What must I do if there is no enough space on my disk?

Your system will slow down, may crash and refuse to boot if you run out of space. Remove files you no longer want or need. Start by emptying your trash, and check your Downloads folder - files tend to amass there. If you have a little bit of room, install Omnidisksweeper which will tell you where your largest files and folders are.
http://omnigroup.com/more
Make sure you absolutely have a backup - preferably Time Machine - to an external drive. This is vital.
Ultimately you may need to store some files (eg movies or other large files) on an external drive (NOT your backup drive) and connect it when you need to access those files. The Retina MBPs have SSDs rather than hard drives, which are more expensive, but OWC (macsales.com) has upgrades for most models if you absolutely need to have all your files on the computer.
Matt

Similar Messages

DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))

I constantly get these message on laptop backup, what actually does it mean?
DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))
I set automatic growth on protection group and there is plenty space.

Auto-grow Key Points
1.) Auto-grow needs to be enabled for the datasource.
2.) We grow the replica/recovery point volume by 10gigs or by 25% whichever is higher.
3.) To prevent race conditions, we do not grow within 15 minutes of the last growth.
http://social.technet.microsoft.com/Forums/ru-RU/6c70079e-6d90-42e2-89c4-9ddc7fcf11f4/dpm-2012-is-out-of-disk-space-auto-growth-does-not-work
https://blogs.technet.com/b/dpm/archive/2011/06/06/how-to-use-and-troubleshoot-the-auto-heal-features-in-dpm-2010.aspx
http://robertanddpm.blogspot.ru/2010/09/shrink-volumes-auto-grow.html
Have a nice day !!!

Write: 0xecf6eb0, 4096: There is not enough space on the disk.

Our applications occasionally get the error in the function specified by set_errcall: "[prefix] write: 0xecf6eb0, 4096: There is not enough space on the disk. " Preceded by "DB00.db: write failed for page"
There most certainly is enough space on disk for one. In this most recent case, the Db::put's succeeded for a full hour before finally failing with an out of space error. At which point, I now have 30 log files and my own log files are filled with Berkeley error callbacks.
How come the set_errcall doesn't return an integer error code? If it did, we would be able to analyze that and decide any action to take. In this example, I might consider closing down all handles and checkpointing then removing logs since maybe the number of logs has gotten to large. Analyzing a string doesn't make sense since that might change with Berkeley versions.
Anyway, can anyone give any advice as to why we would get an out of space error (with plenty of disk space.) And also how to handle such an error.
Edited by: AMARCIONEK on Jun 3, 2009 10:10 AM

The platform is C++ API version 4.7.25 running on Windows Server 2003 Enterprise SP2. The database is on an NTFS disk. We have tested database files up to 20GB in size. The following is my config.
m_pDbEnvironment->set_cachesize(0, 10 * 1024 * 1024, 1);
m_pDbEnvironment->set_lg_max(20000000);
m_pDbEnvironment->set_lg_bsize(10 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_write(4, 0);
m_pDbEnvironment->set_mp_mmapsize(2 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_openfd(1);
// set the alloc methods into the environment
m_pDbEnvironment->set_alloc(QPRT_ALLOC, QPRT_REALLOC, QPRT_FREE);
m_pDbEnvironment->set_lk_detect(DB_LOCK_YOUNGEST);
m_pDbEnvironment->set_timeout(500000, DB_SET_LOCK_TIMEOUT);
m_pDbEnvironment->set_timeout(200000, DB_SET_TXN_TIMEOUT);
m_pDbEnvironment->set_flags(DB_REGION_INIT, 1);
m_pDbEnvironment->set_tx_max(5000);
m_pDbEnvironment->set_flags(DB_TXN_WRITE_NOSYNC, 1);
m_pDbEnvironment->log_set_config(DB_LOG_ZERO, 1);
m_pDbEnvironment->set_lk_max_lockers(5000);
m_pDbEnvironment->set_lk_max_locks(5000);
m_pDbEnvironment->set_lk_max_objects(5000);
m_pDbEnvironment->open((zKSz)sPath,     DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL |
                                   DB_THREAD | DB_INIT_TXN | DB_RECOVER | DB_LOCKDOWN,
                                   0);
We also checkpoint every 2 to 5 minutes with a 5MB threshold. We also explicitly call pDbEnvironment->log_archive(kpNil, DB_ARCH_REMOVE) after checkpointing.
Primary and (up to 4) secondary databases are opened with DB_CREATE | DB_AUTO_COMMIT flags.
I'd also appreciate any suggestions as to how to lower the memory footprint used by Berkeley. Ever since we've integrated this DB, our memory usage has been too large and inconsistent. There are 6 independent environments the product uses during runtime. Each of these environments have a primary database and (up to 4) secondary databases, which are all opened with DB_CREATE | DB_AUTO_COMMIT flags.
Just recently we have added a memp_trickle every 5 seconds at 40% (Anything lower and it has no affect in the environment, in other words, db_stat shows dirty pages forced from the cached instead of trickled.) We are trying to reproduce this issue at this point.

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

Error: The Operation Could Not Be Completed. There Is Not Enough Space on The Disk

Hi folks,
I'm running Win7, CS5.
The specs for the situation are as follows.
Trying to Liquify a 419 mb (645 scan) .tif file. *Thing to note* Liquify loads slowly no matter what the file size, it seems to get caught while loading around the 7th block. However, about 5-8 actions in, the error occurs and I can go no further with liquify.
The computer.
OS and CS5, booting from my Crucial 128GB SSD with 33.9 gb free space.
16GB Ram
A total overkill 2TB of Striped Raid Scratch disk space - I see the temp file does write here, and the drive is otherwise empty. All drives are NTFS formatted.
I'm usually running a bunch of other programs, at the very least, lightroom, and firefox/chrome.
The Raid is my sole scratch disk, and the requisite box in my performance tab is checked.
There are, admittedly, gaps in my computer knowlege. But this is more than enough computer to handle a file of that size.
Can someone enlighten me as to what may be going on?
Thank you so much,
Ron.

You could try this:
Assuming your scratch drive is D:...
1. Make a folder D:\TEMP. Make sure your username has Full Control privileges.
2. Edit your environment variables so that your TEMP and TMP environment variables both contain the string: D:\TEMP
-Noel

I have an ipod touch 5th generation, bought a new laptop and authorised it. when i try to sync it says it's not possible because there isn't enough space to hold everything in the itunes library.it won't give me the option of choosing what i want to sync.

I have an ipod touch 5th generation 64g . Just bought a new laptop and authorised it to use itunes library. When i try and sync my ipod it says it can't do it because there isn't enough space on my ipod to hold everything in the itunes library. I already know that i can't fit everything on my ipod but when using my old laptop i was able to choose what i wanted to sync. Now i don't seem to have the option of choosing what i can sync, it just refuses to do it as there isn't enough space. Why is this???

Hello, peppertwist.
Thank you for visiting Apple Support Communities.
When receiving the not enough space alert, he is the best article to go through.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
Jason H.

What to do when you want to restor your ipod but it says there is not enough space to do it ?

My problem is that i have 21go of the section "others" on my iPod 5. So, I went on internet to find what is the solution (or what to delete to get more space on my iPod), and I found that it was a problem to have more than 5go of "others", and that the only solution was to restor it. My second problem is that I can't even restor it because it says there is not enough space to do it. So, I deleted stuff and there is now 4.73go of free space. But it still says that there is not enough space to restor it !!!

No, it says that i don't have enough space on my iPod ;$ But it's ok now, I went on youtube to find a way to restore an iPod (http://www.youtube.com/watch?v=Jzyy4puapig). But thank you for trying to help me !!

TS3992 My IPad states I have 4.1 GB available out of 5, but my IPad will not backup, says there is not enough space. What should I so.

My IPad states I have 4.1 GB available out of 5, but my IPad will not backup, says there is not enough space. What should I do?

You are looking at the amount of storage that you have available on the actual iPad (Settings > General > About > Available) and not the amount that you have in the cloud (Settings > iCloud) ?

TS3694 trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do?

trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do? - Help cos I've lost my contacts!!!!!

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

My 5 year old MacBook Air is telling me it "cannot save information about your mailboxes because there isn't enough space in your home folder. Quit mail, delete files you don't need, then reopen mail." What is "home folder," and which files to delete?

My 5 year old MacBook Air is telling me it "cannot save information about your mailboxes because there isn't enough space in your home folder. Quit mail, delete files you don't need, then reopen mail." What is "home folder," and which files to delete? Thanks.

The home folder is where all of your personal files are kept.
Best candidates to delete are movies, videos, music and photos since they generally take the most space.
Don't forget to empry the Trash after you delete the file because the space is not returned until the Trash is emptied.
Allan

My Lacie external hard drive will not back up on Time Machine. Says there's not enough space. This has happened with every single external I've purchased. Thought TM was supposed to delete old backups??

My Lacie External backed up on Time Machine after the first back up but now says there's not enough room. I thought TM deleted old back ups to save new versions. What am I doing wrong. This happens to me constantly. Every single external hard drive I've purchased for the MacBook Pro (5 of them) has not worked either initially or at the second back up. It either isn't formatted properly so I have to go to Genius bar to help me set up for the first back up, or after the first back up, it says there's not enough space and I have to go back to Genius Bar. Is there a way I can fix this on my own?

I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM.

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!!

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?

Thanks for your reply!
I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
My apple warranty is over and I have to pay them to get some help over the phone!

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4623 I lost my apps and iTunes after a restore, but it says there isn't enough space on the iPhone 4. How do I know how much space needs to be freed up? I keep deleting photos and videos, but I'm still getting the same message.

I did an iphone 4 software update. It then asked me to do a "restore" in order for me to be able to use the latest iTunes. I did a "restore" to "factory settings" (this was the only option listed) thinking I'd be able to sync later and get everything back and ended up losing all my purchased apps and iTunes. When I open iTunes, "Welcome to your new iphone" and it says I can re-do the "restore" and choose my lastest update. I assume this will give me back my apps and iTunes. When i choose to do this, it says there isn't enough space on the iPhone. How do I know how much space needs to be freed up? I keep deleting photos and videos from the phone, but I'm still getting the same message every time I re-try. I don't want to delete everything, but I don't know what to do...? Thanks!

Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

Having problem with iPad sync getting pop up message as below. The iPad cannot be synced because there is not enough space to hold all of the items in the iTues library (additional 10.03 GB required). There is enogh space be it in PC or on iPad.

Having problem with i Pad sync getting pop up message as below. The i Pad cannot be synced because there is not enough space to hold all of the items in the iTunes library (additional 10.03 GB required). There is enough space be it in PC or on i Pad. Why and What can be done to resolve, please advice appreciate. Thanks

It generally means - just using random numbers for examples - the iTunes on your computer holds 45 gig of content, you have a 16 gig iPad which has 13 gig of free space and the content just won't fit.
Easy solutions. go into iTunes and 'manually manage' your content. I believe this is in the main summary tab for your device (connect your device, click on the icon in iTunes to access controls for your iPad
You may also need to choose to manually control content in both the music and movie tabs.
Apple - Support - Manuals
the manual will have more specific info for syncing and controlling content

What must I do if there is no enough space on my disk?

Similar Messages

Maybe you are looking for