Which screen !! Help!!
About to order a new 15" macBook Pro. However I cannot make up my mind regarding which screen to order:
MBP 15" HR Glossy WS Display
or
MBP 15" HR AntiGlare WS Display
Any reasons for one over the other?
Thanks
Glossy; richer colors, great for watching DVDs, much glare, not good for outdoor use or in bright light environment,
Anti glare; Screen not as brilliant, better for outdoor or bright light environments, more accurate color representation (per photographers).
The first MBP I bought had a glossy display and I liked and still do, but there are limitations where you can effectively use it. The second one (the current one), after much consternation, I chose an Antiglare. Initially I did miss the glossy look but I have adjusted to it. The fact is, it simply is more practical and the display is still pretty good. My next MBP will be an Antiglare.
Best thing to do is to go to an Apple store and view them side by side. After all this is your decision.
Ciao.
Similar Messages
-
i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me
If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Providing on-screen help in flash RIA application
Dear Friends,
I have a requirement to implement a feature like providing on-screen help related to the panel/control/form(which helps the use who is using my application) i loaded in the browser.
Any idea or any direction is appreciated.
Regards,
Prakash.Hi nikos,
Thanks for your reply. which file format i have to use so that the team who is creating help, can give me that file format. and i can access. usually .hlp file is using for standalone project. for web which file format is best to fetch help details.
The senario is, if i press F1 on textbox, it should give me a help from the help document and produce information about that field entry.
I am using flash builder to develop my application.
Please give me any idea..
Regards,
Prakash. -
Pavilion p6157c freezes at blue hp screen HELP
My desktop freezes at the blue hp screen on startup, any button I press that is shown on the screen (f10, esc, f9, f11) won't register or do anything. I am running windows 7 and have a pavilion p6157c desktop. This is very important to me and if anyone helps I will be greatful!!
Hello Bruddahshark,
I understand you state your computer will not bypass the blue HP screen, is that correct? I will be happy to help you.
Try turning the computer on and tap the F10 key immediately, and see if you are able to access the setup menu. When doing so the F10 key is sometimes very sensitive so if it fails the first time try it at least 2 more times.
If you are successful, toggle down to one of the drives you see below. One drive will be for your hard drive and the other will be for the DVD drive. Select the drive that does not mention DVD-RW. Once you have selected on the drive, select smart support, and then Smart Shot Test. The Short Test will last about 3-5 minutes, if that test passes then select Smart Extended test, now that test will take some time.
See the screenshot below for an example of what the screen should look like.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!
You may want to try this.
Solution A
Start up your MBP while pressing Option (alt)|, Command, P, R until your hear 3 chimes rather than 2 as indicated by apple. This worked for me the first time.
Solution B
Start your MBP while pressing Option (alt), Command, S
Hold until you see the computer automatic routine. When it finally stops type the following followed by "return":
fsck -fy
It will probably indicate some problem related to "pcscd.pub" (should be 16 instead of 17). I haven't figured out what this means but somewhere in the Internet i read it is related to scan cards...
More importantly this routine will fix any problems with your HDD similarily to disk repair. When it ends, it will tell you if it has fixed/modified anything. If it has, run the routine again by typing again "fsck -fy"
Lastly, reboot by typing "reboot" (followed by "return")
Solution C
Start up your MBP while pressing option (alt), command, S
hold keys until you see computer commands scrolling
when the routine stops type the following, each line followed by the "return" key:
mount -uw /
chmod 775 /
chmod 1775 /
reboot
After which your computer should reboot on it's own.
Each of the above has worked for me at one time or another. Once your computer has rebooted from the DVD you can reinstall OS X. If your problems started after installing 10.5.6, then I don't suggest updating until 10.5.5.
I'm very very disappointed with my 2007 MBP, it started to give me problems after 1 year. had to change the HDD and lately when I isntalled 10.5.6 it suddenly refused to start up., My previous Mac laptop (2003 866Mhz) worked for 4 years without a hitch. Ironically I've had to use it to access the internet and find solutions for my current MBP.
best of luck -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!
Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.
-
I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
please help.
will getting a new screen help? or is there an easier, less expensive way?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch 8th 3rd gen is stuck on the connect to iTunes screen and won't let me do anything and iTunes won't restore it or do anything because there is a password on it and I can't type it in on the touch since it's stuck on this screen help please I've tried doin the power and menu button to restart it and it goes right back to connect to iTunes someone please helpme
Try again placing the iPod in recovery mode. It can be tricky. The computer should say it discovered an iPod in recovery mode. Recovery mode bypasses the passcode (and erases the iPod). If not successful, try placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????
Might want to post your question in the correct forum. This is the iPHONE forum.
-
In which screen the Profit Center field can be seen in SAP CRM Product Master?
Hi SAP Experts,
Please provide your valuable inputs on the below request:
1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see?
2) At the moment we are not using the profit center field in either of the systems(ECC and SAP CRM) in Material, we want to use this then how to go ahead to have this field in CRM.
3) If we add the profit center value in material master in ECC under general and plant data view then how this value will be replicated into SAP CRM , delta load or initial load?
We are using SAP ECC 6.0 and SAP CRM 7.1 systems.
Appreciated for your inputs at the earliest.
Best Regards,
SVHi,
Substitution Rule :-
Prerequisite :
1. WBS Level (PRPS-STUFE) = ' 3 ' AND Statistical Indicator (PRPS-XSTAT) = ' X '
Substitute
1. Profit centre (PRPS-PRCTR) - ' '
Hope this will clear you...
Regards,
Hari -
Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?
Apple service centre employee told me that they do not have this 14 day offer in India.
And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
I feeling ridiculously bad. -
junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've adjusted all the settings under mail preferences, but that is not helping.
Hello Diane162,
Welcome to the Apple Support Communities!
I understand that you would like to be able to filter some of the junk mail that you are receiving in Mail. The attached article has a lot of great information on junk mail filtering, including how to mark as junk and adjust the junk filter.
Mail (Yosemite): Reduce junk mail in your inbox
Cheers,
Joe -
Can I choose which screen (page) apps download to on my iPad?
Is there a way to choose this, or does the iPad automatically decide? If it decides, how can I tell in advance which screen apps will download to?
I think starting from the second home screen, the new app will be placed in the first available space. If this is the case, you would be able to control the placement manually by making sure your landing screen has empty icon slots and all previous screens, with the exception of the first one, have all of the icon slots occupied. I did run across an app that seemed like it would allow the user to create placeholder icons on the home screens but I can not think of the keywords to pull it up now. There are several icon creators/enhancers that may do the same thing. You can use one of these apps or use the Safari button to Add to Home Screen, to fill up the screens. You could even use a folder to store and deploy your screen filler icons. It seems like it would be more trouble than it's worth but I do have my home screens assigned for different roles. Hopefully Apple will continue to refine the user interface.
-
I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson
Maybe you are looking for
-
When I want to change my desktop pattern, I no longer have access to my iPhoto as a choice. I am just given the Apple pictures and colors. I have OS 10.9.4 on a MacBook Pro. I could always choose any photo in my iPhoto for my desktop, but no longer.
-
How to get the owning bean given a java object
Hi, is there any way - for a just-created bean instance - to know on behalf of which bean this object has been created ? In other words, going back from the java object to the bean symbolic name, as described in a faces-config managed-bean chunk (jus
-
How to convert a number to duty cycle (FPGA)
Hi I want to convert a numerical number to a duty cycle value in FPGA module so I could use it to generate a PWM signal for the numerical value. I tried dividing it but it shows an error in FPGA as it would produce a float value. I tried even the exa
-
UME Roles/Groups problem I have installed an ABAP +J2EE instance with the view of using it for Adobe Document Services. While following the Adobe Document Services configuration guide, Step 3.2.1.1: I'm creating a role in the ABAP engine, creating a
-
Hi I'm having this issue since I upgraded to Mavericks where almost every time I put my computers to sleep I get the "Disk not ejected propoerly" message and every disk but the system one is not mounted and cannot be found by Disk Utility. I have a M