Where is the prompt?

Hi
I install weblogic 6.0 in sun solaris 8 machine...when i start
the server whith the script startWebLogic.sh I see :
Starting WebLogic Server ....
<Aug 8, 2001 5:54:16 PM GMT+01:00> <Notice> <Management> <Loading configuration
file ./config/beadomain/config.xml ...>
log file: /usr/bea/wlserver6.0/./config/beadomain/logs/weblogic.log
<Aug 8, 2001 5:54:20 PM GMT+01:00> <Info> <Logging> <Only log messages of severity
"Error" or worse will be displayed in this window. This can be changed at Admin
Console> beadomain> Servers> beatest1> Logging> General>
Stdout severity threshold>
<Aug 8, 2001 5:54:39 PM GMT+01:00> <Notice> <WebLogicServer> <ListenThread listening
on port 7001>
<Aug 8, 2001 5:54:39 PM GMT+01:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 7002>
<Aug 8, 2001 5:54:39 PM GMT+01:00> <Notice> <WebLogicServer> <WebLogic Server
started>
...but the prompt it does not come given back... is it normal?
if it isn't normal where is the problem? ...and the solution?

HI Stefano,
If you look at the startWebLogic.sh script, we do not run the server as
background, so you will not have the prompt come back. You can modify the
scirpt and append a & at the end of the java command to run it as
background. then you will have the prompt back. also you may want to change
the logging to have all the information from the server logged. you can do
it from console --> Servers--->myserver then on the right panel choose
logging, and modify it.
Thanks
Yu
"Stefano " <[email protected]> wrote in message
news:[email protected]..
>
Hi
I install weblogic 6.0 in sun solaris 8 machine...when i start
the server whith the script startWebLogic.sh I see :
Starting WebLogic Server ....
<Aug 8, 2001 5:54:16 PM GMT+01:00> <Notice> <Management> <Loadingconfiguration
file ./config/beadomain/config.xml ...>
log file: /usr/bea/wlserver6.0/./config/beadomain/logs/weblogic.log
<Aug 8, 2001 5:54:20 PM GMT+01:00> <Info> <Logging> <Only log messages ofseverity
"Error" or worse will be displayed in this window. This can be changed atAdmin
Console> beadomain> Servers> beatest1> Logging> General>
Stdout severity threshold>
<Aug 8, 2001 5:54:39 PM GMT+01:00> <Notice> <WebLogicServer> <ListenThreadlistening
on port 7001>
<Aug 8, 2001 5:54:39 PM GMT+01:00> <Notice> <WebLogicServer><SSLListenThread
listening on port 7002>
<Aug 8, 2001 5:54:39 PM GMT+01:00> <Notice> <WebLogicServer> <WebLogicServer
started>
...but the prompt it does not come given back... is it normal?
if it isn't normal where is the problem? ...and the solution?

Similar Messages

  • Showing a parameter on the prompt where user can pick a value drom dropdown

    Hi All,
    I have a requirement to display a parameter in the applet prompt that shows user a LONG picklist of values to choose and then submit the BIP report request under Siebel.
    I now the syntax to declare a parameter with few list of values but how to manage if the list is too long.
    e.g. a list of Countries that are in the system today.
    Please give me some suggestion as to how we can handle a long list of values when need to display it against a parameter.
    Thanks,
    Raghu

    It must be a generic requirement to display a dropdown in the prompt applet but what if the list of values expected in the drop down are too long. Can we still accommodate it by defining the parameter string in the RTF.?
    Please suggest some solution here.
    Regards,
    Raghu

  • Changing the report displayed on the basis of value selected frm the prompt

    Hi,
    I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
    The user will select the report name from the prompt, once done the report that has been selected should show up
    on the dashboard page and he should be able to select data on the basis of month and year from it.
    Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
    Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
    need two prompts one for report name and the other for month and year.
    Thx :)

    Hi Kishore,
    When i click on the link given by you it takes me to a page where a link is given with text as under
    Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
    And when i click on this nothing opens up.
    Thx
    Edited by: Phantasm on Jun 22, 2010 3:05 AM

  • How to use the prompted value in the filter expression

    Hi
    Is it possible to use the prompted value in the filter expression?
    My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
    If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
    If there are other ways to acheive the desired results then please suggest.
    Thanks
    -Jaz

    Edit: example added
    SQL> create table tb_test
      2  ( id number(5)
      3  , tot number(5)
      4  , mon_tot number generated always as (tot*15) virtual
      5  );
    Table created.
    SQL> insert into tb_test (id, tot) values (1, 5);
    1 row created.
    SQL> select * from tb_test;
            ID        TOT    MON_TOT
             1          5         75
    1 row selected.
    SQL> update tb_test
      2  set    tot = 15
      3  where  id = 1;
    1 row updated.
    SQL> select * from tb_test;
            ID        TOT    MON_TOT
             1         15        225
    1 row selected.

  • 'Unspecified' value in the Prompt drop down

    Hi All,
    I am facing a very unusual issue in my report.
    The 'Unspecified' value keeps showing up in the Prompt drop down even if doesn't really exist in the Database.
    This 'Unspecified' value refers to the NULL value.
    I have tried using a filter on that field with filter "is Not Null', but this does not seem to work either.
    I am stuck.
    Does any one have a solution to this?
    Many Thanks,
    -Roy

    Try this simple thing:
    for your prompt field in the design, select sql results under show option and write a query that SELECT field name FROM ... WHERE field name NOT NULL.
    That's it, no need of filter in the report.

  • Schedule a Webi XIR2 report to run for all values of the prompt ...

    Hi there,
    Any ideea about if it's possible to schedule a Web Intelligence XIR2 report to automatically run for all  150 different prompt values in the LOV (and have 150 different instances)?
    BOXIR2, Java deployment.
    Many thanks.

    You'd be scheduling the document 150 different times, each for one value of the LOV.
    You'd use the ReportEngine (REBean) SDK to read the LOV values, then use the Enterprise SDK to schedule.
    Here's a bit of code that illustrates how to schedule a Webi doc a single time with specified prompts.  You'd do something similar, but iterate the prompt setting and scheduling:
        IInfoStore iStore  = (IInfoStore) eSession.getService("InfoStore");
        ReportEngine reportEngine =  ((ReportEngines) eSession.getService("ReportEngines"))
                                        .getService(ReportEngines.ReportEngineType.WI_REPORT_ENGINE);
        IInfoObjects objs = iStore.query("Select TOP 1 * From CI_INFOOBJECTS Where "
                                          + " SI_KIND='Webi' And SI_INSTANCE=0 "
                                          + " And SI_NAME = '" + reportName + "'");
        //============================================================================
        // Open Webi document, then get and set Prompts collection
        //============================================================================
        IWebi            webi    = (IWebi) objs.get(0);
        DocumentInstance di      = reportEngine.openDocument(webi.getID());
        Prompts          prompts = di.getPrompts();
        for(int i = 0, m = prompts.getCount() ; i < m ; i++) {
            Prompt prompt = prompts.getItem(i);
            String name   = prompt.getName();
            if("Enter value(s) for State:".equals(name)) {
                Lov lov = prompt.getLOV();
                lov.refresh();
                Values values = lov.getAllValues();
                prompt.enterValues(new ValueFromLov[] { values.getValueFromLov(0),
                                                        values.getValueFromLov(1)});
            } else if ("Enter Shop Id:".equals(name)) {
                prompt.enterValues(new String[] { "261" });
        //===========================================================================
        // Copy prompts over to InfoObject
        //===========================================================================
        PromptsUtil.populateWebiPrompts(prompts, webi);
        //===========================================================================
        // Schedule Webi report to run once now
        //===========================================================================
        webi.getWebiFormatOptions().setFormat(IWebiFormatOptions.CeWebiFormat.Webi);
        ISchedulingInfo schedInfo = webi.getSchedulingInfo();
        schedInfo.setRightNow(true);
        schedInfo.setType(CeScheduleType.ONCE);
        iStore.schedule(objs);
    Sincerely,
    Ted Ueda

  • Where did the link to Mail go!!?

    OK. I am totally confused and lost, and getting very frustrated.
    I can no longer simply go to Mail via Safari.
    I go here:
    http://www.apple.com/
    and there is no link to mail.
    So I click Mac. And it takes me to this:
    http://www.apple.com/mac/
    Still no sign of Mail. I am looking all over this page. There is a “Why You’ll Love a Mac,” “watch ads,” .Mac, but it is not a link. Under that is a link to log in (I am already logged in but, ok, I’ll try it anyway.)
    That takes me to http://www.apple.com/dotmac/. STILL NO SIGN OF MAIL! Instead, it’s a bunch of prompts for signing up for a .Mac account. (I have one and have had for three years.)
    Where is mail?

    But, Simon...
    where is the link to mail?
    I did use your link (as I have before) but nowhere on this page is there a link to mail. Is it hidden somewhere? Is it a secret? All I see are ads for using .Mac.
    This is what I see:
    • Tour .Mac
    • One-click web publishing
    • Photocast with iPhoto
    • Exchange files from anywhere
    • Communicate Apple style
    • Bring groups together
    • Stay in sync
    • Backup your life
    • How it works
    • .Mac in action
    • Membership options
    Where the heck is Mail? And why did Apple decide to make it so difficult to find?

  • Where are the regular maintenance updates?

    Most expensive/professional software I own licences for
    receives maintenance updates and bug fix patches on a regular
    basis. Even with shareware and freeware, the patches and updates
    just keep coming. Flash Professional should certainly be no
    different, there's more than enough bugs to warrant some fixing.
    But what did we get? Nothing! Some measly updates for the Flash
    player, that's all. Clearly Adobe/Macromedia cannot be trusted in
    this department, they just move on to the next project and leave
    users to wrestle with bugs.
    A few examples off the top of my head:
    - The new smoothing algorithm introduced in Flash 8 is
    kaputt. It blurs bitmaps even when they're shown in 1:1 scale,
    anti-aliasing intentionally aliased stuff. Clearly there's some
    rounding error or something messing with the scale of things. For
    example, I used Flash 7 to make document and application icons in
    128x128. They fit exactly to the pixel grid and when I exported
    them from Flash 7 they were sharp as can be. When I export the same
    icons to PNG from Flash 8 at 128x128, using the same source files,
    the edges are suddenly blurred. With some trial and error I
    discovered that I had to export them in 129x129 in order to make
    them look as they did from Flash 7, then crop the picture in
    Fireworks to 128x128.
    - "Convert Lines to Fills" is a mess. It generates a
    completely warped rendition of the selected lines if they overlap.
    You have to walk Flash through the process by selecting a few lines
    well away from eachother, move them away from the rest, convert to
    fills, then repeat this process until you finally get a WYSIWYG
    rendition of the lines you wanted to convert.
    - Various UI graphics bugs. For example if you drag-select
    across a number of layers and frames in the timeline and insert or
    delete, leftovers from the black selection rectangle are still
    visible in the timeline. You have to minimize/maximize the window
    to make it redraw correctly.
    - If I enter W/H/X/Y coordinates for an object, say "10.0",
    it's because I want exactly 10.0. I don't want Flash to arbitrarily
    change it sometimes to 10.1 or 9.9. Sometimes you have to enter it
    twice to make it stick.
    - Flash 'forgets' parts of audio files in the library. I
    import a lot of WAV files to the library, and sometimes a few saves
    down the line I discover there are mysterious silent gaps in the
    audio. I have to re-import the files again to fill these gaps.
    - FlashPaper (it installed correctly on very few computers,
    you had to fix it in a DOS prompt, or FlashPaper would just hang
    when you try to print). I've also had complaints that my FlashPaper
    rendered PDF:s won't open in Mac OS X.
    These are just a handful of examples I can think of at the
    moment, I know I've stumbled upon dozens more and I'm sure there's
    a collective pool of thousands. What I want to know is why
    Adobe/Macromedia feels it's OK to not bother with maintenance
    updates and fixes for a product of this price and magnitude? It's a
    despicable business practice I would expect from shady vaporware
    peddlers.

    It's only your perspective that "nobody seems to care" that
    couldn't be anymore incorrect - I see it
    first hand how dedicated and caring the developers of flash
    are.
    I wont get into a platform war either - but i clearly
    remember the MS promotion MS was using
    claiming the new "Innovative" features of IE7 - specifically
    showcases their new tabbed browsing
    feature and popup stopper - FF had that long before them -
    hardly innovative.
    Vista looks and acts very much like Mac OS - at least on the
    surface. It's so blaringly obvious to
    me that they must have been studying OSX when they were
    deisigning Vista.
    Anyway - i dont really care about OS - and your points are
    totally valid - I'm a PC user only
    because flash always runs better on PC then MAC.
    I just think your claims that nobody cares and complacency
    within Adobe are ill-founded - I am very
    much closer to the people that you are talking about and see
    their dedication first hand for years -
    unless you are as close or closer, it's hard for me to agree.
    But if you feel this way from a users POV - then perhaps
    something is wrong on a marketing level or
    some other area. Flash 8 was developed by Macromedia - the
    next version of flash will be developed
    by Adobe - let's hold of on judging them until they come out
    with the next version - until then,
    complaints of non caring and complacency simply hold no
    weight.
    -regards
    -c
    ~~~~~~~~~~~~~~~~
    PitchBlank wrote:
    >>I don't understand the logic of calling Adobe a
    "monopoloy".
    >
    >
    > It couldn't get any more logical, IMHO. Adobe and
    Macromedia were the two
    > biggest actors in the game, and have (had?) quite a few
    overlapping products
    > (Freehand/Illustrator, Fireworks/ImageReady/Photoshop,
    GoLive/Dreamweaver).
    > Then the two companies became one. While this doesn't
    constitute a bona fide
    > monopoly as such, it's pretty damn close. It's like
    Microsoft buying Apple -
    > right, so there's still Linux, but it's not like Linux
    inspires competitors to
    > innovate...
    >
    > > To be honest - I don't want a new set of tools that
    do the same thing.
    >
    > Neither do I, but Adobe still needs competition or
    they'll become more
    > complacent than they already are.
    >
    > > MS is famous for duplicating (stealing) ideas from
    others before them and
    > calling it "innovative" (example; IE7, Vista).
    >
    > I don't recall MS ever calling IE7 innovative, and I
    don't get this whole
    > plagiarism thing with Vista. Where's the ripoff?
    Gadgets? Apple stole that from
    > Konfabulator. Instant Search? Apple implemented
    Spotlight only *after*
    > Microsoft had showed off their instant search. The
    interface? I don't see
    > transparent window elements prominently featured in OS
    X, and Apple hardly
    > invented the 3D look and feel with drop shadows around
    windows. The Vista UI
    > isn't a ripoff, it reflects the current fashion in UI
    design. If bell bottom
    > pants come back, both Lee and Levi's will make them,
    without one ripping off
    > the other. OS X features several Windows ripoffs (Time
    Machine, Spotlight,
    > automatic OS updates etc - and Microsoft had its Media
    Player in place back
    > when Mac users were still fiddling with crummy shareware
    like SoundJam), but
    > nobody wants to hear about those because they think
    Steve Jobs is Jesus.
    >
    > Anyway, I don't want to get into the whole platform war
    thing, my point was
    > that Flash is buggy as hell and nobody seems to care,
    especially not Adobe. I
    > was expecting replies more along the lines of "No, it's
    not buggy at all, it's
    > flawless and you're a moron".
    >

  • How to create a text variable for Calender Yr/Month depending on the prompt for calendar year

    Hi everyone
    Please assist on this issue:
    i have created a Bex report that has an offset for 12 months from the current calender month, i tried to use text variables to replace the calender months but i just learned now text variables from Bex dont work in BO, so I would like to create a prompt in BO to enter Calendar Year and then based on the input(Calender Year) the Webi report must display a 12 months for that Year.
    Please also indicate where exactly  i have to click in order to get that "Helpful icon "  when the my issues have been resolved, because i searched it and havent seen it anywhere on the communications
    Thanks in Advance
    Ole

    Hi Gill
    In BO I recieve my all months for existing data  and when i create a prompt for Calender Year the months in the report still has those text varibale for exampl if i enter 2011 on the prompt the text remains for the year that was already there wen i created my text variable... so its not dynamic.....
    So if i have text variables in Bex it will display like this in Webi in which it wont change if i put in 2011 as input for the prompt...

  • Where is the right path to deploy third party DLL? "Support Files"?

    Hi, After Effetcs developers:-)
    Here is question about install path of DLL for After Effects plug-in.
    I'm developing Effects plug-in run with CUDA, so I have to deploy third party DLL to client PC.
    So where is the right path to put DLL such as cudart32_30_14.dll?
    I think it's under "Support Files", because my plug-in runs with cudart32_30_14.dll
    in "C:\Program Files\Adobe\Adobe After Effects CS4\Support Files"
    Am I right?

    well... that depends.
    when you rely on an external library, the external dll is expected to be somewhere along the path, as it appears in the command prompt.
    places like win32, and sxs folders are in that path.
    you could also put the support dll in the same folder as your plug-in. any process automatically includes it's own directory in the search path.
    if you don't want to put it in any of these pre-set locations, then you have to program the path into the dll loading function.
    if you choose to do that, you can put the support dll anywhere you like.

  • Where is the remote button located in iTunes?

    Hello Community,      
            I updated both the Remote app and iTunes to the most recent iTunes 11. When I got to enter my Passcode to add my iTunes library it prompts me to "open iTunes on your computer and selct "yourdevice" from the Devices list. I go into iTunes but can't seem to know where to go. Where would the remote button be located?
    In iTunes Help center directions are as stated:
    "Pair Remote with an iTunes library
    1.Tap Remote on your device’s Home screen.
    2.Tap Add an iTunes Library.A 4-digit code appears.
    3.Open iTunes on your computer and click the Remote button .
    4.Type the 4-digit code in the iTunes window.iTunes pairs the library on your computer with the Remote app on your device."
    If you can help please direct me in the easiest way possible. Thanks!

    Still no answer to this important question, nearly a year after it was posted? WHERE IS THE REMOTE BUTTON that we are supposed to pair Remote app on the iPhone with? Here's what the help file says in French :
    Jumeler Remote avec une bibliothèque iTunes
    1. Touchez Remote sur l’écran d’accueil de votre appareil.
    2. Touchez Ajouter une bibliothèque iTunes.Un code à 4 chiffres apparaît.
    3. Ouvrez iTunes sur votre ordinateur, puis cliquez sur le bouton Remote .
    4. Tapez le code à 4 chiffres dans la fenêtre iTunes.iTunes jumelle la bibliothèque de votre ordinateur avec l’app Remote de votre appareil.
    NO REMOTE BUTTON ANYWHERE IN ITUNES THAT I CAN SEE... HELP!

  • Is there any difference in the prompts of UCCX 7 (Windows based) and UCCX 9 (Linux based) ?

    Are the prompts for UCCX 7 (windows based) and UCCX 9 (Linux Based) are different ?
    There are no default prompts available in the script editor folder of UCCX 9.
    I have downloaded some prompts from the internet with .wav format, but those prompts are not working.
    Can someone tell me if the prompts are different and if they are really different, where to get those prompts then ?
    I have also attached the prompts i have downloaded from the internet.

    Nope, there's no difference.  UCCX uses either G711 or G729 encoded files.  You have to encode them first before you upload them.  UCCX will not encode them like CUCM does for MOH files.  In fact, you can use CUCM's MOH file encoding to encode your files for use within UCCX.
    Also, you will not see the system prompts on your workstation where you installed the script editor.
    What is it that you are trying to do?
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • The Prompt on combo box is not disappearing after a value is selected.

    Hi guys,
    I am putting in the prompt "Course Category" which starts off black and when a value is selected it turns grey but doesn't disappear, obscuring the selected value.
    I have tried putting in the line course_step1.prompt = ""; in the post selection part of the code but this has no effect.
    Interestingly when I test just this scene and not the whole movie this problem dosen't occure.
    This is a quote from my code I hope it gives you the idea...
    Thanks in advance,
    var course_step1:ComboBox = new ComboBox;
                    sophia_page2.addChild (course_step1);
                    course_step1.x = 245;
                    course_step1.y = 12;
                    course_step1.width = 200;
                    course_step1.dropdownWidth = 300;
                    course_step1.prompt = "Course Category";
                    course_step1.dataProvider = new DataProvider(cat_array);
                    course_step1.addEventListener(Event.CHANGE,select_cat);
                    function select_cat(event:Event):void
                                    var cat_select:String =(course_step1.selectedItem.data);
                                    course_inst1.textColor = 0x999999;
                                    course_inst2.textColor = 0x000000;  
                                    course_inst3.textColor = 0xCBDEF5;
                                    course_step1.prompt = "";
                                    //trace ("http://onedev/one/Sophia/CourseQuery2.asp?Cat=" + cat_select);
                                    var cat_selecturl:String =("http://onedev/one/Sophia/CourseQuery2.asp?Cat=" + cat_select);
                                    var xmlq2:XML = new XML ();
                                    var q2theURL_ur:URLRequest = new URLRequest("xmlq2.xml");
                                                           //replace with cat_selecturl ---- test with "xmlq2.xml"
                                    var q2loader_ul:URLLoader = new URLLoader(q2theURL_ur);
                                   q2loader_ul.addEventListener("complete", q2fileLoaded);
                                    function q2fileLoaded(e:Event):void
                                                    xmlq2 = XML(q2loader_ul.data);
                                                    //trace (unescape (xmlq2));
                                                   course_step1.prompt = "";

    Check the HTML source. Is any code after the initial option present (ie the </select></td>)? If not then you are getting an error that is masked by the fact that you already committed the response. Look into your logs.
    If the HTML source looks fine I fall back to my previous answer and you need to re-check the messages closer to where the work is being done. Though it never hurts to check the log files.

  • Where is the iphoto plist file in Mountain Lion

    I upgraded to ML and iPhoto 9.3.2 and imported a few GB of photos. After the import iPhoto started crashing. It seems like the first step is to delete the plist file but I can't find it in ML. Anyone know where it is?

    Usually would be found in the /Home/Library/Preferences/ folder. However, that particular Library folder is invisible. You can make it visible:
    Open the Terminal in the Utilities folder. Paste the following line at the prompt:
    chflags nohidden ~/Library
    Press RETURN.
    You should then be able to peak inside the preferences folder.

  • Where is the location of isight photo for new osx account?

    Hi all - my first post....
    When a new account is created and the (inbuilt) isight camera is used to take a login photo, where on the OS is that photo stored and in what format?
    Sorry if it's basic, but I've searched high and low for ages...
    David
    intel laptop   Mac OS X (10.4.9)  

    Welcome to Apple Discussions, David
    While your question may be basic, the answer is not so simple.
    Yours is actually a question about how OS X works rather than iSight.
    See Niel's Nov, 2006, response to Bernhard VonZastrow1's question in:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=3532758
    Because this old post has been archived and will be removed from view before this topic is, I quote Niel's response here for the record:
    The login picture can be anywhere on the hard disk; to find its current location, open the NetInfo Manager in the /Applications/Utilities/ folder, and check the picture property for your user account.
    To find this property for a system other than the one currently used to start up the computer, open the Terminal application in the /Applications/Utilities/ folder and run the following command:
    sudo nicl -raw '/Volumes/volumename/private/var/db/netinfo/local.nidb' -read users/username/
    This command will prompt you for your administrator password; nothing will appear in the Terminal window while it is being typed. Look for the picture line in the output to find the path.
    (17705)
    If Niel's response answers your question, please let us know, but wait for Niel to post here so you can credit him with the "Solved" points he deserves.
    If you need more help of info about this topic, you might want to post in Tiger Forums > Administration, Accounts & Login Discussions. Niel and other very smart folks will help you with your OS X questions there.
    Cheers,
    Jim
      Mac OS X (10.4.9)    G5 DP 1.8  External iSight

Maybe you are looking for

  • Error while running report in DocViewer region through OAF .

    I am trying to run a report , on my custom region embedded in seeded page of service request module. I have extended region : "/oracle/apps/xdo/oa/common/webui/DocumentViewerRn.MainRegion" I followed the steps in this thread : http://apps2fusion.com/

  • Restrict the value choice of a attribut in xml schema

    how can i restrict an attribute value to a list of value, instead of one value by "fixed" key word? something like "option" key word in html? thanks

  • Re: My license for Adobe CS6 suddenly expired

    I also have the student but I didn't buy it through my school, so no help there, I bought it directly from Adobe. I didn't download it, I had them mail me the disks in case of a pc crash. So now that very thing happened and I had to reformat my Hard

  • Just got a new imac and it works great

    Just got my imac week 00 and it works great. have not seen one flickero or yellow tinge issue. The hard drive is a segate and it is very quiet. I just love the computer. P.S. what should my first piece of software for it be?

  • HT203097 Unable to send group SMS on IOS8

    Hi Expert, when I am sending SMS more than 1 contact it can not send send a message "Not Delivered"