Where is Oracle Discoverer download?

Dear OTN,
Under Middleware downloads,you have a link called Oracle Business Intelligence and another called Oracle Business Intelligence Discoverer. Both take you to the same place - download links for 10g AS rel 1, rel 2, or rel 3. I downloaded rel 3 - nothing in its installation about Discoverer. I've been working with Oracle products for 19 years, expect I'll find it somewhere after numerous downloads, blind alleys, etc. How is a relatively inexperienced user of OTN going to find it? And I would love a hint so I don't have to spend a lot of time looking.
Warren Capps

Thank you very much for the quick reply. Much appreciated.
However, you must understand that it is not obvious to casual observer when they follow your download links that 10gAS rel 2 is what they are looking for when they want Oracle Discoverer and are faced with 3 10g AS choices.
Warren

Similar Messages

Oracle Discoverer on windows server 2008

I'm looking for oracle Discoverer download on windows server 2008(32 bit). I tried looking on ORACLE.COM but I'm not able to find one.
Can someone point me...

Hi
Here is the link: http://www.oracle.com/technology/software/htdocs/devlic.html?url=/technology/software/products/ias/htdocs/101202.html
However, you may be disappointed because according to this matrix: http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html it does not look like Server 2008 is a supported platform. I would ask Oracle Support to be sure or perhaps someone from Oracle reading this will advise.
When you get there you need to read the license agreement and then check and click the I Accept button to indicate that you understand and are willing to abide by the agreement.
Assuming you get the all clear, when you get to the main downloads page if you want the full application server you want the first row, if you want just Discoverer Plus / Viewer you want the row entitled Business Intelligence. You then look across the row for your operating system and then download all of the files that begin with CD. In your case because you are looking for the Microsoft Server version you need the software from the first column headed Microsoft Windows. Incidentally, if you need Discoverer Administrator and / or Desktop then it is also in the Microsoft Windows column and it is called Tools CD.
After you have installed Plus / Viewer (they both install at the same time) you version will be 10.1.2.0.2. This is the base version. You then need to log into MetaLink and download the 10.1.2.3 patch followed by the latest cumulative patch. This page on my blog will help with patch numbers: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html
Best wishes
Michael

Where can I find Oracle Discoverer Plus Download?

<email address removed by moderator so that you won't get spammed for all Eternity>
can someone guide me please?
thanks
Fernand

Hello
You need to install the 11.1.1.2 base software and then apply patch 11.1.1.6.
The base software is available from Oracle e delivery by starting here: https://edelivery.oracle.com
You need to log in with your OTN login and password and accept the license terms.
Once logged in, on the search form enter Oracle Fusion Middleware in the Select a Product Pack box then select your platform below.
With both filled in click the Go button
On the next page scroll down till you find the entry called Oracle Fusion Middleware 11g Media Pack for 11.1.1.6.0 - click the link
On the next page scroll down till you find the downloads for Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) - there will probably be several files to download
The patch is also available from e delivery on the same page as the 11.1.1.2 and is usually located one entry down below the other others. Unlike 11.1.1.2 which comes in multiple files the patch for 11.1.1.6 is nearly always a single large file between 1.5 and 2.0 GB in size
Note: when you install 11.1.1.2 you do a software only install. When you apply the patch you just install it using setup. When both are done you need to run the config.bat (or config.sh) file from within the Middleware bin folder.
Note 2: you must also have downloaded and installed weblogic 10.3.6 and created a repository for Discoverer using RCU 11.1.1.6
Your full list of software therefore is:
1. Java JDK
2. Equivalent JAVA client
3. RCU 11.1.1.6
4. Install Weblogic
5. Install Discoverer 11.1.1.2 software only
6. Install Discoverer 11.1.1.6 patch
7. Configure Discoverer using config.bat or config.sh
Hope this helps
Michael
PS. I will be covering installing the software in my upcoming Oracle Discoverer 11g Handbook which is scheduled for release early 2013

Where can I find oracle 9i download for RHEL 5.6?

Hello all,
do you know where can I find oracle 9i download for RHEL 5.6? I can't find it anywhere.
Thanks in advance.

024c8465-a0ba-4c31-8631-545e52a60961 wrote:
Hello all,
do you know where can I find oracle 9i download for RHEL 5.6? I can't find it anywhere.
Thanks in advance.
My Oracle Support ... and only if you have a paid-up support contract. Actually, I'm not sure 9i would be available even then. 10g is only available to those with a paid-up sustaining support contract. 9i is so old (hasn't been supported in this millennium) I wouldn't be surprised it is not available at any price. Further, I doubt it was ever certified for RHEL 5. Hard to tell since the documentation isn't even available .....
Just out of curiosity, why would you be needing such an antique?
On another note, please edit your profile to give yourself a recognizable name.

Where and what to download if I like to use Oracle Form 11g

Hello all:
where and what to download if I like to use Oracle Form 11g
Thx in advance.

hi
check out the following link.
Oracle Forms 11g available now!!
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html
Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32
hope this helps u.
sarah

From where can i find/download it's tables and data? ("Oracle iDS Froms:...

i have Student Guide named => "Oracle iDS Froms: Build Internet Application I" from
Oracle Corporation, part number D32772, May 2001. it uses "The Summit Sporting Goods Schema"
as an example throughout the book.
from where can i find/download it's tables and data?
will be thankful for guidence.
Arif.

from where can i find/download it's tables and data? ("Oracle iDS Froms:... Jan 22, 2004 6:34 PM
Reply
i have Student Guide named => "Oracle iDS Froms: Build Internet Application I" from
Oracle Corporation, part number D32772, May 2001. it uses "The Summit Sporting Goods Schema"
as an example throughout the book.
from where can i find/download it's tables and data?
will be thankful for guidence.
Arif.

Where can i find the Oracle by Example for Oracle Discoverer 9i2

Hi,
I am not able to get the Oracle by Example for Oracle Discoverer (9iDS)version 2.
Also, can someone give me the tutorials and any examples how to start learning this tool in a short time.
Can mail me to [email protected]
Sri

There is no OBE on Discoverer Administrator, which is under iDS. However you can see the 9.0.4 OBEs on Discoverer Plus and Viewer from this link http://www.oracle.com/technology/obe/obe_as_10g/bi/index.html.
Thanks,

Oracle Discoverer Administrator 11g

Hi All,
I want connect Oracle Discoverer Administartor 11g, so please hel[ me where can I download Oracle Discoverer Administrator 11g for Windows version.
i am able to find oracle doscoverer administrato 10 but not able find 11g software.
Please suggest.
Regards,
Prasad

Hi,
Did you check this http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Look for Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0
http://download.oracle.com/otn/nt/middleware/11g/ofm_disco_desktop_win_11.1.1.3.0_disk1_1of1.zip
Thanks,
Sutirtha

Oracle Discoverer Ver. 4.1.44

Hi,
Can someone please direct me to the specific install kit I need in to install Oracle Discoverer 4.1.44?
Thanks,
Nir

Discoverer is a part of Oracle Business Intelligence.
Discoverer 10g has been available for two versions now:
OracleAS Discoverer 10g (v9.0.4)
and
OracleAS Discoverer 10g (10.1.2). This is also known as Oracle Discoverer 10g R2 (10.1.2).
When installing Discoverer as part of the full application server install, the product is called Oracle Application Server Discoverer, whereas when you install it in a standalone mode with Oracle Business Intelligence, it is called Oracle Business Intelligence Discoverer. Irrespective of this, the product name itself remains unchanged as Oracle Discoverer.
Oracle Discoverer is certified against Oracle database 9i as well as 10g.
You need to download Discoverer to use it against either of these two database versions. Which you can if you go to Oracle.com/technology and follow the product download links.
It doesn't matter what database you use, Oracle products can be used against the latest version of the database, and for the time being against the 9i version also (with a few exceptions).
thanks
Abhinav Agarwal

Oracle Discoverer Desktop Report output showing unicode characters

Hi,
Oracle Discoverer Desktop 4i version Report output showing the below unicode characters.
kara¿ah L¿MAK HOLD¿NG A.¿
We ran the same query in sql at that time the data showing correctly.
Please let me know, is there any language settings/ NLS settings are need to set
Thanks in Advance.

Hi
Let me give you some background. In the Windows registy, every Oracle Home has a setting called NLS_LANG. This is the variable that controls, among other things, the numeric characters and the language used. The variable is made up of 3 parts. These are:
language_territory.characterset
Notice how there is an underscore character between the first two variables and a period between the last two. This is very important and must not be changed.
So, for example, most American settings look like this: AMERICAN_AMERICA.WE8MSWIN1252
The second variable, the territory, controls the default date, monetary, and numeric formats and must correspond to the name of a country. So if I wanted to use the Greek settings for numeric formatting, editing the NLS_LANG for Discoverer Desktop to this setting will do the trick:
AMERICAN_GREECE.WE8MSWIN1252
Can you please check your settings? Here's a workflow:
a) Open up your registry by running Regedit
b) Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
c) Look for the Oracle Home corresponding to where Discoverer Desktop is installed. It's probably called KEY_BIToolsHome_1
d) Clicking on the Oracle Home will display all of the variables
e) Take a look at the variable called NLS_LANG - if it is correct Exit the registry
f) If its not correct please right-click on it and from the pop-up select Modify
f) Change the variable to the right setting
g) Click the OK button to save your change
h) Exit the registry
Best wishes
Michael

Oracle Discoverer sub query in join

I wonder if anyone can help me?
I've got two tables (table a and b) that have a number of joins.
I need to add another join between table a and b where a date field (from table a) equals the maximum value for this date field (where the above joins hold).
How do I add this as a join in Oracle Discoverer Administrator?
Basically, how do you add a subquery in a join?
Thanks.
Jon

I wonder if anyone can help me?
I've got two tables (table a and b) that have a number of joins.
I need to add another join between table a and b where a date field (from table a) equals the maximum value for this date field (where the above joins hold).
How do I add this as a join in Oracle Discoverer Administrator?
Basically, how do you add a subquery in a join?
Thanks.
Jon

Oracle Discoverer Administrator 'OUT OF MEMORY'

Hi ,
I'm trying to include a case statement in the custom folder based on a query.when I include the case statement in the SQL query and click Validate SQL button i get error 'out of memory'.
can anyone plz help me with this.
thanks

Hi
The Out of Memory is not 100% related to the amount of memory you have on your machine. There is an internal cache that it is working with and this is controlled from within your system registry. These settings can be found in [HKEY_CURRENT_USER]\Software\Oracle\Discoverer 10\Application and they are called MaxVirtualDiskMem and MaxVirtualHeapMem and these are typically set to the amount of memory on your PC or even higher where 512000000 equates to 500 MB. I have rarely seen making a change to these have any impact but you can always try.
As a test, try using the Admin command line interface to do what you want. I have seen exports, as mentioned by Russ, fail using the application but work just fine when called from the command line.
You seem to be saying when you run the query yet in your question you say running in Discoverer Administrator. You cannot run a query in Administrator so are you saying that you get this issue when running the query in Desktop or in Plus? For Desktop you can try altering the MaxVirtualDiskMem and MaxVirtualHeapMem, whereas for Plus these will have to be changed in the pref.txt for the application server.
You can also try increang
Best wishes
Michael

Oracle Discoverer 10g desktop edition Release 2 (10.1.2.0.0)

hi,
Does anyone know where i can find out the documentation or tutorial about oracle discoverer 10g desktop edition?
any hits are welcome
thanks and regards
ling

And some more useful links:
BI on Oracle: http://www.oracle.com/bi/
BI on OTN : http://www.oracle.com/technology/products/bi/
Discoverer : http://www.oracle.com/technology/products/discoverer/
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples : http://www.oracle.com/technology/products/bi/samples/
BI Software : http://www.oracle.com/technology/software/products/ias/devuse.html
Thanks
Abhinav
Oracle Business Intelligence Product Management
Blog : http://oraclebi.blogspot.com/

Oracle Discoverer

I am using Oracle Discoverer Desktop. In my query I have column name emp_date and data type is date. The user can enter date at run time as parameter. There are two parameters one for start_date and other one is End_date and I want to set SYSDATE as default parameter in End_date . So user can enter date or it take SYSDATE as End_date, and Emp_date between Start_date and End_date.
If anybody can help me with this problem (set SYSDATE as default parameter) then will be great
Thanks In Advance.
SD

You could code that directly in the condition where, if nothing entered then use the SYSDATE.
Something along the lines of:
WHERE the_date BETWEEN :start_date AND (CASE WHEN :end_date IS NULL then SYSDATE else :end_date) END
Russ

Oracle Discoverer Desktop truncate at least 10.000 rows

Hi All,
I want to export to excel file from Oracle Discoverer Desktop. If the file contains more than 10.000 rows, It truncates the output and only shows the first 10.000 rows.
How can I resolve this problem?. I changed that Limit in Oracle Discoverer Viewer, but I don't know where I can do this in Desktop.
Best Regards,
Mariano.-

In Desktop, go to the Tools menu, and select Options...
The second tab is for the Query Governor, and you can uncheck (or change) the "Limit Retrieved Data To:" item. This works in Desktop 10.1.2.48.18.

Where is Oracle Discoverer download?

Similar Messages

Maybe you are looking for