What technology that can be used for the creation of Need Definition?

Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
Technically, this task is broken down to below tasks.
1) Creation of need definition screen - Basically a template where a need can be created with Items, Sub Items and other related information
2) Selection Screen for Buyers and Lead Buyers - This enables the the Buyers to select the Need Definition assigned to them based on the status.
3) Report - List of all the Need Definition( Item and Sub Item)satisfying the selection of step 2. with the possibility to navigate to the Need Definition screen ( Step 1) upon selection.
Now the question is,
what technology is recommended for the above Tasks? We thought it would be BSP but do you guys have any suggestions...
Do we have any issues in displaying the report in BSP? please let me know
Remember we are version 4.0 of SRM.
Thanks in Advance..
Mohan.

You can use conditional styles to address specific browser issues (this is more than likely the markup you noticed).
Here's a good guide:
http://www.quirksmode.org/css/condcom.html

Similar Messages

HT4718 What USB Flashdrive can I use for the Recovery System a 4G or a 8G?

What size of drive do I need for the Recovery System? Can I use a USB flashdrive?

If you're talking about just the Recovery HD, you only need 1GB so use a 4GB USB thumb drive and the OS X Recovery Disk Assistant to create it.
If you're talking about the ML installer (installESD.dmg) use an 8GB USB thumb drive.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2

What photo gallery can I use for a Mac OS X version 10.6.8 with 1GB memory?

what photo gallery can I use for a Mac OS X version 10.6.8 with 1GB memory?

What do you mean by photo gallery? Are you referring to what version of the iPhoto application? What version came with your iMac?
iPhoto 8.1.2 would be a good choice for that system and limited amount of memory. It comes on the iLife 09 disc which is available from 3rd party vendors like Amazon.com or eBay.com.
If you can add memory to your iMac do so. Increasing memory to 4 GB will do wonders for the speed of the system and applications.
OT

Iphones that can be use in the Philippines

Can I buy an iphone here in the US that can be use in the Philippines?

To use it with a Philippine carrier as the primary carrier you would have to "unlock" the phone. This violates the purchase agreement and the warranty and puts the phone at risk for permanent failure if not done correctly. As you would expect this cannot be discussed in an Apple forum.

What kind of glass is used for the iPhone 6?

I want to get a case before we upgrade to the iPhone 6. Some of the cases we are looking at (Speck Mightyshell) do not come with screen protectors. I was wondering what kind of glass is used for the iPhone 6 and if a screen protector is even necessary?

The iPhone 6 currently uses Corning’s Gorilla Glass. There was some speculation that they would start using Sapphire glass but I guess they’re not ready yet. I have had my iPad 2 for years now and the glass is still perfectly fine. My new iPhone 6 uses a more developed version of the same glass. Will the glass break? Yes. Will the glass scratch? Yes, if you carry your phone in the same pocket as your car keys, the screen will scratch. It’s not impervious, just highly resistant.
I do have a real life controlled experiment going on in the family. My wife and one son have their iPhone 6s in a case WITH a screen protector. Myself and my other son carry our iPhone 6s around without ANY protection whatsoever, no case and no screen protector. So far they all still look perfectly fine. We’ll se how this experiment turns out.

The AIR can be used for the EXE/Direct3D based game?

--English
Hello there.
I'm a game programmer.
I saw that the AIR is being used for LOL(legend of leaders).
I don't know is the AIR used for just game launcher? or in-game UserInterfacce?
Some of games are implement user-interface by the SWF(flash output) with the Scaleform.
Scaleform is C++ library which rendering SWF using Direct3D on the game screen(also include fullscreen) and notify event that interaction with the user input through the C++ level event.
It provides with .h, .lib, .dlls
The AIR can that above things?
The AIR can be used for the exe based 3D game?
--Korean
AIR 를 이용해서 스케일폼처럼 게임 내부의 UI를 구현할 수 있는지 궁금합니다.

Hi,
If the report in question is same as the post on which I replied a few minutes ago, then you can try this:
1) Create a parameter in the Main report. Go to Field Explorer and create a new Parameter.
Set the List of Values option to 'Dynamic' and choose the Region Field from under 'Value'
2) I'm assuming the Crosstabs are placed in the Sub-report. So, right-click the subreport and select 'Change Subreport Links' > Move the Main report parameter to the 'Fields to Link to' area and from the drop-down for 'Select data in subreport based on field' choose the Region Field.
This will automatically add the Main report parameter to the selection formula of the sub-report.
Hope this helps!
-Abhilash

What easy setup do I use for the Canon A1 1080i60?

What easy setup do I use for the Canon A1 1080i60?

I called tech support and they were no help.
G5 Mac OS X (10.4.9)

What kind of word processor can I use for the Mac OS X version 10.5.8, what kind of word processor can I use for the Mac OS X version 10.5.8

I got a macbook 2008 for free. Since I already have an iMac with everything already installed, I only want to use this macbook 2008 for pages but it looks like I cannot upgrade the software therefore I cannot download pages. What word processor can I use?
Thanks!
Edith

I would recomment Libre Office instead of Open Office. Look for information on Office 2011 here. You will find iWork '09 Boxed Set here.

I was getting and iTunes gift cards and I want to ask that can the iTunes gift card can be use for the app store.

I was getting an iTunes gift card and I just want to ask that can the iTunes gift card be use for the app store.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102630)

Method that can be used for multiple views

Hello,
I've got three tables: Person, Company, Adress. Each Person/Company can have mulitple adresses. So Adress has a foreign key to Person and Company. In ADF BC I've created two views for Adress: PersonAdressView, that has PersonView as Master and CompanyAdressView that has CompanyView as Master. Now I want a copy functionality, that validates and copies a given Adress row. I want this functionality for PersonAdressView and for CompanyAdressView. Is there a possiblity to write generic code that can do this?
The logic that works on CompanyAdressView/CompanyAdressViewRowImpl and on PersonAdressView/PersonAdressViewRowImpl is the same. But the java datatypes are in so many lines different that it is almost impossible to use common code. Is it possible to resolve this problem with common base classes? If it is, I have no idea how to create them.
regards
Jörg

Hi,
create a custom version of ViewObject (extending ViewObjectImpl) and base the two ViewObjects on your custom VO (extend).
Frank

Are there mac keyboard stickers that can be used for worn-out keyboards?

Are there Mac keyboard lette stickers that can be used on worn-out keyboards?

http://www.thekeyboardcompany.com/keyboard-stickers/replacement-keyboard-sticker s/?gclid=CPrkpciwtL4CFSsV7AodpBcA8w
http://www.amazon.com/REPLACEMENT-KEYBOARD-STICKERS-BACKGROUND-NOTEBOOK/dp/B003D T15D6

Does any company make a Express Card 34 that can be used in the 17 for USB 3.0

I want to use an external seagate external USB 3.0.
Is anyone making one for the Express34 PC Card and if so do you get the extra speed for read and write.

Theoretical and acual speeds for all types data connections can differ due to several variables. I cannot tell you if my eSata connection has ever achieved the theoretical maximum speed because I have never measured it. However I have compared transfer times against Firewire with large files and it is noticeably faster (at least by 50%+). Therefore I highly recommend having it if you need to transfer large files from one HDD to another.
If you have a recent MBP, you already have a Thunderbolt connection. I do not believe that there will be a Thunderbolt Express Card for older MBPs because they are not configured to accept that technology.
Ciao.

Can I create an icon for an app tab so that it is useful for the many tabs that don't generate their own?

It's very simple. I've started using app tabs, and my first three are fine. Now I've created an app tab from my tab to the website http://www.thomasyoungcentre.org/index.html.
However, its app tab only appears as a white page, which isn't very memorable, especially as I find that some other websites I use have the same blank app tab. So I wonder if I can make a little custom icon of some kind to identify this website for me on its app tab. Alternatively, what do I need to tell the website managers that will enable this feature for us.

You must realize that the quality of sound has been compromised by the very fact of compression and equipment. You are never likely to experience the nature of a live event by listening on an iPod. The best solution is to get a better quality of earbuds/ earphones/ headphones to improve the playback experience. The higher quality headphones such as Bose, Sennheiser, Sony have capabilities to counter ambient interference ( Bose noise-cancelling for example), and they have a better quality speaker than the Apple earbuds. This standard issue bit of kit is more of a courtesy to iPod buyers so that they will have something right out of the box in order to listen to their music but they are not the highest audio quality. The best audio quality will cost every bit as much as, or even more than, the cost of an iPod. As for turning up the volume, that is a foolish undertaking that can have long-term consequences on your hearing. Tinnitus cannot be cured! You will live with it unto your last days.

What technology that can be used for the creation of Need Definition?

Similar Messages

Maybe you are looking for