What's the difference between batch class type 022 and 023?
Hi Guys,
I find that some of my SAP client only have class 022 and some have 023, but no client has them all. I don't know why it happed.
So what's the difference between batch class type 022 and 023? Which setting decide which class to be used ?
Thanks.
Hi nitin,
Read http://www.sapfans.com/forums/viewtopic.php?t=212819&highlight=022 you will know the difference between 022 and 023 .
Use tcode OMCT you can switch batch level .
Similar Messages
-
The difference between batch class type 022 and 023
what's difference between batch class type 022 and 023? 023 is described as standard batch class type, but there is only 022 type exists in my system. can i use 022?
Hi,
both classes mean the same, but which class is used is decieded by batch level. In case of material level or client level the system use automatically only class 023. If you define batch level to plant the system use automatically class 022.
Regards,
Abhee. -
What is the difference between document class and normal class
Hi,
Please let me know what is the difference between document class and normal class.
And I have no idea which class should call as document class or call as an object.
Thanks
-Actionscript Developerthe document class is invoked immediately when your swf opens. the document class must subclass the sprite or movieclip class.
all other classes are invoked explicitly with code and need not subclass any other class. -
What is the difference between Leave & Absence Type.
Hi Experts,
What is the difference between Leave & Absence Type.
if so What are the configuration steps need to be maintained for Leave Types.
Thanks in Advance.
Regards
Rajeshyour talking abt 0005 leave entitlements right
as far as i know that is not being used right now
for maintain the absence type
Check the node TM>Manageing time accounts and Recording
there check Absence type and Absence Quota type
and check the previous threads you will get lot of threads relating to this issue -
[I previously posted this question in another thread as hadn't realised how to post new question]
Q. What is the difference between component (Y, Pb, Pr) and component (R,G,B) ?
I’d previously thought I was reasonably savvy on all things HD, but when I turned my thoughts to looking into getting a mac mini to run part of my home cinema I realise I have some confusions around the above.
Here’s what I think I know:-
The mac mini has a DVI output of the type which can output both digital and analogue, and so via physical adapters it could be used to connect to displays that take HDMI or VGA style RGB leads.
I know on the market I can get a DVI to Component cable lead which would therefore lead me to assume it could drive my HD plasma with component input (Y,Pb,Pr), as I currently drive the HD TV via component cable with a SKY HD box (720p and 1080i), an xbox 360 (720p) and a progressive scan DVD player (480p), all through a Denon AV-amp.
The problem is, I’ve heard somewhere that the DVI to component is R,G,B only and that it is not Y, Pb, Pr which is making me wonder it a) this will work and b) if I really understand component video afterall.
I notice the Apple TV outputs Y,Pb,Pr but colours them red, green and blue, so am even more confused….
Hopefully someone can help educate me on this !Thanks for this.
My Plasma is a Panasonic 42" Viera March 2005 model. No HDMI, No VGA.
It can process signals up to 720p and 1080i via the component (an interestingly it makes a huge difference over SD even though the native panel is 480..!?!)
Am I right in thinking that the iPod component cable will also be R,G,B and therefor might be a suitable trial? Ie. if the TV accepts the input from the iPod then it should work for the mini?
Only other thing of note is I'm doing all this via my Denon 1707 AV amp which does have the facility of upscaling, but I imagine it needs to stick to one format?
Thanks. -
What is the difference between a tablespace, a segment and an extent ?
What is the difference between a tablespace, a segment and an extent ? Please explain in layman terms since I'm a total newbie to Oracle.
Regards
GonyHi,
These are logical structure of database
1. Tablespace : A database is divided into logical storage units called tablespaces, which group related logical structures together. For example, tablespaces commonly group together all application objects to simplify some administrative operations.
2.Segments
Above extents, the level of logical database storage is a segment. A segment is a set of extents allocated for a certain logical structure. The following table describes the different types of segments.
Segment Description
Data segment
Each nonclustered table has a data segment. All table data is stored in the extents of the data segment.
For a partitioned table, each partition has a data segment.
Each cluster has a data segment. The data of every table in the cluster is stored in the cluster's data segment.
Index segment
Each index has an index segment that stores all of its data.
For a partitioned index, each partition has an index segment.
Temporary segment
Temporary segments are created by Oracle when a SQL statement needs a temporary work area to complete execution. When the statement finishes execution, the extents in the temporary segment are returned to the system for future use.
Rollback segment
If you are operating in automatic undo management mode, then the database server manages undo space using tablespaces. Oracle Corporation recommends that you use "Automatic Undo Management" management.
3. Extents
The next level of logical database space is an extent. An extent is a specific number of contiguous data blocks, obtained in a single allocation, used to store a specific type of information. -
What is the difference between MOVE var1 TO var2 and var2 = var1? Help!
Hi Experts,
What is the difference between MOVE var1 TO var2 and var2 = var1?
Thanks
GopalGopal,
pls. look into it.Good explanation on you requirement.
To assign the value of a data object <f1> to a variable <f2>, use the following statement:
MOVE <f1> TO <f2>.
or the equivalent statement
<f2> = <f1>.
The contents of <f1> remain unchanged. <f1> does not have to be a variable - it can also be a literal, a text symbol, or a constant. You must always specify decimal points with a period (.), regardless of the users personal settings.
Multiple value assignments in the form
<f4> = <f3> = <f2> = <f1>.
are also possible. ABAP processes them from right to left as follows:
MOVE <f1> TO <f2>.
MOVE <f2> TO <f3>.
MOVE <f3> TO <f4>.
In the MOVE statement (or when you assign one value to another with the equal sign), it is not possible to specify the field names dynamically as the contents of other fields. If you need to do this, you must use field symbols .
There are three possible outcomes of assigning <f1> to <f2>:
The data objects <f1> and <f2> are fully compatible, that is, their data types, field length, and number of decimal places are identical. The contents of source field <f1> are transferred byte by byte into the target field <f2> without any further manipulation. The MOVE statement is most efficient when this is the case.
The data objects <f1> and <f2> are incompatible. This is the case, for example, if the two fields have the same type, but different lengths. The contents of the source field <f1> are converted so that they are compatible with the data type of <f2>, and are then transferred. This procedure only works if a conversion rule exists between the data types of <f1> and <f2>. Type conversions make the MOVE statement less efficient. How much less efficient depends on the individual conversion.
The data objects <f1> and <f2> are incompatible, and no conversion is possible. The assignment is not possible. If this can be recognized statically, a syntax error occurs. If it is not recognized before the program is run, a runtime error occurs.
The source and target fields can be of different data types. In contrast to other programming languages, where the assignment between different data types is often restricted to a small number of possible combinations, ABAP provides a wide range of automatic type conversions.
For example, the contents of a source field with an elementary data type can be assigned to a target field with any other data type. The single exception to this rule is that it is not possible to assign values between type D fields and type T fields. ABAP even supports assignments between a structure and an elementary field, or between two structures.
DATA: T(10) TYPE C,
NUMBER TYPE P DECIMALS 2,
COUNT TYPE I.
T = 1111.
MOVE '5.75' TO NUMBER.
COUNT = NUMBER.
Following these assignments, the fields T, NUMBER, and COUNT have the values 1111 , 5.75, and 6 respectively. When you assign the number literal 1111 to T, it is converted into a character field with length 10. When you assign NUMBER to COUNT, the decimal number is rounded to an integer (as long as the program attribute Fixed pt. arithmetic has been set).
Pls. reward if useful -
What is the difference between SAP NW PI7.1 and PI7.1 EHP1
We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
SnehaHi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit -
what is the difference between Safari 5.1.7 and 5.1.10?
I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)Might be the security fixes > Safari 5.1.10 for Snow Leopard
-
Hi,all!
What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?
Why there have two JRE? Which one we should use?JRE - Java Runtime Enviroment, what you stick on the end-user computers - http://www.java.com
SDK - Software Development Kit (aka JDK - Java Developer Kit) - http://java.sun.com -
What is the difference between 11.1.0.1 And 11.1.0.1.1
11.1.0.1 is the base version of Oracle installed on the system.
11.1.0.1.1 is the version of PSU (patch set update) applied to the base release version.
Take a look at this http://docs.oracle.com/cd/B28359_01/server.111/b28310/dba004.htm -
What is the difference between APPLE TV models 30850MD199LLA and 300024854433?
What is the difference between APPLE TV models 30850MD199LLA and 300024854433?
MD199 is as shown below. The other number is not an Apple model number.
OVERVIEW
Introduced March 2012 (A1427) March 2013 (A1469)
Discontinued --
Model Identifier AppleTV3,1 (A1427) or AppleTV3,2 (A1469)
Model Number A1427 or A1469
EMC 2528
Order Number MD199LL/A -
What is the difference between apple care protection plan and apple care
What is the difference between apple care protection plan and apple care +
apple care protection plan
That is the extended warranty (total of 3 years including the standard warranty for the first year) for any Mac computer.
apple care +
That is the extended warranty (total of 2 years including the standard warranty for the first year) for any iDevice (iPad, iPhone, etc).
For either, the standard warranty is usually referred to as hardware warranty (not Applecare); see an example for the warranty for an iMac:
http://www.apple.com/legal/warranty/products/embedded-mac-warranty-us.html
whereas the extended Applecare is referred to as that:
http://www.apple.com/legal/sales-support/ -
What's the difference between tax account in FTXP and OB40
Hi all,
There are two tax accounts link to same tax code in FTXP for different company codes, but in OB40 I only can assign one account to tax code. What's the difference between tax account in FTXP and OB40?
Thanks in advance.
babyyw
Edited by: babyyw on May 5, 2010 8:21 AMHi,
FTXP no need to create a request and it is easy but in OB40 system will ask you create request. and another thing is in FTXP it is at country level but in OB40 it is at chart of accounts level. -
Hello,
The resource filled his/her timesheet in PWA.
Now :
What are the differences between Turn in Final Timesheet
and the other option: Send Progress for Selected Tasks?
ThanksYou are partially correct and partially wrong.
Turn
in Final Timesheet sends
the timesheet to the Timesheet Manager for Approval
but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
Yes
after approval progress will be available in MPP as well as in Projectweb app as % complete .
Send
Progress for Selected Tasks
Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
app as % complete.
In Send
Progress for Selected Tasks Timesheet
Manager doesn't receive anything in his Approval center
because all the update directly go to Status manager Approval center.
Here you have to understand
that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
actual approval)
kirtesh
Maybe you are looking for
-
I am desperate and seriously need some help - iPhone tracking.
I’m really hoping one of you can help me. Long story short – my daughter aged 6 was taken from me last week because my violent rapist ex husband told Children’s Services that I tried to drive her off a cliff and am a serious suicide risk, I abuse her
-
Hi guys, do you think its better that i just leave my macbook plugged in all the time *if i can* ... or should I just use the battery whenever I feel like it? I know that your supposed to do at least one full drain with your computer at least once a
-
I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
-
With more than one window open in firefox 4 I starts to drain my memory
With mozilla 4 I have more than one window open and my memory which has 2 gigs in it starts to drain and then everything freezes.
-
Hi I have a problem when create a incoming payment from customer creating journal entry, payment, and add the journal entry on the payment if the invoice is partially paid the payment is created sucessfully but if the invoice is not paid send a erro