the main sap script events and their functionality and usage?
Hi,
Inside the Script, there are events like Top of Page, End of page etc.
Please elaborate about your requirement.
Best regards,
Prashant -
What is the main diff b/n ldb pnp and pnpce?
hi ,
what is the main diff b/n ldb pnp and pnpce?
thanks.Hi Arun,
PNP/PNPCE - Both are Logical Databases for PA Module
In PNPCE - CE stands for Concurrent Employment.
The differnces are:
The PNPCE logical database supports the evaluation of HR master data. It includes the functions of the PNP logical database and offers additional evaluation options. Therefore, you should use the PNPCE logical database instead of the PNP logical database for all new developments.
The enhanced functionality of PNPCE in comparison to PNP essentially concerns the evaluation of Concurrent Employment, that is the possibility to group evaluate several assignments/personnel numbers of a person. The new events 'GET PERSON' and 'GET GROUP' as well as an enhanced syntax for the INFOTYPES statement (addition AS PERSON TABLE) for the procurement of infotype data enable you to use the new functionality. The use of these new functions is optional. You can run a PNPCE report that does not use the new events and the addition for the INFOTYPES statement in a PNP-compatible session. Since the PNPCE also has an improved selection screen, each report benefits from this even if the report does not use the functions for evaluating Concurrent Employment.
Hope this helps you.
Regards,
Chandra Sekhar -
What is the main use of pooled talbe and where are they use?
Hi gus:
Can somebody tell me what is the main use of pooled table and where are they use,thanks!
Regards
Jerry
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Sep 1, 2009 9:11 AMHi,
Table pools are special table types in the ABAP Dictionary. The data from several different tables can be stored together in a table pool or table cluster. Tables assigned to a table pool or table cluster are referred to as pooled tables or cluster tables.
This table are similar to the CLUSTER table types but these work on "LINEAR SEARCH" while CLUSTER TABLE uses "BINARY SEARCH to retrieve the data from the various tables and thsi is mainly used in the logical databases "LDB's" used in HR or ABAP-HR.
A table in the database in which all records from the pooled tables assigned to the table pool are stored corresponds to a table pool.
The definition of a pool consists essentially of two key fields (Tabname and Varkey) and a long argument field (Vardata).
Table Clusters Several logical data records from different cluster tables can be stored together in one physical
record in a table cluster.
A cluster key consists of a series of freely definable key fields and a field (Pageno) for distinguishing continuation records. A cluster also contains a long field (Vardata) that contains the contents of the data fields of the cluster tables for this key. If the data does not fit into the long field, continuation records are created. Control information on the structure of the data string is still written at the beginning of the Vardata field.
Regards,
Samad. -
What is the main use of mseg table
what is the main use of mseg table. when we should actually use this. please explain me in detail. then what is the difference betweeln mseg and mara table.
MM Process flow:
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM:
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Transaction codes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Also please check this links.
http://www.sapgenie.com/sapfunc/mm.htm
http://www.sap-basis-abap.com/sapmm.htm
Go thro this link, u will get a clear picture abt the MM flow.
MM flow
MM flow
MM flow
<b>Reward Points if it is helpful</b>
Thanks
Abhay Singh. -
Hi everyone
How are you?
I am very new on RMI.
Till now, i don't know what is RMI main usage?
Could someone offer me some application example which using RMI technology.
So i can know in what conditions i could use RMI.
If you can reply my full question, i will be very appricated.Have you looked at the RMI tutorial? It has been around awhile and is pretty decent.
http://java.sun.com/docs/books/tutorial/rmi/index.html -
What is the main difference between view and materialize view and advantage of Mview ??
What is the main difference between view and materialize view and advantage of Mview ??
1.A view uses a query to pull data from its associated tables.
2.Views do not have data's physically stored in the Database.
3.Views Get the Data from 2 or more tables and displays as a single block.
4.But a materialized view is a table on disk is a result set of a query done.
5.A Materialized view can have data's in the database.
6.Materialized view are used for Boosting the Performance.
7.And the important one is Materialized views are updated based on the parameters defined when they are created.
8.By using triggers we can update the data in a materialized view.
9.When you call a materialized view it will show the data when it was last updated.
Hope it helps. -
What r the main preformence tunning things to fallow in programming..?
What r the main preformence tunning things to fallow in programming..?
HI
Ways of Performance Tuning
1. Selection Criteria
2. Select Statements
Select Queries
SQL Interface
Aggregate Functions
For all Entries
Select Over more than one internal table
Selection Criteria
1. Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement.
2. Select with selection list.
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Select Statements Select Queries
1. Avoid nested selects
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
2. Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
3. When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields. In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
4. For testing existence, use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit.
SELECT * FROM SBOOK INTO SBOOK_WA
UP TO 1 ROWS
WHERE CARRID = 'LH'.
ENDSELECT.
The above code is more optimized as compared to the code mentioned below for testing existence of a record.
SELECT * FROM SBOOK INTO SBOOK_WA
WHERE CARRID = 'LH'.
EXIT.
ENDSELECT.
5. Use Select Single if all primary key fields are supplied in the Where condition .
If all primary key fields are supplied in the Where conditions you can even use Select Single.
Select Single requires one communication with the database system, whereas Select-Endselect needs two.
Select Statements SQL Interface
1. Use column updates instead of single-row updates
to update your database tables.
SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
SFLIGHT_WA-SEATSOCC =
SFLIGHT_WA-SEATSOCC - 1.
UPDATE SFLIGHT FROM SFLIGHT_WA.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
UPDATE SFLIGHT
SET SEATSOCC = SEATSOCC - 1.
2. For all frequently used Select statements, try to use an index.
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE MANDT IN ( SELECT MANDT FROM T000 )
AND CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
3. Using buffered tables improves the performance considerably.
Bypassing the buffer increases the network considerably
SELECT SINGLE * FROM T100 INTO T100_WA
BYPASSING BUFFER
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
The above mentioned code can be more optimized by using the following code
SELECT SINGLE * FROM T100 INTO T100_WA
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
Select Statements Aggregate Functions
If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
Some of the Aggregate functions allowed in SAP are MAX, MIN, AVG, SUM, COUNT, COUNT( * )
Consider the following extract.
Maxno = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxno.
Maxno = zflight-fligh.
Endselect.
The above mentioned code can be much more optimized by using the following code.
Select max( fligh ) from zflight into maxno where airln = LF and cntry = IN.
Select Statements For All Entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Points to be must considered FOR ALL ENTRIES
Check that data is present in the driver table
Sorting the driver table
Removing duplicates from the driver table
Consider the following piece of extract
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
The above mentioned can be more optimized by using the following code.
Sort int_cntry by cntry.
Delete adjacent duplicates from int_cntry.
If NOT int_cntry[] is INITIAL.
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.
Endif.
Select Statements Select Over more than one Internal table
1. Its better to use a views instead of nested Select statements.
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T INTO DD01T_WA
WHERE DOMNAME = DD01L_WA-DOMNAME
AND AS4LOCAL = 'A'
AND AS4VERS = DD01L_WA-AS4VERS
AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
The above code can be more optimized by extracting all the data from view DD01V_WA
SELECT * FROM DD01V INTO DD01V_WA
WHERE DOMNAME LIKE 'CHAR%'
AND DDLANGUAGE = SY-LANGU.
ENDSELECT
2. To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
3. Instead of using nested Select loops it is often better to use subqueries.
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
INTO SFLIGHT_WA
FOR ALL ENTRIES IN T_SPFLI
WHERE SEATSOCC < F~SEATSMAX
AND CARRID = T_SPFLI-CARRID
AND CONNID = T_SPFLI-CONNID
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
WHERE SEATSOCC < F~SEATSMAX
AND EXISTS ( SELECT * FROM SPFLI
WHERE CARRID = F~CARRID
AND CONNID = F~CONNID
AND CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK' )
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
1. Table operations should be done using explicit work areas rather than via header lines.
2. Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
3. A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4. A binary search using secondary index takes considerably less time.
5. LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
6. Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
Point # 2
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
Point # 3
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
Point # 5
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
Point # 6
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7. Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
8. If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
9. "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
10. DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
11. "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
Point # 7
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
<WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
WA-FLAG = 'X'.
MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
Point # 8
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
ADD: WA1-VAL1 TO WA2-VAL1,
WA1-VAL2 TO WA2-VAL2.
MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
Point # 9
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 10
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
DELETE ITAB.
ELSE.
PREV_LINE = WA.
ENDIF.
ENDLOOP.
Point # 11
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12. Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
13. Specify the sort key as restrictively as possible to run the program faster.
Point # 12
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 13
SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables contd
Hashed and Sorted tables
1. For single read access hashed tables are more optimized as compared to sorted tables.
2. For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
<b>Reward if usefull</b> -
What are the main tables using in vendor performance report.
what are the main tables using in vendor performance report.
how many select statements are in ABAP reports.Refer the links -
vendor performance report !!!
vendor performance report
vendor performance report
I need standard vendor performance report
Regards,
Amit
Reward all helpful replies. -
What are the main transaction codes in XI?
What are the main transaction codes in XI?
SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
http://www.erpgenie.com/abaptips/content/view/452/62/ -
What are the main steps to be taken care while doing recording for LSMW
Hi,
I am facing problem in LSMW.
Can anybody suggest me that What are the main steps to be taken care while doing recording for LSMW for recording mm01 ?
thanks'
nareshHi,
Recording in LSMW is similar as SHDB.
in LSMW after you give Project-Subproject and Object.
1)Go to-> Maintain Object Attributes -> double click
2)Press Display/Change Button at top left to make editable mode.
3)Select radiobuton -> Batch Input -> Give Recording name say Z_mm01
4) Click the Recording Overview boton on right -> Give TCode which u want to record....
Rest refer the Document link attached.
Please find the links to various threads on the same.
Re: LSMW - Using a BAPI
BAPI, IDOC in LSMW
Upload the data in LSMW using BAPI
This one is the most complete document for the same
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://service.sap.com/lsmw.
Regards
Kiran -
What are the main things to do when optimizing the performance of Java App
what are the main things to do when optimizing the performance of Java App
what are the main things to do when optimizing the performance of Java App
-
What are the main tables to refer in ASAP(asap 7.2)?
what are the main tables to refer in ASAP(asap 7.2)?
what are the main tables to refer in ASAP(asap 7.2)?
-
What are the main uses for a Macbook Pro, and also for a Macbook Air?
I'm curious of whether I should buy a Macbook Pro, or Macbook Air. Before I make my decision I would like to know what are the main purpaces for each Macbook.
Here's an article that compares the two.
http://news.cnet.com/8301-13579_3-57458148-37/13-inch-macbook-air-vs-13-inch-mac book-pro-which-should-you-buy/?tag=postrtcol;posts -
What is the data usage for ipad mini on stand by when connected to WIFI?
We connected 34 ipad mini's for yacht WIFI network that has internet access. Now data usage is 1GB/h higher for the all connections than before.
None of the ipad's are used for internet. My question is what is the data usage when ipad is is standby usage and how I can stop is downloading/uploading.
This slows down internet for rest of the users in same network.
Please help.Check out this Apple article -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
It'll walk you through uninstalling iTunes and the other Apple software.
Maybe you are looking for
-
Non-interactive PDF forms & licences
Hello, I need an advice. I created WD application using non-interactive PDF form. Actually I used UI element InteractiveForm but we didn't place any editable element (text box, dropdown list, ...) into it. We just want to generate the PDF form dynami
-
P2V of a Dell Windows server with HW Raid
Hi, I've got a few very large WIndows 2003 Dell Servers to Virtualize. The problem I've got is that each of the Dell Servers has a hardware raid configured (using the device driver mraid.sys). If I perform a standard P2V of the Dell Server the Window
-
hi
-
Possibility of disabling call waiting prior to receiving an important call?
I am aware that I can set 'do not disturb', and allow certain numbers to ring. The problem is, I am scheduled for a phone interview -- from a university. This means that a. they will call me (obv.), and b. the actual phone# the call comes from could
-
Hi all, I am new to swing programming, please explain me the swing worker with an example program, any help of code or tutorial is greatly appreciated. thanks in advance, karthik.