What to do for automatically change over of PHASE from 1 to 2 in case of multilevel method of depreciation.

Hi all
As per the statutory requirement we want to maintain Multilevel method of depreciation in which we have maintained two phases given as below-
Dep/int.
phase
base method
decl. bal method
prd cont
mutilev. Method
change. Me
change over % rate
ordinary dep
1
ZMR1
0
001
Z02
2
0.3
ordinary dep
2
0011
0
001
001
0
0
Because asset need to depreciate upto 70% of its net book value on the basis of SLM percentage base as per phase 1.
After that it must shift to phase 2 ,where depend upon remaining useful of that asset , balance value of asset need to be spread over.
But while testing in, it is not automatically shifted to phase 2 directly once asset reaches its 70% (ie.once condition given phase one get exhausted)
Then pls guide me what to do for automatically change over of PHASE from 1 to 2 ??
Thanks and regards
Manjusha G.

Hi Manjusha,
To meet your requirement, you have to mention changeover in T code AFAMA-changeover method "2" and the changeover % 70 and in second line you can give phase 2 changeover within planned life and give your depreciation methods after changeover.
Refer the sample screenshot.
Hope it solves..
Regards,
G.Sethuraman

Similar Messages

What is Lightroom for? How is it different from Photoshop?

What is Lightroom for? How is it different from Photoshop?

Hi stephen,
for detail information, read this : https://forums.adobe.com/message/4568487
regards

Automatic change in MIRO Screen from Invoice/ Credit Memo/Sub-Credit/Sub-D

Hi All,
While we post the invoice through MIRO T-code, if we change the Transaction type from Invoice to Credit memo/Sub-Creditmemo/Sub-Debitmemo after completion of particular document SAP is not automatically changing the Transaction type as Invoice, its still remains same Transaction type which we changed last.
Can anyone advice is there a fix for this to get back to Invoice after doing anydiffernet transaction type..
Regards
Balaji

1) You have to enter the subsequent credit
2) The account postings for a subsequent debit/credit depend on the quantity that the subsequent debit/credit applies to:
If the quantity of the subsequent debit/credit is smaller than or the same as the quantity delivered, the system tries to post the subsequent debit/credit to the stock account. If the material is valuated with a standard price or if there is insufficient stock coverage for the quantity to be debited or credited, the amount is posted to a price difference account.
If the quantity of the subsequent debit/credit is larger than the quantity delivered, the system distributes the relevant amount proportionally. The part of the subsequent debit/credit that does not have a goods receipt is posted to the GR/IR clearing account. The remaining amount is posted to the stock account u2013 or in the case of standard price control or insufficient stock coverage u2013 to a price difference account.

SMOEAC-Filter for Customer Changes not to replicate from CRM to R/3

Hi,
We have 4 subscriptions in SMOEAC for CRM to R/3 replication. They are
1.ALL BUSINESS PARTNERS
2.ALL BUSINESS PARTNERS RELATIONSHIPS
3.ALL BUSINESS PARTNERS HIERARCHIES
4.SALES DOCUMENT ECC.
In the business partners, Now we need to put filter to avoid flow of Customer Master data changes (to R/3) done in CRM.
Iam seeing information in forums that we can able to do that by changing the publication type from Simple Bulk(MSG) to Simple Intelligent(MSG).But Iam not able to change it for ALL BUSINESS PARTNERS in transaction SMOEAC.
pl advice on the possibility.
Regards
A.Sureshbabu.

Hello,
Assuming X is the replication object.
1. Remove all the sites assigned current bulk X object. Check the REALIGN and SUBCHECK queues in Tx: SMOHQUEUE and make sure that all jobs triggered due to this removal are complete.
2. Delete the subscription for bulk X.
3. Delete the publication for bulk X.
4. Delete the existing bulk X object.
5. Create a Replication Object (Intelligent) for BDoc type X with Criterial Field selected.
6. Create a Publication for the Replication Object above.
7. Create a Subscription for the Publication and set the Criteria Value.
Please note the subscriptions corresponding to the replication object must be deleted from ALL clients of the server.
Hope that helps.
Thanks,
Rohit

Essbase server - automatic change of substitution variable from SQL

Hi,I would like to automaticaly change the substitution variable in Essbase Server. Is it posible to change the substitition variable from external source e.g. SQL statement?Simple sample:I would like to assign value "2003" to "CurYear" substitution variable. But value "2003" I would like to get from SQL:"select year(current date) from table".There are commands in Esscmd and MaxL Shell, see bellow.Esscmd command:CREATEVARIABLE "CurYear" "localhost" "" "" "2003";MaxL Shell:alter system set variable CurYear '2003';Is it possible to get the value '2003' from SQL and pass this value to Esscmd command or MaxL Shell?My system:Windows 2000 Professional Service pack 4Essbase at 6.5.3 levelThanks,Grofaty

You can create a text file from the SQL server that writes the command like"CREATEVARIABLE "CurrYear" "Servername" "AppName" "DBName" "2005";then you can create a schedule job that would run this script which can update the variable. CREATEVARIABLE creates/replaces the current variable.

In anticipating upgrading to Premiere Elements 13, I need to know what "gotchas" there might be in loading project files from version 10 (in case someone needs another DVD/Blu-Ray)

Particularly, can I load project files from version 10 (in case someone needs another DVD/Blu-Ray)

cbjameson
What computer operating system is involved?
There is no guarantee that a project created in an earlier version can be opened in a later one. Many times it can, but...
If you do try this, then please consider working from a copy of the project 10 project file and then trying to open that in 13/13.1.
Reason: projects created in an earlier version and then opened and edited in a later version cannot be opened again in the
earlier version.
And, there is always the issue of maintaining the connect of the source media with the project file. Is this move from 10 to 13/13.1
happening on the same computer and are the source media in the same place where they were when they were first imported
into the 10 project. Disc menus consideration may enter into this depending on your details.
ATR

How to add attributes in Data Column for automatic changes

Hello everybody,
Could you give me an advice?
I have characteristic and attribute assigned to it.
I want to make what when i change characteristic(variable) its attribute in planning layout changes too. So in planning area window in Characteristics Rels tab i made "Derivation, Combination Check and Proposal" with main characteristic and its atribute. Everything works fine, but problem is, that attribute can be only in Header or in Lead column.
In planning layout i want to add what attribute in data column.
Maybe where is other solutions?
Thanks in advance
Best Regards,
Arunas

Hy, Srini,
Thanks for your response.
There is a simple example, which describes the main principle of my solution:
Characteristic DIVISION
A
B
(filled with master data)
Characteristic LEVEL
1
2
(filled with master data)
Characteristic NAME
Ben
John
(filled with master data)
char. LEVEL, NAME are attributes for char. DIVISION
DIVISION with master data:
Division Level Name
 A 1 Ben
 B 2 Jhon
Planning Layout:
In header section is char. DIVISION (variable)
When I select DIVISION with value A, in layout values for attributes should be displayed automaticaly:
DIVISION = A
NAME
LEVEL
(Lead column)
(Data column)
Ben
1
I find solution to do it with Characteristic Rels, but i can't insert char. LEVEL into Data Column, it can be just
in Lead Column.
I don't know how to do it.
Could you suggest something?
Best Regards,
Arunas

Idea for Automatically Changing Sys Password

What is the best approach for automating the changing of sys password every x amount of days?
I need to do this for security reasons

Best practice is to never use SYS for anything other than patching. So my recommendation is to change it after patches are applied and make sure that no one uses it except for patching.

What automatically changes a cookie setting from Allow to Block?

I can get into SalesForce ok, but when I click on the Help and Training tab it asks me to log in again. And it denies me. For some reason the permission for the cookie is blocked. I go in and change to Allow on the web page and also in the Mozilla Permissions Manager. Then I can click on the tab and get it. But if I go back to the Permissions Manager, it is blocked. If I click on anything on the web page, it requires a log in again, which also fails. The web page permission is also reset to block. I am using a MacBook Pro, if that matters.
Even when I reset the permissions on both the web page and the FireFox Permissions Manager to allow, it seems the next click triggers a change to block.

Rename the file "permissions.sqlite" to permissions.sqlite.sav in the Firefox Profile Folder in case the file is corrupted.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
This will remove all exceptions (cookies, images, pop-ups, software). 
If renaming didn't help then you can undo and rename the file permissions.sqlite.sav to permissions.sqlite to get back the old exceptions.

What can I do to change my home page from bing to google- I have tried 50 times and bing always shows back up as my home page

I have done everything firefox says to do to change my home page. I want ti to be google but when I drag the icon over to my home page it only stays there for a few minutes and then bing shows back up. there is a little message that appears and says "someone has tried to change your home page and we have blocked it". I don't want bing aas a home page-don't know how it got on there anyway.

Try clicking Start -> Settings -> Control Panel
Add/Remove Programs
Look for something called Windows Live Search Protection or Bing Search Protection.
If you cant find that, try clicking Windows Live in the list, then clicking the change button. Untick anything that mentions Bing or the Bing Toolbar.

How can I automatically change my edited timeline from 24fps into 25fps?

Hello everyone,
I have a timeline in 24fps with 24fps footage. I have to convert it (the timeline and the footage) into 25fps, so I can put a 25fps Timecode in it (it was a 24fps 16mm film material and it has to be rescan in 25fps...). Is there a way to do that? I mean beside of reedit everything in a 25fps timeline. The footage was quicktime prores 4444, I made merged clips of it and edited it then, so I have only merged clips on the timeline.
I would be very thankful for any suggestions!

Hi Richard, unfortunately I need to burn in Timecode from the source clips, so this won`t help me:/ but thanks for your answer! I think the only possibility for me is to create a new timeline in 25fps, modify the source footage from 24 into 25fps and reedit it. Is there any way to use command match frame (and reversed match frame) from merged clips in a timeline to source material from which I created the merged clips? so the source footage and not the used merged clip will be loaded into the source monitor? it would make a reedit much much faster...

Will my phone automatically change for daylight savings 2014?

I have to be at work tomorrow at 7. Will my phone automatically change over for daylight savings 2014?

kdsmini,
Sure...just make sure that you have Settings>General>Date & Time> "Set Automatically" selected.

CHANGE OVER FROM TAXINJ TO TAXINN

HI ALL ,
TAXINJ and TAXINN cannot co exist in the same system.
If you are talking about technical Upgrade, then I don't think this would be feasible since old Txn would have got posted with TAXINJ procedure with rates as defined in Tax codes and now after migration to TAXINN in same box, the system would pick value from Condition records.
Just check this basic point of feasibility before we go ahead and look for changes.
In SuN the change is for existing implementation, here at present they have R/3 4.7, and are now in the process of technical upgrade to ECC 6.00; TAXINN is required to be implemented in the upgraded version.
At present they are using around 129 pricing procedures, 25 sales org,220 tax codes in TAXINJ. Suzlon has 21 company codes, 219 plants and 1300 end users the whole nature of group activities results in use of all possible types of indirect taxes in India like VAT, CST, Excise, Service Tax etc...
i have tried to search on sap help, service market place and others but could not come across any document for the change over. However i will try again.
what are the things i need to take care before any implications busisneww point of view, what will be the status of open sales order and purchase orders, and splitting delivery docs. which are under process, what will be the cutoverstrategy.
need ur help and guidance, thanks in advance.
We are migrating from 4.7 to ECC 6.00 ( technical upgrade only), at the same time we will shift from TAXINJ to TAXINN,please let us know the steps requred to do this activity.
RELEASE NOTES OR OSSNOTES, ANY DOCUMENT STEP BY STEP IS REQUIRED asap.
CHEERS
SRI_CNU

Hi
Vasu Sri,
I got this document from some body might help u a bit.
Condition-Based Excise Determination in MM (New)
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), the system can calculate excise duties
and sales tax in Materials Management (MM) using the standard condition technique.
SAP has enhanced the existing tax procedure, TAXINJ, so that it now supports formula-based
and condition-based excise determination. The R/3 System also comes with a new tax procedure,
TAXINN, which only handles condition-based excise determination.
Which Tax Procedure Must I Use?
Existing customers must continue to work using the same tax procedure.
If you switch to a new tax procedure, you cannot display any documents that you have already
posted using the old tax procedure.
If you have worked with formula-based excise determination in previous releases and wish to
continue, you do not have to do anything. However, if you wish to start using the
condition-based excise determination method, proceed as specified below.
We recommend that new customers use the condition-based excise determination and tax
procedure TAXINN.
How Do the New Functions Work?
First, customize the system in the activities listed below. Then, for each material, create one
condition record for each form of excise duty and sales tax that applies, and enter the tax code
for purchasing documents (see below) in every condition record.
When you come to create a purchase order, enter the tax code in each line item. The tax code
tells the system whether to look in the condition types for formula-based or condition-based
excise determination
To set up the new excise determination method, carry out the following activities:
IMG activity
What to do
Check Calculation Procedure
Existing customers: Adjust your tax procedure to
match the changes to TAXINJ. Steps 560-583 are new, as are 593-598.
New customers: Create a copy of TAXINN.
Select Tax Calculation Procedure
New customers only: Assign the copy of
TAXINN to India.
Maintain Excise Defaults
New customers only: Enter the condition type
that you use for countervailing duty.
Define Tax Code for Purchasing Documents
Define a tax code.
Assign Tax Code to Company Codes
Assign the tax code to the company codes that it
is relevant for.
Classify Condition Types
Specify which condition types you want to use
for condition-based excise determination.
Define Tax Accounts
Check which G/L accounts the various taxes will
be posted to. Define G/L accounts for the account keys used in the tax procedure
6 MM
Materialwirtschaft
16.1 Country Version India in Standard R/3 System
Verwendung
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), Country Version India is no longer
delivered as an add-on but as part of the standard R/3 System.
Integration of functions in the SAP Easy Access menu
The functions for withholding tax have been integrated into the SAP Easy Access menu, under
Accounting -> Financial Accounting -> Accounts Payable -> Withholding Tax ->
India and Accounting -> Financial Accounting -> Accounts Receivable -> Withholding
Tax -> India.
You can access all other functions using the area menu J1ILN, which you can call from the
SAP Easy Access screen using the transaction code J1ILN.
Country Version India Implementation Guide
The Country Version India Implementation Guide (IMG) has been integrated into the standard
Reference IMG (see Changes to Structures for Country Version India).
Release Notes
You can access release notes from previous add-on releases using the links below.
SAP Library Documentation
The SAP Library documentation for Country Version India is also delivered on the standard
SAP Library documentation CD (see below).
New and Changed Functions
For information about new and changed functions for Country Version India, see the other
release notes for this release.
Auswirkungen auf den Datenbestand
You do not need to change any data.
Auswirkungen auf das Customizing
IMG activity
What to do
Activate Country Version India for Specific Fiscal Years
Delete the entry ZIND and
create a new entry for IND.
Siehe auch
SAP Library -> Financials or Logistics -> Country Versions -> Asia-Pacific -> India.
Release Notes from Country Version India Add-On (FI)
Release Notes from Country Version India Add-On (SD)
SAP AG
1
SAP-System
Page 9
Release Notes from Country Version India Add-On (MM)
16.2 Condition-Based Tax Calculation (New)
Verwendung
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), a new method for calculating taxes
in Brazil is available, which makes use of the standard condition technique. Tax rates, tax laws,
and special indicators that influence whether tax line items are included in the nota fiscal are all
stored in the system as condition records. An additional tax calculation procedure, TAXBRC, is
delivered for this new method, in addition to the existing one for Brazil, TAXBRJ.
Auswirkungen auf den Datenbestand
You can continue to calculate taxes using the former method: when the system processes the tax
procedure assigned to the country (TAXBRJ), it calculates the taxes externally by calling
function module J_1BCALCULATE_TAXES. We do, however, recommend that you assign the
new procedure TAXBRC and use the condition-based tax calculation functions, as it enables you
to flexibly adapt the tax calculation logic to cover new legal requirements or special customer
needs.
You will need to migrate your existing tax rate table entries to condition records, which you
can do directly from the Tax Manager's Workplace described below. You can check all tables
and subsequently convert the entries, whereby the system generates condition records. After the
initial migration, each time you create or change a tax rate table entry, the system automatically
generates a condition record as needed.
Auswirkungen auf das Customizing
If you want to employ the new condition-based tax calculation, you need to activate it and
carry out all related Customizing activities, under Financial Accounting -> Financial
Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Brazil
-> Condition-Based Tax Calculation, all of which are new:
o
Activate Condition-Based Tax Calculation
o
Map MM Tax Values to Nota Fiscal Fields
o
Map SD Tax Values to Nota Fiscal Fields
o
Map MM Tax Laws to Nota Fiscal Fields
o
Define Internal Codes for Tax Conditions
o
Assign Internal Codes for Tax Conditions to Condtion Types
o
Assign Tax Rate Tables to Condition Tables
In addition, you need to assign the new tax calculation procedure TAXBRC to the country in
Customizing, under Financial Accounting -> Financial Accounting Global Settings ->
Tax on Sales/Purchases -> Basic Settings -> Assign Country to Calculation Procedure.
A new Customizing tool called the Tax Manager's Workplace is available that enables you to
SAP AG
2
SAP-System
Page 10
make all tax-related settings for Brazil. You access it under the same path as above through
Tax on Sales/Purchases, then Calculation -> Settings for Tax Calculation in Brazil ->
Access Tax Manager's Workplace, or alternatively by entering transaction J1BTAX. You can
use the Tax Manager's Workplace regardless if you use condition-based tax calculation; it
simply brings all tax activities to a single transaction (only the Migration, Nota-Fiscal Mapping,
and Condition Mapping options under the Condition Setup pulldown menu are relevant only for
condition-based tax calculation).
16.3 Changes to Structures for Country Version India
Verwendung
As of SAP R/3 4.7, Country Version India is no longer delivered as an add-on, but forms part
of the standard system.
SAP has discontinued the Country Version India Implementation Guide (IMG) and has added its
activities have been added to the standard Reference IMG as follows:
Activities relating to withholding tax are now located in Customizing for Financial
Accounting (FI), under Financial Accounting Global Settings -> Withholding Tax.
Activities relating to excise duty and excise invoices are in Customizing for Logistics -
General, under Tax on Goods Movements -> India.
As far as the activities under Preparatory Activities are concerned, two of them (Activate
Country Version India for Accounting Interface and Activate Processes) are no longer
relevant and have been removed from the IMG entirely. The activity Execute Country
Installation Program is already included in the standard IMG under the name Localize Sample
Organizational Units. And the other two activities (Activate Country Version India for Specific
Fiscal Years and Activate Business Transaction Events) have been added to the standard IMG.
For information about other changes to the IMG relating to changes in the functions in Country
Version India, see the other release notes.
16.4 Release Notes from Country Version India Add-On (MM)
Verwendung
The Release Notes from Releases 3.0A and 4.0A of Country Version India for Materials
Managment (MM) are listed below. For more Release Notes, see the alias globalization in
SAPNet, and choose Media Center -> Country-Specific Documentation -> Country Version
India - Release Notes.
Release 3.0A
o
CENVAT Credit on Capital Goods After Budget 2000 (Changed)
o
Multiple Goods Receipts for Single Excise Invoices
SAP AG
3
SAP-System
Page 11
o
Enhancements to CVD Solution
o
Pricing Date Control in Excise
o
Order Price Unit in Excise
o
Alternate Assets MODVAT Capitalization
o
Enhancements for 57 F4
o
User Exits for Customer Validations
Release 4.0A
o
Procurement Transactions for Excise Invoices
o
New Transactions Based on User Roles for Incominng Excise Invoices
o
Capture Excise Invoices with Reference to Multiple POs for the Same Vendor
o
Capture Excise Invoice and Post CENVAT in a Single Step
o
Open Schedule Quantity Defaulted in Excise Capture for Scheduling Agreement
o
Accounting Document Simulation for CENVAT Postings
o
Rejection Codes for Excise Invoices
o
Single-Screen Transaction for All Excise-Related Entries
o
Stock Transfer Orders Through MM Route
o
Excise Invoices for Multiple Import Purchases
o
Customs Invoices Can Be Captured Using Logistics Invoice Verification and Conventional
Invoice Verification
o
Material Type at Line Item Level
o
Excise Invoice Capture Without PO
o
Excise Invoice Without PO - Capture and Post in a Single Step
o
Recalculation of Duty and Excise Defaults Restore Feature Available
o
Split of Nondeductible Taxes During Excise Invoice Capture
o
Error or Warning Messages Displayed at the Time of Saving
o
Reversal of Excise Duty
o
MIGO Solution Available as a Note 0408158 (Featuring All Functionalities as in MB01)
o
Excise Invoice Defaults in Excise Popup at Goods Receipt
o
Split Accounting Lines for CENVAT Posting
o
Authorization for Incoming Excise Invoices Extended
o
Authorization Available for Part I Entry at GR
o
Authorization Available for Register Update Transaction
o
User Exit Available for Incoming Excise Invoice Transaction for Defaulting Values
SAP AG
4
SAP-System
Page 12
o
User Exit Available for Incoming Excise Invoice Transaction Before Database Update
o
User Exit Available for Register Update for Validations on Fetched Records Based on
Selection Criteria
o
User Exit Available for Register Update of RGSUM Register
o
User Exit Available for Excise Invoice Create for Other Movements to Default the Excise
Details
o
Register Update Separately Handled for Receipts and Issues Based on Classification Code
o
Ship-From Vendor Can Be Defaulted and Captured in Incoming Excise Invoices for Other
Movements
o
Removal Time Can Be Captured in Excise Invoices for Other Movements
o
Field Selection of Incoming Excise Invoices
o
Transaction Code Customizing for Incoming Excise Invoices
o
Excise Group Setting for Part I Indicator for Blocked Stock, Stock Transfer Order, and
Consumption Stock
o
Multiple Goods Receipts and Multiple/Single Credit Settings Available at Excise Group
Level
o
Rejection Code Master Setting for Posting on Hold Is Available
o
Stock Transport Orders

Asset substitution rules for mass changes

Dear all,
I create worklist in order to use substitution rule for mass change.
But when running transaction AR31 I have following error message:
No administrator found for the task
Message no. 5W141
I found transaction OAWF but what must I do with this?
Thanks for your help.
David

Hi David,
In sight of resolving the error 5W141 when running the workflow in AR31, maybe following information can help.
1- Transaction OAWF: check if the responsible users are assigned to the workflow tasks
Menu path: Basic Functions
                               Assign tasks to agent
                                         Correct worklist
                                                  Release worklist
                                                            Correct and release worklist
2- Then also check if the users are assigned to the workflow-tasks in the basis-component (transaction PFTC).
   Menu path: Task type: TS   - Standard task
                         Task     : corresponding task
Also check the minimum customizing for workflow: SWU3 => automatic customizing
Maybe the following SAP Notes help you in addition:
127931 Workflow for Mass change in FI-AA from 40B on
322526 Analysis for workflow problems
152871 Release Upgrade considerations for workflow
Best regards,
Brigitte

Idoc for Material Change

Hi Experts,
The requirement is to receive a standard Idoc for material change and trigger the material creation process in case the material does not exist.
Secondly, what is the Idoc for material change?
Thanks and Regards,
Ravi

Hi,
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error.
hope this helps you.
plz reward if useful.
thanks,
dhanashri.

What to do for automatically change over of PHASE from 1 to 2 in case of multilevel method of depreciation.

Similar Messages

Maybe you are looking for