When using an Apple TV, any new device that logs on immediately takes over the display.  Is there any way to prevent this and maintain the control from a designated device?

I would like to designate a single device to control the Apple TV, but anytime another device enters and logs on it takes over the display and whatever is on that screne appears.  Is there a way to set the Apple TV so this does not happen?

Glen beck is a conservative news commentator , he now has a tv Chanel broadcasted only by the Internet, is is GBTV I get it on ROKU. I cannot get that or FOX NEWS or CNET on my new apple TV. Love the new device with the exception of my missing networks. By the way, thanks for the remote advice it works great.

Similar Messages

  • Stereo audio when using video camera?  Any way to do this?

    Is there any way to record in stereo (2 mics) when recording video with the onboard camera? Can the 30-pin connector receive a stereo signal when videoing?  (iPad3, iOS 7)

    I figured it out myself so thought I'd share this for anyone else who wants to record video with the audio portion in stereo, you can do this using Sonoma Wireworks' GuitarJack2 in conjunction with a mixer.  Keep in mind this isn't a portable solution at all but the resulting audio is excellent, especially in headphones so this is great for doing a video of yourself singing and playing guitar (for example) and you want to capture a good stereo audio signal.  Basically, the way is works is you plug your two mics (we're talking recording style microphones with the XLR connectors) into your mixer of choice.  You then run a line out of the mixer into the 1/8" audio input jack of the GuitarJack 2 (it's a stereo line-in) and the 30-pin connector goes into your iPhone/iPad.  There are a couple of settings you have to make with the software for the GuitarJack but once you've done that, you can then make some videos with terrific stereo sound.  You monitor the audio via the headphone jack of your mixer.  If anyone knows an easier way to do the same thing, please let me know but this is the only way I've found. 

  • When I attempt to send a new AIM message it defaults to sending an iMessage. Is there a way around this?

    I use Mac Messages app for iMessage, SMS, AIM, & Google Chat.  When I attempt to send a new AIM message it defaults to sending an iMessage.  Is there a way around this?
    I have my preferences set to save messages history in my Mac Messages app and the issue seems to arise when I attempt to send a new AIM message to someone that I have recently had an iMessage conversation with.  I have tried right clicking the person's name in my buddy list and selecting "Start New Chat" and it appears as though I'm writing a new AIM message to them but when I send the message it defaults back to an iMessage.  AIM is used for daily communication by everyone in my company and used heavily throughout my industry.  Considering a majority of my contacts don't have iMessage synced to their Messages/AIM app on their desktop it is ineffective and disruptive to send an iMessage instead of an AIM.
    Any insight or help would be appreciated.  I'd love to find a solution without having to turn off the save messages history setting in my Mac Messages app.
    Thanks-
    Adam

    Hi,
    The Name at the "To" spot should become  a drop down  and this should show you the various ways you can connect to them.
    A "Chat" with someone can then switch between the various options if they have several ways.
    As @mac.com and other Apple issued ID can also be AIM valid Screen Names you sometimes have to take a little care.
    If you have made it to be an AIM chat though it should not switch back to iMessages even if that was the last method they used to contact you.
    I find in Mavericks (that I am currently booted into) I can double click the Buddy Line in the Buddy List (And I have my Buddy List separate) the Chat will take on the AIM item in the text field.
    This was an iMessages conversation before this.
    I presume this still works in Yosemite.
    9:52 pm      Saturday; April 4, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taking with the phone in portrait mode.

    When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taken with the phone in portrait mode.

    Shot videos ONLY in landscape. For photos choose what's you like. Maybe you have to rotate photos on PC. What's your operating system?

  • I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

    I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

    Are you leaving the box unchecked to Manually manage music & videos? You don't need to to add anything to the iPhone.
    Simply drag the playlist to the iPhone to manually add it.

  • When I run out of funds in my account (I always redeem I-Tune $15 or $25 prepaid cards) if additional music is purchased, they are automatically billed to my credit card.  Why? Is there a way to prevent this?

    When I run out of funds in my I-Tune account (I always redeem I-Tune $15 or $25 prepaid cards)  if additional music or apps are purchased, they are billed to my credit card.  Why?  Is there a way to prevent this?

    Roaminggnome:
    I have just found a way to do exactly what I wanted to do!
    I opened I-Tunes, then clicked on the "Account" link under the heading "Quick Links".
    After entering my Account ID and Password, I got the "Account Information" window.
    I then clicked on the Edit link at the end of the "Payment Information" line which listed my current credit card information.  This opened the "Edit Payment Information" window. On this screen, instead of selecting Visa, etc... I selected NONE and then clicked on DONE at the bottom of the screen.  Just like magic, my credit card information disappeared and was replaced by "No Creidt Card on File" which is exactly what I wanted.  FYI.  

  • Robohelp HTML command-line utility overwrites merged files in .hhp file with absolute paths. Any way to prevent this?

    I have a Robohelp 11 HTML project which uses merged CHM files. I have a help build script which compiles this project using the RH command-line utility. Whenever this runs, RH overwrites the names of the merged CHM files in the .hhp file to use absolute paths (even if the .hhp file is read-only!). I've searched Adobe forums and this appears to be a RH bug. In my case, it doesn't stop the project performing the merge, but it looks like it causes problems when searching the resultant parent CHM (topics matching the search simply don't show up in child projects), as the search cannot necessarily find the merged files referenced in the .hhp when someone performs the search on a different machine. I notice that if I compile via the RH UI, the .hhp entries are not overwritten. So, a workaround is to do the build manually. However, we'd like to automate our help build. Is there any way to prevent the command-line compiler overwriting the merge file entries in the .hhp?

    This was a problem with Rh9, see Item 13 at Using RoboHelp 9
    I haven't seen it reported since but maybe something at that link will help.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Is there a way to prevent apps DLed on my phone from being transferred to iTunes when I sync?

    So here's my question: When I buy an app on my iPhone and sync to my computer, why does it transfer it to locally to my iTunes still, shouldn't it just be backed up in the could?  And shouldn't this app get deleted locally from iTunes when I remove it from my phone?  I just went through and deleted about 10GB of apps that have accumulated over the years from my computer, which weren't on my phone anymore.  Seems like a big waste of space to even backup apps to the computer anymore, how can I prevent this?

    in itunes,  once your device is conected it will appear on the right hand side. click on it and then on the main window you can select at the top, apps, music movies, etc..
    that's where you can customize you sync for that device, by checking unchecking boxes.
    and this is only for that device. plug another and do the same. and another, and another, as many as you want.
    hope it helped

  • Is there any way to prevent this javascript icon/link on bookmarks?

    Is there any way to prevent webvpn portal bookmarks from including this java-icon-link and thus preventing a user from using it's GO TO ADDRESS?
    (WEBACL does not seem to prevent these Go To Address addresses...)

    You can use the following APCF to disable the floating toolbar.  The example below will apply to any URL but you can modify the wildcard to be a more specific value to suit your needs.
    1.0
    Disable WebVPN toolbar for all sites
    http://www.cisco.com/en/US/customer/docs/security/asa/asa80/configuration/guide/webvpn.html#wp1046654
    Todd

  • I don't want my recently closed tabs to be saved... Any way to prevent this?

    It has been a long time since I have used Firefox (got a Macbook, and for some reason just used Safari for a long time), so please forgive me if I am just missing something in the Firefox settings.
    Anywho, I have Firefox set up to not remember my history because I like the privacy it offers. I think it is odd that I have it set up to delete my history, yet when you go to "History", it keeps a list of all my closed tabs... Doesn't that kind of defeat the purpose of having the browser not save my history?
    Is there a way to prevent Firefox from keeping this list of my recently closed tabs?

    Note that Firefox keeps a list of one closed window even with browser.sessionstore.max_windows_undo set to 0, so you may have to open another window with one tab and close this window to purge websites from this list.
    See also the <b>browser.tabs.closeWindowWithLastTab</b> pref on the <b>about:config</b> page.

  • I have iphone my daughter has ipod touch when she downloads app they end up on my phone is there a way to prevent this

    I have an iphone 3gs with latest update my daughter has ipod touch the latest one available when you downloads apps they appear on my iphone is there a way to prevent this

    If you are using the same user account on your computer that may be the problem.  The iTunes settings will be different for each user account.

  • TS1424 I rented a movie and accidentally started it.  It says I have 23 hours to watch.  Is there any way to correct this and just keep it in my library and have the month to watch it.

    I rented a movie and downloaded it to my Ipad2.  I accidentally hit the start.  I soon found out that have 23 hours to watch it rather than store it for the month.  Is there a way to correct this?

    Welcome to the Apple Community.
    unfortunately not.

  • I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled.  What is causing this and is there a way to prevent this from occuring

    I have a MacBook Pro.  When surfing the web it will eventually slow to a crawl.  When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled.  What is causing this and is there a way that I can modify or prevent this from happening?  Is there a setting that will prevent this?

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I inadvertently his a key while view a note and it deletes the note.  This change is then instantly propogated to icloud and to all my devices.  Is there any way to prevent this?

    I inadvertently hit a key whild viewing a note portion of a contact and the note was deleted.  This change was immediately propagated to icloud and to all of my devices.  Is there any way to suppress changes until you are ready to sync them?

    No, it's done exactly what it is intended to do.
    Syncing of notes (contacts, calendars, etc) via iCloud is instantaneous across all connected devices.

  • Pages 5.1 deletes "objects" in table cells. Is there any way to prevent this?

    I have been using Pages 4.3 and updated to Maverick; downloaded Pages 5.1, and now when I want to open previous documents the pages app doesn't support certain functions.  For example I had a table of images and information related to them, and it is removing the images from the table when it opens the documents.  I still have 4.3, and as a work around I am able to open documents in it, but moving forward, I will want to use the new software.  Any thoughts or options here?

    Pages 5 has over 90+ features removed.
    If you wish to "move forward" that is what it is.
    Keep in mind that Apple trashed all the old file formats. Without notice. Making it difficult or impossible to reopen your previous work. They will do it again, as they have in the past.
    "Moving forward" is probably best with some other software.
    Peter

Maybe you are looking for

  • Creating a new report in 11.5.9

    I am trying to create a new report for Oracle Sales Online. I don't want to just do a simple JSP, I want to use some of the existing functionality that the existing pages are using. Take the Organization Summary page for example. Its the page called

  • Logic is correct or not

    data : begin of it_zmm_isslip occurs 0.         include structure zmm_isslip. data : flag(1). data : end of it_zmm_isslip. controls : tab201 type tableview using screen '0100'. data: ok_code type sy-ucomm,       save_ok like ok_code. selection-screen

  • 2.1.1.21 version doesn't work for Me

    Hello blackberry users... Let me tell you the reason why I'm here. Since I bought my blackberry, I had always updated bb appworld when an update was out... But since I downloaded the 2.1.1.21 version, I'm not able to use it. When I try to open this a

  • Export some xy graph values to spreadsheet

    Hello, I'm newish to labview and i'm trying to extract the values used to plot the XY Graph, but only for x=0,10...90,100 ... 360. instead of extracting 361 values i need only 37. I tried using another for statement but with no succes. Any help ? Sol

  • Setting the counter output mastertimebase divider?

    Hello I want to output single short pulses with varying pauses. My MuFu DAQ card has 20 MHz master clock rate and 24 bit counter (Good ol'6052E). When I try to output 1 µs with a pause duration of more than 839 ms, I get an error due to mismatch of c