Where to pass picking quantity value in BAPI_OUTB_DELIVERY_CREATENOREF

Hi All
this is usha
iam using BAPI for sales order creation and outbound delivery.
can any one suggest me where to passthe Picking quantity values in the BAPI_OUTB_DELIVERY_CREATENOREF and SD_SALESDOCUMENT_CREATE.
Thanks in advance.

Hi
Check If this BAPI name is right?? :BAPI_OUTB_DELIVERY_CREATENOREF.
It says does not exist.
Regards,
Vishwa.

Similar Messages

Showing a parameter on the prompt where user can pick a value drom dropdown

Hi All,
I have a requirement to display a parameter in the applet prompt that shows user a LONG picklist of values to choose and then submit the BIP report request under Siebel.
I now the syntax to declare a parameter with few list of values but how to manage if the list is too long.
e.g. a list of Countries that are in the system today.
Please give me some suggestion as to how we can handle a long list of values when need to display it against a parameter.
Thanks,
Raghu

It must be a generic requirement to display a dropdown in the prompt applet but what if the list of values expected in the drop down are too long. Can we still accommodate it by defining the parameter string in the RTF.?
Please suggest some solution here.
Regards,
Raghu

WS_DELIVERY_UPDATE_2 - picked quantity with negative values

Hello All,
I have a problem when I call function WS_DELIVERY_UPDATE_2.
I have to update picked quantity from the delivery. If I have to update qty from 2 to 3, there is no problem. The corresponding parameter (pikmg) will contain '1' and the new values will be 3.
But the problem is when I want to have a smaller value. If I have to update qty from 3 to 2, the parameter will contain '-1' , but this parameter can only have positive values, so an error message is returned.
Does anyone know how to specify a smaller picked quantity or how to decrease this quantity?
Can anyone help me?
Many thanks in advance.
Best Regards

check if you are passing the below parameters.
CALL FUNCTION 'WS_DELIVERY_UPDATE_2'
    EXPORTING
      vbkok_wa                  = ls_vbkok
      no_messages_update_1      = 'X'
      commit                    = 'X'
      delivery                  = p_delivery
      if_error_messages_send    = ' '
    IMPORTING
      ef_error_any              = lv_error_any
      ef_error_in_item_deletion = lv_error_in_item_deletion
      ef_error_in_pod_update    = lv_error_in_pod_update
      ef_error_in_interface     = lv_error_in_interface
      ef_error_in_goods_issue   = lv_error_in_goods_issue
      ef_error_in_final_check   = lv_error_in_final_check
      ef_error_partner_update   = lv_error_partner_update
      ef_error_sernr_update     = lv_error_sernr_update
    TABLES
      vbpok_tab                 = p_vbpok
      tvpod_tab                 = p_tvpod.

Table where picking quantity is

Hi,
Im looking for the table where the picking quantity of a delivery is saved. I thought it was lips but its not.
Could you tell me, please?
Thank you,
Manel

Hi,
Yes you have to use..VBFA-RFMNG.
Ex..
DATA: V_RFMNG TYPE VBFA-RFMNG.
SELECT SUM(RFMNG) INTO V_RFMNG
              FROM VBFA
              WHERE VBELV = 'Delivery number'
              AND       POSNV = 'Delivery item number'
              AND       VBTYP_N = 'Q'.    " This is required to get the correct picked quantity.
Thanks
Naren

Picked Quantity to be made equal to Delivery Quantity in VL02n

Hello Experts,
Have a requirement, where upon when entering in VL02n with a delivery no, the Picked Quantity field (LIPSD-PIKMG) should be equal to Delivery Quantity (LIPS-LFIMG).
Only the exit USER_EXIT_READ_DOCUMENT of include MV50AFZ1 is being called when entering VL02n and in that i tried changing the value of LIPSD structure and even tried changing XVBFA-RFMNG field value, but it is not working.
I understand that LIPSD is structure and noticed that picked quantity is getting stored in VBFA-RFMNG field...
Please let me know if any one have come across the same requirement and resolved it technically, rather than functional approach of EK00 condition type or making the item category as non relevant for picking, we tried these options and it is not working for the business. I got to see many previous threads on this topic, but there was no conclusion or technical solution provided.
So looking for TECHNICAL solution based on your experience and whether it is resolved. Its kind of urgent and would appreciate the help of experts who have resolved it earlier. thanks

OK got it resolved.
We have to use BADI LE_SHP_DELIVERY_PROC, methods CHANGE_FIELD_ATTRIBUTES and CHANGE_DELIVERY_ITEM. And it works.
thanks

How to Pass dashboard prompt value to RPD variable??

Hi Experts,
I am creating RPD variable with below query in initialization block
SELECT extract(month from Max(report_date)) from xyz_date_dim where report_id=14 and year=:YEAR
I am having YEAR prompt in dashboard..from this RPD variable i want to get MAX(month) from selected year in dashboard.Here my problem is unable to pass selected YEAR to RPD Initialization block.
I read some threads we can pass user selected values to session variables. If possible can any one help me how to pass variable to achieve my requirement.
can any one help me in this....
Thanks,
KSS.

So you want to pick a month in a dashboard prompt and have the answers report filter for that month, and return results for that month, month -1, month -2 etc etc.
If so try the following, lets assume your measure is simply called 'count'
in the BMM you have measure 'count' with aggregation set.
Create a new measure in the BMM called 'count MAGO' or whatever you want (this will be month -1)
in the logical forumula for that column, use the AGO function, syntax would be AGO(count measure,<time dimension.Month>, -1) - this function is found under the 'Time Series Functions' category.
repeat steps to create 'count 2MAGO' and use -2 in the AGO function to take off 2 months.
Repeat for however many Mth Ago's you want.
Then in answers, simply use is prompted on your month fied to filter the report for the relative month, select your 'count', 'count MAGO', 'Count 2MAGO' etc, the measure will be calculated for prior months relative to your filtered month.
Sorted?

Update picking quantity in delivery (Batch split items) using function modu

Hi All,
I need to update a picking quantity with zero value in delivery for batch split items (Item numbers start with 900001. etc).I'm trying to use WS_DELIVERY_UPDATE
and SD_DELIVERY_UPDATE_PICKING. I'm passing parameter VBKOK-KOMUE , and all other details, but it is not updating.
I'm able to update delivery quantity of same item with zero value but not picking quantity.
Could you please let me know how to achive this.
Regards
Vikram

I think the number 900001is mean batch split line item.
example:
In Deivery Note:
Item 10
     Batch 900001
     Batch 900002
Item 20
     Batch 900003
     Batch 900004
That right,

Updating picked quantity, gross and net-weight in delivery

Hello Experts,
I have created a program from which I am trying to update the picked quantity, gross and net-weights into an outbound delivery. This works in the normal scenario when the base UoM, sales UoM and the gross and net-weight UoMs are the same.
However, when these UoMs are different, I have to carry out a conversion according to the UoM being used for each of the quantities mentioned. In such a scenario, the BAPI returns the following messages: -
Error message: - Error in document 0080005487 item 00010 (quantity consistency check) [Message Class VLBAPI; Message Number 004]
Warning message: -Quantities 0.0000000000000000E00 and 0.0000000000000000E00 cannot be represented by conv. factors 87,658 and 39,761 [Message Class VL; Message Number 266]
The BAPI that I am using is BAPI_OUTB_DELIVERY_CHANGE.
For the parameter ITEM_DATA, these are the values, that I am passing: -
DELIV_NUM: - 80005487
DELIV_ITEM: - 00010
Material: - 30020596
DLV_QTY: - 4
DLV_QTY_IMUNIT: - 8.818
FACT_UNIT_NOM: - 87658
FACT_UNIT_DENOM: - 39761
GROSS_WT: - 1.004
NET_WEIGHT: - 0.004
UNIT_OF_WT: - TO
UNIT_OF_WT_ISO: - TNE
SALES_UNIT: - KG
SALES_UNIT_ISO: - KGM
BASE_UOM: - LB
MATERIAL_EXTERNAL: - 30020596
MATERIAL_GUID: - DD7B9B2F133B61F1B6DF0015C5891481
Please note that the delivery I am trying to update has the following units: -
Base UoM: - Lb
Sales UoM: - Kg
Gross & Nt Weight: - TO
Please let me know if there is any other value in the item_data internal table or any other parameter of this BAPI that needs to be initialized.
Please respond ASAP. I have been struggling with this issue for quite some time.
Regards,
Divyaman Singh Rawat

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_outb_delivery_change&adv=false&sortby=cm_rnd_rankvalue
Will help you out

Update Picking Quantity using 'WS_DELIVERY_UPDATE_2' - URGENT

Hi Experts,
I am struck with an error in updating the delivery. I am using an rfc WS_DELIVERY_UPDATE_2 which is updating the picking quantity one for the first time in a delivery with two delivery quantity in a batch but when iam using it for the other one it is not updating the quantity. I think the parameters which iam passing to RFC might be wrong. I am using the rfc as follows:
CALL FUNCTION 'WS_DELIVERY_UPDATE_2'
        EXPORTING
          VBKOK_WA             = WA_VBKOK
          SYNCHRON             = 'X'
          DELIVERY             = DEL_NBR
          UPDATE_PICKING       = 'X'
          COMMIT               = 'X'
          IF_DATABASE_UPDATE_1 = '1'
        TABLES
          VBPOK_TAB            = TAB_VBPOK
          PROT                 = I_PROTT.
Please correct me if anything is wrong in the interface.
Any quick response will be appreciated & rewarded.
Thanks

Hi seshu,
It is triggering an error tht interface is not complete.
so i changed the code:
tables: vbfa.
DATA : WA_VBKOK LIKE VBKOK.
DATA : I_VBPOK LIKE VBPOK OCCURS 0 WITH HEADER LINE.
DATA : I_PROT LIKE PROTT OCCURS 0 WITH HEADER LINE.
clear vbfa.
START-OF-SELECTION.
WA_VBKOK-VBELN_VL = '0080882358'.
SELECT SINGLE * FROM VBFA WHERE VBELN = WA_VBKOK-VBELN_VL.
IF SY-SUBRC = 0.
WA_VBKOK-VBELN = VBFA-VBELV.                    " Sales and distribution document
ENDIF.
Fill the item level
I_VBPOK-VBELN_VL = '0080882358'.
I_VBPOK-POSNR_VL = '900001'.
SELECT SINGLE * FROM VBFA WHERE VBELN = I_VBPOK-VBELN_VL AND
                                  POSNN = I_VBPOK-POSNR_VL.
IF SY-SUBRC = 0.
    I_VBPOK-VBELN = VBFA-VBELV.                   " Sales and distribution document
    I_VBPOK-POSNN = VBFA-POSNV.                   " Item of an SD document
    I_VBPOK-VBTYP_N = VBFA-VBTYP_N.                 " Document category
ENDIF.
I_VBPOK-MATNR = '9692A\260'.
I_VBPOK-CHARG = '0000010669'.
I_VBPOK-PIKMG = '1.0'.
APPEND I_VBPOK.
CALL FUNCTION 'SD_DELIVERY_UPDATE_PICKING'
EXPORTING
VBKOK_WA = WA_VBKOK
SYNCHRON = 'X'
NO_MESSAGES_UPDATE = SPACE
NICHT_SPERREN = ' '
AUFRUFER_T = ' '
IF_ERROR_MESSAGES_SEND = 'X'
TABLES
VBPOK_TAB = I_VBPOK
PROT = I_PROT
if sy-subrc = 0.
      COMMIT WORK.
    WRITE:/ 'success'.
else.
write:/ 'not success'.
endif.
It is working fine in updating a delivery with 10 qty for only 8 picking but later when i am using it for the rest i.e., 2 picking qty, it is not working.
Could please hepl me with this.
Thanks

How to pass multiple MDX values for a single parameter into a drill-through report?

I'm thinking this will be an easy question for any experienced SSRS/MDX developers, at least I hope so! I've created a report that gives the user the option to choose viewing data for the current/active week, or YTD. Depending on which link the
user selects, the report simply calls itself and needs to pass in the parameter value for Active week. If it's active week, the parameter value will simply be "true". If it's YTD, the parameter value needs to be both "True" and "False" so the current
week's data is accounted for as well. I've set everything up except for the final step, and I have no idea what to type into the Value field below. I've tried different things: false, as you see below (it errors saying I'm missing the parameter
value), the value in MDX format: =[School Dates].[Active Week].&[True] (it said I was missing a bracket), a 1 instead of the word true (again, missing a parameter value). Nothing is working.
So my question is kindof two-fold: 1) how do you pass in the value at all and 2) more specifically, how do you pass in multiple values (both true & false) ??

I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
To answer your initial questions, you are correct with both your assumptions:
1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
So in following your instructions, well that's the problem I'm not quite following :)
1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden? If so, I've done this.
2) I'm not quite sure where to use the statement you provided me. You said to put it in the dataset, but I don't know which dataset. I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
as a parameter). If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties. I tried this, and it did not generate any errors, but it also kept my report groups from displaying
-- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there. When I did this and ran the report, I would get the following error:
The 'SchoolDaysActiveWeek' parameter is missing a value
So what am I missing!?
Also, thanks for taking the time to respond!!

How to change the pick quantity in outbound delivery using bapi

Hi,
I am using BAPI_OUTB_DELIVERY_CHANGE for changing the outbound delivery picking quantity but there is no field to change the pick quantity.
plas advice any BAPI to change pick quantity
Regards,
Krishna

Krishna....have a look in the below threads where there was a similar requirement..
error while using BAPI_OUTB_DELIVERY_CHANGE
change outbound delivery

How to pass session variable value with GO URL to override session value

Hi Gurus,
We have below requirement.Please help us at the earliest.
How to pass session variable value with GO URL to override session value. ( It is not working after making changes to authentication xml file session init block creation as explained by oracle (Bug No14372679 : which they claim it is fixed in 1.7 version Ref No :Bug 14372679 : REQUEST VARIABLE NOT OVERRIDING SESSION VARIABLE RUNNING THRU A GO URL )
Please provide step by step solution.No vague answers.
I followed below steps mentioned.
RPD:
****-> Created a session variable called STATUS
-> Create Session Init block called Init_Status with SQL
select 'ACTIVE' from dual;
-> Assigned the session variable STATUS to Init block Init_Status
authenticationschemas.xml:
Added
<RequestVariable source="url" type="informational"
nameInSource="RE_CODE" biVariableName="NQ_SESSION.STATUS"/>
Report
Edit column "Contract Status" and added session variable as
VALUEOF(NQ_SESSION.STATUS)
URL:
http://localhost:9704/analytics/saw.dll?PortalGo&Action=prompt&path=%2Fshared%2FQAV%2FTest_Report_By%20Contract%20Status&RE_CODE='EXPIRED'
Issue:
When I run the URL above with parameter EXPIRED, the report still shows for ACTIVE only. The URL is not making any difference with report.
Report is picking the default value from RPD session variable init query.
could you please let me know if I am missing something.

Hi,
Check those links might help you.
Integrating Oracle OBIEE Content using GO URL
How to set session variables using url variables | OBIEE Blog
OBIEE 10G - How to set a request/session variable using the Saw Url (Go/Dashboard) | GerardNico.com (BI, OBIEE, O…
Thanks,
Satya

How can i pass the one value for two bind parameters

hi All,
i have a search Query
select Distinct CONSOLIDATION_SUMMARY_ID,CREATION_DATE,CREATED_BY,BATCH_ID,PROCESS_FLAG,ERROR_MESSAGE,CUSTOMER_ID,BILLING_FREQUENCY
,CONSOLIDATION_LEVEL,SOLD_TO_ORG_ID ,SHIP_TO_ORG_ID ,TRANSACTIONAL_CURR_CODE ,INVOICE_TO_ORG_ID ,PRICE_LIST_ID
,ORIG_SYS_DOCUMENT_REF,INVENTORY_ITEM_ID ,ORGANIZATION_ID ,ORDERED_ITEM ,ORDERED_QUANTITY ,UNIT_LIST_PRICE
,UNIT_SEELING_PRICE,ORDER_QUANTITY_UOM,ORDER_NUMBER ,ORDER_DATE ,INVOICE_NUMBER ,INVOICE_DATE
,FEE_CALCULATION_WORKSHEET_PDF ,TRADE_DETAILS_PDF ,INVOICE_REPORT_PDF ,PRICING_ATTRIBUTE_CONTEXT
,PRICING_ATTRIBUTE ,PRICING_ATTR_VALUE_FROM
from xxcurrnx.xxcur_trade_consol_summary XXSTR
WHERE XXSTR.BATCH_ID=NVL(:1,XXSTR.BATCH_ID)
and XXSTR.CUSTOMER_ID=nvl(:2,XXSTR.CUSTOMER_ID)
But i need to pass only one value to this query: throw the below code
public void passTocusttrxn(String vcustid)
System.out.println("The customer id in trxn vo:"+vcustid);
XxcurtradeconsummaryVOImpl vOrdnumb=getXxcurtradeconsummaryVO1();
vOrdnumb.setWhereClauseParam(0,vcustid);
vOrdnumb.setWhereClauseParam(1,null);
vOrdnumb.executeQuery();
System.out.println("The executed query After is :"+vOrdnumb.getQuery());
But it throws the below exception.
java.sql.SQLException: Missing IN or OUT parameter at index:: 1
could you please tell me how can i achieve this.
Thanks,

hi Meher,
i need to pass this value throug the Spell Parameter.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
XxcustdtlsmainAMImpl am=(XxcustdtlsmainAMImpl)pageContext.getApplicationModule(webBean);
if(pageContext.getParameter("PCustID")!=null) // PCustID is the Spell parameter here
if(pageContext.getParameter("PbtchID")!=null)
if(pageContext.getParameter("PordNum")!=null)
String vcustID=pageContext.getParameter("PCustID");
String vOrdNum=pageContext.getParameter("PordNum");
System.out.println("The cust id in PR:"+vcustID);
System.out.println("The cust id in PR:"+vOrdNum);
am.passTocustlinetrxn(vcustID);
how this vcustID value will passed to the search Code.
if(pageContext.getParameter("BatchID")!=null && !pageContext.getParameter("BatchID").equals(""))
String BchID=pageContext.getParameter("BatchID");
int vInBtchID=Integer.parseInt(BchID);
srchVO.setWhereClauseParams(null);
srchVO.setWhereClauseParam(0,vInBtchID);
System.out.println("The Batch ID is :"+vInBtchID);
f=1;
}else
srchVO.setWhereClauseParam(0,null);
if(pageContext.getParameter("CustmeCode")!=null && !pageContext.getParameter("CustmeCode").equals(""))
System.out.println("i am im customer code ");
String vCustID=pageContext.getParameter("CustmeCode");
srchVO.setWhereClauseParams(null);
srchVO.setWhereClauseParam(1,vCustID);
System.out.println("The customer code is "+vCustID);
f=1;
}else
srchVO.setWhereClauseParam(1,null);
if(f==1)
srchVO.executeQuery();
Regards,

Passing multiple integer values as parameter in SSRS

Hello,
I am trying to pass a comma separated multiple integer value parameter in SSRS report and it errors out complaining that it is not able to convert the nvarchar value to datatype int. But it works fine when I pass a single value. Here is the code I am using
for the report and I am stuck at passing multiple values.
SELECT
id,count(*) as cnt
from table
and ID in (@id) group by id
eg: if I pass 10,20,30 then I would get error however if I pass 10 then it works fine
Is there a different method to pass multiple integer values?
Thanks for your help.

A comma is, of course, a textual character and not an integer, thus the error you are getting. Multi-value parameters can be used for this.
Select "Allow multiple values"and set data type to Integer. Multi-value parameters deliver the values as an array. The query interface is smart enough to convert them to the proper syntax (comma-delimited) automatically so a statement like:
WHERE Field IN (@id)
where the parameter has an array of values {1, 2, and 3} is interpreted as:
WHERE Field IN (1,2,3)
You do not need to manually convert it in a transact SQL query. That is not the case for displaying the value array in your report. If you wish to display the array (described above) in your report as "1, 2, 3", you will need to use a join expression:
=Join(@id, ", ")
As DJ described, the other part to a multivalue parameter is the Available values. These can be set explicitly but given your example, I think it would be best to create a new dataset that retrieves a distinct list of the IDs that can be retrieved, perhaps
something like:
SELECT DISTINCT GroupName, GroupID
FROM table
WHERE [criteria]
Set the available values to use this query with GroupName (or whatever user-friendly field you choose for your dataset) as the label and the id as the value. The label field should be something the the target report user can easily identify the correct group
using.
If you don't want to or can't use a multivalue parameter for some reason then you will need to manipulate your parameter value prior to consuming it in your query. When you add the parameter to the TSql query and save the dataset, SSRS adds it to the Parameters
property of the dataset. Open the dataset properties and select the parameters tab. You should see your parameter in the list. click the expression builder (fx) button next to the value and enter this expression:
=Split(@id,",")
Note that the second element of the expression is the delimiter. If your text input has comma-space as a delimiter (1, 2, 3 vs 1,2,3) then that element must include ", ". My example just has comma so if you use that with a string "1, 2, 3"then
the resulting array will still have 3 elements but the 2nd and 3rd elements of the array will have a preceding space which will cause your dataset to error with the same error. As long as there are no non-numeric characters in any of the elements, the split6
will create the text array, SSRS will dynamically generate the correct "IN"syntax (comma separated) and SQL will convert the elements from VARCHAR to INT on the fly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

Where to pass picking quantity value in BAPI_OUTB_DELIVERY_CREATENOREF

Similar Messages

Maybe you are looking for