Which BAPI is using in BUS1012/CRETAE FROM DATA1
Hi Experts,
1) Pls. let me know that, Which BAPI is using in the following object,
BO: BUS1012
Method - CREATEFROMDATA1
Message Type - PORDCR1
Basic Type - PORDCR101.
2 ) Can I use the same BAPI to create a REPORT prog., for the purpose of uploading my_purchase_orders_internal_table OR is there any complications?
3) Or Wht is the tx code to see the METHODS?
thanq
Edited by: Srinivas on Feb 20, 2008 10:22 AM
answered in other thread
Similar Messages
-
Which CKM is used for moving data from Oracle to delimited file ?
Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH -
US W4 form in MSS, which BAPIs to use?
hi,
I am building adobe interactive form for W4. In our scenario manager will use this form to input W4 information for NEW-HIRE. manger will use the new-hire's employee number to pre-populate some of the data on W4 form and inputs the rest of the data.
I was wondering if I can get help on which BAPIs to use.
1) To read employee information - firstname, lastname, ssn based on employee number
2) To save W4 information based on employee number
thanks,
SankethGot it BAPI_W4W5INFOUS_CREATE.
thanks -
Which BAPI to use for GR for PO reversal (mvt 102)?
I'm trying for look for a BAPI that can used to post GR for PO reversal, which is mvt 102. I try to use BAPI_GOODSMVT_CREATE to do it, but I encounter errors, I have tried different set of parameters, but all are not sucessful. Below is the few set of parameters that I tried:
1)
goodsmvt_code-gm_code = '06' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date = sy-datum.
goodsmvt_item-stge_loc = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item = v_poline.
goodsmvt_item-move_type = '101'.
goodsmvt_item-entry_qnt = v_qty.
goodsmvt_item-XSTOB = 'X'.
Error message: Goods movement not possible with mvmt type 102
2)
goodsmvt_code-gm_code = '06' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date = sy-datum.
goodsmvt_item-stge_loc = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item = v_poline.
goodsmvt_item-move_type = '102'.
goodsmvt_item-entry_qnt = v_qty.
Error message: Goods movement not possible with mvmt type 102
3)
goodsmvt_code-gm_code = '01' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date = sy-datum.
goodsmvt_item-stge_loc = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item = v_poline.
goodsmvt_item-move_type = '102'.
goodsmvt_item-entry_qnt = v_qty.
goodsmvt_item-mvt_ind = 'B'.
Error Message: No goods receipt possible for purchase order 5000000017 00001
Does anybody knows the correct parameters for mvt 102? Or I'm using the wrong BAPI ? Please kindly help.Hi,
the basic thing i guess is first you have reverse the PGI done in may now at the current date as the periods would have been closed for the previous months. And if it is in production then you cannot do a posting in a previous month just because, you would be forced to open the previos periods causing inconsitency in the chronology. But however there is a possibility of allowing posting in previous periods also by using MMRV. Pl try. but make sure it is acceptable for the business and does nt affect any other areas. But it might just do so.
Use T.code VL09 or use BAPI_GOODSMVT_CANCEL
refer the link
https://forums.sdn.sap.com/click.jspa?searchID=3586093&messageID=3598826
Regards -
Help me which JNDIFactory to use to access EJB from a java class of JAR
I am confused in understanding the different JNDI factories
RMIInitialContextFactory, ApplicationInitialContextFactory and ApplicationClientInitialContextFactory
And the different namespaces like global, container local and component local.
Especially is there any relationship between the JNDI factories and the namespaces?
Or are they related to the deployment descriptors.
Because in application specific deployment descriptors (orion-ejb-jar.xml), we just map the JNDI location with the object (or its reference from ejb-jar.xml). We dont specify it can be accessed from this factory or that.
Shall we access an EJB from using any JNDI factory?
Specifically, I am stuck with what Factory to use to access an EJB from a Java class in a library (jar). The JAR is packaged with the EAR which contains the EJB Jar that I am trying to access.
THANK YOUEd,
As Robin said, I think you need code similar to this:
Context c = new InitialContext();
Object o = c.lookup("java:comp/env/Name");where Name is the name of your EJB as it appears in the "ejb-jar.xml"
deployment descriptor XML file.
Good Luck,
Avi. -
Which adapter to use to download data from site dynamically except file typ
hi,
I am to download data dynamically from a secure website to PI server without using file/FTP adapter and send it to any folder using PI.
(At receiver end i will use file adapter , Please suggest for sender side)
I will give user name and password to that site through PI.
Which adapter I should use at sender side?
At the same time I am to call an predefined RFC to trigger a Function module in SAP system.
How to do that?
Please help me out.
Response will be appreciated..
Thanks,
JaideepHi
add "&sap-client=<client>&sap-user=<loginId>&sap-password=<password>" to your wsdl
like http://server:8000/sap/bc/srt/rfc/sap/webservice _ name?wsdl&sap-client=100&sap-user=andre&sap-password=123456
Regard's
Chetan Ahuja -
Which kalman filtering use to reduce noise from accelerometr?
Hi I am going to measure velocity use accelerometr form A&D. It is adxl345. I conected my uC with adxl345 by SPI. Data from accelerometr are sending to my computer by the RS232. I get this data but sometimes i get wrong data. It is probably noise. I would like reduce it by the kalman filtering. Could I use Kalman filtering with only signal form accelerometr? Which Kalman Vii (whoes are in labview 2010) i must use? If t is possible filtering data without other signal for example from gyroscope? Now I get acceleration data, there are no integrate yet. Below i send print screen with my data output presentatnion on the graph. You can see there some unexpected peak. What is this? If Kalman filtering help me? If yes which Kalman block from Labview I must use. Heeeeeelp me please.
Greating from Poland
Attachments:
przypadkowe dane.png 80 KBProbably no one answered because no one was sure what you wanted. In the image you posted what is the correct signal and what is the undesired part? The time scales are different, the numbers of peaks is different, and the peak shapes may be different.
Before attempting to filter the data, it is usually a good idea to determine the cause and the nature of the interfering signal. The more you know about the "noise," the more likely you will be able to select a processing method to eliminate it. Is the noise random? Does it correlate with some mechanical behavior of the system? With what kind of distribution? What is the amplitude range of the desired signal? What is the amplitude of the normal background noise? What is the amplitude range of the interfering signal? What is the frequency distribution of these signals?
Lynn -
Can I change which fields are used to print envelopes from contacts in OSx Mountain Lion
I would like to alter the way a contact appears on an envelope I print from contacts. For example: if my contact is "Bob Abbott" how can I have the envelope print addressed to "The Abbott Family". Thanks
I used the Department field in my Address Book for the "The Abbott Family" and "Mr. & Mrs. John Jones" variations. I chose Department from the available fields, since it was unused by me. Then I used the Department field instead of the First Name, Last Name, etc. fields in the merge.
-
Which BAPI to use for Quotation?
I found 2 FM in SAP.
BAPI_QUOTATION_CREATEFROMDATA and BAPI_QUOTATION_CREATEFROMDATA2.
Which is the latest and which is a better option for me?
I find BAPI BAPI_QUOTATION_CREATEFROMDATA is simplier.
Can someone advice.
Thanks
Bye
ColinI
Hi Colin
BAPI_QUOTATION_CREATEFROMDATA its easy to give few input parameters required while quotation creation
MPORTING
*" VALUE(ORDER_HEADER_IN) LIKE BAPISDHEAD
*" STRUCTURE BAPISDHEAD
*" VALUE(WITHOUT_COMMIT) LIKE BAPI_STAND-NO_COMMIT
*" DEFAULT SPACE
*" VALUE(CONVERT_PARVW_AUART) LIKE BAPIFLAG-BAPIFLAG
*" DEFAULT SPACE
*" EXPORTING
*" VALUE(SALESDOCUMENT) LIKE BAPIVBELN-VBELN
*" VALUE(SOLD_TO_PARTY) LIKE BAPISOLDTO
*" STRUCTURE BAPISOLDTO
*" VALUE(SHIP_TO_PARTY) LIKE BAPISHIPTO
*" STRUCTURE BAPISHIPTO
*" VALUE(BILLING_PARTY) LIKE BAPIPAYER
*" STRUCTURE BAPIPAYER
*" VALUE(RETURN) LIKE BAPIRETURN1 STRUCTURE BAPIRETURN
And wher as BAPI_QUOTATION_CREATEFROMDATA2 More input parameters required to create quotation with new release
IMPORTING
*" VALUE(SALESDOCUMENTIN) LIKE BAPIVBELN-VBELN OPTIONAL
*" VALUE(QUOTATION_HEADER_IN) LIKE BAPISDHD1 STRUCTURE BAPISDHD1
*" VALUE(QUOTATION_HEADER_INX) LIKE BAPISDHD1X STRUCTURE
*" BAPISDHD1X OPTIONAL
*" VALUE(SENDER) LIKE BAPI_SENDER STRUCTURE BAPI_SENDER OPTIONAL
*" VALUE(BINARY_RELATIONSHIPTYPE) LIKE BAPIRELTYPE-RELTYPE DEFAULT
*" SPACE
*" VALUE(INT_NUMBER_ASSIGNMENT) LIKE BAPIFLAG-BAPIFLAG DEFAULT
*" SPACE
*" VALUE(BEHAVE_WHEN_ERROR) LIKE BAPIFLAG-BAPIFLAG DEFAULT SPACE
*" VALUE(LOGIC_SWITCH) LIKE BAPISDLS STRUCTURE BAPISDLS OPTIONAL
*" VALUE(TESTRUN) LIKE BAPIFLAG-BAPIFLAG OPTIONAL
*" VALUE(CONVERT) LIKE BAPIFLAG-BAPIFLAG DEFAULT SPAC
Regards,
Seegal -
Which BAPI and how to use it in order to modify results
Hello,
I need to enter the results of an Inspection Lot using an external program.
Below is a screenshot of QA32:
- The round circles show what I know;
- The arrow shows what I wish to modify;
I would appreciate some help on the following topics:
- Which BAPI to use;
- How to fill the BAPI;
- Does the BAPI need BAPI_TRANSACTION_COMMIT after?
Thanks in advance for your help.
Regards,
JoãoHi,
Not certain what your external system is, but it may be worthwhile to go through the QM-IDI documentation to see if that meets your requirements
http://help.sap.com/saphelp_erp60_sp/helpdata/en/26/b43927506511d182c20000e829fbfe/frameset.htm
Alternately, take a look at BAPI_INSPOPER_GETDETAIL to determine how the lot expects to receive results, and BAPI_INSPOPER_RECORDRESULTS to set the results accordingly
Regards,
JL -
ERROR while getting BAPI list using JCo Action
Hi,
We are using MII 14. I have created JCo connection and also configured connection alias.
I am using this two in JCo interface action just to test whether the connection is working fine.
But I am getting "No RFC authorization for function module RFC_GET_FUNCTION_INTERFACE" when i search for BAPI_*.
Can you please guide on , what priviliges user which we will use to connect ERP from MII , should have ?
ThanksI do not know the specific Role or Permission required. It might be in the help documentation,b ut the security folks should be able to figure it out from the error message. Someone else may know the exact Role or Roles needed.
The ID you are using does not have external access to the RFC pool, but you should also provide which RFCs you are planning to use as some have additional permissions required.
Regards, Mike
SAP Customer Experience Group - CEG -
Bapi is used to 'post incoming payments (t-code F-28)'
hi all
can any one tell which bapi is used to 'post incoming payments (t-code F-28)'.
thanks in advance,
lokeshHi
Try 'BAPI_ACC_GL_POSTING_POST' and fill the parameters correctly.Contact ur functional to fill it correctly.
That will work.
If helpful give me points.
Regards
Manas Ranjan Panda -
BAPI for updating records in usobt_c from internal table
Can anyone help in implementing this functionality or suggest me which BAPI to use.
Can anyone help in implementing this functionality or suggest me which BAPI to use.
-
Performace Which is better ? : Bapi inside a loop OR Select from Tables
Hi Gurus,
I have a report which displays purchase info records.
If I am selecting from tables i need to use EINA, EINE, EORD and some other tables.
There is a BAPI which gets all purchase info records specific to a vendor , material , purchasing organisation.
QUESTION: Performace wise which is the better Approach, either selecting from tables or BAPI for Purchase info records
Regards
Avi.Whether it using BAPI or select. you need to check the performance. If you have full key for these tables EINA, EINE, EORD then mak a select outside of the loop and within loop use READ TABLE statement with binary search. of if you want multiple records within loop then use loop insdie loop.
Your final objective is to minimise the database hits . If you use bapi inside loop then your database hits will be more
select from EINA
select from EINE
select from EORD
loop at itab,
read table EINA
read table EINE
read table EORD
endloop
a® -
Please tell me for BAPI which adapter is used
Hi friends this is shalini, for BAPI's which adapter is used
i think RFC adapter is used it is correct or wrong.
please tell me friends.
Regards
Shalini shahShah,
Check this weblog for one of the integration on this:
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
Regards,
---Satish
Maybe you are looking for
-
How do I authorize a computer to download iTunes files?
I bought this new Macbook ( my previous one has been stolen ), but I can't download my purchased items from iTune store. There's a message that says I need to authorize this computer to do so. How do I do it?
-
I may have totally screwed myself but...after installing Yosemite without checking for potential problems with Adobe software, my CS4 Design Premium suite wouldn't open. So after consulting some forums, I deinstalled it, but I only have disks for my
-
Playback in audition suddenly starting to skip and stutter?
I'm using a us 122l and have had no issues with it all, even after somebody accidentally dropped a glass of water onto it a few months back. But last night when I was recording a song, just like I have been for the past year and a half, the program s
-
Doubt in Selection-Screen for Program type "Function Group"
Hi Gurus, I created a Function group in that i created one screen and writtem the Screen flow logic. In that screen I called a Function module "COMPLEX_SELECTIONS_DIALOG" For Creating a selection-Screen. The code snippet is like below. CASE ok_code .
-
how do i control my apple tv with my new macbook. i want to be able to select a song from my macbook and have it play on my apple tv. any help? seems like it should be simple but i drink alot.