While Logminer practice i am facing some errer

hi Very Good morning to Al
l
i m kashif ahmed from UAE (sharjah) i am new Oracle DBA i need help to all of you i was doing logminer demo practice while it i face some errors . please can any one tell me how can i solve these errors :-
BEGIN DBMS_LOGMNR.add_logfile (options => DBMS_LOGMNR.new, logfilename => '/u02
/oradata/logmnr/archive/arch_1_112.arc'); END;
ERROR at line 1:
ORA-01284: file /u02/oradata/logmnr/archive/arch_1_112.arc cannot be opened
ORA-00308: cannot open archived log
'/u02/oradata/logmnr/archive/arch_1_112.arc'
ORA-27041: unable to open file
SVR4 Error: 13: Permission denied
Additional information: 2
This is error come after execute this query which is mention bleow :-
SQL> execute DBMS_LOGMNR.add_logfile (options => DBMS_LOGMNR.new, logfilename -
=> '/u02/oradata/logmnr/archive/arch_1_112.arc');
This is my archive file status
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /u02/oradata/logmnr/archive
Oldest online log sequence 114
Next log sequence to archive 116
Current log sequence 116
thanks i will be thank full of all of you
thnaks and bestregards
kashif ahmed

'/u02/oradata/logmnr/archive/arch_1_112.arc'*> ORA-27041: unable to open file*
*> SVR4 Error: 13: Permission denied*
Additional information: 2
Check the file permissions.

Similar Messages

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Facing some issue regarding Requisition interface table

I am facing some issue regarding Requisition interface table..
Purpose: we have to massage data & create massage data & create Requisitions.
Issue Detail:
Before:
Previously it was Auto Create Purchase Requisition
On the move transaction form step 10 to 20, this step will trigger creation of requisition.
and Creating Requisition successfully.
After:
After stopping Auto Create Purchase Requisition functionality the Requisition interface data is not getting populated in the Requisition Interface tables as well.
Please provide your inputs.

It's standard functionality not to populate the req interface while you don't want to autocreate.
Thanks,
PS.

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

We are facing some probelms with reports6i

hai,
I am facing some probelms with reports6i.
1.when i try to mail one report it is coming in the 'eps' format.how
can i open this format.
2.we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It say
an error like Umimplemented Error (rep-0999)
3.In one report we are using clob field.but when we take the print output of
this field some of the characters are missing in paper.the problem what we
think is that, there is no entre key padding when a word wrap is
occuring.We have to give it manually which is not applicable in all
cases.Please give some methods to solve these probelms.
Please treat this as an urgent matter.
thanking you,
dilip

If you have not set desformat you will get a file format determined by the driver of your default printer (even though you are not printing !). The file extension always seems to be .eps regardless of whether it is actually an eps (postscript) file.
You can get other formats eg. pdf by setting desformat.
If you do want to work with eps files you can download 'Ghostscript and GSView' which can display and convert them.

HT204406 I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

You will need to locate where you itunes library is and then relink one of the songs, itunes will do the rest. So if your itunes library is on an external hard drive or something like that. When you get the error message click yes you would like to locate it. then navigate to the external hard drive where the itunes libray is and locate that particular song. Once you have linked one, itunes will ask if you would like it to locate the rest, click yes and it will find the rest of the files if they are in the same location.

I am facing some problem with my ipod videos

I am facing some problem with my ipod videos

Because many apps are not compatible with your old device
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

I had recently purchased a iphone 5s in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?

I had recently purchased a iphone 5s with OS version 7.1.2 in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?

No. The iPhone warranty is not international. You will need to have warranty service done in Oman.

A Full DTP is converted into delta DTP and facing some data problem

Recently Full DTP(DSO to DSO) is converted into delta DTP , we are facing some data problem in first request.Some data in D2 are not updated properly after just converted in full to delta. Please let me know if you have any idea.
Example :
DSO : D1
DSO : D2
Previously FULL DTP D1->D2
Now Delta DTP D1->D2

Hi,
First time run of delta DTP will extract all the records from the source...
As u have already run the Full load and followed by delta,i guess u can use direct change log option...
rgds,

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

Facing some langauge issue in Workitem Text transalation

HI Experts,
I am facing some problem in a Custom workflow created by me. The scenario is like that, I have to show the Doc_nam in the WORKITEM TEXT dynamically, which I have picked from the container element and this Doc_name in linked withe Business Object APPR_DOC.
Now the workitem is sent to the approver. If the approver is logged in EN ( English) lang, then I found the workitem text along with Doc_name is displayed dynamically as per the requirement. But if the approver is logged on in IT(Italian) then, I found that the workitem text is sent as it is, i.e. ' Approve &_WI_OBJECT_ID.DOCUMENTNAME& '. This is happening in the same client for different log on's with different Langs.
I have tried all the possible way like Maintaining translation in SE63, Maintaining the Personal settings and many more. but could not find the way to solve the issue.
Can anybody guide me the right way to solve the issue?
Thanks & Regards,
Sriyash

First of all, make sure that the attribute is translated. Log in to the system for example in italian and open SWO1 and object APPR_DOC. Instantiate one object, and see whether the DOCUMENTNAME attribute gets translated.
You might also want to check if these document names are event translated. They are most probably translated somewhere in SPRO. Maybe you need to log in to the system with other languages and maintain the object names in that way to get them translated. Anyhow, I am not sure about this part - your functional consultant might know this better.
Regards,
Karri

Why after "placing" a PS CC image in ID CC can't I open it in PS CC (while still in ID) to make some

Why after "placing" a PS CC image in ID CC can't I open it in PS CC (while still in ID) to make some corrections by double clicking and holding down the alt button?

Hi,
For Photoshop CC to open up by default on double clicking on an image (with Alt key pressed), Photoshop CC should be the default application to open the image file. Right click on image file on your system and select Get Info. In the "Open with:" field select Photoshop CC and click on Change All button just beneath it.
Now try double clicking on any image(with Alt key pressed) placed in InDesign , it should open in Photoshop. Please let me know if this works for you or not.
Regards,
Pooja
InDesign Engineering

HT1529 I have brought my MAC laptop yesterday (6th of Aug'12) . Now i am facing some problem on this Macbook Pro.

I have brought my MAC laptop yesterday (6th of Aug'12) . Now i am facing some problem on this Macbook Pro. after starting my laptop it makes sound for 4/5 mintues then again it off this sound . this is recuring each 4/5 hours .
Could you give any suggession regarding this problem , i have talked with Apple care support team . but didnt get proper response too .
My Serial no C17HD8UKDV13
Regards Hamid , [email protected]

Hamid,
All new machines are under a 12 month warranty. You may have extended that through Apple care but it is not relevant here. Return it to the place of purchase (hopefully it was an Apple store or premium re-seller) and insist on their attention.
I'm sure you will be polite about it.

HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

Hafizur Rahman wrote:
when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

While Logminer practice i am facing some errer

Similar Messages

Maybe you are looking for