What's the Password Recovery Procedure for ACS on windows

Hi All,
With the "automatic local login" disabled, how can I recover the forgotten administrator's password or reset it?
Many thanks in advance!

Hi,
You need to modify the registry. Pls refer to this url:
http://www.cisco.com/warp/public/480/csntfaq.html#Q3
rgds,
AK

Similar Messages

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

What ID does password recovery procedure work on?

We recently completed the steps to recover password on a 2960G switch as per instructions found at http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml Four password were changed as per documentation (secret, enable, vty, and console)
However as we now try again to get access to the device using the CNA client, none of the new passwords work! We would like to confirm what ID this procedure reset – do we use Cisco, blank, or an existing user ID that we can see still exist? And we are assuming that we should use the newly updated console password to access the ‘console’… but maybe this is wrong too?
We still can’t seem to get in with anything… (and the process seemed to work all the way through)
Suggestions?

Hello
Can you perform the steps again, The most important part is when the switch has come ups for the first time and you gain access.
From here the switch is set to default - so if you wish to start from scratch all you need to do is wrtie to memory.
WR
if you wish to use the old configuration but change the password then, the very first thing you need to do is:
rename flash:config.old flash:config.text - this is reverting the change you did in rommom access
Then reset your passwords (see below) and save your changes and reload.
WR
Password changes
username admin privilege 15 secret password
username anyone password password1
enable secret letmein
service password-encryption
line con 0
exec-timeout 0 0
logging synchronous
login local
line vty 0 15
login local
logging synchronous
transport input telnet
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks.

What is the calibration procedure for the battery on the Compaq Presario A945 US

My computer says Plugged in, not charging... someone said to do the "re calibration procedure". Can someone tell me what it is and how to do it?

Hi:
Below is a support document that is germane to all notebook PC's. It was written for Vista but should be the same for Windows 7.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00817650&prodT...
Paul

What is the best workflow procedure for importing DV SP 16x9 footage into FCP7 and then exporting the best quality 16x9 to standard DVD so that it looks great (or at least good) on a 50" Samsung LCD TV ?????? Please help! anybody?? Thanks!

We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks

> Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
No it doesn't. DV is 13GB per hour.
In any case, a Video DVD uses the MPEG 2 codec, not DV.
>What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
DV NTSC anamorphic.
>what is the best method for exporting for outputting this footage to DVD...
Use the Compressor DVD preset "Best Quality 90 mins".
>...that preserves the original quality of the DV SP footage?
Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale.

What's the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

I have a Z50-70 laptop that came preinstalled with Windows 8.1. It is a OEM version, with the product key stored in the Bios. It is a UEFI install. It currently has OneKey recovery installed, which, if I understand correctly (I haven't actually used it yet), allows you to recover from a recovery partition in the hard disk. This isn't a "fresh" Windows 8.1, but an image provided by Lenovo that takes you back to the state the laptop was in when originally purchased (will have all Lenovo software and drivers preinstalled). According to the official Lenovo upgrade guide, before performing the Windows 10 upgrade, we should uninstall basically all Lenovo software, including OneKey recovery and it won't work in Windows 10. Questions: 1. What's the correct process to recover the system from within Windows 10 if something goes badly wrong? I think Windows 10 has a built in "reset your computer" functionality in Settings which I assume is what we would be expected to use. Would this take me to:a. A completely fresh install of Windows 10?b. An image created during the 8.1 to 10 upgrade, containing all my files etc at the point of performing the upgrade?c. Or would it use the Lenovo recovery partition (that OneKey Recovery would have used if it was compatible) and take me back to Windows 8.1?d. Something else? 2. Once I've performed the upgrade and Windows 10 has successfully activated, I believe I could create a bootable media with the Windows 10 ISO, boot into it and install a completely clean installation of Windows 10 and it would activate. I could theoretically do as many fresh installs from the bootable media as I want, so long as initially I did the upgrade (not a clean install), and the laptop hardware doesn't change. Is that correct?2a. If so, during the first clean bootable media install process, would I be safe to compeletly remove the Lenovo recovery partition entirely, and from that point onwards rely on Windows 10's "Reset your PC" functionality? Could I could even just use reinstalling Windows 10 from bootable media again as a way of recovering? If I understand correctly, it doesn't make sense to keep the recovery partition it if it can't be used within Windows 10. I think it I had a regular desktop PC with a retail version of Windows, then all the above would be fine. The added complications here are that 1. I have no Windows 8.1 product key (it's handled alll by the BIOS), and 2. I have no recovery disks. I want to make sure I understand everything fully before upgrading, and potentially doing a clean install using bootable media, so that I don't end up messing something up and ending up with either a laptop that I can't recover, of a Windows installation that isn't activated. Thanks.

Update for anyone else reading: I just uninstalled OneKey recovery on my Windows 8.1 installation, in preparation for the upgrade. So as far as Windows is concerned, OneKey Recovery has been completely removed. The good news is that I then shut down the laptop, pressed the novo button, selected "System Recovery" and I was still greeted with the OneKey recovery program where I could choose to restore from factory image, or a custom image. Therefore I assume that once I've upgraded to Windows 10, I will always have the option to restore to factory Windows 8.1 if I ever need/want to. The confusion seems to be that the OneKey recovery software is actually two separate softwares: 1. OneKey Recovery #1 is installed within the hidden recovery partition that is responsible for performing a system restore from the image of your choosing - either the factory image or a custom image created by OneKey recovery software #2. OneKey Recovery software #1 is always accessible via the Novo button. 2. OneKey Recovery #2 is installed on the Windows 8.1 installation, that is responsible for creating custom system images. You can also choose to restore the system from here, but as far as I can tell, this just restarts the computer and loads up OneKey software #1, which allows you to perform the recovery. OneKey Recovery #2 is the software that Lenovo told us to uninstall before upgrading to Windows 10. However, uninstalling OneKey Recovery #2 will leave OneKey Recovery software #1 in tact.As far as I can tell, this means that uninstalling OneKey Recovery #2 means that we lose the ability to create custom system images, but we retain the ability to restore from a system image. Can anyone confirm that I've understood correctly, and that what I've said above is indeed the case? I'm still a little unsure about what Windows 10's built in "Reset this PC" will do though - whether it will use Lenovo's recovery partition or perform a clean Windows 10 install.

What's the sga max size for a 32bit windows server?

Hi,
I have a 32bit Windows Server with 16G of RAM... What is the SGA max size that I can setup?

Depending on your version of Windows and your version of Oracle there are methods to increase the usuable memory available to Oracle including the MS \3GB and \PAE switches and the AWE memory extention feature.
Oracle has notes on the subject:
Windows Memory Configuration: 32-bit and 64-bit 873752.1 plus notes 46053.1 and 46001.1
How to use Very Large Memory, higher than 4Gb on Windows 2003 32 bit #342080.1
HTH -- Mark D Powell --

What is the password it asks for every time I try to download something?

Everytime i try to download something it asks for a password. I dont know what this password is supposed to be????

on_the_moon wrote:
I did not create a password when i logged in, i was told i would be able to do that later. How do I create a password with my user?
That is fine.
Here is how to create a password with your user :
System Preferences, System, Users & Groups, Change Password (to the left of you display picture).
If you cannot find this then please insert a screen shot of your Users & Groups page in System in System Preferences.
I hope this helps.

What is a password recovery email address

Hi,
I am looking at the info page on setting up clien email http://helpx.adobe.com/business-catalyst/partner/setup-pop-imap-email-accounts.html in the Creat email accounts for users section, it says, "Enter the new user email address, name and password recovery email address." What is the password recovery email address? Also would the new user email address be the users name@my_domain_name.com? Thanks.
Barbara Parkman

Hi Barbara,
Keep in mind the Muse webBasic plans do not include email.
The password recovery email address is an email address that they could have their password emailed to in case they forget it. Obviously sending it to the same email address wouldn't work as they wouldn't be able to get it.
Yes, the email address would be @clientdomain.com ....
As a side note I recommend hosting the email with where ever they bought the domain from and only use Business CAtalyst for the site itself.
Here is why ...
http://www.lawryk.com/BlogRetrieve.aspx?PostID=578206

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

HT201441 Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such

Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111

Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

What is the password for "Get Text Rect.vi"

What is the password for "Get Text Rect.vi" I need it to add a password to my code, which uses this error handler provided by LV.
Tim Burroughs
email:[email protected]
email:[email protected]

That is a an NI VI and they will not give you the password.
When saving your VI makes sure you UN-CHECK the "Include vi.lib files" option.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What is the outgoing mail server for icloud? I keep getting "password rejected"

What is the correct mail server for icloud? I keep getting a message "rejected the password" no matter what I seem to try.

smtp.mail.me.com
But why are you doing this manually?

What is the password for "Public Fox Authentication"- Can't download plug-ins without the password

when attempting to download Adobe Flash on my desktop after updating my foxfire, i click on update adobe flash. When I click on the update i get a screen entitled "Public Fox Authentication" which requires a password.
What is the password? I have attempted several PW's, with no success.

The password would have been set by you or somebody else using your computer. You can remove the password, for details of how to do this see the develop comments at https://addons.mozilla.org/en-US/firefox/addon/3911/

What is the password for predefined SYSTEM account

Hi ,
i am trying to use predifined account called as 'SYSTEM' to assign priviliges to a user .
But i am unable to login into SYSTEM account .
please tell me what is the password for this SYSTEM account . . Thanks

If anybody has forgotten their SYSTEM account , do this way
Start SQL*Plus (Start -> Programs -> Oracle – Instance Name -> Application Development -> SQL Plus).
At the login prompt, in the user-name field, type ”/as sysdba” (including the forward slash, but without the quotes). Click OK.
You are now connected as system with full DBA rights.
To reset the password of the SYSTEM password (or any other user password), run the following query:
alter user system identified by NewPasswordHere;
Keep helping others .

What's the Password Recovery Procedure for ACS on windows

Similar Messages

Maybe you are looking for