What is the use of Running Program RMBWV3nn in SE38...?

Hi All,
Please Can anybody tell me, What is the use of using program <b>RMBWV3nn</b> in SE38..?
Regards,
Kiran Telkar

Hi Kiran,
The deltas for logistics extractor are moved depending on the setup of Job Control in LBWE.
To manually move the deltas we can run the R/3 programs depending on Application Components.
Use the following programs to move the deltas manually.
Go to transaction SE38 in R/3 and run the relevant program to move data from LBWQ to RSA7
     02 Purchasing => RMBWV302
     03 Inventory Controlling => RMBWV303
     04 Shop Floor Control => RMBWV304
     08 Shipment => RMBWV308
     11 SD Sales BW => RMBWV311
     12 LE Shipping BW => RMBWV312
     13 SD Billing BW => RMBWV313

Similar Messages

What is the uses of this programe(accelerometer)?

what is the uses of this programe(accelerometer) in N95 original or N95 8g and from where I can get it?

This is Rotateme, but needs to be signed.
http://www.bysamir.fr/rotateme/
This is the movingball which just needs to be installed (doesn't require signing).
http://research.nokia.com/files/MovingBall_Example.sisx
Nokia N95
V 20.0.015
0546553

What is the use of CTU_PRAMS in bdc programming?

what is the use of CTU_PRAMS in bdc programming?
can any explain wit a sample code.

Hi,
Hi,
If u write table control bdc program in 14'' monitor screen, then if the same program u run at different monitor size, then the screen resolution problem comes in to the picture,
like, u get 5 records in table control in one screen, and some other records in other screen, to avoid this screen resolution problem we use CTU-PARAMS Structure.
In ur program u have to set
defsize type ctu_params-defsize value 'X',
Then u will be free of screen resolution problem.
Fill the str CTU_PARAMS-defsize = 'X' and pass in CTU stmnt as
call transaction 'XXX' options using t_bdcdata ctu_params.
Analysing :
1. If nothing works, then we have to
some ifs & buts.
2. There shall be normally
2-4 different kinds of resolution
on various users comptuers.
3. Based on this,
we have to know beforehand,
what will be the number of rows
in the table control.
4. The user can be given
a selection/paraemter
for resolution
eg. 800x600
1024x100
axb
etc.
5. Based on this, we will hardcode
in the program (based upon our knowledge/recording
which we have seen and done)
we will hardcode
the number of lines
in the VARIBLE.
6. Then we can simply use this variable
for our LOOP and logic purpose.
7. It will be the responsibiltiy of the
use to CHOOSE THE CORRECT resolution,
on the selection-screen.
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data

What is the use of GUI status in Dialog programming

what is the use of GUI status in Dialog programming,, how can it be used there,, as screen are alredy defined..

Hi,
The use of GUI Status is that when we have to change some thing in Menu Bar, Toolbar and Function Keys. Say For Example we have to create any Custom Button in the application toolbar etc.
It can be used in Dialog Programming via defining the Status in the PBO module of the screen.
eq. created a screen 9000
          on clicking it->
                               PROCESS BEFORE OUTPUT.
                                         MODULE status_9000.
On double clicking on this "Module status_9000" - you can write "SET PF-STATUS 'STATUS_9000'".
Now u can create GUI staus with name "'STATUS_9000'".
Let me know in case you have any further doubts.
Thanks

What is the best disk cleanup program to use for my macbook pro?

what is the best disk cleanup program to use for my macbook pro? i've heard about MacKeeper but i dont want to risk downloading anything that might harm my computer. i just need excess files & such cleared and my computer harddrive cleaned up!

DO NOT USE MACKEEPER! If you feel you must have a "cleaner" try ONYX www.macupdate.com/app/mac/11582
https://discussions.apple.com/docs/DOC-3353
Credits to ds store.

What is the use of Tcode: SM35

Hi Experts,
What is the use of Tcode: SM35
If some one can brief me in detail it would be great help.
Appreciate your early response.
Regards
Rajesh

Hi Rajesh,
SM35 is used to run Batch input sessions.
These sessions can be created via LSMW or any batch-input ABAP program.
To run a session, select the session and press "Process".
You can either process foreground (as if you are entering the data), display errors only (runs in background as far as there is no error), background (you need to check the errors when the session is over).
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Dec 16, 2009 4:19 PM

What is the use of fox formula in integrated planning

what is the use of fox formula in integrated planning

Hi,
just as a follow up - the FOX Extension Formula capability of the IP in BW is as others have mentioned - to help develop formulas to execute calculations during planning, forecasting, budgeting, etc. - it allows consultants, like myself, to develop these formulas without the help of an ABAP consultant - but creates ABAP programs behind the scenes.
You can also use these ABAP programs separate from the IP component - once you create a FOX formula you can retrieve the ABAP program and then use it for other activities.
With the FOX you can use variables in a formula, call another ABAP program, generate loops of data both master and transactional, allows IF, THEN statements, and a number of other activiities. There is a limit to the usefulness of the FOX formula process - you may find if the FOX formula is too complex or long that your process will run slowly during the calculations. If this is occurring you will need to debug your ABAP program to see if you can increaase the performance.
Thanks and hope this helps, Pete

What is the use of t-rfc in ALE? compared to t-rfc, Qrfc is better and effi

what is the use of t-rfc in ALE? compared to t-rfc, Qrfc is better and efficient?

Hi Sunil,
These are the types of RFC
Asynchronous RFC (aRFC)
Synchronous RFC (sRFC)
Transactional RFC (tRFC)
Queued RFC (qRFC)
Parallel RFC (pRFC)
Asynchronous RFC :
This is used when you need to increase the performance of ABAP program by having system call more than one function module in parallel than forcing the program to wait for results .
Transactional RFC
This let you group one or more function module call together o tRFC LUW and ensure that fucnction module within LUW is called once . In contrast to aRFC and sRFC the tRFC belonging to tRFC LUW are executed in order .
tRFC is always used if a function is executed as a Logical Unit of Work (LUW). Within a LUW, all calls are
1.Executed in the order in which they are called
2.Executed in the same program context in the target system
3.Run as a single transaction: they are either committed or rolled back as a unit.
Implementation of tRFC is recommended if you want to guarantee that the transactional order of the calls is preserved
Asynchronous remote function calls (aRFCs) are similar to transactional RFCs, in that the user does not have to wait for their completion before continuing the calling dialog. There are three characteristics, however, that distinguish asynchronous RFCs from transactional RFCs:
When the caller starts an asynchronous RFC, the called server must be available to accept the request.
The parameters of asynchronous RFCs are not logged to the database, but sent directly to the server.
Asynchronous RFCs allow the user to carry on an interactive dialog with the remote system.
The calling program can receive results from the asynchronous RFC.
You can use asynchronous remote function calls whenever you need to establish communication with a remote system, but do not want to wait for the functions result before continuing processing. Asynchronous RFCs can also be sent to the same system. In this case, the system opens a new session (or window). You can then switch back and for between the calling dialog and the called session
RECEIVE RESULTS FROM FUNCTION Remotefunction is used within a FORM routine to receive the results of an asynchronous remote function call. The following receiving parameters are available:
IMPORTING
TABLES
EXCEPTIONS
The addition KEEPING TASK prevents an asynchronous connection from being closed after receiving the results of the processing. The relevant remote context (roll area) is kept for re-use until the caller terminates the connection.
Hope this resolves your query.
Reward all the helpful answers.
Regards

What is the use of Marker Interfaces?

What is the use of marker interfaces?
As it is not having any methods or fileds what is the benefit I will get by implementing those interfaces?
Servlet implements SingleThread
What it will do behind the scenes exactly as singleThread model is marker interface

The use of marker interfaces is to act as markers (shock horror)
It is quite a common way to tell a program what a class can/can't do: Cloneable, Serializable etc etc
This doesn't change the functionality of the class itself, but is more an indication as to what can be done with this class.
In this case the servlet container can then tell whether or not it implements the interface, and can treat it accordingly. Implementing this interface tells the container you want it to run this servlet in singleThreaded mode.
Thats all there is to it.
It would be along the lines of
Servlet servlet = loadServlet("...")
if (servlet instanceof SingleThreadModel){
// Single threaded servlet - start new process for it
else {
// regular servlet - reuse existing object.

What is the use of variant in the alv report

hello all,
what is the use of variant in the alv report

Hi,
For Variants
follow the link:
http://help.sap.com/search/highlightContent.jsp
Variants allow you to save sets of input values for programs that you often start with the same selections. You can use them for any programs except subroutine pools (type S).
Contents
Variants: Overview
Initial Screen
Displaying a Variant Overview
Creating and Maintaining Variants
Creating Variants
Attributes of Variants
Changing Variants
Deleting Variants
Printing Variants
Variable Values in Variants
Creating Variables for Date Calculations
User-specific Selection Variables
Creating User-specific Variables
Changing Values Interactively
Changing Values from the Program
Fixed Values from Table TVARV
Creating Table Variables from TVARV
Changing TVARV entries
Running a Program with a Variant
Variants: Overview
Use
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, see Working with selection screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant.
You can create any number of variants for any program in which selection screens are defined. Variants are assigned exclusively to the program for which they were created.
You can also use variants to change the appearance of the selection screen by hiding selection criteria. This is particularly useful when you are working with large selection screens on which not all of the fields are relevant.
Reports, module pools, and function groups may have several selection screens. It is therefore possible to create a variant for more than one selection screen.
Variants are an interface between the user and the selection screen. They can be used both in dialog and in background mode, although their uses are slightly different.
Variants in Dialog Mode
In dialog mode, variants make things easier for the user, since they save him or her from continually having to enter identical values. They can also make the selection screen easier to read, because you can use them to hide input fields. Running an executable program with a variant containing an optimal set of values also reduces the capacity for user error. The optimized database selections speed up the runtime of the program.
Variants in Background Mode
Variants are the only method for passing values to a report program in a background job. Therefore, when you run a program in the background, you must use a variant (or SUBMIT... VIA JOB). To avoid you having to create a new variant each time you run the report, ABAP contains a mechanism allowing you to pass variable values to variants. See variable values in variants.
To ensure that an executable program is always started using a variant, you can specify in the program attributes that the program may only be started in this way.
Features
Creation of variants
Display, change, copy, print, and delete variants
Use and definition of variables in variants
Variable date calculation
User-specific fixed values
Fixed values in table TVARV
You access the variant maintenance tool from the initial screen of the ABAP Editor. Enter the name of the program, select Variants in the Sub-objects group box, and then choose Display or Change.
Functions
The above screen allows you to:
Create variants
Display the variant directory
Display and change values and attributes
Copy, delete, and rename variants
Before creating a new variant for a program, you should check whether you can use or adapt an existing variant instead.
There are two ways to display variants:
Position the cursor on the Variant field on the initial screen and press F4. The following dialog box lists all of the available variants:
Choose Variants ® Directory on the initial screen:
Creating Variants
Prerequisites
You must have defined one or more selection screens for the relevant program. The program may have any type except type S.
Procedure
On the initial screen of the ABAP Editor, enter the name of the program for which you want to create a variant, select Variants in the Sub-objects group box, and choose Change.
On the variant maintenance initial screen, enter the name of the variant you want to create.
Note the naming convention for variants (see below).
Choose Create.
If the program has more than one selection screen, a dialog box appears in which you can assign the variant to one or more screens. The dialog box does not appear if the program only has one selection screen. In this case, the selection screen of the program appears straight away.
If there is more than one selection screen, select the screens for which you want to create the variant.
Example:
If you choose Variant for all selection screens, the variant also applies to any selection screens that you create after creating the variant.
Otherwise, the variant only supplies values to the selection screens that you select in the list.
Choose Continue.
The (first) selection screen of the program appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them. If you keep scrolling forwards, the Continue button appears on the last selection screen.
Enter the required selections, including multiple and dynamic selections.
Choose Continue.
Result
When you have finished, an overview screen appears (ABAP: Save Attributes of Variant), on which you can enter the attributes of your variant and save it.
Note that when you create a new variant, you must enter both values and attributes.
Names of variants: Names can consist of up to 14 alphanumeric characters. The "% " character is not allowed. If you want the variant to be transported automatically with its program, you must create a system variant. The name of a system variant starts "CUS&" for customers, and "SAP&" for SAP system variants. You can only use the "&" character within this prefix in the name of a system variant. It may not occur in any other context. System variants are administered by the Workbench Organizer. Although you can create and access variants from any client, they are always stored in client "000".
Creating Variants
Prerequisites
You must have defined one or more selection screens for the relevant program. The program may have any type except type S.
Procedure
On the initial screen of the ABAP Editor, enter the name of the program for which you want to create a variant, select Variants in the Sub-objects group box, and choose Change.
On the variant maintenance initial screen, enter the name of the variant you want to create.
Note the naming convention for variants (see below).
Choose Create.
If the program has more than one selection screen, a dialog box appears in which you can assign the variant to one or more screens. The dialog box does not appear if the program only has one selection screen. In this case, the selection screen of the program appears straight away.
If there is more than one selection screen, select the screens for which you want to create the variant.
Example:
If you choose Variant for all selection screens, the variant also applies to any selection screens that you create after creating the variant.
Otherwise, the variant only supplies values to the selection screens that you select in the list.
Choose Continue.
The (first) selection screen of the program appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them. If you keep scrolling forwards, the Continue button appears on the last selection screen.
Enter the required selections, including multiple and dynamic selections.
Choose Continue.
Result
When you have finished, an overview screen appears (ABAP: Save Attributes of Variant), on which you can enter the attributes of your variant and save it.
Note that when you create a new variant, you must enter both values and attributes.
Names of variants: Names can consist of up to 14 alphanumeric characters. The "% " character is not allowed. If you want the variant to be transported automatically with its program, you must create a system variant. The name of a system variant starts "CUS&" for customers, and "SAP&" for SAP system variants. You can only use the "&" character within this prefix in the name of a system variant. It may not occur in any other context. System variants are administered by the Workbench Organizer. Although you can create and access variants from any client, they are always stored in client "000".
reward all help full answers

What is the use of varients in sap?

what is the use of varients in sap?

hi,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant.
You can create any number of variants for any program in which selection screens are defined. Variants are assigned exclusively to the program for which they were created.
You can also use variants to change the appearance of the selection screen by hiding selection criteria. This is particularly useful when you are working with large selection screens on which not all of the fields are relevant.
Reports, module pools, and function groups may have several selection screens. It is therefore possible to create a variant for more than one selection screen.
Variants are an interface between the user and the selection screen. They can be used both in dialog and in background mode, although their uses are slightly different.
Variants in Dialog Mode
In dialog mode, variants make things easier for the user, since they save him or her from continually having to enter identical values. They can also make the selection screen easier to read, because you can use them to hide input fields. Running an executable program with a variant containing an optimal set of values also reduces the capacity for user error. The optimized database selections speed up the runtime of the program.
Variants in Background Mode
Variants are the only method for passing values to a report program in a background job. Therefore, when you run a program in the background, you must use a variant (or SUBMIT... VIA JOB). To avoid you having to create a new variant each time you run the report, ABAP contains a mechanism allowing you to pass variable values to variants. See Variable Values in Variants.
To ensure that an executable program is always started using a variant, you can specify in the program attributes that the program may only be started in this way.
report variants
Definition
Group of selection criteria that has been saved. A report can have several different variants, with each variant retrieving different types of information. For example, a vendor report might have one variant for U.S. vendors and another variant for European vendors.
Use
Instead of entering the same values in the selection criteria input fields each time you execute a report, you can enter the values once and then save the selection criteria as a variant. The next time you execute the report, you only need to enter the variant name, not the selection criteria. If you use variants, the selection criteria screen is already filled with data.
To execute certain reports, you must use a variant. In this case, a system message prompts you to do so. Although you are not always required to use variants or selection criteria, it is a good idea to use them when possible. Your resulting lists will be smaller and take less time for the system to process.
reward points if helpful,
shylaja

What is the use of COMMIT in BDC?in what situation we can use it?

what is the use of COMMIT in BDC?in what situation we can use it?

Hi sunil,
Function modules that run in the update task can run synchronously or asynchronously. You determine this by the form of the commit statement you use:
COMMIT WORK
This is the standard form, which specifies asynchronous processing. Your program does not wait for the requested functions to finish processing.
COMMIT WORK AND WAIT
This form specifies synchronous processing. The commit statement waits for the requested functions to finish processing. Control returns to your program after all high priority (V1) function modules have run successfully.
The AND WAIT form is convenient for switching old programs to synchronous processing without having to re-write the code. Functionally, using AND WAIT for update-task updates is just the same as dialog-task updates with PERFORM ON COMMIT.
regards,
keerthi

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

What is the use of Serializable Interface in java?

Hello friends,
I have one dout and i want to share with u guys:
Why Serializable interface made and actully
what's the use of it?
At which place it become useful ?
It is not contain any method then why it is made?
If anyone have any idea about this then please reply.
Thanks in advace
Regards,
Jitendra Parekh

t is not contain any method then why it is made?To point out to the user of a class (and the programs) that the design of this class is conforming to certain restraints needed for Serialization.

What is the use of HTTPS 8181 port

Hi,
I am wondering what is the use of the port 8181 on the EE5 application server.
the second question. Why the application server open so many port on the same local machine. I agree that for security raison it is a good idea. But does application serveur use tcp connection to communicate between the server thread ?
So it is possible to add a thread in the serveur application to process some internal work. And of course it is possible to include this new thread in the communication process of the server ?
Can we have the map of all the tcp trhead use by the server application.
Regards
Herve Terrolle.

Your app has to run as root to listen on ports up to 1024,
also, some other app (apache?) may already be listening on port 443.
AFAICT port 8181 is just arbitrarily chosen, it might as well have been port 4430, or any other free port above 1024.

What is the use of Running Program RMBWV3nn in SE38...?

Similar Messages

Maybe you are looking for