When is the planned release for 10.1.2.0.2

Hi,
We are very much waiting for the 10.1.2.0.2-release. Does anyone know when this is expected?
Eirik

Clemens
We have an SR raised which is now with development, but so far we have not been able to pin down what is causing this.
Basically we see entries end up on the recovery queue with nothing written in any logs, even if we increase the level of logging to debug.
This does not happen under load, the exact opposite. If nothing is going on and then we get 5-10 processes start, we see about 1% end on the queue. I pushed 500,000 messages through it last weekend and nothing ended up on the queue, yet a run on Monday of just 100 caused 2 entries on the queue with no explaination.
I have tried everything I can think of, but so far have not been able to re-create the condition at will, it is completely non-deterministic. It also happens on all 5 of our rigs, so it is not machine specific.
I have tuned the BPEL engine and it easily copes with our throughput. We are running with a 10g dehydration store, either single instance or active-passive depending on environment, but I do not think this is going to be causing an issue.
We have about 20 async processes and sub-processes and the problem can occur at any point, although mostly on Invoke and Callback. Each process contains a mixture of async (to BPEL), sync (to External) and a reasonably number of database adapters in each process.
It is not the fact it is placing the entry on the queue that is my issue, it is the fact we have no idea WHY it has ended there as there are no log entries.
Any ideas what else I can try?
Pete

Similar Messages

  • When is the next release for Java WebStart?

    Anyone knows when is the next release scheduled to come out?

    I don't think the version of Web Start bundled with 1.4 is new. It is still 1.0.1.
    I wish Sun would tell us what features to expect from upcoming releases of Web Start.

  • HT1846 when will the update released for boot camp to install in 3TB drive to install windows 8

    I would like to install windows 8 on my 3TB drive since the boot camp is not supported yet for 3 TB only supports upto to 2.2 TB when will be the update released

    Apple is not here, just end-users like you. Anyone end-user who does has this knowlege would violating a non-disclosure agreent if he responded.
    You best action at this point is to use the one path we have for getting info to Apple people working on technologies:
    http://www.apple.com/feedback/macosx.html

  • When is the next update for iphone carrier setting?I cant change my carrier to 2g!!!There is only 3g or LTE available for me.

    when is the next update for iphone carrier setting?I cant change my carrier to 2g!!!There is only 3g or LTE available for me.

    Carrier Settings are dependent entirely on your carrier.  2G is old outdated and slow etc, most carriers are phasing out their 2G service. You would need to ask your carrier when they plan on releasing a new update.
    Why on earth do you want to set your iPhone to 2G?  It will automatically switch to 2G if 3G is not available, and 2G is found.

  • Getting the below error when running the Baseline.grf for the first time

    I am getting the below error when running the Baseline.grf for the first time.
    Appreciate your support in resolving it.
    Error below:
    INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
    INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
    INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
    INFO [main] - Loading default properties from: defaultProperties
    INFO [main] - Graph definition file: graph/Baseline.grf
    INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
    INFO [main] - Checking graph configuration...
    INFO [main] - Graph configuration is valid.
    INFO [main] - Graph initialization (Baseline)
    INFO [main] - [Clover] Initializing phase: 0
    INFO [main] - [Clover] phase: 0 initialized successfully.
    INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
    INFO [WatchDog] - Starting up all nodes in phase [0]
    INFO [WatchDog] - Successfully started all nodes in phase!
    INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
    INFO [RUN_GRAPH1_0] - Checking graph configuration...
    INFO [RUN_GRAPH1_0] - Graph configuration is valid.
    INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
    INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
    WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
    java.lang.NullPointerException
         at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
         at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
         at org.jetel.graph.Phase.free(Phase.java:487)
         at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
         at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
         at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
         at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
         at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
         at org.jetel.component.RunGraph.execute(RunGraph.java:302)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
    WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
    ERROR [WatchDog] - Graph execution finished with error
    ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
    ERROR [WatchDog] - Node RUN_GRAPH1 error details:
    org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
         at org.jetel.component.RunGraph.execute(RunGraph.java:324)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
    INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
    INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
    ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
    INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
    INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
    INFO [WatchDog] - 0 ERROR 2 20132
    INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
    WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
    ./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
    INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
    INFO [main] - Freeing graph resources.
    ERROR [main] - Execution of graph failed !

    It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
    #echo $CLOVER_LIB/*
    for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
         LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
    done;
    #for i in `ls $CLOVER_LIB/*.jar`; do
    #echo $i
    #done;
    You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
    HTH,
    Dan
    http://branchbird.com

  • Selecting the Planning Level for Statistical Forecast in S&OP on HANA

    Hello together,
    we currently face an issue regarding the statistical forecast in S&OP on HANA:
    The customer wants to implement an S&OP process containing the two steps statistical forecast (automatically calculated) and sales forecast (manually determined). The planning level of the statistical forecast should be higher than the planning level of the sales forecast, i.e. the statistical forecast is calculated on a higher planning level and then disaggregated to be an input for the manually determined sales forecast.
    Since it doesn't seem to be possible to disaggregate any key figure below its base planning level we need to have the lower sales planning level as base planning level in all key figures, including the input and output key figures of the statistical forecast.
    When running a statistical forecast with a defined forecasting profile, the planning level used for the forecast seems to be the base planning level of the input/output key figures defined in the forecasting profile.
    However, we need to define a higher planning level for the statistical forecast in order to have a better data base for recognizing trends and sesonality. In APO DP it is possible to define the planning level for the forecast when running/scheduling the forecasting job. Is this also possible in S&OP on HANA? Can we define the planning level for the forecast in the forecasting profile or when running the forecast from the Excel AddIn? I tried to use the field "Filter" in the forecasting profile as it listed all the planning levels (as well as a lot of other things, we don't know where they come from), but the forecast was still carried out on the base planning level.
    Do you have any other idea where to define the forecasting planning level that is different from the base planning level of the input/output key figures?
    Thank you in advance,
    Jonathan

    Hi Bert,
    thank you for your fast answer. I checked the forum again and found this post:
    Question about Statistical Forecast
    However, I don't really get how the disaggregation is meant to work; the suggestion seems to be to calculate a forecast on an aggregated level, i.e. with input and output key figure with an aggregated base planning level, and then disaggregate it "somehow".
    Do you have any idea how this disaggregation might work and what other steps I have to consider?
    It seems as if I'd have to define a whole bunch of new key figures and have more than one output key figure but no input key figure for the statistical forecast, which doesn't make sense in my eyes.
    Actually I was looking for a solution where I can define my forecasting profile with both input and output key figure on the lower planning level and then insert the level I want the forecast to be done at either in the profile as well, or even more flexible when running or scheduling a forecast. Defining more key figures any time I need another forecasting level does not appear very comfortable. Is it meant to be like that or is there another way to reach the goal mentioned above?
    Cheers,
    Jonathan
    Edit: The mentioned thread contains some valuable information on how to disaggregate key figures. However, the really tricky decision is how to define the disaggregation ratio.

  • When will lollipop be released for Moto X?

    When will Lollipop be released for 1st gen Moto X?   Certainly must be some new information since Nov 2014.
    I hope this isn't one of who is waiting on who. Verizon vs Motorola.

    Motorola started rolling it out on 2013 models just a few days ago...  The 2014 actually came out first on Verizon before their other 2014 X models go it from I remember.  So pretty much I think it's a toss up at this point on what's going on.

  • When will kitkat be released for lg g2

    when will kitkat be released for Verizon lg g2. seems all other carriers have it already.

    It is released now. Just found out you can use the Upgrade Assistant built into the phone. No OTA yet.
    See this link for info:
    LG G2 Kit Kat Update Available From Verizon Via Upgrade Assistant | Droid Life

  • How are the annoucements released for new phones?

    My current phone is a LG VU. I was just wondering how will the annoucements be released when new versions are released for more compatible phones?

    You need to use a certified browser -- Please see the docs referenced above for the list of supported browsers and client OS.
    If you still get the same error, please see these docs.
    Critical Patch Released For Release 12.1.1 and Higher Customers Using Projects Web ADI Functionality [ID 1315848.1]
    Accessing Application Get Error: Fnd_session_management.Updatessioncontext Sql Exception [ID 1316294.1]
    Thanks,
    Hussein

  • I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

    I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

    If you have no photos:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
    Regards
    TD

  • How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

    How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

    Hi,
    Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
    Regards,
    Pawan

  • Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

    Hi,
    I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
    the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
    updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
    any help in this regard is highly appreciated
    Thanks,
    Santosh Sutar  

    Hi Satosh Sutar,
    Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
    From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
    And here is an article about updating apps for Office and menifest schema files in the project for your reference:
    How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error when reading the DDIC-data for table

    Hi Tobias
    We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
    To test initial load, we stopped replication for an existing table and then started replication for the same table.
    Mass transfer id connects ECC system to BW on HANA system.
    Replication errored with the following message:
    Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
    Looking for your guidance.
    Kind Regards
    Kamaljit Vilkhoo

    Was able to solve using oss note 1972533.

  • Error when determining the CTIADM_PROF profile for agent xyz

    Hi,
    I have created the new cic frame work and assigned it to the position. when i run the TC - cic0, I am getting the following
    "Error when determining the CTIADM_PROF profile for agent xyz"
    Can you help me out ?
    Thanks in advance

    Hi Devi,
    Problem is your IC winclient profile definition don't have any profile definition for CTIAMD_PROF assigned to it.
    For this you can use standard profiles or may create your own CTI Component profile.
    Follow IMG path:
    Customer Relationship Managemet>Interaction Center WinClient>Component Configuration>Hidden Components>Configuration of CTI Component-->Define CTI Component Profile
    Use this profile defintion to assign it to CTIAMD_PROF in you IC winclient profile definition.
    Best Regards,
    Pratik Patel
    <b>Reward with POints!</b>

  • Error when determining the CTIADM_PROF profile for Agent 1010301

    Hi,
    here problem is while opening the cic win( Trn : CIC0 - Customer Interaction Center) it's throwing <b>error when determining the CTIADM_PROF profile for Agent 1010301</b>
    pls. any ideas would be greatfull.
    Thanks

    Hi,
    please check the following.
    1. Make sure in the CIC profile (transaction CICo), a profile category
    CTIADM_PROF is there and a valid profile is assigned.
    Or, if no telephony should be used, make sure telephony and its com-
    ponents are switched off on the CIC framework (transaction
    CRMC_CIC_FW_MAINTAIN)
    2. in the standard system, when you start your CIC, the framework is
    taken from the highest org-unit and the components are taken from the
    lowest level.
    If you use more then one level of org-unit, please make sure that they
    use the same framework to prevent the mentioned problems.
    hopefully this helps!
    Regards, Gerhard

Maybe you are looking for