Whats the best way to connect my tv to my JVC Projector tv?

I have a newer tv and I have a JVC Projector tv I want to connect it to the tv but it has no hdmi inputs. My Charter box as a place to plug in an hdmi cable, but I don't think its an input. I do know the tv only has s-video and component cable inputs, but if there is a way of "dumbing down" to component or going through the cable box I don't know how to go about doing so. Anything?

Not all HD tv's are capable of accepting 720p, it would be worth checking with your manual or your manufacturer.
We don't have netflix in the UK, but I understand it too is protected by HDCP and so a compliant converter will not work. Sorry I can't recomend a non compliant converter it's against the Terms of Use for these communities.

Similar Messages

  • Whats the best way to connect mac mini to my DAC

    I want to connect a mac mini to my DAC to then connect to my home stereo. The input options on the DAC are usb (b), coax digital & toslink optical. What is the best way to get the digital audio out of the mac & then into the DAC?

    IAW these specs:
    Features:
    USB: 24/96 up sampling to 192 Hz
    Toslink and coaxial: 24/192Hz
    Galvanic Isolation: ADuM 1250 chips
    Asynchronous Burr Brown Chip AD1896
    DAC Chip: PCM 1798
    R Style Transformer
    State of the Art Components: ESA Clarity capacitor filters, gold plated RCA jacks
    (Although this was copy pasted from your DAC maker's web site, it should be 192 kHz not 192 Hz.)
    The Toslink would be a better choice because the USB would have to use up sampling to reach 192 kHz. The USB would work though. Use a USB cable from the Mac to the DAC. Then use the Mac's Audio Midi Setup to select your DAC.
    The audio output jack on the Mac is a combination Line Level Analog output and a Laser Toslink digital output. You can buy Toslink cables that have a miniature phono laser plug on one end and the more standard Toslink on the other.
    Or, you can buy a miniature phono to Toslink adaptor.
    plus a cable
    Note: If you don't have any digital source material above 96 Hz, then the USB and Toslink connection would be toss up, sic.

  • Whats the best way to connect multiple iphones, ipads, ipods with multiple accounts to one mac

    I have iPhone 5s, ipad 4th gen ipod classic and mac mini on one itunes account with iphone 4s with ipad 1st gen on another account (wife's account) and also want to be able to add to this in the future. I want to connect through the mac mini and be able to use music movies calanders reminders etc through all our i's, whats the simplest and best way to go about this, before i start down the wrong road.

    Ok, here is the link to the original thread.  The key, for him, was that all of the pads used the same apple id, and needed to be set up identically.
    https://discussions.apple.com/message/15456170#15456170
    The other trick they use for distributing materials for whatever class was using the pads, was to create an e mail account that they all had acees to.  The documents, pdf, or whatever, would be e mailed to the account.  Each kid accesses and downloads the email.  Does whatever they are supposed to do, and e mails the done result back to the mailbox.     Easy for the teacher and the kids.

  • Whats the best way to connect to an HDMI TV for presentations?

    I have an HDMI 15 ft cable with two male ends. They do have wireless where I wil be but not sure I trust it.

    If you can't trust the WiFi and/or they don't have an Apple TV or a projector that has an iOS app available, then you'll need Apple's DIgital AV adapter with the appropriate connector for your iPad; 30-pin or Lightning connector.
    Regards.

  • What is the best way to connect a MacBook Pro to my HiFi system ?

    Hi,
    I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
    Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
    My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5  CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ? 
    I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
    Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
    Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
    Thanks in anticipation of some advice.

    What is the best way to connect a MacBook Pro to my HiFi system?
    Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
    The Mac's  analog audio in/out ports doubles as a optical in/out ports.
    The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
    Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
    To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
    Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
    I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
    It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
    If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
    If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

  • What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI

    What is the best way to connect my new MBP to a computer monitor?  DVI, VGA or HDMI?  Thanks

    I recommend the Apple MiniDisplay Port to DVI adaptor.  I would avoid VGA.  MiniDisplay Port to HDMI will work as well (3rd party).
    http://www.apple.com/search/?q=dvi%20adaptor&section=mac&geo=us

  • What's the best way to connect the audio out of my Mac to my stereo receiver?

    I want to listen to my mp3 collection through my home theatre stero receiver.
    I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
    I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
    I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
    The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
    I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
    I even hear these flaws when I listen to headphones through the headphone out of my mbox.
    Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
    I got this one from monster thinking it should work. No dice.
    So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
    Why might I be getting these clipping distoritons?
    any advice would be fantastic

    It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
    http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
    However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
    http://www.apple.com/itunes/airplay/
    I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
    http://www.apple.com/airportexpress/
    You can even find refurbished ones on Apples website for about $79.

  • What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

    What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

    If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out

  • I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

    I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

    Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

  • What is the best way to connect MBP 13" - (non retina) to HDMI TV input

    What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
    ...To get Video and Audio? With one cable ...
    I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
    I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
    I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
    Thank you!

    Look for something like this:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
    Ciao.

  • What is the best way to connect PumpWorks to Labview? DDE or OPC

    What is the best way to connect quizix PumpWorks to labview?
    PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or  DDE?
    Solved!
    Go to Solution.

    Hi.
    If the instrumet can communicate with an OPC server I think both methods are fairly equal.
    There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.
    http://zone.ni.com/devzone/cda/tut/p/id/4531
    http://zone.ni.com/devzone/cda/tut/p/id/7450
    -Tom

  • What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

    what is the best way to connect my ipad to the high speed inernet connection in a hotel room

    every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
    As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
    most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

  • What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

    What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

    It should be possible to network them easily.
    Ethernet will be the most straightforward. There is no question that you can plug both Macs into a normal network and they can share files if you turn on File Sharing.
    The iMac has a Gigabit Ethernet port, and if the G4 also has Gigabit Ethernet, that will be a very fast connection through a gigabit-capable Ethernet cable or router. Otherwise both can use the slower Ethernet speeds with no problem.
    You can also network the two machines via a FireWire 800 or FireWire 400 cable if necessary, and use File Sharing that way too. Finally, you can put one Mac into FireWire Target Disk Mode, which turns it into a hard disk that the other Mac can see, but this is the least flexible since one machine goes out of service, and it's probably no faster than Gigabit Ethernet.

  • What is the best way to connect a Iphone 6 to a RCA input TV?

    Hello, hopefully someone can help me out. What would be the best way to connect a Iphone 6 to a TV that only has a RCA input? Thanks for the help.

    don't believe you can RCA is just a connector both composite and component use RCA connectors both are analog and only component support 1080i composite only support 480i or something
    apple used to have pin30 -> both composite and component but with airplay mirror those went absolete

  • What is the best way to connect macbook running sling adapter to the tv

    what is the best way to connect macbook running slig adapter content to the tv

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

Maybe you are looking for

  • E-recruitement Error " When creating Job Posting "

    Hello Friends We are usinng standard  BSP HRRCF_POST_LST for posting the Job. But when after releasing the job i go on th job posting page and when i click on  "CREATE JOB POSTING " button i'm getting the following error. Business Server Page (BSP) e

  • External Drives not on Desktop

    I have a Power Mac G4 running on 10.5.7. 2 days ago, when I powered up, one of my Lacie drives (firewire) and my ipod (USB) no longer appeared on the desktop. They are both still interfacing, because the Lacie powers up and the ipod goes into charge

  • Cr XIR1 to create a custom function to change the timestamp of a field

    Post Author: palm CA Forum: Crystal Reports Hi, I am trying to create a custom function to change the timezone of a field in the report depending on the timezone selected by the user in the prompt I wrote a SQL Expression to do this , but i ended up

  • How do I create HTML mail using Mac OS X Mail 2.0.7?

    I know how to create an HTML page. How do I send it as HTML e-mail? OS X Mail receives HTML e-mail. It's kind of hard to believe it can't send it as well. I've tried pasting it in and attaching it - neither works. Any ideas? Thanks, Jim Carruth iBook

  • Book preflight with InDesign CC Server

    Hi, I'm trying to preflight a book using InDesign Server CC. Preflight seems to be done (takes somes seconds) but no pdf report is generated. Same code works perfectly on InDesign CC Desktop. Even tested to first write 'Coucou' to the file (just to c