When we get the actual data in BPC for planning, is the data consolidated

I had a question regarding Planning. When we get the actual data in BPC for planning, is the data consolidated? Do we need to run the consolidation business rules( IC Booking, Matching, IC Eliminations) on the data before we can use it for planning? Per my understanding we have to run Currency Conversion on this...correct?
Also, where do I get my actual data from? Does ECC/ Source system have data from all entities( CHQ, Region and Countries)?
Please help!
Thanks in advance

Hi Kimi,
In a hierarchical structure, the data is always loaded in to the base level, and the data is automatically rolled up to its parents.
The currency conversion will also take place at the base level, and as mentioned earlier, the converted data will also be rolled up as per the hierarchy.
The heading of this thread says planning. So, ideally, there wont be any legal (or statutory) consolidation. You might use the US elimination however, for eliminating the intercompany transactions, if any.
The planning can be done as zero based (wherein the user has to enter the planned data manually from scratch) or non-zero based (wherein the planned data of previous year is copied and the user can change the data as required).
The flow of events cannot be suggested by us. It has to be discussed with the business to understand how do they do the planning.
Hope this helps.

Similar Messages

  • Memory Leak when I get the SP return refcursor by oracle ODBC driver:

    Oracle server:ＨＰ－Ｕｎｉｘ
    Oracle Version: 9.2.0.6.0
    Application Server: windows2003
    Develop tool ： VC++;
    Question:
    when I get the return refcursor by OLEDB.Oracle, there is not any memory leak and work well. But when I change the driver to ODBC “Oralce in OraHome92"
    there will be an 56k memory leak.
    And in the other hand if I call an store precedure without return ref. Both driver /way can work well.
    Can you give me the advice? thanks a lot.
    Code such as:
    _ConnectionPtr m_AdoConnection;
    _CommandPtr pcmd = NULL;
    _RecordsetPtr sp_rs = NULL;
    _bstr_t bstrConstruct = _bstr_t("DSN=test;Uid=test;Pwd=test;PLSQLRSet=1");
    HRESULT hr = CoCreateInstance(__uuidof(Connection),NULL,CLSCTX_INPROC_SERVER,__uuidof(_ConnectionPtr),(LPVOID *)&m_AdoConnection);
    if (FAILED (hr) ) throw hr ;
    m_AdoConnection->PutCursorLocation(adUseClient) ;
    m_AdoConnection->IsolationLevel = adXactSerializable;
    m_AdoConnection->Mode = adModeShareExclusive;
    bstr_t bstrEmpty(L"") ;
    m_AdoConnection->Open (bstrConstruct, bstrEmpty, bstrEmpty, -1) ;
    SAFE_CALL(m_spObjectContext->CreateInstance(__uuidof(Command),__uuidof(_CommandPtr),(LPVOID *)&pcmd));
    if(pcmd == NULL)
    throw CAtlExceptionEx(E_POINTER,"pcmd is NULL");
    pcmd->CommandText = _bstr_t(L"wec_pkg_spl.wec_proc_spl_check");
    pcmd->CommandType = adCmdStoredProc;
    _bstr_t id = _bstr_t("65650000");     
    pcmd->Parameters->Append(pcmd->CreateParameter(_bstr_t(L"id"),DataTypeEnum(adVarChar),adParamInput,2000,_variant_t(id)));          
    pcmd->Parameters->Append(pcmd->CreateParameter(_bstr_t(L"errcode"),DataTypeEnum(adNumeric),adParamOutput,4));
    pcmd->Parameters->Append(pcmd->CreateParameter(_bstr_t(L"errdescription"),DataTypeEnum(adVarChar),adParamOutput,2000));
    pcmd->ActiveConnection = sp_con.m_AdoConnection;
    sp_rs = pcmd->Execute(NULL,NULL,adCmdStoredProc);
    pcmd->Release;          
    sp_rs->Close();     
    if (m_AdoConnection->State == adStateOpen)
    m_AdoConnection->Close();
    wec_pkg_spl.wec_proc_spl_check arguments:
    id          varchar2     in
    flowpaths     ref cursor     out
    errcode          number          out
    errdescription     varchar2     out
    Message was edited by:
    [email protected]

    I'm using the oracle ODBC driver 8.05.10 with MFC and client version 8.0.5. In my experience you can't prevent memory leaks with that or earlier versions of the ODBC driver. Client patchkits or service packs for NT or the Visual Studio doesn't solve the problem.
    The following code will result in a memory leak with the oracle driver. With every expiration of the timer the leak will grow.
    void CTestOdbcOracleDriverDlg::OnTimer(UINT nIDEvent)
    TCHAR errString[255];
    //open the database with class CDatabase
    //use of CRecordset
    TRY {
    //my table name is AL_ALARME_LOG
    pMyRecordset->Open(CRecordset::dynaset,"SELECT * FROM AL_ALARME_LOG",CRecordset::none);
    //do something with the data
    Sleep(0);
    pMyRecordset->Close();
    CATCH_ALL(error) {
    error->GetErrorMessage(errString,255);
    DELETE_EXCEPTION(error);
    END_CATCH_ALL
    CDialog::OnTimer(nIDEvent);
    The same code with the Microsoft ODBC driver
    doesn't cause memory leaks.
    Andreas ([email protected])

  • Results from a form submission does not keep the fields in order when I get the email

    I created a form and it works fine but when I get the email
    back the fields are out of the tab order or out of wack meaning
    they are not in order that I set the acceptabilities to.
    Is this something in the Action script I have to add and what
    would it look like or do I need to edit the CGI script?
    I can provide a link or script let me know.
    Thanks

    This is action script 3.0 Flash CS3
    Below is what I receive back after I test it but it is not in
    order. I guess I assumed that if the tab order is correct and the
    are layout in that order and the code in the form is in order it
    would come back the same way. Mostly I am trying to narrow down the
    problem and my guess is the cgi script or am I wrong? I have
    attached the code for the form.
    Thank You for you time
    Form email submission results:
    Below is what you submitted on Tuesday, February 19, 2008 at
    10:35:08
    list:
    phone:
    address:
    comments:
    city:
    state:
    zip:
    name:

  • I'm wanting to use the "Actions" in Photoshop Elements 11.  But when I get the Actions box up, it is only showing a small list of effects to use.  And no side bar to go any further.  When I click on the little arrow at top and then click on "load actions"

    I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further.  When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search".  The folder at the top does say "Actions".  How do I get more effects?  The tutorials that I've checked into all show a long list of effects in their box.  Can anyone help? 

    To use the existing actions, try the following:
    1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
    2. Then click on the name of the Action, in this example Faded Ink is the Action name.
    3. Then press the Play button to run the action.

  • How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

    How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

    You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
    If I upgrade to Yosemite will I be forced to go to the new Photos program
    No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
    Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

  • What do I do when I get the message my printer is not connected? HP Officejet Pro 8500A e-All-in-One

    What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One.  I have a macintosh computer using snow leopard.  I have used the printer for 6 months.  Nothing has changed.  I shut off the printer and turned it on.  The internet is working altough I will turn it off and on.  What do I do next?  Thank you.

    The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it.  If you don't have these you will find this on the HP web site.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I forgot the answers to the security questions. When I get the screen with security questions to be answered, the email adress where the reset procedure is sent to is wrong. How do I change it?

    I forgot the answers to the security questions. When I get the screen to answer them, the email address listed to send the email procedure is wrong. How do i change this email address?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
    Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                             Apple ID- All about Apple ID security questions.

  • What settings do I need to have on my macbook pro to access student.ashford.edu when I get the following error message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your Sy

    what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.

    I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari.  Obviously without a student password I cannot go any further.  If you can do the same, then clearly the problem is at the other end.  If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
    Ciao.

  • How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

    How can I download itunes when I get the following errors  ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
    This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
    Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
    Any help greatly appreciated.
    billymac

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (If this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    Hi Lawrence,
    Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
    Regards,
    Rave

  • HT5098 How can I read on my Apple Arabic files of Times New Roman or Arial in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the PC Windows files to  my Apple?

    How can I read on my Apple Arabic files of Times New Roman or Arial fonts made in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the Arabic  PC Windows files to  my Apple?
    The same with email messages ,
    And when I get Power Point files made in PC Windows, they are like PDF, not Power Point!
    Anybody with a good suggestion?

    Yewtree wrote:
    when I get the files the Arabic letters are separate and not joined
    Do not use MS Word for Mac, it does not support Arabic.  Instead use Mellel, TextEdit, Nisus Writer or OpenOffice.  Try the font Geeza Pro if others do not work.
    What are you using to read email?
    What are you using to read powerpoint?

  • How do I get iTunes back when I get the error message ; the application "I Tunes" unexpectedly quit while trying to restore it's windows. Do you want to restore it's windows?

    how do I get ITunes back when I get the error message :
    The application "ITunes" unexpectedly quit while trying to restore it's windows.  Do you want to restore it's windows?
    I already tried reloading ITunes and it still doesn't startup.

    You didn't mention but are you still running a version of iPhoto older than iPhoto 11?
    If yes, then go to the App Store and purchase the iP 11 app and install it. Back up your photo library first.
    Once iP 11 is installed and has imported all your photos do a restart of the Mac.
    This should resolve most issues with iTunes 10.6 and you should be able to run iTunes and sync up your iOS devices.

  • I like to play 5 dragons on my iPad frequently when I get the 3 coins to begin the bonus the game freezes after the coins stop spinning...how ca I fix this?

    I enjoy playing 5 dragons on my ipad2 but the game freezes frequently when I get the coins to begin the bonus...the coins will spin and then it freezes.  Any suggestions on a fix for the problem?

    Contact the developer of the app "Aristocrat Technologies" http://www.aristocrat.com.au/contact/contact/Pages/OfficeLocations.aspx

  • What does it mean when I get the error of iTunes Library .itl file is locked

    What does it mean when I get the error iTunes Library .itl file is locked

    It means that your iPod Hardisk has crashed and cant be started, you need to have the Hardisk replaced at Apple Store or any 3rd Party iPod service, if it is out of warranty.

  • Help: will iMovie delete the videos from iPhoto when i get the thumbnails?

    i have lots of important videos on iphoto and i am afraid imovie might wipe out all of the videos when it gets the thumbnails. has this ever happened to anyone before?

    iMovie will not delete anything in iPhoto.

Maybe you are looking for