What the FU*K went wrong with the last update?

My bad.
Steve.
Last edited by steve_v (2010-04-09 12:27:15)

bangkok_manouel wrote:allan broke the closing feature
No... reopened to set the OP straight. It is impolite to call someone an idiot and then close a thread.

Similar Messages

What went wrong with the control autobackup

I started a rman autobackup incremental level 1 at 2 am, and I noticed that at the same time, system generated an error in alert log point ing to a trc file in udump:
/oracleapp/apps/admin/baanbk/udump/baanbk_ora_491598.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /oracleapp/apps/oracle/product/10.2.0/db_1
System name: AIX
Node name: baanbk
Release: 3
Version: 5
Machine: #######
Instance name: baanbk
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 491598, image: oracle@baanbk (TNS V1-V3)
*** 2007-02-15 02:00:31.775
*** ACTION NAME:(0000055 STARTED111) 2007-02-15 02:00:31.731
*** MODULE NAME:(backup archivelog) 2007-02-15 02:00:31.731
*** SERVICE NAME:(SYS$USERS) 2007-02-15 02:00:31.731
*** SESSION ID:(322.8883) 2007-02-15 02:00:31.731
can anyone tell me how to trace the error? there is no mention anything in the content.

There is no indication of any error in the part of the trace that you posted. If this alert log trace entry and associated trace file is created every time the rman backup is ran and there is no error number or formatted dump information in the trace file then the trace may just be a left-over from development debugging. Oracle development has been known to forget to turn off trace and debug information before releasing the code to production in the past. This may be another example.
Otherwise you need to post the error messages in the trace.
HTH -- Mark D Powell --

Something went wrong with the invisible shield application

After putting on the invisible shield, I was really happy because it turned out great. I waited about two to three hours then started using it.
To my horror, I think my nano might have shorted out because when I press play the song changes. sometimes the play/pause button doesnt even do anything when i press on it...when i touch the volume control, it increases and decreases erratically regardless of what im trying to do...sometimes it even seems like my nano has a mind of its own because when i simply move the nano, without touching the controls, the song changes or the volume changes.
this erratic behavior occurs sporadically. sometimes my nano works fine. then right when i think all is well, my nano becomes possessed. is it possible that my nano has shorted out? maybe i should let it dry?

hey carl,
The process of applying the shield requires that I wet the film with soap and water. What do you suggest I do? My mistake was that I did not put on the hold button when I was applying the wet film and thus my ipod turned on while I was putting on the shield. i realize now that my nano should not have turned on for 24 hours. Should I just wait and see if the funky behavior goes away? or should i visit the nearest apple store?

After the 2014 update photoshop won't talk to Bridge or Lightroom. What went wrong with the update?

When I try to export images from Lightroom or Bridge to Photoshop now I get a message that Photoshop won't start up when it is already open and running.

Update your graphics driver and/or turn off GPU acceleration in the Performance prefs.
Mylenium

HT1338 Problem. iMovie final cut OSx 10.8.2. Can't DVD the movie. IMOVIE quit unexpecedly all the time. Nothing wrong with the movie. What to do?

I have done this many times and aqlways works, however, this 20 minutes movie I created keeps crashing in the DVD prepare process. What can I do.

Good morning.. buon giorno..
What a shock..I have had Norton for more than 10 months in my MAC..
Anyway Thanks Silly Rabbit I took it allllllllll out!!!
For "ClamXav", I didn't understand on the site which one I should download..
Will you tell me the right one for me??
Thanks also Karsten,
yes it says "MAC OS extended", Is that the way it should be, ne?
FAT32.. how can I know if my mac is formatted in FAT32 or no???
(but I don't think I would have done such a complicated thing, maybe
I don't need to check?)
Umm I've found something else.. Quick Time..
I had downgraded it from 7 to 6 this summer as I heard lots of
discussion here, but it was upgraded by mistake when I have forgotten to
check off the box. Now it is 7.0.3.
For i movie HD, and i movie 4 (I still use it for old projects) what Quick time
should I use?? Do I have to downgrade it??
Endless love is better than endless discussion, but
it at least gives us quite a few chances to greet each other,, (maybe endless lovers don't greet any more in the end..)
ARIGATOU DANKE SHEN?? GRAZIE!
minobu
Power PC G4 Mac OS X (10.3.9) RAM 640

I just tried to update Itunes. Something went wrong with the update and now itunes won't open

I was notified of an update to itunes when I opened it on my PC this morning. I agreed to the update. The update did not finish and now I can't open itunes on the PC. I tried "repair" in the control panel to no avail. HELP!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Something went wrong with the alternative Number Keyboard!

I can't tell, from when on, that little Number Keyboard began to malfunction. I have tried in as many as possible applications. But every time, the same result: as soon as I turn on the Number Keyboard with NumLock (F6) in an app, it stops responding right away. And other apps stop to responding to mouse click simultaneously. So I have to use the keyboard to bring up the Force Quit window, then force quit the app within which I turn on the Number Keyboard. Everything would be back on the line right at moment that app has quitted.

Today, again, I found the real cause of this problem all by myself accidently. By default, Mouse Key, which located in the Mouse & Keyboard pane of Universal Access, is turned on. This option use the alternative number keyboard as the controller of cursor movement. So when this option is turned on, you can't use the alternative number keyboard to type numbers. And I think Apple shouldn't turn on Mouse Key by default.

Something went wrong with the laptop

Hello,
I downloadede some software from internet but it allowed some viruses to enter my laptop. Please help me to get out of this problem.
With regards,
Rohan

Install a antivirus software and scan for threats / virus.
(I would try Avast Home Edition which is free)
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

My mail was working fine until yesterday. Now it says that mail connects to the internet - but something wrong with the ports. I have spoken with talktalk - they can't help, Ithe major problem being that I have forgotten my password!

Hi, I'm working on an Imac, yesterday email was working fine, now nothing is happening. It says that I need a password to check details - this I can't remember, it doesn't seem to be the same as the one I use to log on to mail through browser (talktalk) - message says can connect to internet but error with port settings etc which need verifying. Talktalk unable to help further - but as I can't get past password page I am very stuck. Any one help as to how to find out password.... have tried to make a new account but that doesn't seem to wrok either. Am wondering if fault is with computer. Thanks.
imac 10.10.1

TalkTalk E-mail Setup See post by Csound1

I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

What's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

what's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

You are not addressing Apple here...
This is a User to User forum...
iTunes Store: Which types of items can I buy in my country?

What's wrong with the fan of my 15 inch retina mbp?

what's wrong with the fan of my 15 inch retina mbp,when i play a big game like Batman ,the fans are so quiet and keep around 2000rpm,but the temperature of cpu is up to 80 degrees.(by the way, i have reseted the SMC for many times,but it doesn't work)

80 degrees F or 80 degrees C?

What's wrong with the code?

public void run()
try
{     for(;;)
     mgr = (RTPManager)RTPManager.newInstance();
     mgr.addSessionListener(this);
     mgr.addReceiveStreamListener(this);
     try{ /*****port1 = port2 = 29261, which port is only used in here
     localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
     destAddr = new SessionAddress(ipAddr, port2);
     }catch(Exception e)
          System.out.println(e + " 4");
     try{
     mgr.initialize(localAddr);
     }catch(Exception e)
     System.out.println(e + " 5");
     //set buffer
     bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
     if (bc != null)
     bc.setBufferLength(20);
     try{
          mgr.addTarget(destAddr);
     }catch(Exception e)
     System.out.println(e + " 2");
catch(Exception e)
     System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?

I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

What the FU*K went wrong with the last update?

Similar Messages

Maybe you are looking for