Which statement is used to move identically named fields between structures

hi
which statement is used to move identically named fields between structures

Hello Jyothsna,
We use
MOVE-CORRESPONDING STRU1 TO STRU2.
Example:
Data: begin of stru1,
f1,
f2,
f3,
end of stru1.
Data: begin of stru2,
f1,
f2,
f3,
end of stru2.
stru1-f1 = 'a'. stru1-f2 = 'b'. stru1-f3 = 'c'.
MOVE-CORRESPONDING STRU1 TO STRU2.
write: stru2-f1, stru2-f2, stru2-f3.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.

Similar Messages

Which frame is used for movie preview?

Which frame is used for a home movie preview, takin with an iPhone 4s? I guess the question is, is there a way to specify the frame of the movie which is used for the preview?
-Thanks

I would have a look at
Gallery
Demo or at the site of a friend of mine
http://www.schutte.name

Move cursor through fields in screen with ENTER like TAB

Hello experts !
I want to move the cursor between fields in a custom screen just like kay TAB do.
I have used command:
MOVE CURSOR TO FIELD mara-spart... but it doesnt work, Cursor remains in th first field..,
any help?
Thank you and regards,
Ibrahim Andres

For example, here is the exact code which is working in my system and has been for quite a while.
The screen flow logic.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1500.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1500.
The code for module status_1500.
* Module STATUS_1500 OUTPUT
module status_1500 output.
set pf-status 'STDCONSOLE'.
set titlebar '1500_07'.
 set cursor field cursorfield.
endmodule.
The PAI module USER_COMMAND_1500
* Module USER_COMMAND_1500 INPUT
module user_command_1500 input.
case sy-ucomm.
 when 'ENTER'.
* Scroll thru fields when user hits enter
 get cursor field cursorfield.
 case cursorfield.
 when 'P_TICNO'.
 cursorfield = 'P_PERNR'.
 when 'P_PERNR'.
 cursorfield = 'P_WERKS'.
 when 'P_WERKS'.
 cursorfield = 'P_LGORT'.
 when 'P_LGORT'.
 cursorfield = 'P_AREAC'.
 when 'P_AREAC'.
 cursorfield = 'P_TICNO'.
 endcase.
 endcase.
Here I'm using the same variable CURSORFIELD for setting/getting.
Regards,
Rich Heilman

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I use hd simplepass identity protection which works great with firefox 3.6 but firefox 4 does not recognize so i had to uninstall 4 and reinstall 3.6 what do i do to make simplepass work with firefox 4

I use hd simplepass identity protection which works great with firefox 3.6. I updated to firefox 4 and when I tried to use simplepass to log into my bookmarked account firefox gave an error message. I had to uninstall firefox 4 and reinstall 3.6 and now I am able to use simplepass again

The company that make the bioscanner for HP have abandoned it. For more details see https://support.mozilla.com/en-US/questions/799388

I've got a Mac Book Pro 17" 2008 with FCS 2. Compressor 3 only gives me MOV-1 which are no use so I've bought Compressor 4 from the App store: it says the graphic card is not compatible. Can I install a new card on my mbp? If so which is best? Thanks John

I've got a 17" Mac Book Pro with Snow Leopard and Final Cut Studio 2 . Compressor 3 is only giving MOV-1 which are no use to me. So I've bought Compressor 4 from the App store which it says isn't compatible with the graphics card on my 2008 mbp. Can I
Install a new graphics card on my computer if so which one? If not can I solve the MOV-1 problem ?
Thanks in anticipation
John Lawrence

Ask here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io

When I try to open my Yahoo mail in safari, I get a message which states:" In order to use Yahoo mail, please turn Private Browsing off. Please go to Settings Safari Private Browsing, and turn off" The problem is my ipad does not a Private Browsing switch

When I try to open my Yahoo mail in safari, I get a message which states:" In order to use Yahoo mail, please turn Private Browsing off. Please go to Settings>Safari>Private Browsing, and turn off" The problem is, my ipad does not a Private Browsing switchat this location.

With iOS 7 on the iPad, you turn Private Browsing on and off by tapping the URL field. The screen that opens up has your bookmarks on it. In the bottom left corner is a hot button marked 'PRIVATE'. Tap on the word 'PRIVATE' to turn private browsing on or off. Yeah, there aren't any instructions anywhere that I can find to do this, and if you follow Yahoo's instructions, they don't work. This doesn't happen with the previous Apple OS, and you can restore your iPad to the older OS.

Hello to tuti, what must I do to import into FCE mov video converter registered with Nikon D3100, which should I use? thanks from italy monza rudy

Hello , what must I do to import into FCE the mov video converter registered with Nikon D3100,
the timeline of the rendering is orange (fce)
which should I use?
thanks from italy monza rudy

rodolfofromconcorezzo wrote:
Hello , what must I do to import into FCE the mov video converter registered with Nikon D3100,
the timeline of the rendering is orange (fce)
which should I use?
thanks from italy monza rudy
I do not understand the part regarding importing the Registered Video Converter!!
Can you explain this in more detail please???
Al

Which statement would you use to confirm a transaction?

Which statement would you use to confirm a transaction?
a. COMMIT TRANSACTION
b. ROLLBACK TRANSACTION
c. CHECK TRANSACTION
d. VIEW TRANSACTION

a.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Anyone know which app to use to be able to watch Live Stat sports on the iPad?

Anyone know which app to use to be able to watch Live Stat sports on the iPad?

No, Safari (and iOS in general) doesn't support the flash add on. Never has. If the source doesn't have an app, you could try one of the flash enabled apps in the apps store: iSwifter and Puffin are two I've heard mentioned, but there are others.. They may or may not work with that particular site, and you will want ot rad the descriptions carefully. They essentially stream the flash content to a third server to convert and send back to you.

Problem in SCROLLING of TABLE CONTROL which is designed using WIZARD

Hello Friends ,
                          I have designed a entry screen by using table control with wizard. My table control layout has 11 rows. I have used all 3 facilities i.e. SCROLLING , INSERT/DELETE & SELECT/DESELECT by cheking ( ticking ) check boxes while designing table control with wizard.
Now i have 3 problems.
1> In my entry screen , if 11 entries are entered , they are displayed in entry screen and are saved correctly in DB.
     But when i copy a file of suppose 15 entries into entry screen then it displays only 11 entries in entry screen and after that if i click/move VERTICAL SCROLL BAR to see remaining/next 4 entries then it does not display 12th 13th 14th &15th entry in entry screen. So the problem is i am unable to display remaining/next 4 entries in entry screen & also to save them DB.
2> At the same time when i click/move VERTICAL SCROLL BAR to see remaining/next 4 entries then earlier 11 entries are disappeared/ get cleared from entry screen.
3> The FIRST PAGE, PREVIOUS PAGE , NEXT PAGE , LAST PAGE and INSERT , DELETE push buttons are dispalyed in my entry screen . But they are not working or doing their opertions on table control though there is system generated code for them written in module pool program and PBO & PAI OF SCREEN 100 on which table control is present.
   So eagerly waiting for POSITIVE replies & Correct solutions from all ABAP techies.
THANKS & REGARDS,
Ashish.

Hi friend,
                     I have visited the link u have given . But it is a report program .it is available in ABAPDOCU tcode.
ABAPDOCU----
>ABAP User Dialogs -
>Screens -
>Complex Screen Elements -
>Table Control with Scrolling .
It is a REPORT program. and not a module pool program. plz check this in ur link also.
REPORT demo_dynpro_tabcont_loop.    &
*SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.* -
> this statement is used only in report program and system does not allow us to use in module pool program.
Second thing here data is retrived from spfli table where as my data will be whatever enduser enters it may be 15 lines , may be 50 lines or may be 200 lines and it shold be displayed on entry screen before clicking SAVE or any other user action.
My main problem is that I am unable to enter more than 11 entries in my entry screen. I want dynaamic table. Mean whichever enteries are entered they should be displayed on entry screen as well as can be scrolled up & down before saving and get saved after clicking SAVE button. here table control design is not imp because entry data depends on table control layout rows & which has limit. It can not be extended beyond certain level. i think max will be 20 Or 25 rows in layout. How to make it dynamic so that we can get any no. of entries in entry screen hiich canbe scrolled up & down.
Anyways thanks for ur reply And send some other soln.
Thanks & regards,
Ashish

PSE9: Using File/Move; what happens with duplicate filenames

I have PSE9 on Win7.
I'd like to use File/Move to move a large number of images from one set of folders to a another location.
The new location would be a single folder.
I'm pretty confident that I have duplicate filenames. So the same filename exists in more than one
of my 'source' folders.
Using File/Move what is going to happen when I encounter these duplicates?
Thanks for any help or advice.

So I used a belt and supenders method of organization. Tags and folders.
Oh, how I hate that phrase. This has sent many people down the road of organizing two different ways, with a cost. You did twice as much work. And in my opinion, using two different ways to organize was totally unnecessary, and waste of effort.
But in all honesty I don't use a lot of the advanced features of PSE. So from time to time
Neither do I. But that is irrelevant to how your set things up so you can find your photos when you want them.
For my new downloads, I believe I will just put them all into a single 'My Pictures' folder.
Unless your version of PSE has more features than mine does, putting them into a single folder (without subfolders by capture date) is more work than using the default folder naming scheme, which is capture date! And it buys you nothing! There is absolutely no harm in using the default of putting photos in folders by capture date. Don't make extra work for yourself! Now if your version lets you put all your new photos into a single large folder ...
I read some web articles that gave me the impression that there might be another way to migrate rather
than Backup/Restore.
Not sure what you read. You could manually transfer all your photos AND catalog file from one computer to another, and if you get all the details right, everything still works! But the onus is on you to get all the details right.
It sounded like after writing all the metadata those images could be File/Get Photos... intoPSE. But I also saw there may be a need to use the Keyword Tags/+/Save Keyword Tags to File function as well.
Writing metadata to files does not let you rebuild your catalog completely. There is information in your catalog that will never be written to the files themselves. In fact, writing metadata to the photo files was NEVER intended to be a backup method; it was intended to be a method to allow PSE to communicate SOME information with other applications (like Flickr). So, should you want to make a backup, metadata is not the way to go. If you want multiple backup approaches, use the PSE method, and also make copies of your catalog file and photos using some other automated method.
I used the File/ 'Write Keywords and Properties... ' function to write all the metadata back into all of my files.That seems like a good idea because I use multiple file backup approaches. Is there a way to get
PSE to always write that info into a file anytime it changes? Like when I'm adding a tag?
There is no way to automate this.

TS1368 I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.

I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
Can you help please?

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

I cannot open Adobe photoshop CS2 which I was using 10 days ago. Can I restore the system to before 10 days, so it will work again?

I cannot open Adobe photoshop CS2 which I was using 10 days ago. Can I restore the system to before 10 days, so it will work again?

The hatter wrote:
Rosetta can have a 2GB RAM "tax" to manage PowerPC code as well as how that affects performance.
I think real world performance shows both statements to be wrong; consider this:
If that were the case, how come Apple does not include that information in its Snow Leopard installation requirements, since Rosetta is an optional install?
Also, running a PowerPC app on an 2011 i7 Mac with Snow Leopard will run faster than running that PowerPC app on a PowerPC Mac.

Which statement is used to move identically named fields between structures

Similar Messages

Maybe you are looking for