When attempting to burn a dvd to a memorex DVD Rdl 8.5GB blank disc, the program says it's not a recordable disc. The content is a 6.5GB Quick Time Conversion video.

When attempting to burn a Quick Time Conversion video to a Memorex DVD+Rdl, 8.7GB blank disk, the program reponds that the dic is not recordable. It's a new blank disk. The video is 8.29GB in size.

Hi
I see two problems
• Memorex never worked OK on Mac when doing Video-DVDs - I only use Verbatim (more organic dye in them)
• Size in Gbs - iDVD doesn't care about Gbs at all only duration. And Duration is the sum of Movie time AND MENU TIME.
I have 500Mb files that are to large to fit and 50Gb files that fit's nicely.
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
Yours Bengt W

Similar Messages

When attempting to burn a 1.2GB video using Magic DVD I get Burning Prep error. Not enough free disk space...... I have tried all I know to no avail. This have just started!!

When attempting to burn a 1.2 GB video using iDVD I get a "Burning Preparation Error.. Not enough free disk space for encoding the remaing assetts" This has only justed started to happen. I have used this programme many times before in the past. Can any one help as I have tried all I know?

Yes, 44GB is sufficient. I don't think space is the problem. I don't know about iMovie but iDVD can only use the boot drive for its scratch disk.
You might be getting that error due to some damage file in the project.
Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
Also run Disk Utility and verify the disk. If errors are indicated you will need to boot iknto your system install disk and repair the disk with Disk Utility (see the Utilities menu in the first window after the language selection window).

Sense Code 0X00023A02 error when attempting to burn RW

Hello. I am recieving this error when attempting to burn from to a DVD-RW or a DVD+RW. I know the first thing that is going to be mentioned is additional software such as on the "things to avoid" list when burning DVD's, however, I have all versions of Encore that have been produced, so I simply uninstalled 2.0 which was giving me the error code, and installed 1.5 and was able to burn a project with the same exact disc. I uninstalled no other software and did nothing else, besides rebooted, which I always do when I install and uninstall my applications. Therefore my thinking is that it is within Encore. It also with another RW in 2.0 states that it cannot erase the disc even if I do not have auto erase selected, and the disc was previously erased with Nero. I am actually sort of angry because I purchased a new burner to test out this error that I was recieving, and while I can indeed return the burner, I noticed others are being advised to check other software they have on their system. I have none of the software listed on the detrimental applications that may interfere with the burning process and I also now have (2) less than a year old burners along with a "not soo inexpensive" application that in essence does not work in a way I need it to. Yes, I can uninstall 2.0 and simply use 1.5, but I should not have to do this. And though I know this is not going to be answered by Adobe techs, please take note that the burn "Does complete without error simply by uninstalling 2.0 and installing 1.5 and creating the same exact project with the same source files". Therefore there is something within 2.0 causing these errors.
Damon

Neil and Jeff, thanks for the response. I am running a 965P chipset board and my PATA is connected via the JMicron controller, so my drive do not appear this way. It only shows the General, AutoPlay, Hardware and Sharing tabs. This is something that is an issue with this chipset from what I am being told. However, if this were the case(and god no man, no roxio installed on the system), shouldn't it be interfering with 1.5 burning the project also? This is why I am soo set it being 2.0 since 1.5 burned the project with no issue whatsoever. It's only in 2.0 that it is stating this error with the +RW or with the -RW it is stating that the disc cannot be erased. I understand completely what you all are saying, but I honestly do not believe this is the issue since one version of Encore will work and the other will not, unless something has changed in Encore 2.0. I understand that it was pretty much re-written(I was on the beta myself), but at that point, I never needed to use RW's, so I did not test with them, otherwise I would have reported it.
I cannot even get into the drive for recording via the Device Manager, so changing this option is not a possiblity. It is unfortunate that from what I have seen only one mfg makes a SATA dvd burner, and from what I have read, it isn't that great of one.
I am just at this point lost and wondering if I should simply return the burner I purchased and buy an external USB 2.0 unit and see if it works with that. What do you all think?

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this.

When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this. Any thoughts?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

TS3623 I had interruption on rented movie when attempt to return to movie , no library and said to go to downloads , guess what no download setting , will not allow repurchase through Apple TV now have to repurchase through iPad *** have you done to the o

I had interruption on rented movie when attempt to return to movie , no library and said to go to downloads , guess what no download setting , will not allow repurchase through Apple TV now have to repurchase through iPad *** have you done to the old syst

Thanks for the pointers folks. Yeah, 1.5GB is pretty poor isn't it? There are other suppliers, but you have to get a their phone line installed to access the internet so it's an £85 setup fee plus a day off work for a guy to come round and drill a hole in your wall before you even get to the monthly costs.
Don't get me wrong though - I'm certainly not an Apple basher, but am equally frustrated with both them and the ISP.
Virgin Media spend all kinds of money advertising their broadband as the fastest in the UK, but don't tell you (up front anyway) that you'll be cut off if you actually try and use it.
Apple on the other hand carry on with their 'it just works' mantra, but with Apple TV this only applies if you meet certain criteria (again, not mentioned up front).
I guess it aint a biggie, as i was gifted my Apple TV, and love all the other stuff it does, but from the number of posts on this forum can see that there's a lot of angry customers out there who want explanations as to why they're having similar problems to me.
Will be very interesting to see if Apple release any kind of software update that turns the flash drive from a buffer to permanent storage, to at least ease some of the pain...
Message was edited by: McGinty

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
Thanks

You have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
    for(int k = 0; k < symbols.length; k++){
        String symbol = symbols[k];
        if(s.equals(symbol))
            return k;
    }You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
}

When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

Does it always happen at the same time during the export?
Can you play through the entire Sequence in FCE without any problems?
What are your Sequence settings in FCE>
Have you rendered fully prior to exporting?
Which export settings did you use?
-DH

Trying to export a small video using Quick Time conversion

Hi...i apologize if this is a stupid question...i'm still kind of new at FCP. I'm trying to export a small one and a half minute video into a Quicktime file that's less than 1 GB. I exported as a Quick Time movie and it came out to 2.6 GB. I tried compressing using Compressor that and it took over 2 hours so I canceled it. I then tried exporting using Quick Time conversion and it came out to 66 MB, which is more what i'd expect. Except that the picture was only in the upper left hand corner of the Quick time viewer...the rest was black. I tried adjusting the dimensions, etc. but it didn't work. Any idea why this is happening? Are there some standard settings I can use for this? The video is for the internet so I'm not too terribly concerned about the picture quality. Thanks.

What format is your media, Easy Setup and what are your Sequence Settings?
They should all match.
When you export, do so using the following path: File > Export > Export to QuickTime.
Make sure that "With Current Settings" and " Make Movie Self-Contained are selected.
This will give you an independent movie that is not compressed and uses the same codec as your source material.
Depending on how you want to deliver your movie will determine what happens at the next stage.
Post some details about it.

Final Cut Express Quits when exporting using Quick Time conversion to MPEG2

I'm new Mac user and I'm trying to compress a movie from Final Cut Express HD when exporting using Quick Time conversion to MPEG2 format when I do that Final Cut application quits.
and if helps you to answer I have the same problem trying to do the same from iMovie HD and from Adobe Premier 6.5

"exporting using Quick Time conversion to MPEG2 format"
I'm not sure how you can get to that point: I cannot even find MPEG2 in my list of compression types while exporting with QuickTime Conversion... (I have 31 of them, and QT 7 Pro installed).
In any case, if you want to make a DVD and have iDVD installed, you have simply to Export/QuickTime Movie (without conversion): iDVD will take care of compressing your movie for you before burning the DVD.
Piero

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

One of my friend stole my iphone 5 and he knows my password for the phone but he's not using wifi or the sim network cause he knows that I enabled find my iphone and I wanna lock it or burn the phone he is using my pictures

one of my friend stole my iphone 5 and he knows my password for the phone but he's not using wifi or the sim network cause he knows that I enabled find my iphone and I wanna lock it or burn the phone he is using my pictures and he has shared most of my pictures and the find my phone says it will erase the phone once it will be contact to the internet
what about if he didn't? what to do pls I need to lock the phone as soon as possible am living in saudi arabia and we dont have apple store here to support me I need to contact anyone in apple store so I can give him the serial numbere and IMEI so they lock the phone with out waiting him to contact to the internet
I made a report but the problem is it was stolen from of my best friends and I dont know which one we were 4 persons in my house so I dont know which one exactly but it seems I was unlucky to chose them as best friends and trusted them for 2 years and now he's shairing my privte pictures which has dameged my life and if the goverment saw my pictures they will but me in jail for those pictures which is noraml gay pictures but our country difficutl pls any one help me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

How do I export a Final Cut Express 4 movie using quick time conversion without stretching the image?

I have created a movie in Final Cut Express 4 using videos and still photos of various aspect ratios and resolutions. Some of the photos are verticals. When I try to use File>Export>Using Quick Time Conversion, my images end up being stretched horizontally when the video is finally processed. I have tried preserving the aspect ratio but the video still ends up stretched horizontally. What should my settings be in Quick time conversion? I just want to make a video for YouTube.
Thanks. -Bob

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.

when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

MBP shuts down when making Quick time conversion

MBP core duo 1.83 2G ram current updated software.
It shuts down when I try to do a Quick time conversion..
went to the Genius bar and booted from another drive and my macbook still shut down when doing a QT conversion. He says that means it is NOT a software issue.. blames the logic bd.. 310. for a fix if I send it out.. they would keep it overnight and do testing for free.
the console says "previous shut down cause: 3"... He said that was a code for shutting down by holding the button for 4 seconds and got all puzzled about that.
I have been able to convert files using Compressor which I have to do before I can use the go pro video in final cut.
it might have shut down once during a conversion that way.

Monitor your CPU core temp and see at what temp the computer shuts off. Also, download SystemLoad and run that for awhile to stress the processor. See if you can get it to shut down with that and at what temp.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

When attempting to burn a dvd to a memorex DVD Rdl 8.5GB blank disc, the program says it's not a recordable disc. The content is a 6.5GB Quick Time Conversion video.

Similar Messages

Maybe you are looking for