When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate.

Similar Messages

  • Using iMovie-does anyone knows how to put two videos side by side in the same screen/

    Using iMovie-Does anyone knows how to put two videos side by side in the same screen?

    See iMovie Help here.
    http://help.apple.com/imovie/mac/10.0/#movb8c659f55

  • Why must I force quit (double press home and slide off) Mail on both my iPad and iPhone in order to have Mail access on my iMac on the same wifi network. Fetch is set to manual and my ISP is Charter.

    Why must I force quit (double press home and slide off) Mail on both my iPad and iPhone in order to have Mail access on my iMac on the same wifi network. Fetch is set to manual and my ISP is Charter.

    I don't know about the "3" but it's a POP account. I've always suspected that Charter isn't letting go using their mobile apps for iOS. Puzzling that it doesn't block the other way. That is if Mail is open on the iMac it doesn't block access to Mail on either the iPad or iPhone. I'm guessing it's their mobile apps that are the problem but they won't admit it to me.

  • TS1424 Trying to DL a free app & I'm getting a message saying my billing info is needed because my security code is wrong. Once I put it in,I'm still getting the same error message

    Trying to DL a free app & I'm getting a message saying my billing info is needed because my security code is wrong. Once I put it in,I'm still getting the same error message

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/

  • When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.

    When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.

    Make sure you don't have Repeat turned on.  While the song is playing, tap the screen (cover art) if necessary to bring up the extended music controls (see image below).  Then tap the Repeat button until it turns white (which is off).

  • ITunes match tracks different volumes from the same album

    Using iTunes Match.  Among other reported problems, after downloading Matched tracks to my master iTunes library to replace lower bitrate versions, the new tracks from the same album have different loudness or volumes between the tracks.  Is this because iTunes Match is matching the songs to different versions of the same album?  Where some albums have been 'remastered' or such, that the recorded volume between the albums is different?  But instead of matching tracks to the same version of the album, some are being matched to different versions of the same album?
    Quite offputting to listen to a single album where track to track loudness changes suddenly.
    PS, I'm not using SoundCheck on my Mac.

    Same problem here. I'm an "album" kind of music fan and when I'm listening matched albums that the sound quality and voulme changes I get really put off. Case in point B-52's self-titled album: tracks 1,2, 5 & 7, nice and loud; 3, 4, 6, 8 & 9 tiny sounding in comparison...Hello?  So far iTunes Match is not worth my money. I'd like to hear form an Apple iTunes Match repersentative to know if this issue will be resolved. As it is, is not very useful. Please fix the problem. Also many of my albums show that a track or a few will not be matched but uploaded to the cloud which means more of my albums will be spotty sounding as tracks will have different bit rate, etc. There is no real excuse for not matching whole albums as oppose to single songs. I read somwhere the 'typical" case of the Beatles "Abbay Road" album not matching "She Came In Through The Bathroom Window" on most users. I think is silly to say the less. Albums matching not single songs, please!!!

  • Track several object at the same time

    Hi everybody,
    I`m actually trying to tracking several same objects at the same time.
    I knew how to do with only one object, and I was able to send the coordinate for each frame in excel. So great.
    But now I`m trying to modifiy the code to follow eight objects at the same time.....
    My code was already HUGE with one or two objects, but I need to add again 6 part of the same code....
    I would like to compact and contract my code to be more clear.....
    I suppose there is one solution juste after Labview vision assistant. And i`m sure that there is a way to put all the code to delete the zeros in only one for loop but I didn`nt find the right way....
    Anyway if there are some propositions or some ideas, advices..... it`s welcoming
    Thks a lot
    Sincerely
    Maxime 
    ps: I put my codewith only two patterns
    Attachments:
    Simple tracking.vi ‏146 KB

    Yeah -- you have 4 separate tracks with the same audio? Select all 4 tracks/clips in your Event and select Synchronize Clips. You end up with a compound clip in the event with all 4 clips synchronized to the audio. Open the compound clip in a Timeline and select all 4 clips. Use  Video > Transform and type in ~48% (if you want the "gutters") to resize all the clips at once. With the transform icon (lower left corner of the canvas) selected, drag each of your clips out to the four corners (or type in exact position values in Video > Transform > Position parameters.) To get the white background, you can use Generators > Elements > Shapes - set the color to whatever you like; select Rectangle from the drop down and Video > Transform > Scale to expand it to full screen. Drag the generator underneath your storyline to use as a background.
    If you don't have audio to synch to, you can create multiple storylines. Add the first clip; reset the playhead and select your other clips that will appear in a 4-up and type Q to *connect* them to the storyline. Then select each one separately and right click > Create Storyline (or type command - G). You can then open each storyline in its own timeline (right click and select Open in Timeline) and append more clips to each "track". Back in the main storyline, drag out each connected storyline to reveal any appended material. The trim control will turn red when you reach the end of media in the created storylines. Resize and arrange as described above.

  • How can I stop iTunes from putting in a list of podcasts episodes the same episodes I already downloaded?

    If I download a podcast and delete it, when I refresh podcasts, I see the same podcast show up with the cloud next to it, as an option to be downloaded. This makes it impossible to keep track of what I already listened to. I dont want to keep the old podcasts on my computer after I'm done with them. What can I do about this?!
    thanks!

    If I would've read the whole post, I would've seen that. Sorry.
    Strange though. Hope someone a li'l more helpful can find the answer you're looking for.

  • Can takes from more than one track be comped at the same time?

    Greetings,
    I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542&#9527542), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
    Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
    Any suggestions?
    Thank you.

    You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.

  • How to put 2 kinds of material prices on the same sales order

    Hello SD Gurus,
    I have a requirement to put a one-time price (e.g. installation price ) and a recurring monthly price on the same sales order.
    I've tried the following but it is not working.
    1. I have a pricing procedure (PSER01) in which I'm using the following price types:PR00 (Defined as a "Discount or Surcharge") and PRSV.  I'm using PR00 to represent my one-time installation price.  I'm using PRSV to represent my monthly+recurring price.
    2. I used it for a material master in a sales order.  I can add PR00 and see the green traffic light.  But as soon as I add PRSV, the traffic light on PR00 turns yellow (Inactive because of subsequent price).
    I've read several posts on the forum regarding this.  Based on my understanding, I'm using two pricing conditions in one pricing procedure which is not allowed. 
    What can I do differently to enable the one-time price and monthly price to appear for my material master on the sales order?
    Thanks so much for your help!

    Hi,
    As per SAP Logic, if the condition type has condition class "C" then only one value is allowed.
    if you want to add two values ( Fixed + Variable) then you can do the following logic.
    1 ) Have one condition type  say ZFIX ( Use this for Fixed Value ) cond class = C
    2 ) another condition type Say ZVAR(Use this for  variable value ) Cond Class = C
    3 ) another condition type say Zxxx ( use this for your Final Value) cond class = C
    now do not assign any access sequence to the third condition type. write a logic in the "Alt Calculation type " routine to get the value of this condition from the sume of ZFIX + ZVAR
    i.e., ZXXX = ZFIX + ZVAR.
    Make sure that the sequence of the codition types are mentioned exactly like the above.
    this is because if you put ZXXX third then the system automatically ignores the value of ZFIX and ZVAR.
    but the values against those condition types will be stores internally. So in future if we want some information also we can trace back..
    let me know if you need further help..
    thanks..

  • How do I get 2 tracks to play at the same time

    I don't understand what's going on or what to do about it.
    I have a track Kits that I can add any (apparently) kind of sound to, but when I drag a bass to a new track it's gray and won't play, or else it will play but not the Kits track. And why is it gray, I thought gray would mean 'grayed out', won't play but no.
    Then, somehow a yellow bar has appeared over the first 5 bars and those bars will loop...unless I take the playhead past them--while the music is playing--and subsequent bars will play. But if, when the music is stopped, I set the playhead past those first 5 bars and press play the music starts from the first bar.
    You'd think the yellow bar would indicate some kind of rendering, but not that I can tell.
    I'm on a fairly new MB Pro. Seems like my old one with the older version of GB didn't have these hangups. I look through the drop-downs or fiddle with some things, but don't see anything to correct the problems.
    Any ideas?
    Thanks.

    Thanks for the help folks, sorry I've been away.
    I'd love help with the problem of why I only one track seems to accept clips to play. When I drag them to other tracks or create a track by dragging the clips are grayed out and won't play, but if I drag them to the one track where they're blue they play.

  • Put in strong voice & text encryption don't let U$A spy and see adaption go like a rocket

    I despise having peaking toms able read and listen to everything I do. If you put in encryption without a back door this OS will spread at the speed of light. Also include a way to tell people if the feds make you give them access but with open source code lots of people can see if that happens.

    Not a support question, so locking. Mozilla defends our users against all unlawful requests for information and is a member of http://stopwatching.us/

  • Still the same issue: Scrolling problem in itunes w/ dual screen setup

    Hey there,
    I am getting really ****** here. For 2 months this problem has been bugging me. It seems to randomly appear and disappear.
    Just have a look what is happening here: http://www.youtube.com/watch?v=N2m4G6c2Tqo
    I basically tried everything.
    1.Reinstalled Windows from scratch twice!
    2 Reinstalled Itunes a couple of times - clean install - tried different versions. Yea, got the latest one now.
    3. Tried different VGA drivers. Got the latest Intel driver installed.
    The problem has been gone for a couple of weeks now ever since I uninstalled a Windows update called U2711 Dell Display driver (The U2711 is my current LCD). That was just a 80KB file that messed Itunes up.
    Well, I believed I found the problem (hail system restore) but nope. Today it started happening again. I even have Windows Update deactivated for that reason so no changes have been made to the system in the last couple of days! It worked fine yesterday.
    So again: Same scrolling problem. And it only happens on my second large 27" screen. On the notebook screen it works just fine.
    Guys, I really need help. I'm about to curse Apple and Microsoft at the same time.
    Cheers
    K

    Since I am that furstated I started trying really unorthodox methods to resolve the problem.
    I just started Itunes in compatibilty mode (Windows XP SP3) and for now it seems to be working without that annoying bug!
    Anybody know what that means?!

  • Kontakt instruments playback in Logic Pro 9 but they don't bounce to disk.

    After much searching and random attempts with settings in both Logic Pro and the Kontakt player, I haven't found a way to send the playback from the Kontakt player to Logic Pro. In Digital Performer (e.g.) it's accomplished by recording real-time playback of the MIDI-to-Kontakt (or other player being used as a plugin) and then drop the audio file into an audio track. I don't see a way to do that in Logic. When I bounced in realtime I heard the Kontakt instrument but it wasn't recorded. Any help would be greatly appreciated! Thanks.
    MacBook Pro, M-Audio Fast Track Ultra

    I believe I am running it as a plugin. Kontakt is checked in the Audio Units Manager as available in Logic Pro and it appears in the Library when I create a stereo External MIDI track. If I create a Software Instruments track (which doesn't see Kontakt), I can reassign the track as a MIDI Instrument and select Kontakt 5 Virtual Input. That justs reassigns the channel as an External MIDI instrument and I'm back where I started.
    In Kontakt, the Output for Channel 1 (st. 1) only allows me to select my audio interface - M-Audio Fast Track Ultra. The only selections that will enable stereo playback in Logic appear in this screenshot:
    I tried using Reaktor in the same way and got the same result - playback but no bounce.
    In response to your multi-timbral setting idea, RT, the patch is a stereo sample and the multi-timbral aspect would only apply if I were loading a Software Instrument track (which apparently only allows selection of instruments within Logic).
    I tried working in the Environment window hoping I could cable Kontakt to Logic but that failed as well. I'm stumped.
    Thanks for the suggestions. Any other ideas are welcome!

  • Can't get more than one Ultrabeat sound setting in one project. If I have a drum track with an Ultrabeat "downtempo kit" and I make another drum track with "hip hop kit" in the same project, the settings of the other track transform to "hip hop" setting.

    So here's my situation.  I'm using Logic Pro 9.  I'm trying to use multiple drum tracks each with different Ultrabeat settings.  So let's say I have drum track with a loop from Ultrabeat that has the "downtempo kit 2" setting on it.  If I make another drum track and create a different loop in Ultrabeat with a different setting, let's say "hip hop kit" for example, and put that loop onto the new track, then the previous loop that I had in the first drum track will still be the same loop but the sound kit settings change to that of "hip hop kit."  So I can have different loops, but they all have to be "hip hop kit" settings or "downtempo kit 2" settings.  I am unable to multiple kit settings.  Is there a box I need to check to turn some automation off or something, because this is pretty inconvinient?  Why do I have to have only one Ultrabeat sound/kit setting per Logic project?

    Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

Maybe you are looking for

  • Send Mail to External Mail ID's for Multiple Users

    Hi All, I want to send mail from SAP to External mail ID's for multiple Users.The program is ok. But I want to send this to Multiple external Mail id's. Where should I assign this receivers list. Pls advise. What is the transaction to assign multiple

  • Creating something better than Photoshop CC ?

    The basic CC concept  just doesn't work for many people, including myself. Bottom line: there must be a  perpetual license option for a basic photo image editing program. For many photographers, Photoshop Elements just isn't robust enough. My guess i

  • What is the best way to protect my macbook on the internet

    what is the best way to protect my macbook on the internet, using mobile broadband?

  • Apple hardware test failed

    I have a 3 1/2 year old MacBook Pro 2.6 GHz. Suddenly I started getting kernel freezes....your computer need to shut down.... Sometimes I get the same message at upstart. Sometimes the screen starts blinking and them freezes with grey/green lines dow

  • Getting the Intended Target for a Request

    I now know how to set the target for a response: HttpServletResponse.setHeader("Window-target","myFrameName") My next question is how do I determine the intended target of the initial request, before I set it to something else with the above code? It