Where is System.out in Tomcat 4.1?

Hello,
After getting the connection pool to work with MySQL, I am now trying to set one up for our Sybase system. I keep getting an error though that says: java.sql.SQLException: JZ00L: Login Failed: Examine the SQL Warnings chained to this exception for the reason(s).
Where are these "Warnings"? Shouldn't they go to the dos window where Tomcat is being run from (i.e. standard System.out)?
I have checked the log files which Tomcat generates and there is no warnings there. Can someone please tell me where to look?
Thank You,
Chris

Have you tried catching the SQL Exception and dumping the stack trace to System.out? You can then also use getNextException() on the SQL exception and dump that to System.out to get the chained Exception. These should then show up in the Tomcat window.
I would also try connecting to the sybase system using the ip address, port and login details that you were supplied by the sysadmin using Sybase client utils to check they are correct.

Similar Messages

  • Where does System.out.println go?

    Hi Everyone: I know I've seen this topic before, but I'm still having some trouble. I would like to debug my EJBs, and so I've added some System.out.println statements to them. Where does that go? I've looked at the defaultTrace.trc files in the
    C:\usr\sap\P48\JC00\j2ee\cluster\server0\log
    folder, and haven't found any of the text that I think I am writing. I appreciate any guidance! Ian.

    Hi lan,
    I was facing the same question earlier, and now I think I have figured out one possible answer. Actually, where the System.out.println goes is up to the Server Admin to config. There is a default SYSTEM.OUT log controller ( under location controller side) pre-defined to cater for all System.out.println(). All the System.out.println() output is considered as INFO type log message. However, this default SYSTEM.OUT controller is not assigned with any real log destination, thus, we cannot find the output anywhere.
    If you goes to the log configurator (using Visual Admin), you can locate this SYSTEM.OUT controller , and add in a default (Anonymous) destionation for it . (you need to toggle on the advance edit mode from the top menu , then you can add modify the destination settings of a Controller).
    For Anonymous destionation, the println() output will sure go to the defaultTrace.trc (better view it using Log Viewer, instead of viewing it from the log file ).
    Or , you can define a separate file (e.g. c:\temp\myStd.log ) as the log destination ..
    Last but not the least, you need to set the ForceSingleTraceFile setting from 'YES' to 'NO' , then you can see your "myStd.log".
    To change the ForceSingleTraceFile , go to Visual Admin, J2EE server --> Kernel --> LogManager.
    Hope you find the above useful.

  • Where does System.out output go?!!!

    Hi,
    I was wondering where does the output for System.out and such goes to? To which log file in OAS? I couldn't seems to be able to locate the log file storing this information.
    Any comment will be a great help to me, thxs in advance!
    Jason

    zhicheng,
    Regarding you second question ....
    2. Windows Services
    After installation, there are six windows services
    created: XXXAgent, XXXEMWebsite, XXXProcessManager,
    What doesn the above three means? I have tried to
    stop them manually(is there any order to follow?),
    but many times the XXXEMWebsite service failed to
    stop successfully, then I have to restart my
    computer. What's the matter? XXXEMWebsite is the service for starting/stopping the Enterprise Manager of iAS. This represents the file emctl.bat on your file system.
    XXXProcessManager is the file opmn.bat on your file system. This is used for starting/stopping all your iAS Processes.
    I have stopped all the services of iAS on windows several times without facing any problems. Just one word here, I always used to stop the ProcessManager service at the start and EMWebsite service at the last.
    Try if this helps you too.
    Regards.

  • Where does system out or log statements go in ISA-CRM?

    We have added some system out print and log.error statments in a new java class file.
    Can anybody tell where does these statements go, I mean to which log file. I was hoping defaultTrace.0.log, but could n't find.
    We are using CRM/ISA b2b.
    Thanks in advance.

    Mark,
       Here the steps for session trace:
    1. logon to the XCM administrator
    http://mycompnay.com:50000/b2b/admin/xcm/init.do
    2. Go to General Settings->Customer->b2b->b2bconfig.
    3. In the right side frame select true as the value of the parameter logfiledownload.
    4. open URL http://mycompnay.com:50000/b2b/admin
    5. Click on logging - > session tracing
    6. you will see a partial URL in the next jsp page inside a text field. complete this URL for eg.
    http://mycompnay.com:50000/b2b/b2b/init.do
    7. Click start application. This will bring up the logon page in a separate browser window.
    8. In the previous window click Start Session Tracing.
    This will create two hyperlinks with a long name begining with session appended by the date and session ID.
    9. Move to the new window where logon.jsp was started and execute whatever steps necessary in the B2B application till you execute the code segments containing your log entries.
    10. Come back to the previous window and click on the hyperlink for the logfile under the caption "download"
    This will open the session log file as a zip -> text document and you can search for your log entries there.
    Thx,
    Bharat.

  • Where does System.out go on W2K?

    I have built an executable jar file, which writes to System.out
    On Solaris, I can run either of:
         java -jar foo.jar
         foo.jar
    and see the output in either case. But on W2K,
    I can see the output only if I run
         java -jar foo.jar
    If try
         foo.jar
    I see nothing. Is there a way to get output sent to the cmd
    window when invoking using the second syntax on W2K?

    Under W2K you use the automatic file extension execution.
    This is associated with javaw.
    Javaw starts java in a extra process, that is NOT associated with the starting CMD.
    To solve this problem you have to exchange the association of the .jar from javaw to java in the Registry.
    Solution (Sorry, I only know the names in German):
    Open Explorer.
    GoTo "Extras->Ordneroptionen..."
    Tab "Dateityp"
    Select "Neu"
    Enter "JAR"
    Select "Ok"
    Select "Erweitert"
    Select "Neu..."
    Enter by "Vorgang" = "Open"
    Enter by "Anwendung f�r diesen Vorgang" = "<JAVA_HOME>/bin/java -jar %1" (replace JAVA_HOME> with your Java Home directory. e.g. C:\jdk1.3)
    Select "Ok"
    Select "Ok"
    Select "Schlie�en"
    Start a new CMD
    Now start your .jar with foo.jar
    Now you will the the output from System.out

  • Where does System.out.println("") send info?

    Under normal java execution it goes to the java console... where does it go when running a servlet under Tomcat on localhost?

    Output is written to the log file whose location is specified in server.xml. The default is the /logs directory under the tomcat root.

  • Where are all the System.out.printlns sent to?

    I have log4j running but when this fails to load I rely on System.out's to see what went wrong. I checked the application log for the application in application-deployments/<application-name>/home_default_island_1 directory but it doesn't record the System.out's.
    Regards,
    Anthony

    Thanks Avi,
    However the OC4J Home Page is not always the answer to every question. I don't want to sound ungrateful but OAS has way too much documentation. Granted it has alot of features and operating OAS should not be delegated to a lone developer but I can 't be sifting through documentation looking for a simple answer as "Where do System.out.printlns go to"
    I mean simply put OC4J (running inside OAS) has a local log per application application-deployments/<application-name>/home_default_island_1 which I would expect to be the default location for any System.outs to be. Isn't it just logical thinking? I'm not sure exactly what opmn's relationship with OC4J is but from a developer point of view it's a different entity!?!
    For now I'm still refining our development processes for an upcoming project so it looks like I'll be ditching developer testing on OAS full install to running a local OC4J standalone - too much time is wasted deploying an app for a start and there is no easy access to the remote console logs. Also the System.outs in standalone are easily visible anyway.
    Please understand this is not a formal complaint or grudge but a developers desparate cry to try and get a job done.
    Anthony

  • System.out and System.err

    Hi all,
    This is a stupid newbie question, but I could not find the answer on the Web
    site, so here goes: Where do System.out and System.err get written to? I'm
    trying to deploy some plain-vanilla stateless session beans that do a bunch
    of println() calls, but I can't see the output anywhere! The WebLogic
    Console shows no messages, /myserver/weblogic.log has nothing interesting,
    and there are no .log files anywhere that I can see. I even searched /tmp
    and found nothing of interest. What am I missing? Do I have to explicitly
    open a file for System.out and/or System.err? That doesn't sound right...
    - danz

    The simple answer to your questions are no and no.
    I recently logged a problem with BEA WebLogic technical support regarding
    this issue and their response is:
    You have two choices. You can either use standard Java file i/o to write
    your output to a file, or you can use our t3loggingservices to append
    messages into the weblogic.log
    The "jump point" for the logging services is at --
    http://www.weblogic.com/docs51/classdocs/javadocs/weblogic/common/LogService
    sDef.html
    It is actually very easy to use -- after you import the proper packages into
    your web application it is just as easy to use as System.out.println.
    John J. Feigal Voice (651)766-8787 (main)
    Sr. Technical Consultant (651)766-7249 (direct)
    Ensodex, Inc. Fax (651)766-8792
    4105 N. Lexington Ave., Suite 150 email [email protected]
    Arden Hills, MN 55126 WebSite http://www.ensodex.com
    "Jon Wynett" <[email protected]> wrote in message
    news:[email protected]...
    I'm running WebLogic as an NT Service. Is there any way to see the
    System.out.println messages? Can they be redirected to the weblogic.log
    file?
    We were running through a DOS Window and saw all the messages, however we
    ideally want to run Weblogic as a service.
    "Rob Woollen" <[email protected]> wrote in message
    news:[email protected]...
    I'm guessing that you started the server with the .exe file on Windows.
    If you're debugging with printlns, it's generally more conventient to
    use the startWebLogic.sh or startWebLogic.cmd files to start the server
    from a shell.
    By default, you'll see stdout and stderr in the window.
    -- Rob
    Dan Zivkovic wrote:
    Hi all,
    This is a stupid newbie question, but I could not find the answer on
    the
    Web
    site, so here goes: Where do System.out and System.err get written to?I'm
    trying to deploy some plain-vanilla stateless session beans that do abunch
    of println() calls, but I can't see the output anywhere! The WebLogic
    Console shows no messages, /myserver/weblogic.log has nothinginteresting,
    and there are no .log files anywhere that I can see. I even searched/tmp
    and found nothing of interest. What am I missing? Do I have toexplicitly
    open a file for System.out and/or System.err? That doesn't soundright...
    - danz

  • System.out and application.out in JSP Channel

    Can someone tell me where the System.out.println(...) output will go to if I put it in a Desktop JSP Channel?
    Where will application.log("...") send the output to?
    Thanks.

    System.out from servlets and JSPs goes to the container's standard output -- in portal's case, the web server's standard output.
    By default this is /dev/null. If you run 'ipsserver start debug' the output will appear in your terminal window (/dev/stdout).
    This isn't too useful if you have multiple developers, so we changed the definition of the log variable in the do_debug function in the ipsserver script so the output goes to a file under /var/opt when debugging is on.

  • Tomcat Java Servlets, how to log System.out.println() messages

    I have recently installed a new (x86) Mac OS Xserve, and am porting some Java application Servlets from an existing older Mac OSX server. All the servlets were working (I am connecting via port 9006). I have carefully used the old JDK 1.4 compiler, edited my server.xml (for port 9006) and web.xml files, etc. The Tomcat example servlets work fine, and all my (other) servlets work fine, with one exception, where I get the typically vague "java.io.IOException: Server returned HTTP response code: 500" message.
    Trouble is, I cannot get the Java System.out.prinln statements to go to the Tomcat/logs/ log files (they are all there and updating with Tomcat HttpServlet messages), in order to properly debug.
    Is there a server.xml value somewhere I can make the change?
    On another minor (possibly related) point, does anyone know what the path info ='null' means in the Tomcat access log? e.g.,
    StandardContext[/my_servlets]: Mapped to servlet 'myServlet' with servlet path '/myServlet' and path info 'null'
    It is the only other suspicious message I get in all the logs.
    One other point: my java application that fails uses threads. All the individual classes that use the threads work when run interactively, but as soon as I call them from final Serlet class that extends HttpServlet, I get a null pointer exception. Is there something unique about the Tomcat 4.1 threading that could be causing it?
    I want to avoid upgrading to Tomcat 5 at this point, if I can avoid it. My applications are modest in scope, and the last time I upgraded to Tomcat 5, it took me days to get it working properly, and I lost all access to it from the Server Admin application.

    I have found a solution: Via the Tomcat Admin web page I set the Context field "Swallow Output" to "true".

  • Tomcat 4.0.1 on Linux, system.out.prinln() not working

    I recently installed Tomcat 4.0.1 on RH Linux 7.2 and I am trying to develop some servlet- and JSP-based applications. I've set up everything according to the instructions, however, I'm finding that when I put a system.out.println(somestring) statement in my servlet and I have a console window open, nothing is printed out on the command line.
    In the past when I was using Tomcat 3.1 that was not a problem.
    Thanks,
    Ethan

    err. did you check "catalina.out" in the logs
    directory ?
    rahulOK, I just did, and there's the output from my print statements. I didn't know that's where standard output goes. Thanks for the information.
    Ethan

  • System.out.println not working in Tomcat-4.1.x

    System.out.println not working in Tomcat-4.1.24. Any settings has to be enabled??? I am using tomcat for Solaris

    I think u can use ServletContext.log() to output info instased.

  • Where to see the System.out.println() messages

    I deploy my application in Oracle9ias . I have some System.out.println() statements in java class files.
    When I run the application I need to know where I can see those println() statements.

    The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the Application Server-General forum. The URL is:
    Oracle Application Server - General

  • Where to see the System.out.println statements on soa server.

    Hi,
    I have generated some proxy classes in my jdeveloper. And I have deployed that project to the admin server on my soa_domain.
    Now my java files have some System.out.println statements. I want to see those values.
    Can anyone please let me know where I can see those statements on server.
    What s the file name where i can see.
    do i have to enable some debigging on the server. if yes then for what level i need to enable the log at what level.
    Thanks
    Anoop

    Hi,
    System.out.println is not really a good way to debug in weblogic... If you didn't configure where the stdout will go those messages can end up going nowhere...
    I suggest you use one of these...
    This will go to the soa*diagnostic logs... for example DOMAIN_HOME/servers/soa_server1/soa_server1-diagnostic.log...
    import java.util.logging.Level;
    import java.util.logging.Logger;
    import oracle.fabric.logging.LogFormatter;
        private static final Logger soa_logger = Logger.getLogger("oracle.soa.Logger");
        static {
            LogFormatter.configFormatter(soa_logger);
            soa_logger.log(Level.INFO, message);
            soa_logger.log(Level.INFO, message, t);or
    This will go to the server logs... for example DOMAIN_HOME/servers/soa_server1/soa_server1.log...
    import weblogic.logging.NonCatalogLogger;
        private static NonCatalogLogger weblogic_logger = new NonCatalogLogger("SomeMeaningfulNameHere");
            weblogic_logger.notice(message);
            weblogic_logger.notice(message, t);Usually info and notice will go to the logs by default, you can try with higher levels (error,warning) as well or you can tweek the server debug level to use lower levels...
    Cheers,
    Vlad

  • Where does the logging happens for System.out.println

    Hello:
    I'm usingNetWeaver 2004sJava SP9 evaluation version. Added some System.out.println to the ejbs. Would like to know where to look for the logging details in this case.
    Thanks for your help,
    Ravi

    Hi,
      By default, if the setting has been done, then it appears in defaultTrace as mentioned. For configuration of it, refer to this link.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/db315878-0801-0010-928e-98c8283616d3
    Reward points if it helps.
    Regards,
    Vijai

Maybe you are looking for