What is the purpose of IA32.api plugin and how to disable it.?

Hello,
We have an issue with this plugin in our company.
This plugin is making IE Crash.
I would like to properly disable this to workaround the issue.
Questions:
1°) What is the purpose of this plugin? i heard it's about AutoUpdate, is this true? if so i suppose disabling AutoUpdate should suffice.
2°) I know the trick to rename the IA32.api file within the plugins folder but it seems like it make Adobe Reader more unstable. So i think this is not a proper way to do it.
Any help would be appreciated.
Cheers
-Benjamin

Our application uses Internet Explorer with the default PDF viewer as Adobe Reader to display PDFs.  The html just specifies "open file xxx.pdf" and the default viewer is invoked.  This works fine and the user closes the PDF when done and goes on his way.  But we see a lot of errors where our application registers a crash, and when the crash dump is analyzed the crash is below:
      another Module attempted to call the following unloaded Module: IA32.api or AcroPDF.dll
As I can see in the forums this has been an issue with Adobe reader for several years.  Is there any solution or work around for this?  We are about to lose a major account due to the frequent crashes in Adobe that look as if they came from our application.

Similar Messages

  • What is the purpose of F-03 clearing? How to clear GL account there in F-03

    HI,
    What is the purpose of F-03 clearing? How to clear GL account there in F-03.Please help me in understanding the concept.
    Thanks
    Supriya

    Hello,
    There are cases where you pass some manual entries which might not have cleared against the other related item, THOUGH the balance has been ZERO.  Like cases where you reverse logistics invoice through MR8M, then entry gets reversed but they are still open items. Like some GRIR accounts might have debit and credit entries for same purchase order and the balance MIGHT have become ZERO, but still they are open item. To clear all these open itesm (changing the status of the open items to cleared items, you need to use F-03)
    Please go to F-03 and give the GL account which want to manually clear the debit and credit items.
    Normally you will this kind of activity for clearing account, where there is no automatic clearing mechanism explained in OB74.
    now click on open items. (if you know any specific things like document number etc. you can fill them, then they will act as a FILTER and only those document numbers you feeded will be appeared)
    Now select the items you want to clear. Deselected all other you do not want to clear. Selected items will be in blue colour and the difference at the end of the screen MUST be ZERO to post (unless you configured otherwise)
    Click on save button.
    The entries passed will GL Account A Dr and GL Account B Cr. Meaning that there is no implication but posting the debit and crediting the same account and clearing the status of the line items from OPEN to CLEARED.
    Hope I am clear.
    Regards,
    Ravi

  • I want to know what's the conference call in community level and how to use it

    i want to know what's the conference call in community level and how to use it

    Welcome to Apple Support Communities
    Conference calls are got when you reach level 4. Sometimes, ASC hosts may do a conference call about something related to Apple Support Communities. You will be notified through mail or through the "Using Apple Support Communities" forum.
    The last community calls were only for level 6 and higher users, so it's possible that you don't get invited to any until you reach level 6

  • HT201210 my iphone 3 couldn't restore, its saying the error 46. what is the meaning of error 46?and how can i resolve it?

    my iphone 3 couldn't restore, its saying the error 46. what is the meaning of error 46?and how can i resolve it?

    It doesn't matter when you installed antivirus software; if you have it on your computer it will frequently block access from applications to sites it does not know about. A sync does not require access to a site not on your computer; an upgrade clearly does. So if you have never jailbroken any device you do not need to be concerned about your hosts file, but you DO need to temporarily disable your antivirus during the update process.
    The hosts file is an operating system file on all computers that overrides DNS lookup. In order to jailbreak or hack an iDevice the programs that do it need to redirect iTunes so it does not go to the Apple activation server, but instead goes to the hacking program for activation instructions. It does this by adding a record to the hosts file that bypasses the DNS lookup for gs.apple.com. But you don't have to be concerned about this.

  • What is the usage of Request Variable ? and how we can use it ?

    Hi All,
    What is the usage of Request Variable ? and how we can use it ?
    Thanks in advance

    Hi,
    A Request variable is the same as a Session variable:
    http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
    Cheers,
    Daan Bakboord
    Scamander Solutions

  • I have Boot Camp running on a separate HD (not a partition on my Mac drive).  I would like to partition the PC HD to have a multi boot PC.  What is the proper way to do this and how do I select which partition to start the PC?

    I have Boot Camp running on a separate HD (not a partition on my Mac drive).  I would like to partition the PC HD to have a multi boot PC.  What is the proper way to do this? How do I select which partition to start the PC?

    I have Boot Camp running on a separate HD (not a partition on my Mac drive).  I would like to partition the PC HD to have a multi boot PC.  What is the proper way to do this? How do I select which partition to start the PC?

  • What is the "other" section on my ipod and how do i remove it

    hi, im not the most ipod literate user in the world, but i have heaps of storage space being used in the section other. what is in there and how do i take it off?

    Hi, welcome to Apple Discussions.
    "Other" is the measure of used space on the iPod not taken up by Audio, Video & Photos. This includes the iPod's library and artwork plus any files you may have copied to your iPod in disk mode. The overhead for the library & artwork data is typically 1-2% of the size of the media, e.g. for 100Gb of Audio & Video expect to have around 1.5Gb of "Other". This information is needed for the iPod's operation and cannot be removed.
    If you have significantly larger amounts of "Other", not related to files you've intentionally placed on the iPod, then these are probably disconnected copies of your media files or iPod libraries left over from failed sync operations. The only way to recover the space is to do a full restore.
    tt2

  • What's the 'other' part in my storage and how do I get rid of it?

    A big part of the storage of my iPod Touch 4th Generation is occupied with 'other', it's about 7 GB. What is this and how do I get rid of it?

    What is the Other on my iPhone and How to Remove It
    An "other" that large usually indicates that the "other" includes corrupted files.
    First try:
    "First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
    as recommended by:
    How do I get rid of "other" storage: Apple Support Communities
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up

  • Custom refnum - what is the underlying numeric type of refnums and how do I comply with the subtype

    Specific refnum I am planning using is based on the byte stream file refnum - and will be passed in and out of a DLL via code interface nodes - would it be U32 or I32 underlying type or something else?
    I am basing the sub-type concept on the following online reference:
    http://labviewwiki.org/Refnum
    Is the above correct and how are the 8 bit values encoded into the refnum numeric type (MSB's or other?)

    Steve_Mowbray wrote:
    Thanks for prompt and clear response
    - labview file manager functions can be used to access the file OR the file descriptor can be passed to my own custom code functions (I hope)
    That last one is undocumented and may not work on all LabVIEW platforms. It is true for older 32 bit versions of LabVIEW but may change at any time at NIs discretion since they never documented that nor guaranteed that it might work that way.
    Also on Windows there are several different file descriptors possible. First you have the WinAPI HANDLE, then the C runtime "int fd" and FILE datatypes. All of them are not the same, but the LabVIEW File did in the past map to the HANDLE. 

  • What does the other mean on my itunes and how do you see what is in your other?

    When i was syncing my ipod its other category rose from around 1gb to 42gb in seconds and i do not know what the files are can anyone suggest something, because i have been on other chat things and they said it would be either album artwork or photos

    Other is the measure of used space on the iPod not taken up by Audio, Video & Photos. This includes the iPod's library and artwork plus any files you may have copied to your iPod in disk mode. The overhead for the library & artwork data is typically 1-2% of the size of the media, e.g. for 1Gb of Audio & Video expect to have around 15mb of Other. This information is needed for the iPod's operation and cannot be removed.
    If you have significantly larger amounts of Other, not related to files you've intentionally placed on the iPod, then these are probably disconnected copies of your media files or iPod libraries left over from failed sync operations. The only way to recover the space is to do a full restore.
    If you have copies of all your media in your iTunes library this isn't a problem, but if you've been manually managing the content then you might need to try to recover the files from it first. See this post by Zevoneer on transferring files from the iPod to your computer. Some of the tools rely on the iPod having a healthy library however the manual method mentioned towards the end of the post should work regardless.
    Note restoring should clear all files from the iPod's drive however sometimes it doesn't actually seem to work. Options include manually deleting all visible & hidden files & folders via Explorer/Finder or formatting the drive.
    When repopulating the drive you may find breaking the process up into smaller stages makes it less likely to fail.
    Break up large transfers
    In iTunes select the menu item File... New Smart Playlist. Change the first drop-down box to Playlist, the next to is and the next to Music or whatever playlist holds the bulk of the content you want on your device. Tick against Limit to, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule (File... Edit playlist) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
    tt2

  • What does the xantrex driver error 5 mean and how to solve it?

    Dear Experts,
    I downloaded a new XANTREX driver and used it to control our new XHR
    150-7 power supply. I tried to use the GET STRAT.vi to control the
    output of the power supply. The output could be controlled according to
    the command input. However, there is always an ERROR 5 message poped
    out whenever it ran. The error source seemed to be in the DELAY &
    READ.vi.
    I would be most grateful if you could tell me how solve this problem at your earliest convenience.
    Thanks a lot for your attention and help,
    James

    Exactly which driver did you downlaod and from where? By "GET STRAT", do you mean one of the Getting Started VIs? Error 5 means "NI-488:  Command requires GPIB Controller to be System Controller." Are you using GPIB to control the instrument? If so, what type of board are you using and which version of VISA and NI-488? If the error only occurs on a read, try issuing the query from MAX and see if the error occurs there. In a couple of the Xantrex drivers I looked at, there seemed to be some fixed delays after a write and before a read. You might try increasing those values to see if that makes any difference.

  • What is the default swapiness of Arch? And how can I change it?

    Actually, i'm only assuming my swap is even working, because it never seems to use it, except when I hibernate/suspend.
    Does Arch use a "swapiness" value like Ubuntu does? What is it by default? I think Ubuntu's was either 60 or 80.

    I'm not sure what the default swappiness is, since I've modified mine. If you've got a system installed and haven't touched anything you can find the default swappiness by doing
    cat /proc/sys/vm/swappiness
    as root. To adjust the swappiness, put
    vm.swappiness = N
    in the file /etc/sysctl.conf where N is between 1 and 100 (I believe.) Lower swappiness means that Linux will require higher memory pressure before it starts swapping things out.
    Regards,
    j

  • What's the iTouch Equivalent of Disk Mode and how can I Obtain a copy?

    Apparently iPhones and iTouches have no Disk Mode. However, I am sure that there must be some way to get an iPhone equivalent. Does anyone have any idea what that might be?

    Hi There
    There are apps on the app store which allow you to store files in them. Air Sharing and wifi HD are two that I know of.
    Hope this helps
    J.C

  • What is the "other" section on my iphone , and how do you erase it

    by other i mean in itunes when you sync your iphone , the bar at the bottom theres a little other section and i have 3 gbs of that , no my phone is not jailbroken

    Take a look at this link, https://discussions.apple.com/message/11675987#11675987

  • What is the latest version of JDK?And how can I get it?

    I am interested in using the Java program.I am the beginner.Is there anyone who knows the answer to the question?Plese tell me.
    Thanks.

    JavaTM 2 SDK, Standard Edition, v 1.4.0 Release Candidate (J2SETM)
    you can get it here:
    http://java.sun.com/j2se/1.4/p://java.sun.com/j2se/1.4/

Maybe you are looking for