Which forum i select for access the hardware through ports

please guide me in which forum i post the questions about javax.comm
to use the ports to control the hardware
thanks

Pick any one you like. Doesn't matter much anyway, nowadays we even have to answer JBuilder questions here.

Similar Messages

SO Pricing User Exit - How to know which item is selected for re-pricing.

Hello Experts,
I have to modify material data when user does a update pricing in VA02, the problem is...How do I know which item is selected for re-pricing (in MV45AFZZ)? I am using user exit USEREXIT_PRICING_PREPARE_TKOMP.
For Ex: If my order has 3 items and 2nd one is selected and then 'Update' is done on 'conditions' tab. Above pricing user exit is triggered 3 times for all items, so I cant check XVBAP.
Your help will be appreciated.
Thanks,
Sagar

Hi J@Y,
Thanks for reply. But USEREXIT_PRICING_PREPARE_TKOMP is triggered for all items, so how do I know which is current item?
If you see in debug mode, xvbap-posnr and tkomp-kposn will have 10,20,30 everytime (for 3 times). How do I know if user has selected 20?
Thanks,
Sagar

What are the Jar files required,that for accessing the Type 4 Drivers.

what are the Jar files required,that for accessing the Type 4 Drivers.
Regards,

Well it is Database Specific.
Howevr there are few 3rd party .jar (Derby) which you can use it for accesing some standard databases.

How can I make "No Proxy" the default for accessing the internet?

How can I make "No Proxy" the default for accessing the internet?

*Tools > Options > Advanced > Network : Connection > Settings
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Help in finding API's for accessing system hardware

Dear All
I want to download Java API's for accessing system hardware.
I want to access the IP addresses and hardware accessories information on LAN through a server.
Please do help

for java to be portable it cannot have access to system specific functionality, what you need to do if you insist on using java is to uses native methods then implement those methods in C++ or C
class Nativemeth {
native int someSytemfunc(String []data)//declare native method
static{
System.LoadLibrary("somelibrarywhereimplementedthenativecode")
public static void main(String[] args)
int ret = someSystemfunc(new String("somedata");
you would then compile this using javah
to produce the C header files , the write the native code in your fav
compiler that can produce dll's assumn u are using a wintel platform
eg VIsual C++ , or Borland C++
REMEMBER YOUR CODE LOSESES ITS PORTABILITY
if all you want to do is access the IP address the uses the InetAdreess
class the Runtime class also has methods for detecting the amount of memory on a system.
if you have any queries e-mail : [email protected]

URL for accessing the web shop in crm2007

Hi all,
Please help me access the web shop which i created recently.
What is the standard URL in CRM 2007 for accessing the web shop in b2c scenario?
Regards
Apoorva Asthana

Hi
If RFC for TREX is working fine and catalog replication log shows successful, clear TREX cache bfore logon to shop.
Step1: http://<ip>:<port>/b2b/admin/index.jsp
Step2: Application Cache Statistics
Step3: TREXNameServerCache
Step4: Clear
Step5: Logon to shop
Note: if you want to see the replicated product catalog data use report TREX_RFC_AE_EXAMPLE
Regards,
Pavan

When I go through the 'import favorites' from Internet Explorer, everything seems to progress correctly. However, when I click on Bokkmarks, there is no option in the menu for accessing the imported items form EI. Is there a fix for this?

When I go through the 'import favorites' from Internet Explorer, everything seems to progress correctly. However, when I click on Bokkmarks, there is no option in the menu for accessing the imported items form EI. Why would this option be missing and is there a fix for this?

Hello Nigel.
Are you sure the Bookmarks you important are nowhere to be found? They should be stored in your bookmark manager, somewhere. To access the bookmark manager, go into ''Bookmarks > Organize Bookmarks...''. Try searching there.
You can change their place from there too.

How do I access the hardware test, How do I access the hardware test

08 MacBook with newest Lion. Is there a startup that allows me to access the Hardware test? Don't have disks with me.kk

Command D will do nothing. Option d will load the Internet version of AHT but that will not work on a 2008 MacBook.
Booting while holding the d key is not likely to work either, since Lion tended to erase AHT on the boot volume.
AHT must be run from your Mac's original Applications Install DVD. It can also be reinstalled on the boot volume, if desired.

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

Unable to access the Firewall through ASDM

                   Hi All,
Thanks in advance ,
in my organisatin we are facing one issue with launching of ASDM in ASA 5520 , when wer are trying to access the Firewall through ASDM we are unable to access that , see the java error loggs below , yes i know if we reload the firewall then this problem will solve , but my organisation management donsent want to reload the firewall , other procedure is to upgrage the ASDM version , just let me know the procedure for this
Using JRE version 1.7.0_25 Java HotSpot(TM) Client VM
User home directory = C:\Users\shussain
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
q:   hide console
s:   dump system properties
ASDM Application Logging Started at Tue Aug 20 11:04:48 AST 2013
Local Launcher Version = 1.5.30
Local Launcher Version Display = 1.5(30)
OK button clicked
Trying for ASDM Version file; url =
https://192.168.50.2/admin/
Server Version = 6.1(3)
Server Launcher Version = 1.5.30, size = 319488 bytes
invoking SGZ Loader..
Cache location = C:/Users/shussain/.asdm/cache
Exception in thread "SGZ Loader: launchSgzApplet" java.lang.NumberFormatException: For input string: "1 year 192"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at com.cisco.pdm.Check.h(DashoA10*..:1358)
at com.cisco.pdm.Check.c(DashoA10*..:858)
at com.cisco.pdm.Check.a(DashoA10*..:438)
at com.cisco.pdm.PDMApplet.start(DashoA10*..:132)
at com.cisco.nm.dice.loader.r.run(DashoA19*..:410)

dear marvin,
find my firewall sh version output, and asdm version ,
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 1 year 193 days
Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 0021.a09a.ba76, irq 9
1: Ext: GigabitEthernet0/1 : address is 0021.a09a.ba77, irq 9
2: Ext: GigabitEthernet0/2 : address is 0021.a09a.ba78, irq 9
3: Ext: GigabitEthernet0/3 : address is 0021.a09a.ba79, irq 9
4: Ext: Management0/0       : address is 0021.a09a.ba7a, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs                : 150
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Disabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 750
WebVPN Peers                 : 2
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1304L0HA
Running Activation Key: 0x0313c076 0x58bdf52e 0xa83245ac 0xb460b058 0x88201caa
Configuration register is 0x1
Configuration last modified by enable_15 at 10:18:47.850 AST Wed Aug 21 2013
ciscoasa#
ciscoasa# sh run asdm
asdm image disk0:/asdm-613.bin
asdm location internal-network1 255.255.0.0 internal

Why can't I access the internet through Firefox?

I can't access the internet through Firefox. It's worked just fine for several years, but it just randomly quit working. I've tried resetting Firefox, uninstalling an reinstalling it, and allowing Firefox through the firewall.

Did you try to remove the current rules for Firefox in the firewall to make ure to create new rules for the current Firefox release?
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

My iMessage screen is locked horizontally and will not rotate. When I access the camera through iMessage it will not rotate either. Any help with this will be very much appreciated.

My iMessage screen is locked horizontally and will not rotate. When I access the camera through iMessage it will not rotate either. Any help with this will be very much appreciated.

Hi MikeyGway,
If you are having rotation issues on your iPad, you may find the following articles helpful:
iOS: Screen does not rotate
http://support.apple.com/kb/ts3805
iPad: Understanding the side switch
http://support.apple.com/kb/HT4085
Regards,
- Brenden

Hello I can not access my account through MacBook Pro solution knowing I access the account through iTunes and iPad please help

Hello I can not access my account through MacBook Pro solution knowing I access the account through iTunes and iPad please helpfile://localhost/Users/mhmd/Desktop/%E2%80%8Fلقطة%20الشاشة%20٢%D9%A0١٢-١٢-٢ ١%20في%20٥%E2%80%8E.١٦%E2%80%8E.٤٢%20ص.pngfile://localhost/Users/mhmd/Desktop/%E 2%80%8Fلقطة%20الشاشة%20٢%D9%A0١٢-١٢-٢١%20في%20٥%E2%80%8E.%D9%A0٩%E2%80%8E.٤١%20ص .png

Ummm...
Can you explain in details what happens when you try?

I can not access the switch through the console (solved)

Hello,
I'm having a problem.
I can not access the switch through the console. The web interface is working properly.
Model: SRW224g4
Below some pictures.
The HyperTerminal settings
error:
If anyone can help me?
Thank you and excuse the bad English.

Hello Rumenigue,
It looks to me like you are using a console cable. The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself.
Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
Hope I have helped,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

Which forum i select for access the hardware through ports

Similar Messages

Maybe you are looking for