What to specfify in CA Reporting services integration (Report server web service URL) when using SSL for both SharePoint and SSRS?

Hello,
We are using Sharepoint 2010 and SQL Server reporting services 2008 R2.    We have the sharepoint site bound to port 443 using a certificate.   We also have the same certificate bound in the reporting services configuration manager's
web service URL tab.    In CA should we put the SSL URL or the non SSL URL?    Right now in CA it has the then non SSL URL,
http://fakehostname/ReportServer_REPORTSERVICE.     We have some sporadic issues and I am wondering if setting this to our SSL URL will help.    Please let me know
if you have any questions.
Thanks,
Sean

Hi,
Regarding this issue, it should be no issue for setting (https) according :
https://msdn.microsoft.com/en-us/library/bb630447.aspx
https://msdn.microsoft.com/en-us/library/bb677369.aspx
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0ada85b1-e2d2-44a8-8443-74eca74f5745/ssrs-cannot-connect-to-https-sharepoint-2010-401-unauthorized
I notice you mentioned that you have some sporadic issues, what are these issue? If there are errors, please post the detailed information about the errors.
What is the mode type of SQL Server Reporting Service, native mode or SharePoint mode?
The screenshot of the web service URL:
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

How do I find out what the name of the reports server is?

Hi Everyone,
I am connecting to a remote machine using gotomypc.com and have started up Reports Builder 10g. I know very little about installation of Oracle on this machine. Just enough to log into Oracle 10g and run tools like the Report Builder, TOAD, etc. When I run a report from the Report Builder I get a web browser with a blank report. It works when I run a paper report. I am guessing that the Reports Server is not running or not configured properly.
Can you tell me how to find out what the name of this Reports Server is and/or how to start it up?
Thanks.
Emad

I realize this is old, but... You can find out your servers name by looking at the $ORACLE_HOME\reports\conf\rwservlet.properties file. It has a entry for SERVER. Should also have a corresponding conf file after starting up OC4J and activating the server for developer installs.
Next, you can also run rwdiag. It will show you all report servers available to your installation. This is interesting when Multicast is used by Reports (10g). Ran into issues with servers named the same not on the hardware I was expecting.... ;)
Good luck.
BradW

SQL 2012 R2 - SSRS with the Report Server Web Service URL, can't access

Hello:
I am installing Dynamics CRM 2013. When I am on RS Configuration manager; I am running into the SSRS (SQL 2012 on Server 2012)SQL issue, can't access the
http://servername/:80/ReportsServer or
http://servername/:Reports web pages
The database server has SSRS native mode installed, it is using a domain account for the service credentials. This account also has permission to log on a service in the GPO
Account is a domain admin and is a local administrator
SQL server is 2012 R2 on Windows Server 2012. User base is less than 60 people and they have SharePoint 13 on the same SQL server. Server more than enough resources.
Any assistance would be appreciated.
Thanks..Dan

Hi DCas1,
According to your description, you could not access
http://servername/:80/ReportsServer or http://servername/:Reports web pages from Reporting Services configuration manager, SSRS in configured in native mode and the account you used is a local administrator.
In Reporting Services, URLs are used to access the Report Server Web service and Report Manager. Before we can use either application, we need to configure at least one URL each for the Web service and Report Manager. If we are using the Reporting Services
Configuration tool to create or modify the URLs, we can accept the default values for a URL or specify custom values. When we create a report server URL, we must specify the following parts: Host name, port and Virtual directory. In order to improve the efficiency
of troubleshooting, I need to ask several questions:
Since the default URL is http://<computername>/reportserver, did you type the URLs manually? or the URLs configured in Reporting Services configuration manager are
http://servername/:80/ReportServer and
http://servername/:Reports?
Could you provide detailed information of error log(default location: %programfiles%\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles)?
For more information about Configuring a URL, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms159261(v=sql.110).aspx
http://msdn.microsoft.com/en-us/library/bb630447(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

What 2 do with 6i reports 4 web deployment?

hi Dear!
What 2 do with 6i reports 4 web deployment?
because i m biginner 4 web deployment (web publishing)reports.
What should i do 4 immediatly getting started with reports?
Can any body give me the idea or any concise document about this?
Thanks
Rana Adnan

Usually you don't have to do anything. Your rdf or rep files can run both in client server or web mode.
Go to OTN for tons of info on the subject, e.g. http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm

Sharepoint and SSRS report trust relationship ssl/tls secure channel remote certificate is invalid

I have no experience with sharepoint at all. but this is what I observed.
I intermittently getting this error message on my sharepoint. could not establish trust relationship for the ssl/tls secure channel. Remote Certificate is invalid according to the validation procedure.
Screnshot of the error
This is how the sharepoint page layout.
I have report.aspx. and below is the content of the aspx file.
The url is http://sharepoint.COMPANY.com/Pages/Report.aspx.
The URL is intranet only.
The sharepoint is hosted in SERVER1 and the SSRS is hosted in SERVER.
I observed this error happens on both HTTP and HTTPS http sharepoint COMPANY com/Pages/Report.aspx OR https sharepoint COMPANY com/Pages/Report.aspx
So far, the step I did was to follow this blog http://krishnasangani.blogspot.ca/2013/06/the-remote-certificate-is-invalid.html Restarted
IIS in SERVER1 AND SERVER2. but the problem persist. Another I have done is to click the certificate in internet explorer and everything looks ok on that side to (certificate is valid)
It seems to only happen earlier during the morning, then it fixes itself around 9 Oclock. It has been on going for about 2 weeks. Please help troubleshooting this.
<%@ Page Inherits="Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bsasdasdasd9c" %> <%@ Reference VirtualPath="~TemplatePageUrl" %> <%@ Reference VirtualPath="~masterurl/custom.master" %><%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bsasdasdasd9c" %>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:547SF010-65B3-11d1-A29F-00457845FFSW"><head>

<title>Report</title></head>
A few questions I have in mind is Any pointer to troubleshoot this problem AND By looking at the ASPX file, Would you be able to determine what method is my Sharepoint page calling the SSRS report , integrated mode, native mode? IEFrame? The reason I am asking
this is that maybe IF I google using the right terminology I can get to the similar problem and solution.
Thanks

Please let us know if you are using
SharePoint communicates to an external service via HTTPS
Please try perform following steps:
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
In SharePoint Central Administration site, go to “Security” and then “Manage Trust”. Upload the certificates to SharePoint. The key is to get both the root and subordinate certificates on to SharePoint.
The steps to get the certificates from the remote server hosting the WCF service are as follows:
1. Browse from IE to the WCF service (e.g., https://remotehost/service.svc?wsdl)
2. Right click on the browser body and choose “Properties” and then “Certificates” and then “Certificate Path”.
This tells you the certificate chain that’s required by the other server in order to communicate with it properly. You can double-click on each level in the certificate chain to go to that particular certificate, then click on “Details” tab, “Copy to
File” to save the certificate with the default settings.
As an example, get both VeriSign & VeriSign Class 3 Extended Validation SSL CA.
reference : http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Report Server Web Urls

Hi,
SQL 2008R2 (Standard)
Windows Server 2012
Having problems accessing SSRS on a new commissioned SQL server. In the "Web Service URL" page of the "Reporting Services Configuration Manager", I'm clicking on the link next to the label "Report Server Web Urls". I'm
prompted for a domain username/password, none of which appear to work - the credentials box just keeps reappearing.
I know these credentials are OK as one of them is my own domain username/password.
There is nothing around this time in the event log or the SQL server log(s), however there are a number of these much earlier on:
Login failed for user '***\*****'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
I have since rebooted the server and tried again, same result but there is nothing of value in the logfile
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
Or in the logfiles available from SSMS.
Any ideas?

Hi The real Slartibartfast,
According to your description, when you tried to access SSRS on a new server, you got the error message: Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>].
State 11 corresponds to “Valid login but server access failure”, which means that SQL Server was able to authenticate you, but weren't able to validate with the underlying Windows permissions. It could be that the Windows login has no profile or that permissions
could not be checked due to UAC. To troubleshoot the problem, please refer to the following steps:
If the login is directly mapped to the list of available logins in the SQL instance, then check if the SID of the login matches the SID of the Windows Login.
Turn off UAC or running SSMS as administrator.
For more information about specific Login Failed error messages, please refer to the following blog:
http://blogs.msdn.com/b/sqlserverfaq/archive/2010/10/27/troubleshooting-specific-login-failed-error-messages.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???

I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???

Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

HT5787 i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

It's not stolen ,that iphone came from canada to Egypt and me activeted it last night i got the acc from the owner
Thanks for Replay Mr

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i

What to do when you pay for an application and it ...

What to do when you pay for an application and it fails to install? I paid for an application, but it fails to install. I have no idea how to contact Nokia (the ovi store is quite bad in this). Also, does anyone have technical suggestions of were to look at to troubleshoot?
Rimugunides O'Brian

You can contact Nokia using the "Contact us" tab to the top right of this screen. I am sure they will be able to assist you or at least point you in the right direction.

What is the difference between the plan i currently have now and the 9.99 a month for both photoshop and lightroom?

I currently am paying 29 dollars a month for just photoshop.. there is an option for 9.99 a month for both that and lightroom? what is the difference?

This document explains the differences between the Creative Cloud Photography Plan and the Photoshop single app plan - https://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Thanks
Bev

I can't download the latest update 5.0.1 I've tried several times and it gets to the end of about 70 minutes of downloading and then says the server timed out. Had the ohone for a year and no trouble until now. Please advise what to do. Thanks.

I can't download the latest update 5.0.1 I've tried several times and it gets to the end of about 70 minutes of downloading and then says the server timed out. Had the ohone for a year and no trouble until now. Please advise what to do. Thanks.

DIsable your antivirus and firewall.

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

What to specfify in CA Reporting services integration (Report server web service URL) when using SSL for both SharePoint and SSRS?

Similar Messages

Maybe you are looking for