Where do they put ONT??? in apartment

I am moving to a new apartment complex and I have a install day for 8/25  for TV and internet and was just trying to figure out where they are going to install the battery back up inside the apartment.  I saw a video where a couple had the huge box installed right next to their entertainment center.  I am on the end of a building on the bottom floor.  Any guess please let me know..
Thanks 
Solved!
Go to Solution.

That's what you need to ask the apartment complex.   If by "wired" they mean that the fiber terminates in a common area in the building, then all that equipment goes in the common area.   If by "wired" they mean there is coax into every room -- then a seperate ONT and battery unit may be installed.
Installing it on the wall in the middle of a living room seems a little strange to me.  Since the battery has to connect to the ONT (which is an externally mounted  device -- at least in all the installations I've seen) it has to be physically close to where the ONT is mounted outside the unit.  I would find it very unlikely they would mount all that hardware on the wall of an interior room.
In my case (albeit, I live in a single family house), the battery backup is on the wall in my garage -- and the installer worked with me to place it exactly where I wanted it -- just as long as it was within a reasonable distance of the ONT mounted on the outside wall at the Dmark.

Similar Messages

  • When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme.  How do I change where appointments are put ?

    When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme.  How do I change where appointments are put ?
    Or how can I choose where the appointment is put ?
    I use the mobileme sync services so the ical calendars that are synced are those in the "[email protected]" group.
    Please help !
    Nick

    Actually you can't drag the appointment to ano calendar - its says "You can’t make changes to this invitation., Only the organiser can change this event"
    Also if you double click on the received appointment and open the window the only calendars shown that you can select are the 'on my mac" ones, and not the sync'd ones.
    Any ideas welcome !!
    Nick

  • I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

    I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

    Hi, Abril_Perez17.
    This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
    iPhone User Guide
    Regards,
    Jason H. 

  • Where is the 512x512 image used?  Do they put shine on it?

    We're supposed to upload a 512x512 image...
    Do they put shine on the image?
    What if you've pre-rendered your own image?
    Anyone know?
    Many thanks
    Cheers,
    Blaze.

    It's incredibly bad design, because a parameter in your binary (UIPrerenderedIcon) is influencing the meaning of the 512x512 image, which isn't part of the binary at all. And there is no way for you to say "give shine to the 57x57 icon but not the 512x512 one".
    *Desktop iTunes*
    The selected icons that appear above a list of search results are 512x512, shined and scaled down to about 61x61. The same icons are used when you browse a category.
    When you merely look at the App Store in general, the "What's Hot" and "What's New" sections have smaller icons - small enough to be the 57x57 ones, but since I'm not included in the list I can't tell you whether these are taken from the 57x57s that were supplied or whether they are scaled down from the 512x512s.
    In the detail page for an application, the 512x512 is scaled down to about 100x100 and has shine and reflection added.
    *iPhone iTunes*
    The 57x57 icons are used everywhere, with shine in the lists and with shine and reflection in the individual product listings.

  • I uploaded a lot of important pictures to iPhoto, after downloading them I deleted them off my memory card. Now, iPhoto will not let me look at the pictures and the album in which I put them is empty. Where did they go? What should I do? Help please!

    I uploaded a lot of important pictures to iPhoto, and then deleted them off my memory card. I tried looking at the pictures and they are no wheere to be found, the album in which they were is empty, and I looked everywhere for them. Where did they go? What should I do?

    Check to make sure the iPhoto Advanced preferences are set to copy photos into the library when importing, i.e. a "managed" library:
    If it is and you don't see any thumbnail in the Event they should be in apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with
    Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If you are unable to get iPhoto to recover the photos MediaRECOVER can be used on the memory card to recover the photos as long a they haven't been overwritten.  It will run in demo mode so you can see if it will recover the photo before you have to purchase it.
    OT

  • In mail, how do you increase font sizes in a reply.  Cannot find things like "underline", "italic" etc either.  Where are they?  Entourage was easier!!

    In mail, how do you increase font sizes in a reply.  Cannot find things like "underline", "italic" etc either.  Where are they?  Entourage was easier!!

    Preferences/Compsing/set to Rich Text (only then you can use bold etc).
    Then Rightclick the toolbar in Mail, and clcik Customize the toolbar.
    Put the icons (with or without text) that you want on your toolbar.

  • Where do I put a workflow so that all users on the Mac can access?

    Where do I put a workflow so that all users on the Mac can access it from Automator?
    Also. why does the search pattern "users" AND "workflows" return results whitch math "and" (lowercase)? I thought "AND" (in caps) is for boolean searches.

    Hi, Mike.
    1. You wrote: "Where do I put a workflow so that all users on the Mac can access it from Automator?"Either:
    • Macintosh HD > Users > Shared
    • Macintosh HD > Applications (if you're the Admin user).
    All users (unless restricted by Parental Controls) have access to those folders.
    2. You wrote: "Also. why does the search pattern "users" AND "workflows" return results whitch math "and" (lowercase)? I thought "AND" (in caps) is for boolean searches."It's unclear as to what search facility you are referring, and a bit hard to follow given the spelling errors in your question.
    Do you mean Discussions search? If so, have you reviewed the Search Tips? They're also available from the search page, where one can click "Tips" under the Search Terms field.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Where do I put my SD card in MacBook Pro

    Hi, 
    This may be a really stupid quesiton but I am stuck! 
    Where do I put my Scandisk memory card in the MacBook Pro? 
    I don't seem to have a slot anywhere. I am probably being very stupid!!!
    Please help.  Thanks

    You might have one of the 'micro' cards that needs a standard SD adapter - I have a 4GB of one of those in my phone, but it came with an adapter. My camera SD cards are standard size and they fit right into the card reader and show up on my desktop.
    Look for an adapter on Amazon.
    Good luck,
    Clinton

  • Where should a put FCP?

    I have been reading FCP for dummies, watching tutorials and reading the directions before installing the program. Now that I am about to install I remembered reading or hearing to install it in a certain place.
    Should I install the application on my main dirve where the OS and Applications folder is or on a seperate brand new internal drive where I intend to put my video files as I load them from DV tape?
    I was thinking it best to do the later but I want some input. If I should put FCP Studio on the newer seperate drive where do I put it? Do I make a new "applications folder" on this drive or just dump it on there anywhere?
    Thanks for the help.

    Captain,
    Yes, I was taught the same thing about project files. Then I worked for/with some of the folks associated with this group...
    http://www.creativeanimal.nl/files/eng/about.pdf
    http://www.creativeanimal.nl/files/eng/technical.pdf
    They all know what they are doing in a big way, and they were organizing the disks they were traveling from system to system, location to location, in the way I described above. I've working this way for several months without issue. That doesn't mean I won't in the future, though!
    OK, captured material.
    My client showed up with a UVW-1400 deck, when I was told it would be a DVW-A500. I own a AJA IO with 422 control. No such thing on a 1400. There are conversion options that might have worked, but I was on the side of a mountain in the Adirondacks.
    No deck control equals no time code equals you lose your media, you start over.
    Happily, I do travel extra firewire drives with me. I backed up my capture scratch every evening, in addition to the project, etc. I incremented the project name each day so I could avoid duplication - in my capture scratch folder I had incrimented folders repressenting my captures from day 1, day 2, etc.
    I'm going to look into alternative ways of controling 25-pin RS-223C, from my 9-pin controller on IO. I'm not knowledgeable about this.
    Love your story about the Mother's Day Project!
    The project I refered to was a documentary about my son's kindergarten, that some how went from, vhs, imovie, and an imac to eight days of shooting with an xl-1, buying a media drive and learning FCP 1.2.
    It was a difficult day when I learned about the not so nice relationship between Canon DV and FCP.
    It was a difficult day when the project would not open.
    It was a difficult day when the system drive on the imac started to make the funny little sounds just before it ground to a halt.
    No wonder I stepped away until version 4.5!
    Tom

  • Where do I put all my service classes?

    I am new weblogic server environment. I want to know where do I put all my service classes? I am deploying all my servlet in WEB-INF/classes directory (under the context root) but donot know where to put the service classes. (The service classes have the jdbc and sql code in them. They are like simple java beans. I don't have any sql in the servlet classes).

    <p>Hello,</p>
    <p>If the only other classes that use your service classes are in your webapp then putting them under WEB-INF/classes is perfectly acceptable, you might want to wrap them up in their own jar file and stick them under WEB-INF/lib, it is up to you.</p>
    <p>
    Hussein Badakhchani</br>
    </p>

  • Where do I put my Action Script?

    So, I created a small Flash site with no loading of external
    swfs. I am strictly using the timeline using labels. I have a layer
    for my main buttons (home, portfolio and timeline). I have selected
    AS3 for the file and I have those buttons working fine.
    I have a button for my portfolio where thumbnails will pop up
    after being pressed. I want to link those thumbnails to the URL's
    of the actual websites. Where do I put the action script?
    I also want to have my email at the bottom of the screen so
    you can click on it to email me. I am used to using AS2 whwere you
    simply put the code on the button.
    Thanks,
    Gabe

    Hey, so thank you for the fast reponse. I totally agree with
    you on learning AS3, I don't want to go back to AS2.
    I already have the code you supplied so I understand what it
    is doing but my question is where do I put it in this case? I
    always create an action layer as you mention. In my action layer, I
    have frame 1 with my preloader code and then frame 2 with my code
    for my main buttons. They call to the labels. So, when I press
    portfolio for example, it goes to that label.......a shape tween
    starts and my portfolio thumbs appear. I then want those thumbs to
    link to the URL of those sites.
    So, where do I stick your code?
    Thanks again for all your help. I am NEW to AS3 and this is
    great learning.
    Thanks,
    Gabe

  • Where do I put passcode in 3g to activate bluetooh in car

    where do I put passcode in iphone to activate handsfree

    There is no sure way to prevent people from right clicking on your webpage or taking images.  This will tell you how:
    http://www.dynamicdrive.com/dynamicindex9/noright.htm
    Now if I have javascript disabled visiting your site, I can easily get around this because the code will not execute.  Also I can simply view the source of your website and get the images.  My suggestion to you is to rethink this because all you will end up doing is annoying visitors and make them want to get your images even more.  The more you block people from something the more they want it.  It's like telling a kid they can't have candy or something then they want it more.

  • I authorized and dled ITUNES to the new pc.  Well i would like to know where is all my songs i purchased? I want to hear them on this pc, i bought them so where are they and how do i get them on here so i can buy new songs and make new playlists?

    I authorized and dled ITUNES to the new pc.  Well i would like to know where is all my songs i purchased? I want to hear them on this pc, i bought them so where are they and how do i get them on here so i can buy new songs and make new playlists?

    They will only be where you put them.  They do not magically appear in new places.
    Have you copied them from your old computer to your new one?

  • HT1766 lost my iphone and can't find photos and videos from camera roll on my computer. where are they?

    lost my iphone and can't find photos and videos from camera roll on my computer. where are they?
    thanks

    Where did you put them?
    These are not part of the sync process at all, as the manual tells you.  You should be importing them to your comptuer regularly as you would with any digital camera.

  • HELP! Where should I put my codecs and plug-ins!?

    I do a bit of amateur editing, and I have a bunch of codecs and plug-ins. And a few months ago, I realized I MIGHT have been putting them in the wrong folder!
    Macintosh HD / Library / Quicktime
    So... I "copied all" and I pasted into the OTHER folder that seemed to have some codecs and plug-ins:
    Macintosh HD / System / Library / Quicktime
    Then, I "copied all" from THAT folder into the other folder, not overwriting duplicates.
    I DO remember that there were some in BOTH folders before I started adding...
    HELP! Where should they all go?
    tia,
    e

    Um, mpeg2, Divx, etc... flip and perian are fine, but don't come anywhere NEAR allowing you to play the totality of formats out there.
    However, I guess my question should have been, which ones are "Apples" and which ones aren't... I'd love to NOT have duplicates in both folders.
    Is there anywhere that lists the "default" Apple Quicktime Pro codecs and plug-ins that should be in that "apple only" folder?
    e

Maybe you are looking for