What is the use of switch control ?

when i go to switch control and add a new switch as screen tap. then i enable the switch control. what is the use of that? every time i tap i get the app switcher(multi task) which is good but to go to a certain app i have to tap home button 3 times. i dont know if im wrong. but in switch control i can add gestures but cannot find a way to use it. (simply if i can add special gesture like a swipe with 3 fingures and if i can get multitasker or siri or any other program it will be very use ful isn't it?)

Read these:
http://support.apple.com/kb/HT5886
User guide:
iOS 7 Switch Control - Technical Solutions Australia
http://bdmtech.blogspot.com.au/2013/09/new-in-ios-7-detailed-look-at-switch.html

Similar Messages

What is the use of table control in bdc is it same in module pool table con

Hi,
What is the use of table control in bdc is it same in module pool table control?
regards
eswar

Hi,
Table control means it contains as table and it will scroll in vertical and horizontal.
In module pool by using screen we can create new table control.
But BDC table control means here we can populate the data into the table control.
i.e.if you take VA01 for sales order creation in the belwo of VA01 screen there is table control for the filling of material details so here we will write the code to populate the data into the table control screen.
Thanks and regards,
shyla

What are the uses of table control and tabstrip control

can anyone tell me the uses of table control and tabstrip control

Hi,
table control is more comfortable for customizing.scroll bars all possible in this.where as it is not possible in step loops.
check this example.
PROGRAM ZBHTCTRL.
TABLES: LFA1, EKKO.
DATA: OKCODE1 LIKE SY-UCOMM,
OKCODE2 LIKE SY-UCOMM.
CONTROLS TABC TYPE TABLEVIEW USING SCREEN 1001.
DATA: BEGIN OF ITAB OCCURS 0,
MANDT LIKE EKKO-MANDT,
EBELN LIKE EKKO-EBELN,
BSTYP LIKE EKKO-BSTYP,
BSART LIKE EKKO-BSART,
END OF ITAB.
MODULE USER_COMMAND_1000 INPUT.
CASE OKCODE1.
WHEN 'BACK'.
SET SCREEN 0.
WHEN 'NEXT'.
SET SCREEN 1001.
SELECT * FROM EKKO INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE
LIFNR = LFA1-LIFNR.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
MODULE MOVE_DATA OUTPUT.
EKKO-MANDT = ITAB-MANDT.
EKKO-EBELN = ITAB-EBELN.
EKKO-BSTYP = ITAB-BSTYP.
EKKO-BSART = ITAB-BSART.
ENDMODULE. " MOVE_DATA OUTPUT
MODULE USER_COMMAND_1001 INPUT.
CASE OKCODE2.
WHEN 'BACK'.
SET SCREEN 1000.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 OUTPUT
MODULE STATUS_1001 OUTPUT.
SET PF-STATUS 'MENU'.
SET TITLEBAR 'TIT'.
ENDMODULE. " STATUS_1001 OUTPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'DMENU'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_1000 OUTPUT
FORM ON_CTMENU_FORM1 USING CMENU TYPE REF TO CL_CTMENU.
CALL METHOD CMENU->LOAD_GUI_STATUS
EXPORTING
PROGRAM = ' ZBHTCTRL'
STATUS = 'CMENU'
MENU = CMENU.
CALL METHOD CMENU->ADD_FUNCTION
EXPORTING
FCODE = 'RX'
TEXT = 'RECIEVE'.
ENDFORM.
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1000.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1001.
LOOP AT ITAB WITH CONTROL TABC CURSOR TABC-TOP_LINE.
MODULE MOVE_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1001.
LOOP AT ITAB.
ENDLOOP.
for more info check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
thanks
Ashu.

HT1586 What's the best HDMI switcher to use for Apple TV?

What's the best HDMI switcher to use for Apple TV? My widescreen TV has only one HDMI outlet and it is in use.
Thanks,
Joanna

Anyone sold by MONOPRICE.COM are really worth buying!

What is the use of control breaks in reoprts?how can we use them in report?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

hi,
check this sample program using control break statements.
*& Report Y777_CBSTABLE
REPORT Y777_CBSTABLE1.
TYPES:
BEGIN OF S_MARKS,
     ROLLNO    TYPE I,
     SCODE(3) TYPE C,
    ROLLNO    TYPE I,
     SNAME(10) TYPE C,
     MARKS     TYPE I,
END OF S_MARKS.
DATA : C TYPE I,
       D(3) TYPE C,
       TOT TYPE I,
       STU TYPE I,
       MARKS TYPE STANDARD TABLE OF S_MARKS,
       WA_MARKS TYPE S_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 65.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 85.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 90.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 55.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 75.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 80.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
RETRIVAL ************************************
SORT MARKS BY SCODE .
LOOP AT MARKS INTO WA_MARKS.
    AT FIRST .
       ULINE.
       FORMAT COLOR 6 ON.
       WRITE:/ 'SUBJECT CODE', 65 ' ' .
       FORMAT RESET.
       FORMAT COLOR 6 ON INTENSIFIED OFF.
       WRITE:/20 'ROLL NO',
              40 'SUBJECT NAME',
              55 'MARKS',
              65 ' '.
       FORMAT RESET.
       ULINE.
    ENDAT.
    ON CHANGE OF WA_MARKS-SCODE.
       IF SY-TABIX NE 1.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
       ENDIF.
      FORMAT COLOR 6 ON INTENSIFIED ON.
      WRITE:/ WA_MARKS-SCODE.
      FORMAT RESET.
    ENDON.
    FORMAT COLOR 6 ON INTENSIFIED OFF.
    WRITE:/20 WA_MARKS-ROLLNO,
           40 WA_MARKS-SNAME,
           55 WA_MARKS-MARKS,
           65 ' '.
    FORMAT RESET.
    STU = STU + 1.
    TOT = TOT + WA_MARKS-MARKS.
    C = STU.
    AT LAST.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
         ULINE.
         FORMAT COLOR 6 ON INVERSE ON INTENSIFIED ON.
         WRITE:/ ' TOTAL STUDENTS : ', C.
         FORMAT RESET.
    ENDAT.
ENDLOOP.
reward points if hlpful.

What is the use of control breaks in reoprts? and how can we use them?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

use F1 on AT in a program.
You get this
Control break with extracts
- AT NEW f.
- AT END OF f.
- AT FIRST.
- AT LAST.
- AT fg.
Control break with internal tables
- AT NEW f.
- AT END OF f.
- AT FIRST.
- AT LAST.
Each of these have a link to explain in detail what you are asking.

What is the use of COMMIT in BDC?in what situation we can use it?

what is the use of COMMIT in BDC?in what situation we can use it?

Hi sunil,
Function modules that run in the update task can run synchronously or asynchronously. You determine this by the form of the commit statement you use:
COMMIT WORK
This is the standard form, which specifies asynchronous processing. Your program does not wait for the requested functions to finish processing.
COMMIT WORK AND WAIT
This form specifies synchronous processing. The commit statement waits for the requested functions to finish processing. Control returns to your program after all high priority (V1) function modules have run successfully.
The AND WAIT form is convenient for switching old programs to synchronous processing without having to re-write the code. Functionally, using AND WAIT for update-task updates is just the same as dialog-task updates with PERFORM ON COMMIT.
regards,
keerthi

What is the use of TCode: OOSE

Hi,
Can i know what is the use of TCode: OOSE
Where i can see a list of entries, let me know what is the use of these option.
When we would be using it.
Regards
Rajesh

Hi Rafiqh,
Thanks for your quick response.
What do you mean by switch, if you can provide me with some example it would be gr8.
Appreciate your early response.
Regards
Rajesh

How to make the dblink and what is the use of this

plz any body tell me "how to make the dblink and what is the use of this"
sujit

Do you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed.

What is the use of block step in BPM? Please help!

Hi Experts,
I would like to know what is the use of block step in BPM? In what cases we can use it?
Can somebody explain BLOCK by relating to any programming language ( java) control step?
Please help!
Thanks
Gopal

Hi,
Block step is similar to what we use curly braces in most of the languages which defines the scope. For example if we are using loop step in bpm to loop through some variable then we can use block step to restrict the scope of loop step up to some point.
Thanks and Regards,
Sudheer.

What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI?

Expects...
What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI
Accounting> Financial Accounting> General Ledger> Corrections> FAGLCOFIFLUP - Post CO Documents to FI
Thanks & Regards
Bhagiradha.P

Hi,
The real-time integration of Controlling with Financial Accounting was active at the time the CO documents were posted.
CO documents could be not transferred to financial accounting on behalf of errors which are only known to occur in the following situations:
- During mass processing such as internal CO assessments or distributions
- Manual posting of individual CO documents is not possible if errors occur in financial accounting.
- If real-time integration was not active when the CO document was posted, you must use the report FAGL_COFI_TRANSFER_CODOCS to transfer these CO documents to financial accounting because they are not in the worklist.
Regards,
Eli

What is the required hardware to control AMC servo amplifier model 30A20AC?

Hi everybody,
What is the required hardware to control "Advanced Machine Controls" servo amplifier Series 30A-AC, model 30A20AC?
The interface hardware should connect to a laptop, and run in real-time.
Tnank you

Hi Nkhbeik,
I went to ni.com/motion >> choose NI Motion Hardware. I then filtered out the hardware that did not support Real-Time by clicking on Real-Time on the left hand side of the page. There are a number of results returned. Depending on how many axis you need, you can filter the results further. Any of the results can be used with the appropriate connector, either a cRIO chassis (for the 9505), a PXI Chassis (for PXI formfactor), or a PCI Extension device for a PCI card. I hope this helps!
Kristen H.
Message Edited by Kristen H. on 06-08-2009 01:22 PM

What is the Use of "Alter database activate standby database"

Hi ,
I appreciate your time.
I just wanted to know what is the use of "Alter database activate standby database" command when doing the failover. How different it will act in failover process. Can we use this command in SwitchOver.
Thanks in advance.

Hi Uwe Hesse,
Wonderfull... good info....
So my understanding is that the use of "ACTIVATE PHYSICAL STANDBY DATABASE" is conditional and depends on the redo log gap and the Database status(Able to mount or not).
Condition 1: If the Db is in Mount state and Redo log gap is successfully filled.
1) Flush any unsent redo from the primary database to the target standby database.
SQL> ALTER SYSTEM FLUSH REDO TO target_db_name;
Note: If the above Statement Completes successfully without any errors.
2) Stop Redo Apply.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
3) Finish applying all received redo data.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH;
4) Verify that the target standby database is ready to become a primary database.
SQL> SELECT SWITCHOVER_STATUS FROM V$DATABASE;
5) Switch the physical standby database to the primary role.
SQL> ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY WITH SESSION SHUTDOWN;
Condition 2: If the DB is not able Mount and Redo Gap can't be filled.
Important Note: If the the above command in STEP3 gives error, some received redo data was not applied. Try to resolve the cause of the error and re-issue the statement before proceeding.
If the error condition cannot be resolved, a failover can still be performed (with some data loss) by issuing the following SQL statement on the target standby database:
SQL> ALTER DATABASE ACTIVATE PHYSICAL STANDBY DATABASE;
Thanks in advance.

What is the use of CTU_PRAMS in bdc programming?

what is the use of CTU_PRAMS in bdc programming?
can any explain wit a sample code.

Hi,
Hi,
If u write table control bdc program in 14'' monitor screen, then if the same program u run at different monitor size, then the screen resolution problem comes in to the picture,
like, u get 5 records in table control in one screen, and some other records in other screen, to avoid this screen resolution problem we use CTU-PARAMS Structure.
In ur program u have to set
defsize type ctu_params-defsize value 'X',
Then u will be free of screen resolution problem.
Fill the str CTU_PARAMS-defsize = 'X' and pass in CTU stmnt as
call transaction 'XXX' options using t_bdcdata ctu_params.
Analysing :
1. If nothing works, then we have to
some ifs & buts.
2. There shall be normally
2-4 different kinds of resolution
on various users comptuers.
3. Based on this,
we have to know beforehand,
what will be the number of rows
in the table control.
4. The user can be given
a selection/paraemter
for resolution
eg. 800x600
1024x100
axb
etc.
5. Based on this, we will hardcode
in the program (based upon our knowledge/recording
which we have seen and done)
we will hardcode
the number of lines
in the VARIBLE.
6. Then we can simply use this variable
for our LOOP and logic purpose.
7. It will be the responsibiltiy of the
use to CHOOSE THE CORRECT resolution,
on the selection-screen.
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data

What is the use of confirmation tab in Purchase order ?

what is the use of confirmation tab in Purchase order?

Hello Balaji
In Purchasing, the term Confirmation is an umbrella term for various kinds of information provided by a vendor to a customer with regard to ordered goods.
Possible types of confirmation include the following:
Order acknowledgments
Loading or transport confirmations
Shipping notifications. (Note that shipping notifications may also be referred to by a number of other names, including "advice (note)", "advice of dispatch", "ship notice", and "advance(d) shipping notice" ("ASN").)
A further form of confirmation frequently used in Purchasing is the Inbound Delivery, which is created on the basis of an incoming shipping notification. The shipping notification represents a vendors confirmation to a purchasing organization of a delivery date for a certain quantity of ordered materials (or the date of performance of ordered services).
You can enter incoming vendor confirmations manually. Alternatively, you can receive them via EDI and have them processed automatically.
When working with vendor confirmations, you have the following options:
You can enter the order acknowledgment number if you simply wish to provide a basis for monitoring the receipt or non-receipt of acknowledgments.
You should enter the confirmed quantities and delivery dates if you wish to provide more detailed information in support of the purchasing, inventory management, and materials planning/control functions within your enterprise.
Regards

What is the use of switch control ?

Similar Messages

Maybe you are looking for