When I tried to import fro my camera, I cant get the last day to import. Could it have anything to do with Feb 29,2011 being Leap Year?

When I tried to import from my camera, the last day did not import, I keep retrying, but will not import. Could it have anything to do with the date Feb 29, 2012 as it was Leap Year?

OK Texas, so nothing strange with the calendar (unless you folk have seceded since the last time I checked the news )
Image Capture is an Apple App that comes with the OS. Allows you to do a bunch of things. Import pictures from your camera is one. Open the app with your camera connected. If you have Aperture set to open when the camera is connected just close Aperture and then open Image Capture.
You'll see the camera and it should show you the images on the camera card. See if the images from the 29th show up.
post the results.
regards

Similar Messages

WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??

I WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??

You'll have to put your iPhone in Recovery Mode.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again.

HT1688 i have an i phone 4s. i have tried everything i know to do but cant get the phone to ring out loud when i recieve a call or message. any ideas on how to fix this?

I have an i phone 4s I have tried everything i know to do, but cant get the phone to ring out loud when i recieve a call or message. Any ideas on how to fix this?

Flip the ring/silent switch on the left side of the phone from silent (red showing) to ring position.

When I click "Buy Now" in iPhoto's book I get the following message: Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"

When I click "Buy Now" in iPhoto's book I get the following message: "Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"
How do I proceed? How do I identify which is "default text?"

What version of iPhoto are you using?
Go thru each page, check the layout to see if there's a text box included on the page and make sure there is text in that text box. If not it may show the "holding" text like this:
If you don't want to change the page layout to one that only has photos and no text boxes just select that holding text and put a space in its place.
OT

I have been running Firefox on my PowerPC G5 for years and have just tried to install 4.0. When I attempt to start Firefox, a window opens telling me the application cannot be launched. I have installed it twice with the same result. What gives?

I have a PowerPC G5 quad core Mac with a pre-intel chip. I have been running Firefox successfully for over five years and have used every version in operation during that time. Tonight, I received notice that the latest version of 3.6 was ready to install and that I needed to restart. I did that and was taken to a page telling me that 4.0 was available for downloading and use. So I downloaded the new 4.0 and tried to install it in the typical Mac fashion. After clicking on the dmg, I dragged the icon into my applications folder and onto the dock. But when I click on the icon on the dock, I get the message: The application cannot be launched. 10661
When I try to launch by double clicking in the applications folder, I get the message: You cannot open the application Firefox because it is not supported on this system.
I had to go to your site using Safari of all things! I tried re-installing it with another download, and that one misbehaves in the same way. By the way, in case it matters, I still have 42 GB available on my hard drive and 5 GB of RAM.
There is one other funny thing. The Firefox icon from the disk image has a white circle with the slash through it on top of the fox and world symbol. That is what appears in my applications folder and in my dock. It appears to be saying NOT FIREFOX, as it would indicate in a NO U-TURN sign. What is this all about?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

TS2755 Why do some of the imessages go in green, and some go in blue, when sending to the same phone number? Does it have anything to do with the cellular carrier?

Can someone please tell me why when you are sending a message to the same phone number, and they also have a I-phone, that some of the messages go in blue and you can see that it has been delivered and read, and some messages go in green and you can't see if they got the messageor if they have read the message?

SMS messages are shown in green, iMessages in blue. If the recipient is an iPhone user but doesn't have a data (WiFi or cellular) connection and you have Settings>Messages>Send as SMS enabled, that person will get your messages as SMSs until they have a data connection again.
iMessages have delivered notification (and read notification if the recipient has that feature enabled). SMS does not.
Best of luck.

HT1695 i just got an ipad 2, 32gb, i have wireless internet thru my phone carrier for my computer, they say i can use up to 5 devices with it, but i cant get the ipad to connect to it, i have tried everything, i think, can u help me figure this out

i just recieved an ipad2, 32gb, i cant figure out how to get it to connect to my wireless internet.. it is thru my cell carrier, i am suppose to be able to use up to 5 devices with it at the same time.. can someone tell me what i am missing.

You can not install it.
Only apps from the official Apple App Store can be installed.

TS1315 when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an unrecognizable format. It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic.

when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an "unrecognizable format". It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic. I have had these cameras for a few years and have never had a problem downloading.

I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you

My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this code appear, and what did they do to solve it?

My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this error code appear for them before and how were they able to fix it?
Thank You

See SIMPLE easy solution for 1015 3094 3014 21 error

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please help. I have tried lots of things now and cannot solve it.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

Hello,
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

How do you isolate an album or artist in the new iTunes? (12.0) It is really frustrating when trying to listen to one album and I get the album in the list with all 1,025 other albums in my library.

How do you isolate an album or artist in the new iTunes? (12.0) It is really frustrating when trying to listen to one album and I get the album in the list with all 1,025 other albums in my library. Same with the artist.

Welcome to the  Discussion Forums
... I assumed that if I played the 1st track, it would continue to play the rest of the album (as iTunes does on my Macs and PCs),...
You assumed correctly, and it should continue to play the rest of the album in order. Does this happen to all your albums. Have you tried restarting the tv.

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

When I tried to import fro my camera, I cant get the last day to import. Could it have anything to do with Feb 29,2011 being Leap Year?

Similar Messages

Maybe you are looking for